IFRS overview 2019
2  PwC | IFRS overview 2019
Introduction 4
Accounting rules and principles 5
Accounting principles and applicability of IFRS 6
First-time adoption of IFRS – IFRS 1 7
Presentation of financial statements – IAS 1 8
Accounting policies, accounting estimates and errors – IAS 8 10
Fair value – IFRS 13 11
Financial instruments 12
Foreign currencies – IAS 21, IAS 29 16
Insurance contracts – IFRS 4, IFRS 17 18
Revenue and construction contracts –IFRS 15 and IAS 20 19
Segment reporting – IFRS 8 23
Employee benefits – IAS 19 24
Share-based payment – IFRS 2 26
Taxation – IAS 12, IFRIC 23 27
Earnings per share – IAS 33 28
Balance sheet and related notes 29
Intangible assets – IAS 38 30
Property, plant and equipment – IAS 16 31
Investment property – IAS 40 32
Impairment of assets – IAS 36 33
Lease accounting – IAS 17, IFRS 16 34
Inventories – IAS 2 35
Provisions and contingencies – IAS 37 36
Events after the reporting period and financial commitments – IAS 10 38
Share capital and reserves 39
Consolidated and separate financial statements 40
Consolidated financial statements – IFRS 10 41
Separate financial statements – IAS 27 42
Business combinations – IFRS 3 43
Disposal of subsidiaries, businesses and non-current assets – IFRS 5 44
Equity accounting – IAS 28 45
Joint arrangements – IFRS 11 46
Other subjects 47
Related-party disclosures – IAS 24 48
Contents
3  PwC | IFRS overview 2019
Cash flow statements – IAS 7 49
Interim financial reporting – IAS 34 50
Service concession arrangements – SIC 29 and IFRIC 12 51
Industry-specific topics 52
Agriculture – IAS 41 53
Extractive industries – IFRS 6 and IFRIC 20 54
Index by standard and interpretation 55
4  PwC | IFRS overview 2019
Introduction
This ‘IFRS overview’ provides a summary of the recognition and measurement requirements of
International Financial Reporting Standards (IFRSs) issued by the International Accounting
Standards Board (IASB) up to October 2018.
The information in this guide is arranged in six sections:
 Accounting principles;
 Income statement and related notes;
 Balance sheet and related notes;
 Consolidated and separate financial statements;
 Other subjects; and
 Industry-specific topics.
More detailed guidance and information on these topics can be found on inform.pwc.com in the
‘Accounting topic home pages’ and in the ‘IFRS Manual of accounting’. Click on each heading to
visit its topic home page on Inform.
5  PwC | IFRS overview 2019
Accounting rules and
principles
6  PwC | IFRS overview 2019
Accounting principles and
applicability of IFRS
The IASB has the authority to set IFRS and to approve interpretations of those standards.
IFRS is intended to be applied by profit-orientated entities. These entities' financial statements give information
about performance, position and cash flow that is useful to a range of users in making financial decisions. These
users include primary users: existing and potential investors, lenders, and other creditors, and other users:
employees, suppliers, customers, governments and their agencies, regulators and the public, might find general
purpose financial reports useful.
The concepts underlying accounting practices under IFRS are set out in the IASB's 'Conceptual Framework for
Financial Reporting’ issued in March 2018 (the Framework). The main sections of the Framework are:
 Status and purpose of the Conceptual Framework;
 The objective of general purpose financial reporting;
 Qualitative characteristics of useful financial information;
 Financial statements and the reporting entity;
 The elements of financial statements;
 Recognition and derecognition;
 Measurement;
 Presentation and disclosure;
 Concepts of capital and capital maintenance; and
 Appendix – Defined terms.
7  PwC | IFRS overview 2019
First-time adoption of IFRS –
IFRS 1
An entity moving from national GAAP to IFRS should apply the requirements of IFRS 1. It applies to an entity’s first
IFRS financial statements and the interim reports presented under IAS 34, ‘Interim financial reporting’, that are part
of that period. It also applies to entities under ‘repeated first-time application’. The basic requirement is for full
retrospective application of all IFRSs effective at the reporting date. However, there are a number of optional
exemptions and mandatory exceptions to the requirement for retrospective application.
The optional exemptions cover standards for which the IASB considers that retrospective application could prove
too difficult or could result in a cost likely to exceed any benefits to users. Any, all or none of the optional
exemptions could be applied.
The optional exemptions relate to:
 Business combinations;
 Deemed cost;
 Cumulative translation differences;
 Compound financial instruments;
 Assets and liabilities of subsidiaries, associates and joint ventures;
 Designation of previously recognised financial instruments;
 Share-based payment transactions;
 Insurance contracts;
 Fair value measurement of financial assets or financial liabilities at initial recognition;
 Decommissioning liabilities included in the cost of property, plant and equipment;
 Leases;
 Financial assets or intangible assets accounted for in accordance with IFRIC 12;
 Borrowing costs;
 Investments in subsidiaries, joint ventures and associates;
 Designation of contracts to buy or sell a non-financial item;
 Customer contracts;
 Extinguishing financial liabilities with equity instruments;
 Regulatory deferral accounts (IFRS 14);
 Severe hyperinflation;
 Joint arrangements; and
 Stripping costs in the production phase of a surface.
The mandatory exceptions cover areas in which retrospective application of the IFRS requirements is considered
inappropriate. The following exceptions are mandatory, not optional:
 Estimates;
 Hedge accounting;
 Derecognition of financial assets and liabilities;
 Non-controlling interests;
 Classification and measurement of financial assets (IFRS 9);
 Embedded derivatives (IFRS 9/IAS 39);
 Impairment of financial assets; and
 Government loans.
Certain reconciliations from previous GAAP to IFRS are also required.
8  PwC | IFRS overview 2019
Presentation of financial
statements – IAS 1
The objective of financial statements is to provide information that is useful in making economic decisions. IAS 1’s
objective is to ensure comparability of presentation of that information with the entity’s financial statements of
previous periods and with the financial statements of other entities.
Financial statements are prepared on a going concern basis, unless management intends either to liquidate the
entity or to cease trading, or has no realistic alternative but to do so. Management prepares its financial statements,
except for cash flow information, under the accrual basis of accounting.
There is no prescribed format for the financial statements, but there are minimum presentation and disclosure
requirements. The implementation guidance to IAS 1 contains illustrative examples of acceptable formats.
Financial statements disclose corresponding information for the preceding period (comparatives), unless a
standard or interpretation permits or requires otherwise.
Statement of financial position (balance sheet)
The statement of financial position presents an entity's financial position at a specific point in time. Subject to
meeting certain minimum presentation and disclosure requirements, management uses its judgement regarding the
form of presentation, which sub-classifications to present and which information to disclose on the face of the
statement or in the notes.
The following items, as a minimum, are presented on the face of the balance sheet:
 Assets – Property, plant and equipment; investment property; intangible assets; financial assets; investments
accounted for using the equity method; biological assets; deferred tax assets; current tax assets; inventories;
trade and other receivables; and cash and cash equivalents.
 Equity – Issued capital and reserves attributable to the parent’s owners; and non-controlling interest.
 Liabilities – Deferred tax liabilities; current tax liabilities; financial liabilities; provisions; and trade and other
payables.
 Assets and liabilities held for sale – The total of assets classified as held for sale and assets included in
disposal groups classified as held for sale; and liabilities included in disposal groups classified as held for sale
in accordance with IFRS 5.
Current and non-current assets, and current and non-current liabilities, are presented as separate classifications in
the statement, unless presentation based on liquidity provides information that is reliable and more relevant.
Statement of comprehensive income
The statement of comprehensive income presents an entity’s performance over a specific period. An entity
presents profit or loss, total other comprehensive income and comprehensive income for the period. [IAS
1 para 81A].
Entities have a choice of presenting the statement of comprehensive income in a single statement or as two
statements. The statement of comprehensive income under the single-statement approach includes all items of
income and expense, and it includes each component of other comprehensive income classified by nature. Under
the two-statement approach, all components of profit or loss are presented in an income statement. The income
statement is followed immediately by a statement of comprehensive income, which begins with the total profit or
loss for the period and displays all components of other comprehensive income.
Items to be presented in statement of comprehensive income
The following items of profit or loss are, as a minimum, presented in the statement of comprehensive income:
 Revenue, presenting separately interest revenue calculated using the effective interest method.
 Gains and losses arising from the de-recognition of financial assets measured at amortised cost.
 Finance costs.
 Impairment losses (including reversals of impairment losses or impairment gains) determined in accordance
with Section 5.5 of IFRS 9.
 Share of the profit and loss of associates and joint ventures accounted for using the equity method.
9  PwC | IFRS overview 2019
 If a financial asset is reclassified out of the amortised cost measurement category so that it is measured at fair
value through profit or loss, any gain arising from a difference between the previous amortised cost of the
financial asset and its fair value at the reclassification date (as defined in IFRS 9).
 If a financial asset is reclassified out of the fair value through other comprehensive income measurement
category so that it is measured at fair value through profit or loss, any cumulative gain or loss previously
recognised in other comprehensive income that is reclassified to profit or loss.
 Tax expense
 A single amount for the total of discontinued operations. This comprises the total of:
 The post-tax profit or loss of discontinued operations; and
 The post-tax gain or loss recognised on the measurement to fair value less costs to sell or on the disposal
of the assets or disposal group(s) constituting the discontinued operation.
Additional line items or sub-headings are presented in this statement where such presentation is relevant to an
understanding of the entity’s financial performance.
Material items
The nature and amount of items of income and expense are disclosed separately, where they are material.
Disclosure could be in the statement or in the notes. Such income and expenses might include: restructuring costs;
write-downs of inventories or property, plant and equipment; litigation settlements; and gains or losses on disposals
of non-current assets.
Other comprehensive income
An entity presents items of other comprehensive income grouped into those that will be reclassified subsequently
to profit or loss, and those that will not be reclassified. An entity discloses reclassification adjustments relating to
components of other comprehensive income. The IAS 1 amendments clarify that the entity’s share of items of
comprehensive income of associates and joint ventures is presented separately, analysed into those items that
will not be reclassified subsequently to profit or loss and those that will be so reclassified when specific conditions
are met.
An entity presents each component of other comprehensive income in the statement either (i) net of its related tax
effects, or (ii) before its related tax effects, with the aggregate tax effect of these components shown separately.
Statement of changes in equity
The following items are presented in the statement of changes in equity:
 Total comprehensive income for the period, showing separately the total amounts attributable to the parent’s
owners and to non-controlling interest.
 For each component of equity, the effects of retrospective application or retrospective restatement recognised
in accordance with IAS 8.
 For each component of equity, a reconciliation between the carrying amount at the beginning and the end of
the period, separately disclosing changes resulting from:
 Profit or loss;
 Other comprehensive income; and
 Transactions with owners in their capacity as owners, showing separately contributions by and distributions
to owners and changes in ownership interests in subsidiaries that do not result in a loss of control.
The amounts of dividends recognised as distributions to owners during the period, and the related amount of
dividends per share, should be disclosed.
Statement of cash flows
Cash flow statements are addressed in a separate summary dealing with the requirements of IAS 7.
Notes to the financial statements
The notes are an integral part of the financial statements. Notes provide information additional to the amounts
disclosed in the ‘primary’ statements. They also include significant accounting policies, critical accounting estimates
and judgements, and disclosures on capital and puttable financial instruments classified as equity.
10  PwC | IFRS overview 2019
Accounting policies,
accounting estimates and
errors – IAS 8
An entity follows the accounting policies required by IFRS that are relevant to the transactions, other events and
conditions of the entity. Sometimes standards offer a policy choice; there are other situations where no guidance is
given by IFRSs. In these situations, management should develop and apply appropriate accounting policies.
Management uses judgement in developing and applying an accounting policy that results in information that is
relevant and reliable. Reliable information demonstrates the following qualities: faithful representation, substance
over form, neutrality, prudence and completeness. If there is no IFRS standard or interpretation that is specifically
applicable, management considers the applicability of the requirements in IFRS on similar and related issues, and
then the definitions, recognition criteria and measurement concepts for assets, liabilities, income and expenses in
the Framework. Management can also consider the most recent pronouncements of other standard-setting bodies,
other accounting literature and accepted industry practices, where these do not conflict with IFRS.
Accounting policies are applied consistently to similar items, transactions and events (unless a standard permits or
requires otherwise).
Changes in accounting policies
Changes in accounting policies made on adoption of a new standard or interpretation are accounted for in
accordance with the transitional provisions (if any) within that standard or interpretation. If a change in policy upon
initial application of a new standard does not include specific transitional provisions, or it is a voluntary change in
policy, it should be accounted for retrospectively (that is, by restating all comparative figures presented) unless this
is impracticable. There is also a specific exception for the initial adoption of a policy to measure property, plant and
equipment or intangible assets by applying the revaluation model, which would be accounted for in the year the
change is being made.
Issue of new/revised standards not yet effective
Standards are normally published in advance of the required implementation date. In the intervening period, where
a new/revised standard that is relevant to an entity has been issued but is not yet effective, management discloses
this fact. It also provides the known or reasonably estimable information relevant to assessing the impact that the
application of the standard might have on the entity's financial statements in the period of initial recognition.
Changes in accounting estimates
An entity recognises changes in accounting estimates prospectively, by including the effects in profit or loss in the
period that is affected (the period of the change and future periods, if applicable), except where the change in
estimate gives rise to changes in assets, liabilities or equity. In this case, it is recognised by adjusting the carrying
amount of the related asset, liability or equity in the period of the change.
Errors
Errors might arise from mistakes (mathematical or application of accounting policies), oversights or
misinterpretation of facts, and fraud.
Errors that are discovered in a subsequent period are prior-period errors. Material prior-period errors are adjusted
retrospectively (that is, by restating comparative figures) unless this is impracticable (that is, it cannot be done, after
‘making every reasonable effort to do so’).
11  PwC | IFRS overview 2019
Fair value – IFRS 13
IFRS 13, ‘Fair value management’, provides a common framework for measuring fair value where required or
permitted by another IFRS.
IFRS 13 defines fair value as ‘The price that would be received to sell an asset or paid to transfer a liability in an
orderly transaction between market participants at the measurement date’. The key principle is that fair value is the
exit price, from the perspective of market participants who hold the asset or owe the liability, at the measurement
date. It is based on the perspective of market participants rather than the entity itself, so fair value is not affected by
an entity’s intentions towards the asset, liability or equity item that is being fair valued.
A fair value measurement requires management to determine four things: the particular asset or liability that is the
subject of the measurement (consistent with its unit of account); the highest and best use for a
non-financial asset; the principal (or, in its absence, the most advantageous) market; and the valuation technique.
IFRS 13 addresses how to measure fair value, but it does not stipulate when fair value can or should be used.
12  PwC | IFRS overview 2019
Financial instruments
Introduction to financial instruments – Objectives, definitions and scope –
IAS 32, IAS 39, IFRS 9 and IFRS 7
For periods beginning on or after 1 January 2018, IFRS 9 is required to be applied in full. But, when an entity first
applies IFRS 9, as an accounting policy choice, it can apply the hedge accounting requirements of IAS 39 instead
of the hedge accounting requirements included in IFRS 9.
The objective of the four financial instruments standards (IAS 32, IAS 39, IFRS 9 and IFRS 7) is to establish
requirements for all aspects of accounting for financial instruments, including distinguishing debt from equity,
balance sheet offsetting, recognition, derecognition, measurement, hedge accounting and disclosure.
The standards’ scope is broad. The standards cover all types of financial instruments, including receivables,
payables, investments in bonds and shares, borrowings and derivatives. They also apply to certain contracts to buy
or sell non-financial assets (such as commodities) that can be net-settled in cash or another financial instrument.
Financial instruments are recognised and measured according to IAS 39/IFRS 9’s requirements and are disclosed
in accordance with IFRS 7.
For annual reporting periods beginning on or after 1 January 2018 IFRS 9 replaces IAS 39. However for some
preparers IAS 39 will remain relevant (for example insurers that apply the IFRS 4 deferral of IFRS 9). On transition
to IFRS 9 entities may also continue to apply IAS 39 hedge accounting.
In addition, requirements for fair value measurement and disclosures are covered by IFRS 13.
IAS 32 establishes principles for presenting financial instruments as financial liabilities or equity, and for offsetting
financial assets and financial liabilities.
Financial instruments represent contractual rights or obligations to receive or pay cash or other financial assets.
A financial asset is cash; a contractual right to receive cash or another financial asset; a contractual right to
exchange financial assets or liabilities with another entity under conditions that are potentially favourable; or an
equity instrument of another entity.
A financial liability is a contractual obligation to deliver cash or another financial asset; or to exchange financial
instruments with another entity under conditions that are potentially unfavourable.
An equity instrument is any contract that evidences a residual interest in the entity’s assets after deducting all of its
liabilities.
A derivative is a financial instrument that derives its value from an underlying price or index; requires little or no
initial net investment; and is settled at a future date.
Classification and measurement – IFRS 9
The publication of IFRS 9 in July 2014 was the culmination of the IASB’s efforts to replace IAS 39. IFRS 9 was
released in phases from 2009 to 2014. The final standard was issued in July 2014, with a proposed mandatory
effective date of periods beginning on or after 1 January 2018. Early application of IFRS 9 is permitted. The Board
also amended the transitional provisions to provide relief from restating comparative information and introduced
new disclosures to help users of financial statements understand the effect of moving to the IFRS 9 classification
and measurement model. The board also included an amendment in relation to prepayment features with negative
compensations. These amendments are effective from 1 January 2019 and allows companies to measure
particular prepayable financial assets with so-called negative compensation at amortised cost or at fair value
through other comprehensive income if a specified condition is met – Instead of at fair value through profit or loss.
Classification and measurement
IFRS 9 replaces the multiple classification and measurement models for financial assets in IAS 39 with a single
model that has three classification categories: amortised cost; fair value through other comprehensive income
(OCI); and fair value through profit and loss. Classification under IFRS 9 is driven by the entity’s business model for
managing the financial assets and whether the contractual characteristics of the financial assets represent solely
payments of principal and interest. However, at initial recognition an entity can irrevocably designate a financial
asset as measured at fair value through profit and loss, if doing so eliminates or significantly reduces an
accounting mismatch.
13  PwC | IFRS overview 2019
The new standard removes the requirement to separate embedded derivatives from financial asset hosts. It
requires a hybrid contract to be classified, in its entirety, at either amortised cost or fair value if the contractual cash
flows do not represent solely payments of principal and interest. IFRS 9 prohibits reclassifications, except in rare
circumstances when the entity’s business model changes. There is specific guidance for contractually linked
instruments that leverage credit risk, which is often the case with investment tranches in a securitisation.
IFRS 9’s classification principles indicate that all equity investments should be measured at fair value through profit
and loss. However, an entity has the ability to make an irrevocable election, on an instrument-by-instrument basis,
to present changes in fair value in other comprehensive income (OCI) rather than profit or loss, provided that the
instrument is not held for trading. IFRS 9 removes the cost exemption for unquoted equities and derivatives on
unquoted equities, but it provides guidance on when cost might be an appropriate estimate of fair value.
Under IFRS 9, financial liabilities continue to be measured at amortised cost, unless they are required to be
measured at fair value through profit or loss or an entity has opted to measure a liability at fair value through profit
or loss. However, IFRS 9 changes the accounting for those financial liabilities where the fair value option has
been elected. For such liabilities, changes in fair value related to changes in own credit risk are presented
separately in OCI.
Embedded derivatives – IFRS 9
Some financial instruments and other contracts combine a derivative and a non-derivative host contract in a single
contract. The derivative part of the contract is referred to as an ‘embedded derivative’. Its effect is that some of the
contract’s cash flows vary in a similar way to a stand-alone derivative. For example, the principal amount of a bond
might vary with changes in a stock market index. In this case, the embedded derivative is an equity derivative on
the relevant stock market index.
A financial asset host that is within the scope of IFRS 9 is not assessed for embedded derivatives, because the
solely payments of principal and interest (SPPI) criterion is applied to the entire hybrid contract to determine the
appropriate measurement category. Embedded derivatives that are not 'closely related' to the host contract are
separated and accounted for as stand-alone derivatives (that is, measured at fair value, with changes in fair value
recognised in profit or loss). An embedded derivative is not 'closely related' if its economic characteristics and risks
are different from those of the rest of the contract. IFRS 9 sets out many examples to help determine when this test
is (and is not) met.
Analysing contracts for potential embedded derivatives is one of the more challenging aspects of IFRS 9.
Financial liabilities and equity – IAS 32, IFRS 9
The classification of a financial instrument by the issuer as either a liability (debt) or equity can have a
significant impact on an entity’s gearing (debt-to-equity ratio) and reported earnings. It could also affect the entity’s
debt covenants.
The critical feature of a liability is that, under the terms of the instrument, the issuer is or can be required to deliver
either cash or another financial asset to the holder; it cannot avoid this obligation. For example, a debenture under
which the issuer is required to make interest payments and redeem the debenture for cash is a financial liability.
An instrument is classified as equity where it represents a residual interest in the issuer’s assets after deducting all
of its liabilities; or, put another way, where the issuer has no obligation under the terms of the instrument to deliver
cash or other financial assets to another entity. Ordinary shares, where all of the payments are at the discretion of
the issuer, are an example of equity of the issuer.
In addition, the following types of financial instrument are accounted for as equity, provided that they have
particular features and meet specific conditions:
 Puttable financial instruments (for example, some shares issued by co-operative entities, funds and some
partnership interests).
 Instruments or components of instruments that impose on the entity an obligation to deliver to another party a
pro rata share of the net assets of the entity only on liquidation (for example, some shares issued by limitedlife
entities).
The classification of the financial instrument as either debt or equity is based on the substance of the contractual
arrangement of the instrument, rather than its legal form. This means, for example, that a redeemable preference
share, which is economically the same as a bond, is accounted for in the same way as a bond. The redeemable
preference share is therefore treated as a liability rather than equity, even though legally it is a share of the issuer.
Other instruments might not be as straightforward. An analysis of the terms of each instrument (in light of the
detailed classification requirements) is necessary, particularly since some financial instruments contain both liability
and equity features. Such instruments (such as bonds that are convertible into a fixed number of equity shares) are
accounted for as separate components of liability and equity (being the option to convert if all of the criteria for
equity are met).
14  PwC | IFRS overview 2019
The treatment of interest, dividends, losses and gains in the income statement follows the classification of the
related instrument. If a preference share is classified as a liability, its coupon is shown as interest. However, the
discretionary coupon on an instrument that is treated as equity is shown as a distribution within equity.
Recognition and derecognition – IAS 39, IFRS 9 Recognition
Recognition for financial assets and financial liabilities tends to be straightforward. An entity recognises a financial
asset or a financial liability at the time when it becomes a party to a contract.
Derecognition
Derecognition is the term used for ceasing to recognise a financial asset or financial liability on an entity’s
statement of financial position. These rules are more complex.
Assets
Financial assets are derecognised when the rights to receive cash flows from the financial assets have expired or
have been transferred and the entity has transferred substantially all the risks and rewards of ownership. If the
entity neither retains nor transfers substantially all the risks and rewards, but has not retained control of the
financial assets, it also derecognises the financial assets. When control of the transferred financial asset is
retained, the accounting can be complex.
Liabilities
An entity may only cease to recognise (derecognise) a financial liability when it is extinguished – that is, when the
obligation is discharged, cancelled or expired, or when the debtor is legally released from the liability by law or by
the creditor agreeing to such a release.
Entities frequently negotiate with bankers or bond-holders to amend or cancel existing debt and replace it with new
debt with the same lender on different terms. IAS 39 and IFRS 9 provides guidance to distinguish between the
settlement or extinguishment of determine whether debt that is replaced by new debt and the restructuring or
modification of existing debt should be accounted for as an extinguishment of the original financial liability. The
distinction is based on whether or not the new debt has substantially different terms from the old debt.
Alternatively, an entity might negotiate with its third party lenders to exchange existing debt for equity. In these
circumstances, the difference between the carrying amount of the financial liability extinguished and the fair value
of the equity issued is recognised in the income statement.
Impairment – IFRS 9
The impairment rules of IFRS 9 introduce a new, forward-looking, expected credit loss (‘ECL’) impairment model
which will generally result in earlier recognition of losses compared to IAS 39. These changes are likely to have a
significant impact on entities that have significant financial assets (in particular, financial institutions).
The new impairment model introduces a three-stage approach. Stage 1 includes financial instruments that have not
had a significant increase in credit risk since initial recognition or that have low credit risk at the reporting date. For
these assets, 12-month ECL (that is, expected losses arising from the risk of default in the next 12 months) are
recognised, and interest revenue is calculated on the gross carrying amount of the asset (that is, without deduction
for credit allowance). Stage 2 includes financial instruments that have had a significant increase in credit risk since
initial recognition (unless they have low credit risk at the reporting date) but are not credit-impaired. For these
assets, lifetime ECL (that is, expected losses arising from the risk of default over the life of the financial instrument)
are recognised, and interest revenue is still calculated on the gross carrying amount of the asset. Stage 3 consists
of financial assets that are credit-impaired, which is where one or more events that have a detrimental impact on
the estimated future cash flows of the financial asset have occurred. For these assets, lifetime ECL are also
recognised, but interest revenue is calculated on the net carrying amount (that is, net of the ECL allowance).
For trade receivables or contract assets that do not contain a significant financing component, the loss allowance
should be measured, at initial recognition and throughout the life of the receivable, at an amount equal to lifetime
ECL. As an exception to the general model, if the credit risk of a financial instrument is low at the reporting date,
management can measure impairment using 12-month ECL, and so it does not have to assess whether a
significant increase in credit risk has occurred.
In many cases, application of the new requirements will require significant judgement – in particular, when
assessing whether there has been a significant increase in credit risk (triggering a move from stage 1 to stage 2,
and a consequential increase from 12-month ECL to lifetime ECL) and in estimating ECL, including the effect of
forward-looking information. IFRS 9 also introduces significant new disclosure requirements.
15  PwC | IFRS overview 2019
Hedge accounting – IFRS 9, IAS 39
‘Hedging’ is a risk management activity. More specifically, it is the process of using a financial instrument (usually a
derivative) to mitigate all or some of the risk of a hedged item. ‘Hedge accounting’ changes the timing of recognition
of gains and losses on either the hedged item or the hedging instrument, so that both are recognised in profit or
loss in the same accounting period, in order to record the economic substance of the combination of the hedged
item and hedging instrument. On transition to IFRS 9 entities may also continue to apply IAS 39 hedge accounting.
To qualify for hedge accounting, IFRS 9 includes the following requirements:
 An entity should formally designate and document the hedging relationship at the inception of the hedge. This
includes identifying the hedging instrument, the hedged item or transaction, the nature of the risk being hedged
and how the entity will assess hedge effectiveness, identification of sources of ineffectiveness, how the hedge
ratio will be determined, and the entity’s risk management objective and strategy for undertaking the hedge.
 There must be an economic relationship between the hedging instrument and the hedged item. There must be
an expectation that the value of the hedging instrument and the value of the hedged item will move in the
opposite direction as a result of the common underlying or hedged risk.
 Credit risk should not dominate value changes. Even if there is an economic relationship, a change in the credit
risk of the hedging instrument or the hedged item must not be of such magnitude that it dominates the value
changes that result from that economic relationship.
 The designated hedge ratio should be consistent with the risk management strategy. The hedge ratio is defined
as the relationship between the quantity of the hedging instrument and the quantity of the hedged item, in terms
of their relative weighting.
There is no 80–125% effectiveness ‘bright line’. As such, a retrospective effectiveness test is no longer required to
prove that the effectiveness was between 80% and 125%. However, all ineffectiveness should still be calculated
and recorded in the income statement.
There are three types of hedge relationship:
 Fair value hedge – A hedge of the exposure to changes in the fair value of a recognised asset or liability, or a
firm commitment.
 Cash flow hedge – A hedge of the exposure to variability in cash flows of a recognised asset or liability, a firm
commitment or a highly probable forecast transaction.
 Net investment hedge – A hedge of the foreign currency risk on a net investment in a foreign operation.
For a fair value hedge, the hedged item is adjusted for the gain or loss attributable to the hedged risk. That element
is included in the income statement, where it will offset the gain or loss on the hedging instrument.
For a cash flow hedge, gains and losses on the hedging instrument are initially included in other comprehensive
income. The amount included in other comprehensive income is the lower of the fair value change of the hedging
instrument and that of the hedged item. Where the hedging instrument has a fair value change greater than the
hedged item, the excess is recorded within profit or loss as ineffectiveness. Gains or losses deferred in other
comprehensive income are reclassified to profit or loss when the hedged item affects the income statement. If the
hedged item is the forecast acquisition of a non-financial asset or liability, the carrying amount of the non-financial
asset or liability is adjusted for the hedging gain or loss at initial recognition.
Hedges of a net investment in a foreign operation are accounted for similarly to cash flow hedges.
Disclosure – IFRS 7, IFRS 9
There have been significant developments in risk management concepts and practices in recent years. New
techniques have evolved for measuring and managing exposures to risks arising from financial instruments. This,
coupled with the significant volatility experienced in the financial markets, has increased the need for more relevant
information and greater transparency about an entity’s exposures arising from financial instruments and how those
risks are managed. Financial statement users and other investors need such information to make more informed
judgements about risks arising from entities’ use of financial instruments and their associated returns.
IFRS 7 sets out disclosure requirements that are intended to enable users to evaluate the significance of financial
instruments for an entity’s financial position and performance, and to understand the nature and extent of risks
arising from those financial instruments to which the entity is exposed. These risks include credit risk, liquidity risk
and market risk. IFRS 13 requires disclosure of a three-level hierarchy for fair value measurement, and it requires
some specific quantitative disclosures for financial instruments at the lowest level in the hierarchy.
The disclosure requirements do not just apply to banks and financial institutions. All entities that have financial
instruments are affected – even simple instruments such as borrowings, accounts payable and receivable, cash
and investments.
16  PwC | IFRS overview 2019
Foreign currencies – IAS 21,
IAS 29
IAS 21
Many entities do business with overseas suppliers or customers, or have overseas operations. This gives rise to
two main accounting issues:
 Some transactions (for example, those with overseas suppliers or customers) might be denominated in foreign
currencies. These transactions are expressed in the entity’s own currency (‘functional currency’) for financial
reporting purposes.
 A parent entity might have foreign operations, such as overseas subsidiaries, branches or associates. The
functional currency of these foreign operations might be different from the parent entity’s functional currency,
and therefore the accounting records might be maintained in different currencies. Because it is not possible to
combine transactions measured in different currencies, the foreign operation’s results and financial position are
translated into a single currency, namely that in which the group’s consolidated financial statements are
reported (‘presentation currency’).
The methods required for each of the above circumstances are summarised below.
Expressing foreign currency transactions in the entity’s functional currency
A foreign currency transaction is expressed in an entity’s functional currency, using the exchange rate at the
transaction date. Foreign currency balances representing cash or amounts to be received or paid in cash
(‘monetary items’) are retranslated at the end of the reporting period, using the exchange rate on that date.
Exchange differences on such monetary items are recognised as income or expense for the period. Non-monetary
balances that are not remeasured at fair value and are denominated in a foreign currency are expressed in the
functional currency, using the exchange rate at the transaction date. Where a non-monetary item is remeasured at
fair value in the financial statements, the exchange rate at the date when fair value was determined is used.
Translating functional currency financial statements into a presentation
currency
Assets and liabilities are translated from the functional currency to the presentation currency at the closing rate at
the end of the reporting period. The income statement is translated at exchange rates at the dates of the
transactions, or at the average rate if that approximates the actual rates. All resulting exchange differences are
recognised in other comprehensive income.
The financial statements of a foreign operation that has the currency of a hyper-inflationary economy as its
functional currency are first restated in accordance with IAS 29, ‘Financial reporting in hyper-inflationary
economies’. All components are then translated to the presentation currency at the closing rate at the end of the
reporting period.
IAS 29
Conventional financial reporting is distorted by inflation. This is especially the case with hyper-inflation, where the
measuring unit (the currency unit) is not stable. Adjustments to stabilise the unit of measurement – to measure
items in units of constant purchasing power – make the financial statements more relevant and reliable. IAS 29
requires financial statements prepared in the currency of a hyper-inflationary economy to be stated in terms of the
value of money at the end of the reporting period. This requirement relies on an understanding of complex
economic concepts, a knowledge of the entity’s financial and operating patterns, and a detailed series of
procedures.
Prices change over time, as the result of political, economic and social factors. Two phenomena should be
distinguished: (1) changes in supply and demand and technological changes might cause prices of individual items
to increase or decrease independently of each other (‘specific price changes’); and (2) other factors in the economy
might result in changes in the general level of prices, and therefore in the general purchasing power of money
(‘general price changes’). The purchasing power of money declines as the level of prices of goods and services
rises. The purchasing power of money in an inflationary environment and the price level are interdependent.
Financial statements, unadjusted for inflation in most countries, are prepared on the basis of historical cost, without
regard either to changes in the general level of prices or to changes in specific prices of assets held. However,
there are exceptions where the entity is required to, or chooses to, measure certain assets or liabilities at fair value.
Examples are property, plant and equipment, which could be revalued to fair value under IAS 16, and biological
assets, which are generally required to be measured at fair value by IAS 41. This produces a meaningful result,
provided that there are no dramatic changes in the purchasing power of money.
17  PwC | IFRS overview 2019
Significant changes in the purchasing power of money, particularly in a hyper-inflationary economy, mean that
financial statements unadjusted for inflation are not useful and are likely to be misleading. Amounts are not
comparable between periods, or even within a period, and the gain or loss in general purchasing power that arises
in the reporting period is not recorded. Financial statements unadjusted for inflation do not properly reflect the
company’s position at the end of the reporting period, the results of its operations or its cash flows. In a hyperinflationary
economy, financial statements, whether they are based on an historical cost approach or a current
cost approach, are useful only if they are expressed in terms of the measuring unit current at the end of the
reporting period.
Inflation-adjusted financial statements are an extension to, and not a departure from, historical cost accounting. IAS
29 aims to overcome the limitations of historical cost financial reporting in hyper-inflationary environments, but it
does not reflect specific price changes in assets and liabilities.
18  PwC | IFRS overview 2019
Insurance contracts – IFRS 4,
IFRS 17
IFRS 4
Insurance contracts are contracts where an entity accepts significant insurance risk from another party (the
policyholder) by agreeing to compensate the policyholder if the insured event adversely affects the policyholder.
The risk transferred in the contract must be insurance risk, which is any risk except for financial risk.
IFRS 4 applies to all issuers of insurance contracts, whether or not the entity is legally an insurance company. It
does not apply to accounting for insurance contracts by policyholders.
IFRS 4 was designed as an interim standard, pending completion of IFRS 17. It allows entities to continue with their
existing accounting policies for insurance contracts if those policies meet certain minimum criteria. One of the
minimum criteria is that the amount of the insurance liability is subject to a liability adequacy test. This test
considers current estimates of all contractual and related cash flows. If the liability adequacy test identifies that the
insurance liability is inadequate, the entire deficiency is recognised in the income statement.
Accounting policies modelled on IAS 37, ‘Provisions, contingent liabilities and contingent assets’, are appropriate in
cases where the issuer is not an insurance company and where there is no specific local GAAP for insurance
contracts (or the local GAAP is only directed at insurance companies).
Disclosure is particularly important for information relating to insurance contracts, because entities can continue to
use local GAAP accounting policies for measurement. IFRS 4 has two main principles for disclosure. Entities
should disclose information that:
 Identifies and explains the amounts in its financial statements arising from insurance contracts; and
 Enables users of its financial statements to evaluate the nature and extent of risks arising from
insurance contracts.
IFRS 17
In May 2017, the IASB issued IFRS 17, ‘Insurance contracts’, and thereby started a new epoch of accounting for
insurers. Whereas the current standard, IFRS 4, allows insurers to use their local GAAP, IFRS 17 defines clear and
consistent rules that will significantly increase the comparability of financial statements. For insurers, the transition
to IFRS 17 will have an impact on financial statements and on key performance indicators.
Under IFRS 17, the ‘general model’ requires entities to measure an insurance contract, at initial recognition, at the
total of the fulfilment cash flows (comprising the estimated future cash flows, an adjustment to reflect the time value
of money and an explicit risk adjustment for non-financial risk) and the contractual service margin. The fulfilment
cash flows are remeasured on a current basis each reporting period. The unearned profit (contractual service
margin) is recognised over the coverage period.
Aside from this general model, the standard provides, as a simplification, the ‘premium allocation approach’.
This simplified approach is applicable for certain types of contract, including those with a coverage period of one
year or less.
For insurance contracts with direct participation features, the ‘variable fee approach’ applies. The variable fee
approach is a variation on the general model. When applying the variable fee approach, the entity’s share of the
fair value changes of the underlying items is included in the contractual service margin. As a consequence, the fair
value changes are not recognised in profit or loss in the period in which they occur but over the remaining life of
the contract.
The new standard is applicable for annual periods beginning on or after 1 January 2021. Early application is
permitted for entities that apply IFRS 9, ‘Financial instruments’, and IFRS 15, ‘Revenue from contracts with
customers’, at or before the date of initial application of IFRS 17. The standard can be applied retrospectively in
accordance with IAS 8, but it also contains a ‘modified retrospective approach’ and a ‘fair value approach’ for
transition, depending on the availability of data.
19  PwC | IFRS overview 2019
Revenue and construction
contracts –IFRS 15 and IAS
20
Revenue is the gross inflow of economic benefits arising in the ordinary course of an entity’s activities, and it is
measured at the fair value of the consideration received or receivable. Where the substance of a single transaction
indicates that it includes separately identifiable components, revenue is allocated to these components generally by
reference to their fair values. Revenue is recognised for each component separately by applying the recognition
criteria below. For example, where a product is sold with a subsequent service, revenue is allocated initially to the
product component and the service component, and it is recognised separately thereafter when the criteria for
revenue recognition are met for each component. IFRS 15 replaced IAS 18 and IAS 11 with effect from periods
beginning on or after 1 January 2018.
Revenue – IFRS 15
In May 2014, the IASB and FASB issued their converged standard on revenue recognition – IFRS 15 and ASC
606, Revenue from Contracts with Customers. The standard contains principles that an entity will apply to
determine the measurement of revenue and the timing of when it is recognised. The underlying principle is that an
entity will recognise revenue to depict the transfer of goods or services to customers at an amount that the entity
expects to be entitled to in exchange for those goods or services. The standard could significantly change how
many entities recognise revenue. The standard will also result in a significant increase in the volume of disclosures
related to revenue recognition.
Under IFRS 15, revenue is recognised based on the satisfaction of performance obligations. In applying IFRS 15,
entities would follow this five-step process:
1. Identify the contract with a customer.
2. Identify the separate performance obligations in the contract.
3. Determine the transaction price.
4. Allocate the transaction price to the separate performance obligations.
5. Recognise revenue when (or as) each performance obligation is satisfied.
1. Identify the contract with a customer
The model starts with identifying the contract with the customer, and whether an entity should combine, for
accounting purposes, two or more contracts, to properly reflect the economics of the underlying transaction. An
entity will need to conclude that it is ‘probable’, at the inception of the contract, that the entity will collect the
consideration to which it will ultimately be entitled in exchange for the goods or services that are transferred to the
customer in order for a contract to be within the scope of the revenue standard. The term ‘probable’ has a different
meaning under IFRS (where it means ‘more likely than not’ – that is, greater than 50% likelihood) and US GAAP
(where it is generally interpreted as 75–80% likelihood). This could result in a difference in the accounting for a
contract if there is a likelihood of non-payment at inception. However, the Boards decided that there would not be a
significant practical effect of the different meaning of the same term, because the population of transactions that
would fail to meet the criterion in paragraph 9(e) of IFRS 15 would be small.
Two or more contracts (including contracts with related parties of the customers) should be combined if: the
contracts are entered into at or near the same time and the contracts are negotiated with a single commercial
objective; the amount of consideration in one contract depends on the other contract; or the goods or services in
the contracts are interrelated. A contract modification is treated as a separate contract only if it results in the
addition of a separate performance obligation and the price reflects the stand-alone selling price (that is, the price
at which the good or service would be sold on a stand-alone basis) of the additional performance obligation. The
modification is otherwise accounted for as an adjustment to the original contract, either through a cumulative catchup
adjustment to revenue or a prospective adjustment to revenue when future performance obligations are
satisfied, depending on whether the remaining goods and services are distinct.
2. Identify the separate performance obligations in the contract
An entity will be required to identify all performance obligations in a contract. Performance obligations are promises
to transfer goods or services to a customer, and they are similar to what we know today as ‘elements’ or
‘deliverables’. Performance obligations might be explicitly stated in the contract, but they might also arise in other
ways. Legal or statutory requirements to deliver a good or perform a service might create performance obligations,
even though such obligations are not explicit in the contract. A performance obligation could also be created
through customary business practices, such as an entity’s practice of providing customer support, or by published
policies or specific company statements. This could result in an increased number of performance obligations
within an arrangement, possibly changing the timing of revenue recognition.
20  PwC | IFRS overview 2019
An entity accounts for each promised good or service as a separate performance obligation if the good or service is
distinct. Such a good or service is distinct if both of the following criteria are met:
1. The customer can benefit from the good or service, either on its own or together with other resources that are
readily available to the customer (that is, the good or service is capable of being distinct); and
2. The entity’s promise to transfer the good or service to the customer is separately identifiable from other
promises in the contract (that is, the promise to transfer the good or service is distinct within the context
of the contract).
Sales-type incentives (such as free products or customer loyalty programmes) are currently recognised as
marketing expense under US GAAP in some circumstances. These incentives might be performance
obligations under IFRS 15; if so, revenue will be deferred until such obligations are satisfied, such as when a
customer redeems loyalty points. Other potential changes in this area include accounting for return rights, licences
and options.
3. Determine the transaction price
Once an entity identifies the performance obligations in a contract, the obligations will be measured by reference to
the transaction price. The transaction price reflects the amount of consideration that an entity expects to be entitled
to in exchange for goods or services transferred. The amount of expected consideration captures: (1) variable
consideration if it is ‘highly probable’ (IFRS) or ‘probable’ (US GAAP) that the amount will not result in a significant
revenue reversal if estimates change; (2) an assessment of time value of money (as a practical expedient, an
entity need not make this assessment where the period between payment and the transfer of goods or services
is less than one year); (3) non-cash consideration, generally at fair value; and (4) less any consideration paid
to customers.
Variable consideration is measured using either a ‘probability weighted’ or ‘most likely amount’ approach,
whichever is most predictive of the final outcome. Inclusion of variable consideration in the initial measurement of
the transaction price might result in a significant change in the timing of revenue recognition. Such consideration is
recognised as the entity satisfies its related performance obligations, provided that (1) the entity has relevant
experience with similar performance obligations (or other valid evidence) that allows it to estimate the cumulative
amount of revenue for a satisfied performance obligation, and (2) based on that experience, the entity does not
expect a significant reversal in future periods in the cumulative amount of revenue recognised for that performance
obligation. Judgement will be needed to assess whether the entity has predictive experience about the outcome of
a contract. The following indicators might suggest that the entity’s experience is not predictive of the outcome of a
contract: (1) the amount of consideration is highly susceptible to factors outside the influence of the entity; (2) the
uncertainty about the amount of consideration is not expected to be resolved for a long period of time; (3) the
entity’s experience with similar types of contract is limited; and (4) the contract has a large number and broad range
of possible consideration amounts.
4. Allocate the transaction price to the separate performance obligations
For contracts with multiple performance obligations (deliverables), the performance obligations should be
separately accounted for, to the extent that the pattern of transfer of goods and services is different. Once an
entity identifies and determines whether to separately account for all of the performance obligations in a contract,
the transaction price is allocated to these separate performance obligations, based on relative stand-alone
selling prices.
The best evidence of stand-alone selling price is the observable price of a good or service where the entity sells
that good or service separately. The selling price is estimated if a stand-alone selling price is not available. Some
possible estimation methods include (1) cost plus a reasonable margin, and (2) evaluation of stand-alone sales
prices of the same or similar products, if available. If the stand-alone selling price is highly variable or uncertain,
entities could use a residual approach to aid in estimating the stand-alone selling price (that is, total transaction
price less the stand-alone selling prices of other goods or services in the contract). An entity could also allocate
discounts and variable amounts entirely to one (or more) performance obligations if certain conditions are met.
5. Recognise revenue when (or as) each performance obligation is satisfied
Revenue should be recognised when a promised good or service is transferred to the customer. This occurs when
the customer obtains control of that good or service. Control can transfer at a point in time or continuously over
time. Determining when control transfers will require significant judgement. An entity satisfies a performance
obligation over time if: (1) the customer is receiving and consuming the benefits of the entity’s performance as the
entity performs (that is, another entity would not need to substantially re-perform the work completed to date); (2)
the entity’s performance creates or enhances an asset that the customer controls as the asset is created or
enhanced; or (3) the entity’s performance does not create an asset with an alternative use to the entity, the entity
has a right to payment for performance completed to date that includes compensation for a reasonable profit
margin, and it expects to fulfil the contract. A good or service not satisfied over time is satisfied at a point in time.
Indicators to consider, in determining when the customer obtains control of a promised asset, include: (1) the
customer has an unconditional obligation to pay; (2) the customer has legal title; (3) the customer has physical
possession; (4) the customer has the risks and rewards of ownership of the good; and (5) the customer has
accepted the asset. These indicators are not a checklist, nor are they all-inclusive. All relevant factors should be
considered, to determine whether the customer has obtained control of a good.
21  PwC | IFRS overview 2019
If control is transferred continuously over time, an entity could use output methods (for example, units delivered) or
input methods (for example, costs incurred or passage of time) to measure the amount of revenue to be
recognised. The method that best depicts the transfer of goods or services to the customer should be applied
consistently throughout the contract and to similar contracts with customers.
Contract cost guidance
IFRS 15 also includes guidance related to contract costs. Costs relating to satisfied performance obligations and
costs related to inefficiencies should be expensed as incurred. Incremental costs of obtaining a contract (for
example, a sales commission) should be recognised as an asset if they are expected to be recovered. An entity
can expense the cost of obtaining a contract if the amortisation period would be less than one year. Entities should
evaluate whether direct costs incurred in fulfilling a contract are within the scope of other standards (for example,
inventory, intangibles, or property, plant and equipment). If so, the entity should account for such costs in
accordance with those standards. If not, the entity should capitalise those costs only if the costs relate directly to a
contract, relate to future performance, and are expected to be recovered under a contract. An example of such
costs might be certain mobilisation, design or testing costs. These costs would then be amortised as control of the
goods or services to which the asset relates is transferred to the customer. The amortisation period could extend
beyond the length of the contract, where the economic benefit will be received over a longer period. An example
might include set-up costs related to contracts likely to be renewed.
Licensing
IFRS 15 includes specific implementation guidance on accounting for licences of IP. The first step is to determine
whether the licence is distinct or combined with other goods or services. The revenue recognition pattern for
distinct licences is based on whether the licence is a right to access IP (revenue recognised over time) or a right to
use IP (revenue recognised at a point in time). For licences that are bundled with other goods or services,
management will apply judgement to assess the nature of the combined item and determine whether the combined
performance obligation is satisfied at a point in time or over time. In addition, the revenue standard includes an
exception to variable consideration guidance for the recognition of sales – or usage-based royalties promised in
exchange for a licence of IP.
Principal versus agent considerations
Where an arrangement involves two or more unrelated parties that contribute to providing a specified good or
service to a customer, management will need to determine whether the entity has promised to provide the specified
good or service itself (as a principal) or to arrange for those specified goods or services to be provided by another
party (as an agent). Determining whether an entity is the principal or an agent is not a policy choice. IFRS 15
includes indicators that an entity controls a specified good or service before it is transferred to the customer, to help
entities to apply the concept of control to the principal versus agent assessment. The assessment should be made
separately for each specified good or service. An entity could be the principal for some goods or services, and an
agent for others, in contracts with multiple distinct goods or services.
Summary observations and anticipated timing
The above commentary is not all-inclusive. The effect of IFRS 15 is extensive, and all industries could be affected.
Some will see pervasive changes, because the new model will replace all existing IFRS and US GAAP revenue
recognition guidance, including industry-specific guidance with limited exceptions (for example, certain guidance on
rate-regulated activities in US GAAP). Under IFRS, the final standard is effective for the first interim period within
annual reporting periods beginning on or after 1 January 2018.
Entities should continue to evaluate how the model might affect current business activities, including contract
negotiations, key metrics (including debt covenants and compensation arrangements), budgeting, controls and
processes, information technology requirements, and accounting. IFRS 15 will permit an entity to apply it either
retrospectively in accordance with IAS 8 or modified retrospectively (that is, including the cumulative effect at initial
application date in opening retained earnings – or other equity components, as appropriate). IFRS 15 also provides
certain practical expedients that an entity could elect to apply, to simplify transition.
22  PwC | IFRS overview 2019
Government grants – IAS 20
Government grants are assistance by government in the form of transfers of resources to an entity in return for past
or future compliance with certain conditions relating to the operating activities of the entity. Such government grants
may be given to an entity to help finance a particular asset or other expenditure.
Recognition
Government grants are recognised when there is reasonable assurance that the entity will comply with the
conditions related to them and that the grants will be received.
Grants related to income are recognised in profit or loss on a systematic basis over the periods necessary to match
them with the related costs that they are intended to compensate. They are either offset against the related
expense or presented as income, either separately or under a general heading such as ‘other income’. The timing
of such recognition in profit or loss will also depend on the fulfilment of any conditions or obligations attaching to
the grant.
Grants related to assets are either offset against the carrying amount of the relevant asset or presented as deferred
income in the balance sheet. Profit or loss will be affected either by a reduced depreciation charge or by deferred
income being recognised as income systematically over the useful life of the related asset.
23  PwC | IFRS overview 2019
Segment reporting – IFRS 8
Segment guidance requires an entity to disclose information that enables users of the financial statements to
evaluate the nature and financial effects of the business activities and the economic environments through the eyes
of management (‘management approach’).
Although many entities manage their business using some level of ‘segmented’ data, the disclosure requirements
are limited to (a) entities with listed or quoted equity or debt instruments, and (b) entities that are in the process of
obtaining a listing or quotation of equity or debt instruments in a public market. To the extent that an entity not
meeting either of these criteria chooses to disclose segmented data in financial statements, the information can
only be referred to as ‘segment information’ if it complies with the segment guidance described below.
The identification of an entity’s operating segments is the core determinant for the level of information included in
the segment disclosures. Operating segments are components of an entity, identified based on the breakout of
information contained in the internal reports that are regularly used by the entity’s chief operating decision-maker
(CODM) to allocate resources and to assess performance.
Reportable segments are individual operating segments or a group of operating segments for which segment
information must be separately reported (that is, disclosed). Aggregation of one or more operating segments into a
single reportable segment is permitted (but not required) where certain conditions are met, the principal condition
being that the operating segments should have similar economic characteristics (for example, profit margin,
spreads, sales growth rates, etc.). Whether multiple operating segments can be aggregated into a single reportable
segment is a matter of significant judgement.
For each segment disclosed, entities are required to provide a measure of profit or loss in the format viewed by the
CODM, as well as a measure of assets and liabilities if such amounts are regularly provided to the CODM. Other
segment disclosures include the revenue from customers for each group of similar products and services, revenue
by geography, and dependence on major customers. Additional detailed disclosures of performance and resources
are required if the CODM reviews these amounts. A reconciliation of the total amount disclosed for all segments
to the primary financial statements is required for revenue, profit and loss, and other material items reviewed by
the CODM.
24  PwC | IFRS overview 2019
Employee benefits – IAS 19
The accounting for employee benefits, and for pensions in particular, is complex. The liabilities in defined benefit
pension plans are frequently material. They are long-term and difficult to measure, and this gives rise to difficulty in
measuring the cost attributable to each year.
Employee benefits are all forms of consideration given or promised by an entity in exchange for services rendered
by its employees. These benefits include salary-related benefits (such as wages, profit-sharing bonuses, and
compensated absences, including paid holiday and long-service leave), termination benefits (such as severance
and redundancy pay) and post-employment benefits (such as retirement benefit plans). IAS 19 is relevant for all
employee benefits, except for those to which IFRS 2, ‘Share-based payments’, applies.
Recognition and measurement for short-term benefits is relatively straightforward, because actuarial assumptions
are not required and the obligations are not discounted. However, long-term benefits, particularly post-employment
benefits, give rise to more complicated measurement issues.
Post-employment benefits include pensions, post-employment life insurance and medical care. Pensions are
provided to employees either through defined contribution plans or defined benefit plans.
Defined contribution plans
Accounting for defined contribution plans is straightforward: the cost of defined contribution plans is the contribution
payable by the employer for that accounting period.
Defined benefit plans
Accounting for defined benefit plans is complex, because actuarial assumptions and valuation methods are
required to measure the balance sheet obligation and the expense. The expense recognised generally differs from
the contributions made in the period.
Subject to certain conditions, the net amount recognised on the balance sheet is the difference between the
defined benefit obligation and the plan assets.
To calculate the defined benefit obligation, estimates (actuarial assumptions) regarding demographic variables
(such as employee turnover and mortality) and financial variables (such as future increases in salaries and medical
costs) are made and included in a valuation model. The resulting benefit obligation is then discounted to a present
value. This normally requires the expertise of an actuary.
Where defined benefit plans are funded, the plan assets are measured at fair value. Where no market price is
available, the fair value of plan assets is estimated (for example, by discounting expected future cash flows using a
discount rate that reflects both the risk associated with the plan assets and the maturity of those assets). Plan
assets are tightly defined, and only assets that meet a strict definition can be offset against the plan’s defined
benefit obligations, resulting in a net surplus or net deficit that is shown on the balance sheet.
At each balance sheet date, the plan assets and the defined benefit obligation are remeasured. The income
statement reflects the change in the surplus or deficit, except for contributions to the plan and benefits paid by
the plan, along with business combinations and remeasurement gains and losses. Remeasurement gains and
losses comprise actuarial gains and losses, return on plan assets (excluding amounts included in net interest on
the net defined benefit liability or asset) and any change in the effect of the asset ceiling (excluding amounts
included in net interest on the net defined benefit liability or asset). Remeasurements are recognised in other
comprehensive income.
The amount of pension expense (income) to be recognised in profit or loss comprises the following individual
components, unless they are required or permitted to be included in the costs of an asset:
 Service costs (that is, the present value of the benefits earned by active employees); and
 Net interest costs (that is, the unwinding of the discount on the defined benefit obligation and a theoretical
return on plan assets).
Service costs comprises the ‘current service costs’, which is the increase in the present value of the defined benefit
obligation resulting from employee services in the current period, ‘past service costs’ (as defined below and
including any change in the present value of the defined benefit obligation resulting from a plan amendment or
curtailment) and any gain or loss on settlement.
Net interest on the net defined benefit liability (asset) is defined as ‘the change during the period in the net
defined benefit liability (asset) that arises from the passage of time’. The net interest cost can be viewed as
comprising theoretical interest income on plan assets, interest cost on the defined benefit obligation (that is,
representing the unwinding of the discount on the plan obligation) and interest on the effect of the asset ceiling.
25  PwC | IFRS overview 2019
An entity shall calculate net interest on the net defined benefit liability (asset) by multiplying the net defined benefit
liability (asset) by the discount rate. The entity shall use the net defined benefit liability (asset) and the discount rate
determined at the start of the annual reporting period (unless there is a plan amendment, curtailment or settlement
during the reporting period). It shall also take into account any changes in the net defined benefit liability (asset)
resulting from contributions to the plan or benefit payments. The discount rate applicable to any financial year is an
appropriate high quality corporate bond rate (or government bond rate if appropriate) in the currency in which the
liabilities are denominated
Past-service costs are defined as a change in the present value of the defined benefit obligation for employee
services in prior periods, resulting from a plan amendment (the introduction or withdrawal of, or changes to,
a defined benefit plan) or a curtailment (a significant reduction by the entity in the number of employees covered by
a plan). Past-service costs need to be recognised as an expense generally when a plan amendment or curtailment
occurs. Settlement gains or losses are recognised in the income statement when the settlement occurs.
A settlement is defined as ‘a transaction that eliminates all further legal or constructive obligations for part or all of
the benefits provided under a defined benefit plan’ (other than benefit payments). Settlement gains or losses are
recognised in the income statement when the settlement occurs.
IFRIC 14, ‘IAS 19 – The limit on a defined benefit asset, minimum funding requirements and their interaction’,
provides guidance on assessing the amount that can be recognised as an asset when plan assets exceed the
defined benefit obligation creating a net surplus. It also explains how the pension asset or liability might be affected
by a statutory or contractual minimum funding requirement.
26  PwC | IFRS overview 2019
Share-based payment – IFRS
2
IFRS 2 applies to all share-based payment transactions in which goods or services are received as part of a sharebased
payment arrangement. A share-based payment arrangement is defined as:
‘An agreement between the entity (or another group entity or any shareholder of any group entity) and another
party (including an employee) that entitles the other party to receive:
a. Cash or other assets of the entity for amounts that are based on the price (or value) of equity instruments
(including shares or share options) of the entity or another group entity, or
b. Equity instruments (including shares or share options) of the entity or another group entity.’
The most common application is to employee share schemes, such as share option schemes. However, entities
sometimes also pay for other expenses, such as professional fees and for the purchase of assets, by means of
share-based payment.
The accounting treatment under IFRS 2 is based on the fair value of the instruments. Both the valuation of and the
accounting for awards can be difficult, due to the complex models that need to be used to calculate the fair value of
options and also due to the variety and complexity of schemes. In addition, the standard requires extensive
disclosures. The result generally is to reduce reported profits, especially in entities that use share-based payment
extensively as part of their remuneration strategy.
Typically, share-based payment transactions are recognised as expenses or assets over any vesting period.
Equity-settled share-based payment transactions are measured at the grant date fair value for employee services;
and, for non-employee transactions, they are measured at the fair value of the goods or services received at the
date on which the entity recognises the goods or services. If the fair value of the goods or services cannot be
estimated reliably (such as employee services and circumstances in which the goods or services cannot be
specifically identified), the entity uses the fair value of the equity instruments granted. Additionally, management
needs to consider if there are any unidentifiable goods or services received or to be received by the entity, as these
also have to be recognised and measured in accordance with IFRS 2.
Equity-settled share-based payment transactions are not remeasured once the grant date fair value has
been determined.
The treatment is different for cash-settled share-based payment transactions: cash-settled awards are
measured at the fair value (as defined in IFRS 2, and not as defined in IFRS 13) of the liability. The liability is
remeasured at each balance sheet date and at the date of settlement, with changes in fair value recognised in
the income statement.
27  PwC | IFRS overview 2019
Taxation – IAS 12, IFRIC 23
IAS 12 deals with taxes on income, comprising current tax and deferred tax.
Current tax expense for a period is based on the taxable and deductible amounts that will be shown on the tax
return for the current year. An entity recognises a liability in the balance sheet in respect of current tax expense for
the current and prior periods to the extent that it is unpaid. It recognises an asset if current tax has been overpaid.
Current tax assets and liabilities for the current and prior periods are measured at the amount expected to be paid
to (recovered from) the taxation authorities, using the tax rates and tax laws that have been enacted or
substantively enacted by the balance sheet date.
Tax payable, based on taxable profit, seldom matches the tax expense that might be expected, based on pre-tax
accounting profit. Tax laws and financial accounting standards recognise and measure income, expenditure, assets
and liabilities in different ways.
Deferred tax accounting seeks to deal with this mismatch. It is based on the temporary differences between the tax
base of an asset or liability and its carrying amount in the financial statements. For example, where an asset is
revalued upwards but not sold, the revaluation creates a temporary difference (if the carrying amount of the asset in
the financial statements is greater than the tax base of the asset), and the tax consequence is a deferred tax
liability.
Deferred tax is provided in full for all temporary differences arising between the tax bases of assets and liabilities
and their carrying amounts in the financial statements, except where the temporary difference arises from:
 Initial recognition of goodwill (for deferred tax liabilities only);
 Initial recognition of an asset or liability in a transaction that is not a business combination and that affects
neither accounting profit nor taxable profit; and
 Investments in subsidiaries, branches, associates and joint ventures, but only where certain criteria apply.
Deferred tax assets and liabilities are measured at the tax rates that are expected to apply to the period when the
asset is realised or the liability is settled, based on tax rates (and tax laws) that have been enacted or substantively
enacted by the balance sheet date. The discounting of deferred tax assets and liabilities is not permitted.
Generally, the measurement of deferred tax liabilities and deferred tax assets reflects the tax consequences that
would follow from the manner in which the entity expects, at the balance sheet date, to recover or settle the
carrying amount of its assets and liabilities. The carrying amount of a non-depreciable asset (such as land) can
only be recovered through sale. For other assets, the manner in which management expects to recover the asset
(that is, through use or through sale, or through a combination of both) is considered at each balance sheet date.
An exception has been introduced for investment property measured using the fair value model in IAS 40, with a
rebuttable presumption that such investment property is recovered entirely through sale.
Management only recognises a deferred tax asset for deductible temporary differences to the extent that it is
probable that taxable profit will be available against which the deductible temporary difference can be utilised. This
also applies to deferred tax assets for unused tax losses carried forward.
Current and deferred tax is recognised in profit or loss for the period, unless the tax arises from a business
combination or a transaction or event that is recognised outside profit or loss, either in other comprehensive income
or directly in equity, in the same or different period. The tax consequences that accompany, for example, a change
in tax rates or tax laws, a reassessment of the recoverability of deferred tax assets or a change in the expected
manner of recovery of an asset are recognised in profit or loss, except to the extent that they relate to items
previously charged or credited outside profit or loss.
IFRIC 23, ‘Uncertainty over income tax treatments’
This IFRIC clarifies how the recognition and measurement requirements of IAS 12 ‘Income taxes’, are applied
where there is uncertainty over income tax treatments. Effective 1 January 2019.
28  PwC | IFRS overview 2019
Earnings per share – IAS 33
Earnings per share (EPS) is a ratio that is widely used by financial analysts, investors and others to gauge an
entity’s profitability and to value its shares. EPS is normally calculated in the context of ordinary shares of the
entity. Earnings attributable to ordinary shareholders are therefore determined by deducting from net income the
earnings attributable to holders of more senior equity instruments.
An entity whose ordinary shares are listed on a recognised stock exchange, or is otherwise publicly traded,
is required to disclose both basic and diluted EPS with equal prominence in its separate or individual
financial statements, or in its consolidated financial statements if it is a parent. Furthermore, entities that file, or are
in the process of filing, financial statements with a securities commission or other regulatory body for the purposes
of issuing ordinary shares (that is, not a private placement) are also required to comply with the standard.
Basic EPS is calculated by dividing the profit or loss for the period attributable to the equity holders of the parent by
the weighted average number of ordinary shares outstanding (including adjustments for bonus and rights issues).
Diluted EPS is calculated by adjusting the profit or loss and the weighted average number of ordinary shares by
taking into account the conversion of any dilutive potential ordinary shares. Potential ordinary shares are those
financial instruments and contracts that might result in issuing ordinary shares, such as convertible bonds and
options (including employee share options).
Basic and diluted EPS, for both continuing and total operations, are presented with equal prominence in the
statement of comprehensive income (or in the separate income statement, where one is presented) for each class
of ordinary shares. Separate EPS figures for discontinued operations are disclosed in the same statements or in
the notes.
29  PwC | IFRS overview 2019
Balance sheet and
related notes
30  PwC | IFRS overview 2019
Intangible assets – IAS 38
An intangible asset is an identifiable non-monetary asset without physical substance. The identifiable criterion is
met when the intangible asset is separable (that is, when it can be sold, transferred or licensed), or where it arises
from contractual or other legal rights.
Separately acquired intangible assets
Separately acquired intangible assets are recognised initially at cost. Cost comprises the purchase price, including
import duties and non-refundable purchase taxes and any directly attributable costs of preparing the asset for its
intended use. The purchase price of a separately acquired intangible asset incorporates assumptions about the
probable economic future benefits that might be generated by the asset.
Internally generated intangible assets
The process of generating an intangible asset is divided into a research phase and a development phase. No
intangible assets arising from the research phase can be recognised. Intangible assets arising from the
development phase are recognised when the entity can demonstrate:
 Its technical feasibility;
 Its intention to complete the developments;
 Its ability to use or sell the intangible asset;
 How the intangible asset will generate probable future economic benefits (for example, the existence of a
market for the output of the intangible asset or for the intangible asset itself);
 The availability of resources to complete the development; and
 Its ability to measure the attributable expenditure reliably.
Any expenditure written off during the research or development phase cannot subsequently be capitalised if the
project meets the criteria for recognition at a later date.
The costs relating to many internally generated intangible items cannot be capitalised, and they are expensed as
incurred. This includes research, start-up and advertising costs. Expenditure on internally generated brands,
mastheads, customer lists, publishing titles and goodwill are not recognised as intangible assets.
Intangible assets acquired in a business combination
If an intangible asset is acquired in a business combination, both the probability and measurement criterion are
always considered to be met. An intangible asset will therefore always be recognised, regardless of whether it has
been previously recognised in the acquiree’s financial statements.
Subsequent measurement
Intangible assets are amortised, unless they have an indefinite useful life. Amortisation is carried out on a
systematic basis over the useful life of the intangible asset. An intangible asset has an indefinite useful life when,
based on an analysis of all of the relevant factors, there is no foreseeable limit to the period over which the asset is
expected to generate net cash inflows for the entity.
Intangible assets with finite useful lives are considered for impairment when there is an indication that the asset has
been impaired. Intangible assets with indefinite useful lives, and intangible assets not yet in use, are tested
annually for impairment and whenever there is an indication of impairment.
31  PwC | IFRS overview 2019
Property, plant and
equipment – IAS 16
Property, plant and equipment (PPE) is recognised when the cost of an asset can be reliably measured and it is
probable that the entity will obtain future economic benefits from the asset.
PPE is measured initially at cost. Cost includes the fair value of the consideration given to acquire the asset (net of
discounts and rebates) and any directly attributable cost of bringing the asset to working condition for its intended
use (inclusive of import duties and non-refundable purchase taxes).
Directly attributable costs include the cost of site preparation, delivery, installation costs, relevant professional fees
and the estimated cost of dismantling and removing the asset and restoring the site (to the extent that such a cost
is recognised as a provision). Classes of PPE are carried either at historical cost less accumulated depreciation
and any accumulated impairment losses (the cost model), or at a revalued amount less any accumulated
depreciation and subsequent accumulated impairment losses (the revaluation model). The depreciable amount of
PPE (being the gross carrying value less the estimated residual value) is depreciated on a systematic basis over its
useful life.
Subsequent expenditure relating to an item of PPE is capitalised if it meets the recognition criteria.
PPE might comprise parts with different useful lives. Depreciation is calculated based on each individual part’s life.
In case of replacement of one part, the new part is capitalised to the extent that it meets the recognition criteria of
an asset, and the carrying amount of the part replaced is derecognised.
The cost of a major inspection or overhaul of an item, occurring at regular intervals over the useful life of the item,
is capitalised to the extent that it meets the recognition criteria of an asset. The carrying amounts of the parts
replaced are derecognised.
Borrowing costs
Under IAS 23, ‘Borrowing costs’, entities are required to capitalise borrowing costs directly attributable to the
acquisition, construction or production of a qualifying asset to be capitalised.
32  PwC | IFRS overview 2019
Investment property – IAS 40
Certain properties are classified as investment properties for financial reporting purposes in accordance with IAS
40, ‘Investment property’. The characteristics of these properties differ significantly from owner-occupied
properties. It is the current value of such properties and changes to those values that are relevant to users of
financial statements.
Investment property is property (land or a building, or part of a building, or both) held by an entity to earn rentals
and/or for capital appreciation (for example, property in the course of construction or development). Any other
properties are accounted for as property, plant and equipment (PPE) or inventory in accordance with:
 IAS 16, ‘Property, plant and equipment’, if they are held for use in the production or supply of goods or
services; or
 IAS 2, ‘Inventories’, as inventory, if they are held for sale in the ordinary course of business.
Investment property is initially measured at cost. Management could subsequently measure investment properties
at fair value or at cost. This is an accounting policy choice. The policy chosen is applied consistently to all of the
investment properties that the entity owns.
Investment properties in the course of construction or development are measured at fair value if this can be reliably
measured, where the fair value option is chosen. Otherwise, they are measured at cost.
Fair value is ‘the price that would be received to sell an asset or paid to transfer a liability in an orderly
transaction between market participants at the measurement date’. Guidance on fair value measurement is
given in IFRS 13. Changes in fair value are recognised in profit or loss in the period in which they arise.
The cost model requires investment properties to be carried at cost less accumulated depreciation and any
accumulated impairment losses; the fair value of these properties is disclosed in the notes.
33  PwC | IFRS overview 2019
Impairment of assets – IAS 36
Nearly all current and non-current financial assets are subject to an impairment test, to ensure that they are not
overstated on balance sheets.
The basic principle of impairment is that an asset cannot be carried on the balance sheet above its recoverable
amount. Recoverable amount is the higher of the asset’s fair value less costs of disposal and its value in use:
 Fair value less costs of disposal is ‘the price that would be received to sell an asset in an orderly transaction
between market participants at the measurement date’ less costs of disposal. Guidance on fair value is given in
IFRS 13.
 Value in use requires management to estimate the present value of the future cash flows that are expected to
be derived from the asset in its current condition.
The carrying value of an asset is compared to the recoverable amount. An asset or CGU is impaired when its
carrying amount exceeds its recoverable amount. Any impairment is allocated to the asset or assets of the CGU,
with the impairment loss recognised in profit or loss.
All assets subject to the impairment guidance are tested for impairment when there is an indication that the asset
might be impaired. Assets that are not amortised (such as goodwill, indefinite-lived intangible assets and
intangible assets that are not yet available for use) are also tested for impairment annually, even if there is no
impairment indicator.
Both external indicators (for example, significant adverse changes in the technological, market, economic or legal
environment, or increases in market interest rates) and internal indicators (for example, evidence of obsolescence
or physical damage of an asset, or evidence from internal reporting that the economic performance of an asset is,
or will be, worse than expected) are considered, when considering whether an asset is impaired.
An asset seldom generates cash flows independently of other assets. Most assets are tested for impairment in
groups of assets described as cash-generating units (CGUs). A CGU is the smallest identifiable group of assets
that generates inflows that are largely independent from the cash flows from other CGUs.
Impairment should be identified at the individual asset level, where possible. The recoverable amount should be
calculated for the CGU to which the asset belongs only where the recoverable amount for the individual asset
cannot be identified. An impairment review of a CGU should cover all of its tangible assets, intangible assets and
attributable goodwill. The carrying value of each CGU containing the assets and goodwill being reviewed should be
compared with the higher of its value in use and fair value less costs of disposal.
Goodwill acquired in a business combination is allocated to the acquirer’s CGUs or groups of CGUs that are
expected to benefit from the synergies of the business combination. However, the largest group of CGUs permitted
for goodwill impairment testing is an operating segment before aggregation.
34  PwC | IFRS overview 2019
Lease accounting –
IAS 17, IFRS 16
IFRS 16, ‘Leases’, was published in January 2016 and is mandatory from 1 January 2019. It will replace the current
guidance in IAS 17.
IAS 17
A lease gives one party (the lessee) the right to use an asset over an agreed period of time in return for payment to
the lessor. Leasing is an important source of medium – and long-term financing; accounting for leases can have a
significant impact on lessees’ and lessors’ financial statements.
Leases are classified as finance or operating leases at inception, depending on whether substantially all of the risks
and rewards of ownership transfer to the lessee. Under a finance lease, the lessee has substantially all of the risks
and rewards of ownership. All other leases are operating leases. Leases of land and buildings are considered
separately under IFRS.
Under a finance lease, the lessee recognises an asset held under a finance lease and a corresponding obligation
to pay rentals. The lessee depreciates the asset.
The lessor recognises the leased asset as a receivable. The receivable is measured at the ‘net investment’ in the
lease – that is, the minimum lease payments receivable, discounted at the internal rate of return of the lease, plus
the unguaranteed residual that accrues to the lessor.
Under an operating lease, the lessee does not recognise an asset and lease obligation. The lessor continues to
recognise the leased asset and depreciates it. The rentals paid are normally charged to the income statement of
the lessee and credited to that of the lessor on a straight-line basis.
Linked transactions with the legal form of a lease are accounted for on the basis of their substance – for example, a
sale and leaseback where the seller is committed to repurchase the asset might not be a lease, in substance, if the
‘seller’ retains the risks and rewards of ownership and substantially the same rights of use as before the
transaction.
Equally, some transactions that do not have the legal form of a lease are, in substance, leases if they are
dependent on a particular asset that the purchaser can control physically or economically.
IFRS 16
IFRS 16 defines a lease as a contract, or part of a contract, that conveys the right to use an asset (the underlying
asset) for a period of time in exchange for consideration.
Under IFRS 16, lessees have to recognise a lease liability reflecting future lease payments and a ‘right-of-use
asset’ for almost all lease contracts. This is a significant change compared to IAS 17, under which lessees were
required to make a distinction between a finance lease (on balance sheet) and an operating lease (off balance
sheet). IFRS 16 gives lessees optional exemptions for certain short-term leases and leases of low-value assets. In
the income statement, lessees will have to present interest expense on the lease liability and depreciation on the
right-of-use asset. In the cash flow statement, the part of the lease payments that reflects interest on the lease
liability can be presented as an operating cash flow (if it is the entity’s policy to present interest payments as
operating cash flows). Cash payments for the principal portion of the lease liability are classified within financing
activities. Payments for short-term leases, for leases of low-value assets and variable lease payments not included
in the measurement of the lease liability are presented within operating activities.
As under IAS 17, the lessor has to classify leases as either finance or operating, depending on whether
substantially all of the risks and rewards incidental to ownership of the underlying asset have been transferred. For
a finance lease, the lessor recognises a receivable; and, for an operating lease, the lessor continues to recognise
the underlying asset.
IFRS 16 adds significant new, enhanced disclosure requirements for both lessors and lessees.
IFRS 16 is effective for annual reporting periods beginning on or after 1 January 2019. Earlier application is
permitted, but only in conjunction with IFRS 15, ‘Revenue from contracts with customers’. On transition, lessees
can choose between full retrospective application and a ‘simplified approach’ that includes certain reliefs and does
not require a restatement of comparatives. In addition, as a practical expedient, entities are not required to
reassess whether a contract is, or contains, a lease at the date of initial application (that is, such contracts are
‘grandfathered’).
35  PwC | IFRS overview 2019
Inventories – IAS 2
Inventories are initially recognised at the lower of cost and net realisable value (NRV). Cost of inventories includes
import duties, non-refundable taxes, transport and handling costs, and any other directly attributable costs less
trade discounts, rebates and similar items. NRV is the estimated selling price in the ordinary course of business,
less the estimated costs of completion and estimated selling expenses.
IAS 2, ‘Inventories’, requires the cost for items that are not interchangeable or that have been segregated for
specific contracts to be determined on an individual-item basis. The cost of other items of inventory used is
assigned by using either the first-in, first-out (FIFO) or weighted average cost formula. Last-in, first-out (LIFO) is not
permitted. An entity uses the same cost formula for all inventories that have a similar nature and use to the entity. A
different cost formula could be justified where inventories have a different nature or use. The cost formula used is
applied on a consistent basis from period to period.
36  PwC | IFRS overview 2019
Provisions and contingencies
– IAS 37
A liability is a ‘present obligation of the entity arising from past events, the settlement of which is expected
to result in an outflow from the entity of resources embodying economic benefits’. A provision is ‘a liability
of uncertain timing or amount’.
Recognition and initial measurement
A provision is recognised when: the entity has a present obligation as a result of past events; it is probable (that is,
more likely than not) that a transfer of economic benefits will be required to settle the obligation; and a reliable
estimate of the amount of the obligation can be made.
The amount recognised as a provision is the best estimate of the expenditure required to settle the present
obligation at the balance sheet date, measured at the present value of the expected cash outflows where the effect
of the time value of money is material. Provisions are not recognised for future operating losses.
A present obligation arises from an obligating event, and it could take the form of either a legal obligation or a
constructive obligation. An obligating event leaves the entity no realistic alternative to settling the obligation. If the
entity can avoid the future expenditure by its future actions, it has no present obligation, and no provision is
required. For example, an entity cannot recognise a provision based solely on the intent to incur expenditure at
some future date or the expectation of future operating losses.
An obligation does not have to be a ‘legal’ obligation before a provision is recognised. An entity might have an
established pattern of past practice, published policies or a sufficient specific current statement that indicates
to other parties that it will accept certain responsibilities and, as a result, it has created a valid expectation on the
part of those other parties that it will discharge those responsibilities (that is, the entity has a
constructive obligation).
If an entity has an onerous contract (that is, the unavoidable costs of meeting the obligations under the contract
exceed the economic benefits expected to be received under it), the present obligation under the contract is
recognised as a provision. Impairments of any assets dedicated to the contract are recognised before making
a provision.
Restructuring provisions
A restructuring provision is recognised only when the general recognition criteria for a provision are met.
The obligation for a restructuring is often constructive. A constructive restructuring obligation arises only when there
is: (a) a detailed formal plan identifying the main features of the restructuring; and (b) a valid expectation in those
affected that the entity will carry out the restructuring by starting to implement the plan or announcing its main
features to those affected.
A restructuring plan does not create a present obligation at the balance sheet date if it is announced after that date,
even if it is announced before the financial statements are approved. A sale or termination of a business might fall
under the definition of a restructuring. No obligation arises in respect of restructuring costs associated with the sale
of an operation until the entity is committed to the sale (that is, there is a binding sale agreement).
A restructuring provision includes only the direct expenditures arising from the restructuring, which are necessarily
entailed by the restructuring, and not those associated with the entity’s ongoing activities. Any expected gains on
the sale of assets are not considered in measuring a restructuring provision.
Reimbursements
Where some or all of the expenditure required to settle a provision is expected to be reimbursed by another party,
the reimbursement should be recognised only when it is virtually certain that reimbursement will be received if the
entity settles the obligation. The entity typically remains liable for the entire obligation, and reimbursements are
therefore presented separately as assets. The amount recognised should not exceed the amount of the related
provision. Expenses relating to a provision can be presented net of the amount recognised for a reimbursement in
the income statement.
Subsequent measurement
Provisions should be re-assessed at the end of each reporting period and adjusted to reflect current best estimates.
This re-assessment should include the estimated cash flows and the discount rate. The unwinding of the discount
due to the passage of time should be included as an element of borrowing costs in arriving at profit or loss for the
year.
37  PwC | IFRS overview 2019
Contingent liabilities
Contingent liabilities are possible obligations that arise from past events and whose existence will be confirmed
only on the occurrence or non-occurrence of uncertain future events outside the entity’s control, or present
obligations that arise from past events but are not recognised because: (a) it is not probable that an outflow of
economic benefits will be required to settle the obligation; or (b) the amount cannot be measured reliably.
Contingent liabilities are not recognised, but are disclosed, unless the possibility of an outflow is remote.
Contingent assets
Contingent assets are possible assets that arise from past events and whose existence will be confirmed only on
the occurrence or non-occurrence of uncertain future events outside the entity’s control. Contingent assets are not
recognised.
Contingent assets are disclosed if the inflow of economic benefits is probable.
Levies
A public authority could impose a levy on entities, based on measures such as gross revenues for a specified
period or on assets or liabilities at a specified date. IFRIC 21 addresses the accounting for such levies. The
obligating event that gives rise to a liability to pay a levy is the activity that triggers the payment of the levy, as
identified by the legislation.
38  PwC | IFRS overview 2019
Events after the reporting
period and financial
commitments – IAS 10
It is not practicable for preparers to finalise financial statements without a period of time elapsing between the
balance sheet date and the date on which the financial statements are authorised for issue. The question therefore
arises as to the extent to which events occurring between the balance sheet date and the date of approval (that is,
'events after the reporting period' or ‘post balance sheet events’) should be reflected in the financial statements.
Events after the reporting period are either adjusting events or non-adjusting events. Adjusting events provide
additional evidence of conditions that already existed at the balance sheet date – for example, the determination,
after the year end, of the consideration for assets sold before the year end; or the settlement of a court case after
the balance sheet date that confirms that the entity had a present obligation at the balance sheet date. Nonadjusting
events indicate conditions that arose after the balance sheet date – for example, announcing a plan to
discontinue an operation after the year end or changes in tax rates or tax laws enacted or announced after the
balance sheet date.
The carrying amounts of assets and liabilities at the balance sheet date are adjusted only for adjusting events or
events that indicate that the going-concern basis of preparation in relation to the whole entity is not appropriate.
Significant non-adjusting events, such as the issue of shares, major business combinations, destruction of a major
production plant by fire, or abnormally large changes after the reporting period in asset prices or foreign exchange
rates, are disclosed.
Financial commitments
If an entity enters into any significant commitment or contingent liability after period end, it must be disclosed as a
non-adjusting event. Other standards require disclosure of commitments that exist at the balance sheet date that
will affect future periods, such as capital commitments and operating lease commitments.
Dividends
Dividends proposed or declared after the balance sheet date but before the financial statements have been
authorised for issue are not recognised as a liability at the balance sheet date. However, the details of these
dividends are disclosed in the notes in accordance with IAS 1.
Date of authorisation of the financial statements for issue
An entity discloses the date on which the financial statements were authorised for issue and who gives that
authorisation. Where applicable, if the entity’s owners or other parties have the power to amend the financial
statements after issue, it should be disclosed.
39  PwC | IFRS overview 2019
Share capital and reserves
Equity, along with assets and liabilities, is one of the three elements used to portray an entity’s financial position.
Equity is defined in the IASB’s Framework as the residual interest in the entity’s assets after deducting all of its
liabilities. The term ‘equity’ is often used to encompass an entity’s equity instruments and reserves. Equity is given
various descriptions in the financial statements. Corporate entities might refer to it as owners’ equity, shareholders’
equity, capital and reserves, shareholders’ funds and proprietorship. Equity includes various components with
different characteristics.
Determining what constitutes an equity instrument for the purpose of IFRS, and how it should be accounted for,
falls within the scope of IAS 32, ‘Financial instruments: presentation’.
Equity instruments (for example, issued, non-redeemable ordinary shares) are generally recorded as the residual
after recording the recognition or derecognition of assets or liabilities arising on the equity issue (the proceeds of
issue) and after deducting directly attributable transaction costs. Equity instruments are not remeasured after
initial recognition.
Reserves include retained earnings, together with reserves such as fair value reserves, hedging reserves, asset
revaluation reserves and foreign currency translation reserves and other statutory reserves.
Treasury shares
Treasury shares are deducted from equity. No gain or loss is recognised in profit or loss on the purchase, sale,
issue or cancellation of an entity’s own equity instruments.
Non-controlling interests
Non-controlling interests (previously termed ‘minority interests’) in consolidated financial statements are presented
as a component of equity, separately from the parent shareholders’ equity.
Disclosures
IAS 1, ‘Presentation of financial statements’, requires various disclosures. These include the total issued share
capital and reserves, presentation of a statement of changes in equity, capital management policies and
dividend information.
40  PwC | IFRS overview 2019
Consolidated and
separate financial
statements
41  PwC | IFRS overview 2019
Consolidated financial
statements – IFRS 10
The principles concerning consolidated financial statements under IFRS are set out in IFRS 10, ‘Consolidated
financial statements’. IFRS 10 has a single definition of control.
IFRS 10’s objective is to establish principles for presenting and preparing consolidated financial statements when
an entity controls one or more entities. IFRS 10 sets out the requirements for when an entity should prepare
consolidated financial statements, defines the principles of control, explains how to apply the principles of control,
and explains the accounting requirements for preparing consolidated financial statements.
The key principle is that control exists, and consolidation is required, only if the investor possesses power over the
investee, has exposure to variable returns from its involvement with the investee, and has the ability to use its
power over the investee to affect its returns.
IFRS 10 provides guidance on the following issues when determining who has control:
 Assessment of the purpose and design of an investee.
 Relevant activities and power to direct those.
 Nature of rights – Whether substantive or merely protective in nature.
 Assessment of voting rights and potential voting rights.
 Whether an investor is a principal or an agent when exercising its controlling power.
 Relationships between investors and how they affect control.
 Existence of power over specified assets only.
In difficult situations, the precise facts and circumstances will affect the analysis under IFRS 10. IFRS 10 does not
provide ‘bright lines’, and it requires consideration of many factors, such as the existence of contractual
arrangements and rights held by other parties, in order to assess control.
IFRS 10 does not contain any disclosure requirements; these are included within IFRS 12. Reporting entities
should plan for, and implement, the processes and controls that will be required to gather the required information.
This might involve a preliminary consideration of IFRS 12 issues, such as the level of disaggregation required.
42  PwC | IFRS overview 2019
Separate financial statements
– IAS 27
IAS 27 deals with the accounting for investments in subsidiaries, joint ventures and associates when an entity
elects, or is required by local regulations, to present separate financial statements. Each category of investments
should be accounted for either at cost, in accordance with IAS 39 and IFRS 9, or using the equity method in the
separate financial statements.
43  PwC | IFRS overview 2019
Business combinations –
IFRS 3
A business combination is a transaction or event in which an entity (‘acquirer’) obtains control of one or more
businesses (‘acquirees’). Under IFRS 10, an investor controls an investee when the investor is exposed, or has
rights, to variable returns from its involvement with the investee and has the ability to affect those returns through
its power over the investee. A number of factors might influence which entity has control, including: equity
shareholding, control of the board and control agreements. There is a presumption of control if an entity owns more
than 50% of the equity shareholding in another entity.
Business combinations occur in a variety of structures. IFRS 3, ‘Business combinations’, focuses on the substance
of the transaction, rather than the legal form. The overall result of a series of transactions is considered if there are
a number of transactions among the parties involved. For example, any transaction contingent on the completion of
another transaction might be considered to be linked. Judgement is required to determine when transactions
should be linked.
All business combinations within IFRS 3’s scope are accounted for using the acquisition method. The acquisition
method views a business combination from the perspective of the acquirer, and it can be summarised in the
following steps:
 Identify the acquirer.
 Determine the acquisition date.
 Recognise and measure the identifiable assets acquired, liabilities assumed and any non-controlling interest in
the acquiree.
 Recognise and measure the consideration transferred for the acquiree.
 Recognise and measure goodwill or a gain from a bargain purchase.
The acquiree’s identifiable assets (including intangible assets not previously recognised), liabilities and contingent
liabilities are generally recognised at their fair value. Fair value is measured in accordance with IFRS 13. If the
acquisition is for less than 100% of the acquiree, there is a non-controlling interest. The non-controlling interest
represents the equity in a subsidiary that is not attributable, directly or indirectly, to the parent. The acquirer can
elect to measure the non-controlling interest at its fair value, or at its proportionate share of the identifiable net
assets, on an acquisition-by-acquisition basis.
The consideration for the combination includes cash and cash equivalents, the fair value of any non-cash
consideration given and liabilities assumed. Any equity instruments issued as part of the consideration are fair
valued at the acquisition date. If any of the consideration is deferred, it is discounted to reflect its present value at
the acquisition date, if the effect of discounting is material. Consideration includes only those amounts paid to the
seller in exchange for control of the entity. Consideration excludes amounts paid to settle pre-existing relationships,
payments that are contingent on future employee services and acquisition-related costs.
A portion of the consideration might be contingent on the outcome of future events or the acquired entity’s
performance (‘contingent consideration’). Contingent consideration is also recognised at its fair value at the date of
acquisition. The accounting for contingent consideration after the date of acquisition depends on whether it is
classified as a liability (remeasured to fair value each reporting period through profit and loss) or as equity (no
subsequent remeasurement). The classification as either a liability or equity is determined with reference to the
guidance in IAS 32.
Goodwill is recognised for the future economic benefits arising from assets acquired that are not individually
identified and separately recognised. Goodwill is the difference between the considerations transferred, the amount
of any non-controlling interest in the acquiree, and the acquisition-date fair value of any previous equity interest in
the acquiree over the fair value of the identifiable net assets acquired. If the non-controlling interest is measured at
its fair value, goodwill includes amounts attributable to the non-controlling interest. If the non-controlling interest is
measured at its proportionate share of identifiable net assets, goodwill includes only amounts attributable to the
controlling interest (that is, the parent).
Goodwill is recognised as an asset and tested annually for impairment, or more frequently if there is an indication
of impairment.
In rare situations (for example, a bargain purchase as a result of a distressed sale), it is possible that no goodwill
will result from the transaction. Rather, a gain will be recognised.
Business combinations excluded from IFRS 3’s scope (for example, those involving businesses under common
control) have a policy choice of using either the acquisition accounting method outlined in IFRS 3 or predecessor
accounting.
44  PwC | IFRS overview 2019
Disposal of subsidiaries,
businesses and non-current
assets – IFRS 5
IFRS 5, ‘Non-current assets held for sale and discontinued operations’, is relevant when any disposal occurs or is
planned, including distribution of non-current assets to shareholders. The held-for-sale criteria in IFRS 5 apply to
non-current assets (or disposal groups) whose value will be recovered principally through sale rather than through
continuing use. The criteria do not apply to non-assets that are being scrapped, wound down or abandoned.
IFRS 5 defines a disposal group as a group of assets to be disposed of, by sale or otherwise, together as a
group in a single transaction, and liabilities directly associated with those assets that will be transferred in
the transaction.
The non-current asset (or disposal group) is classified as ‘held for sale’ if it is available for immediate sale in its
present condition and its sale is highly probable. A sale is ‘highly probable’ where: there is evidence of
management commitment; there is an active programme to locate a buyer and complete the plan; the asset is
actively marketed for sale at a reasonable price compared to its fair value; the sale is expected to be completed
within 12 months of the date of classification; and actions required to complete the plan indicate that it is unlikely
that there will be significant changes to the plan or that it will be withdrawn.
A non-current asset (or disposal group) is classified as ‘held for distribution to owners’ where the entity is
committed to such distribution (that is, the assets must be available for immediate distribution in their present
condition and the distribution must be highly probable). For a distribution to be highly probable, actions to complete
the distribution should have been initiated and should be expected to be completed within one year from the date of
classification. Actions required to complete the distribution should indicate that it is unlikely that significant changes
to the distribution will be made or that the distribution will be withdrawn. The probability of shareholders’ approval (if
required in the jurisdiction) should be considered in the assessment of ‘highly probable’.
Non-current assets (or disposal groups) classified as held for sale or as held for distribution are:
 Measured at the lower of the carrying amount and fair value less costs to sell;
 Not depreciated or amortised; and
 Presented separately in the balance sheet (assets and liabilities should not be offset).
A discontinued operation is a component of an entity that can be distinguished operationally and financially for
financial reporting purposes from the rest of the entity, and it:
 Represents a separate major line of business or geographical area of operation;
 Is part of a single co-ordinated plan to dispose of a separate major line of business or major geographical area
of operation; or
 Is a subsidiary acquired exclusively with a view to resale?
An operation is classified as discontinued only at the date on which it meets the criteria to be classified as held for
sale or when the entity has disposed of it. Although balance sheet information is neither restated nor remeasured
for discontinued operations, the statement of comprehensive income information does have to be restated for the
comparative period.
Discontinued operations are presented separately in the income statement and the cash flow statement. There are
additional disclosure requirements in relation to discontinued operations.
The date of disposal of a subsidiary or disposal group is the date on which control passes. The consolidated
income statement includes the results of a subsidiary or disposal group up to the date of disposal; the gain or loss
on disposal is the difference between (a) the carrying amount of the net assets plus any attributable goodwill and
amounts accumulated in other comprehensive income (for example, foreign translation adjustments and availablefor-sale
reserves), and (b) the proceeds of sale.
45  PwC | IFRS overview 2019
Equity accounting – IAS 28
IAS 28, ‘Investments in associates and joint ventures’, requires that interests in such entities are accounted for
using the equity method of accounting. An associate is an entity in which the investor has significant influence, but
which is neither a subsidiary nor a joint venture of the investor. Significant influence is the power to participate in
the financial and operating policy decisions of the investee, but not to control those policies. It is presumed to exist
where the investor holds at least 20% of the investee’s voting power. It is presumed not to exist where less than
20% is held. These presumptions can be rebutted.
The equity method of accounting also applies to interests in joint ventures. A joint venture is a joint arrangement
where the parties that have joint control have rights to the arrangement’s net assets. Under the equity method, the
investment in the associate or joint venture is initially carried at cost. It is increased or decreased to recognise the
investor’s share of the profit or loss of the associate or joint venture after the date of acquisition. Associates and
joint ventures are accounted for using the equity method, unless they meet the criteria to be classified as ‘held for
sale’ under IFRS 5.
Investments in associates or joint ventures are classified as non-current assets and presented as one line item in
the balance sheet (inclusive of notional goodwill arising on acquisition). Investments in associates or joint ventures
are tested for impairment in accordance with IAS 36, ‘Impairment of assets’, as single assets if there are
impairment indicators under IAS 28 (as amended by IFRS 9).
An entity applies IFRS 9 to financial instruments in an associate or joint venture to which the equity method is not
applied. These include long-term interests that, in substance, form part of the entity’s net investment in an
associate or joint venture. If an investor’s share of its associate’s or joint venture’s losses exceeds the carrying
amount of the investment (which, for this purpose, includes other long-term interests that, in substance, form part of
the entity’s investment in the associate or the joint venture), the carrying amount of the investment is reduced to nil.
Recognition of further losses are discontinued, unless the investor has an obligation to fund the associate or joint
venture, or the investor has guaranteed to support the associate or joint venture.
In the separate (non-consolidated) financial statements of the investor, the investments in associates or joint
ventures are carried at cost, in accordance with IAS 39 and IFRS 9 or using the equity method.
46  PwC | IFRS overview 2019
Joint arrangements – IFRS 11
A joint arrangement is a contractual arrangement where at least two parties agree to share control over the
activities of the arrangement. Unanimous consent towards decisions about relevant activities between the parties
sharing control is a requirement in order to meet the definition of joint control.
Joint arrangements can be joint operations or joint ventures. The classification is principle-based, and it depends
on the parties’ rights and obligations in relation to the arrangement.
Where the parties’ exposure to the arrangement only extends to the net assets of the arrangement, the
arrangement is a joint venture.
Joint operators have rights to assets and obligations for liabilities. Joint operations are often not structured through
separate vehicles.
Where a joint arrangement is included in a separate vehicle, it can be either a joint operation or a joint venture. In
such cases, further analysis is required on the legal form of the separate vehicle, the terms and conditions included
in the contractual agreement and, sometimes, other facts and circumstances. This is because, in practice, the latter
two can override the principles derived from the legal form of the separate vehicle.
Joint operators account for their rights to assets and obligations for liabilities. Joint ventures account for their
interest by using the equity method of accounting (see ‘29. Equity accounting – IAS 28’ above).
47  PwC | IFRS overview 2019
Other subjects
48  PwC | IFRS overview 2019
Related-party disclosures –
IAS 24
Under IAS 24, disclosures are required in respect of an entity’s transactions with related parties. Related
parties include:
 Parents;
 Subsidiaries;
 Fellow subsidiaries;
 Associates of the entity and other members of the group;
 Joint ventures of the entity and other members of the group;
 Members of key management personnel of the entity or of a parent of the entity (and close members of
their families);
 Persons with control, joint control or significant influence over the entity (and close members of their families);
 Post-employment benefit plans; and
 Entities (or any of their group members) providing key management personnel services to the entity or
its parent.
Finance providers are not related parties simply because of their normal dealings with the entity.
Management discloses the name of the entity’s parent and, if different, the ultimate controlling party (which could
be a person). Relationships between a parent and its subsidiaries are disclosed, irrespective of whether there have
been transactions with them.
Where there have been related party transactions during the period, management discloses the nature of the
relationship, as well as information about the transactions and outstanding balances, including commitments,
necessary for users to understand the potential impact of the relationship on the financial statements. Disclosure is
made by category of related party and by major type of transaction. Items of a similar nature can be disclosed in
aggregate, except where separate disclosure is necessary for an understanding of the effects of related party
transactions on the entity’s financial statements.
Management only discloses that related party transactions were made on terms equivalent to those that prevail in
arm’s length transactions, if such terms can be substantiated.
An entity is exempt from the disclosure of transactions (and outstanding balances) with a related party that is either
a government that has control, joint control or significant influence over the entity or is another entity that is under
the control, joint control or significant influence of the same government as the entity. Where the entity applies the
exemption, it discloses the name of the government and the nature of its relationship with the entity. It also
discloses the nature and amount of each individually significant transaction and the qualitative or quantitative
extent of any collectively significant transactions.
49  PwC | IFRS overview 2019
Cash flow statements – IAS 7
The statement of cash flows is one of the primary statements in financial reporting (along with the statement of
comprehensive income, the balance sheet and the statement of changes in equity). It presents the generation and
use of ‘cash and cash equivalents’ by category (operating, investing and financing) over a specific period of time. It
provides users with a basis to assess the entity’s ability to generate and utilise its cash.
Operating activities are the entity’s revenue-producing activities. Investing activities are the acquisition and disposal
of long-term assets (including business combinations) and investments that are not cash equivalents. Financing
activities are changes in equity and borrowings.
Management can present operating cash flows by using either the direct method (gross cash receipts/payments) or
the indirect method (adjusting net profit or loss for non-operating and non-cash transactions, and for changes in
working capital).
Cash flows from investing and financing activities are reported separately gross (that is, gross cash receipts and
gross cash payments), unless they meet certain specified criteria.
The cash flows arising from dividends and interest receipts and payments are classified on a consistent basis, and
they are separately disclosed under the activity appropriate to their nature. Cash flows relating to taxation on
income are classified and separately disclosed under operating activities, unless they can be specifically attributed
to investing or financing activities.
The total that summarises the effect of the operating, investing and financing cash flows is the movement in the
balance of cash and cash equivalents for the period.
Separate disclosure is made of significant non-cash transactions (such as the issue of equity for the acquisition of a
subsidiary or the acquisition of an asset through a finance lease). Non-cash transactions include impairment
losses/reversals, depreciation, amortisation, fair value gains/losses, and income statement charges for provisions.
Additional disclosures are required to explain changes in liabilities arising from financing activities, distinguishing
cash flows from non-cash changes.
50  PwC | IFRS overview 2019
Interim financial reporting –
IAS 34
There is no IFRS requirement for an entity to publish interim financial statements. However, a number of countries
either require or recommend their publication, in particular for public companies.
Entities can prepare either full IFRS financial statements (conforming to the requirements of IAS 1) or condensed
financial statements. Condensed reporting is the most common approach. Condensed financial statements include:
(i) a condensed statement of financial position (balance sheet), (ii) a condensed statement of comprehensive
income or, if presented separately, an income statement and other comprehensive income statement, (iii) a
condensed statement of cash flows, (iv) a condensed statement of changes in equity, and (v) selected
explanatory notes.
An entity should apply accounting policies consistently, for recognising and measuring assets, liabilities, revenues,
expenses and gains and losses at interim dates, as compared to those to be used in the current-year annual
financial statements.
There are special measurement requirements for certain costs that can only be determined on an annual basis
(for example, items such as tax that shall be calculated based on an estimated full-year effective tax rate). It is
also acknowledged that the preparation of interim reports generally requires a greater use of estimates than for
annual financial reports. An impairment loss recognised in a previous interim period in respect of goodwill should
not be reversed.
As a minimum, current-period and comparative figures (for condensed or full primary statements) are disclosed
as follows:
 Statement of financial position (balance sheet): as of the end of the current interim period, with comparatives
for the immediately preceding year end.
 Statement of comprehensive income (or, if presented separately, income statement and statement of other
comprehensive income): for the current interim period and the current year-to-date information, with
comparatives for the equivalent periods in the previous year.
 Cash flow statement and statement of changes in equity: for the current interim period on a year-to-date basis,
with comparatives for the equivalent period in the previous year.
IAS 34 sets out criteria to determine what information should be disclosed in the interim financial statements. These
include: [please add bullet list]
 Materiality to the overall interim financial statements;
 Unusual or non-recurring items;
 Changes since previous reporting periods that have a significant effect on the interim financial statements (of
the current or previous reporting financial year); and
 Relevant information for understanding the estimates used in the interim financial statements.
The overriding objective is to include an explanation of events and transactions that are significant to understand
the changes in the entity’s financial position and performance since the end of the last annual reporting period.
51  PwC | IFRS overview 2019
Service concession
arrangements – SIC 29 and
IFRIC 12
There is no specific IFRS that applies to public-to-private service concession arrangements for delivery of public
services. IFRIC 12, ‘Service concession arrangements’, interprets various standards in setting out the accounting
requirements for service concession arrangements, while SIC 29, ‘Services concession arrangements: disclosures’,
contains disclosure requirements.
IFRIC 12 applies to public-to-private service concession arrangements in which the public sector body (the grantor)
controls and/or regulates the services provided with the infrastructure by the private sector entity (the operator).
The concession arrangement also addresses to whom the operator should provide the services and at what price.
The grantor controls any significant residual interest in the infrastructure.
As the infrastructure is controlled by the grantor, the operator does not recognise the infrastructure as its property,
plant and equipment; nor does the operator recognise a finance lease receivable for leasing the public service
infrastructure to the grantor, regardless of the extent to which the operator bears the risk and rewards incidental to
ownership of the assets.
The operator recognises a financial asset to the extent that it has an unconditional contractual right to receive cash
irrespective of the usage of the infrastructure. The subsequent accounting of the financial asset should consider the
guidance in IFRS 9 ‘Financial Instruments’
The operator recognises an intangible asset to the extent that it receives a right (a licence) to charge users of the
public service.
The operator accounts for revenue and costs relating to construction or upgrade services and operation services in
accordance with IFRS 15.
52  PwC | IFRS overview 2019
Industry-specific topics
53  PwC | IFRS overview 2019
Agriculture – IAS 41
Agricultural activity is defined as the management of biological transformation and harvest of biological assets
(living animals and plants) for sale or for conversion into agricultural produce (harvested product of biological
assets) or into additional biological assets.
Biological assets that meet the definition of ‘bearer plants’ are measured either at cost or revalued amounts, less
accumulated depreciation and impairment losses under IAS 16.
All other biological assets, including produce growing on a bearer plant, are usually measured at fair value less
costs to sell, with the change in the carrying amount reported as part of profit or loss from operating activities.
Agricultural produce harvested from an entity’s biological assets is measured at fair value less costs to sell at the
point of harvest.
The fair value is measured in terms of IFRS 13.
IFRS 13 looks to the principal market for the asset and not entity-specific measures. The fair value measurement
should represent the price in the principal market (whether that price is directly observable or estimated using
another valuation technique), even if the price in a different market is potentially more advantageous at the
measurement date. In the absence of a principal market, the entity should use the price in the most advantageous
market for the relevant asset.
54  PwC | IFRS overview 2019
Extractive industries – IFRS 6
and IFRIC 20
IFRS 6, ‘Exploration for and evaluation of mineral resources’, addresses the financial reporting for the exploration
for and evaluation of mineral resources. It does not address other aspects of accounting by entities engaged in the
exploration for and evaluation of mineral reserves (such as activities before an entity has acquired the legal right to
explore, or after the technical feasibility and commercial viability to extract resources have been demonstrated).
Activities outside the scope of IFRS 6 are accounted for according to the applicable standards (such as IAS 16,
‘Property, plant and equipment’, IAS 37, ‘Provisions, contingent liabilities and contingent assets’, and IAS 38,
‘Intangible assets’).
The accounting policy adopted for the recognition of exploration and evaluation assets should result in information
that is relevant and reliable. As a concession, certain further rules of IAS 8 need not be applied. This permits
companies in the extractive sector to continue, for the time being, to apply policies that were followed under
national GAAP that would not comply with the requirements of IFRS. The accounting policy can be changed only if
the change makes the financial statements more relevant and no less reliable, or more reliable and no less relevant
– in other words, if the new accounting policy takes it closer to the requirements in the IASB’s Framework.
Exploration and evaluation assets are initially measured at cost. They are classified as tangible or intangible
assets, according to the nature of the assets acquired. Management applies that classification consistently. After
recognition, management applies either the cost model or the revaluation model to the exploration and evaluation
assets, based on IAS 16 or IAS 38, according to the nature of the assets. As soon as technical feasibility and
commercial viability are determined, the assets are no longer classified as exploration and evaluation assets.
The exploration and evaluation assets are tested for impairment when facts and circumstances suggest that
the carrying amounts might not be recovered. The assets are also tested for impairment before reclassification out
of exploration and evaluation. The impairment is measured, presented and disclosed according to IAS 36, except
that exploration and evaluation assets are allocated to CGUs or groups of CGUs, either of which must be no larger
than a segment. Management discloses the accounting policy adopted, as well as the amount of assets, liabilities,
income and expense and investing cash flows arising from the exploration and evaluation of mineral resources.
IFRIC 20, ‘Stripping costs in the production phase of a surface mine’, applies to waste removal costs incurred in
surface mining activity during the production phase.
55  PwC | IFRS overview 2019
Index by standard and
interpretation
56  PwC | IFRS overview 2019
Standards
IFRS 1 First-time adoption of International Financial Reporting Standards 4
IFRS 2 Share-based payment 28
IFRS 3 Business combinations 46
IFRS 4 Insurance contracts (superseded by IFRS 17) 18
IFRS 5 Non-current assets held for sale and discontinued operations 48
IFRS 6 Exploration for and evaluation of mineral resources 59
IFRS 7 Financial instruments: Disclosures 16
IFRS 8 Operating segments 25
IFRS 9 Financial instruments 12
IFRS 10 Consolidated financial statements 44
IFRS 11 Joint arrangements 51
IFRS 12 Disclosure of interests in other entities 44
IFRS 13 Fair value measurement 11
IFRS 14 Regulatory deferred accounts n/a*
IFRS 15 Revenue from contracts with customers 20
IFRS 16 Leases 36
IFRS 17 Insurance contracts 19
IAS 1 Presentation of financial statements 6
IAS 2 Inventories 38
IAS 7 Cash flow statements 54
IAS 8 Accounting policies, changes in accounting estimates and errors 9
IAS 10 Events after the balance sheet date 41
IAS 12 Income taxes 29
IAS 16 Property, plant and equipment 33
IAS 17 Leases (superseded by IFRS 16) 36
IAS 19 Employee benefits 26
IAS 20 Accounting for government grants and disclosure of
government assistance
24
IAS 21 The effects of changes in foreign exchange rates 17
IAS 23 Borrowing costs 33
IAS 24 Related-party disclosures 53
IAS 26 Accounting and reporting by retirement benefit plans n/a*
IAS 27 Separate financial statements 45
IAS 28 Investment in associates 50
57  PwC | IFRS overview 2019
Standards
IAS 29 Financial reporting in hyperinflationary economies 17
IAS 31 Interests in joint ventures 51
IAS 32 Financial instruments: presentation 13
IAS 33 Earnings per share 30
IAS 34 Interim financial reporting 55
IAS 36 Impairment of assets 35
IAS 37 Provisions, contingent liabilities and contingent assets 39
IAS 38 Intangible assets 32
IAS 39 Financial instruments: Recognition and measurement (superseded
by IFRS 9)
14
IAS 40 Investment property 34
IAS 41 Agriculture 58
Interpretations
IFRIC 12 Service concession arrangements 55
IFRIC 14 IAS 19 − The limit on a defined benefit asset, minimum funding
requirements and their interaction
27
IFRIC 15 Agreements for the construction of real estate 23
IFRIC 19 Extinguishing financial liabilities with equity instruments n/a*
IFRIC 20 Stripping costs in the production phase of a surface mine 59
IFRIC 21 Levies 40
IFRIC 22 Foreign currency transactions and advance consideration 17
IFRIC 23 Uncertainty over income tax treatments 28
58  PwC | IFRS overview 2019
This publication has been prepared for general guidance on matters of interest only, and does not
constitute professional advice. You should not act upon the information contained in this publication
without obtaining specific professional advice. No representation or warranty (express or implied) is given
as to the accuracy or completeness of the information contained in this publication, and, to the extent
permitted by law, PricewaterhouseCoopers LLP, its members, employees and agents do not accept or
assume any liability, responsibility or duty of care for any consequences of you or anyone else acting, or
refraining to act, in reliance on the information contained in this publication or for any decision based on it.
© 2019 PricewaterhouseCoopers LLP. All rights reserved. PwC refers to the UK member firm, and may
sometimes refer to the PwC network. Each member firm is a separate legal entity. Please see
www.pwc.com/structure for further details.
190208-120327-NR-OS