PPt_4face_021208.jpg © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Presentation_ID ‹#› Cisco_NewLogo Cisco Chapter 11: Network Address Translation for IPv4 Routing & Switching Cisco Networking Academy program Routing & Switching Chapter 11: Network Address Translation for IPv4 Presentation_ID ‹#› © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Rev08_Cisco_BrandBar10_060408.png Chapter 11 §11.1 NAT Operation §11.2 Configuring NAT §11.3 Troubleshooting NAT §11.4 Summary Chapter 11 Presentation_ID ‹#› © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Rev08_Cisco_BrandBar10_060408.png Chapter 11: Objectives §Describe NAT characteristics. §Describe the benefits and drawbacks of NAT. §Configure static NAT using the CLI. §Configure dynamic NAT using the CLI. §Configure PAT using the CLI. §Configure port forwarding using the CLI. §Configure NAT64. §Use show commands to verify NAT operation. Chapter 11 Objectives PPt_4face_021208.jpg © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Presentation_ID ‹#› Cisco_NewLogo Cisco 11.1 NAT Operation 11.1 NAT Operation Presentation_ID ‹#› © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Rev08_Cisco_BrandBar10_060408.png NAT Characteristics IPv4 Private Address Space §IPv4 address space is not big enough to uniquely address all the devices that must be connected to the Internet. §Network private addresses are described in RFC 1918 and are to designed to be used within an organization or site only. §Private addresses are not routed by Internet routers while public addresses are. §Private addresses can alleviate IPv4 scarcity, but because they aren’t routed by Internet devices, they first need to be translated. §NAT is process used to perform such translation. 11.1.1.1 IPv4 Private Address Space Presentation_ID ‹#› © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Rev08_Cisco_BrandBar10_060408.png NAT Characteristics IPv4 Private Address Space 11.1.1.1 IPv4 Private Address Space Presentation_ID ‹#› © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Rev08_Cisco_BrandBar10_060408.png NAT Characteristics What is NAT? §NAT is a process used to translate network addresses. §NAT’s primary use is to conserve public IPv4 addresses. §NAT is usually implemented at border network devices, such as firewalls or routers. §NAT allows the networks to use private addresses internally, only translating to public addresses when needed. §Devices within the organization can be assigned private addresses and operate with locally unique addresses. §When traffic must be sent or received to or from other organizations or the Internet, the border router translates the addresses to a public and globally unique address. 11.1.1.2 What is NAT? Presentation_ID ‹#› © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Rev08_Cisco_BrandBar10_060408.png NAT Characteristics What is NAT? (cont.) 11.1.1.2 What is NAT? (cont.) Presentation_ID ‹#› © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Rev08_Cisco_BrandBar10_060408.png NAT Characteristics NAT Terminology §Inside network is the set of devices using private addresses §Outside network refers to all other networks §NAT includes four types of addresses: •Inside local address •Inside global address •Outside local address •Outside global address § 11.1.1.3 NAT Terminology Presentation_ID ‹#› © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Rev08_Cisco_BrandBar10_060408.png NAT Characteristics NAT Terminology (cont.) 11.1.1.4 NAT Terminology (cont.) Presentation_ID ‹#› © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Rev08_Cisco_BrandBar10_060408.png Types of NAT Static NAT §Static NAT uses a one-to-one mapping of local and global addresses. §These mappings are configured by the network administrator and remain constant. §Static NAT is particularly useful when servers hosted in the inside network must be accessible from the outside network. §A network administrator can SSH to a server in the inside network by pointing the SSH client to the proper inside global address. 11.1.2.1 Static NAT Presentation_ID ‹#› © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Rev08_Cisco_BrandBar10_060408.png Types of NAT Static NAT (cont.) 11.1.2.1 Static NAT (cont.) Presentation_ID ‹#› © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Rev08_Cisco_BrandBar10_060408.png Types of NAT Dynamic NAT §Dynamic NAT uses a pool of public addresses and assigns them on a first-come, first-served basis. §When an inside device requests access to an outside network, dynamic NAT assigns an available public IPv4 address from the pool. §Dynamic NAT requires that enough public addresses are available to satisfy the total number of simultaneous user sessions. 11.1.2.2 Dynamic NAT Presentation_ID ‹#› © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Rev08_Cisco_BrandBar10_060408.png Types of NAT Dynamic NAT (cont.) 11.1.2.2 Dynamic NAT (cont.) Presentation_ID ‹#› © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Rev08_Cisco_BrandBar10_060408.png Types of NAT Port Address Translation §Port Address Translation (PAT) maps multiple private IPv4 addresses to a single public IPv4 address or a few addresses. §PAT uses the pair source port and source IP address to keep track of what traffic belongs to what internal client. §PAT is also known as NAT overload. §By also using the port number, PAT forwards the response packets to the correct internal device. §The PAT process also validates that the incoming packets were requested, thus adding a degree of security to the session. 11.1.2.3 Port Address Translation NAT Presentation_ID ‹#› © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Rev08_Cisco_BrandBar10_060408.png Types of NAT Comparing NAT and PAT §NAT translates IPv4 addresses on a 1:1 basis between private IPv4 addresses and public IPv4 addresses. §PAT modifies both the address and the port number. §NAT forwards incoming packets to their inside destination by referring to the incoming source IPv4 address provided by the host on the public network. §With PAT, there is generally only one or a very few publicly exposed IPv4 addresses. §PAT is able to translate protocols that do not use port numbers, such as ICMP; each one of these protocols is supported differently by PAT. 11.1.2.5 Comparing NAT and PAT Presentation_ID ‹#› © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Rev08_Cisco_BrandBar10_060408.png Benefits of NAT Benefits of NAT §Conserves the legally registered addressing scheme §Increases the flexibility of connections to the public network §Provides consistency for internal network addressing schemes §Provides network security 11.1.3.1 Benefits of NAT Presentation_ID ‹#› © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Rev08_Cisco_BrandBar10_060408.png Benefits of NAT Disadvantages of NAT §Performance is degraded §End-to-end functionality is degraded §End-to-end IP traceability is lost §Tunneling is more complicated §Initiating TCP connections can be disrupted 11.1.3.2 Disadvantages of NAT PPt_4face_021208.jpg © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Presentation_ID ‹#› Cisco_NewLogo Cisco 11.2 Configuring NAT 11.2 Configuring NAT Presentation_ID ‹#› © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Rev08_Cisco_BrandBar10_060408.png Configuring Static NAT Configuring Static NAT §There are two basic tasks to perform when configuring static NAT translations: §Create the mapping between the inside local and outside local addresses. §Define which interfaces belong to the inside network and which belong to the outside network. § 11.2.1.1 Configuring Static NAT Presentation_ID ‹#› © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Rev08_Cisco_BrandBar10_060408.png Configuring Static NAT Configuring Static NAT 11.2.1.1 Configuring Static NAT Presentation_ID ‹#› © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Rev08_Cisco_BrandBar10_060408.png Configuring Static NAT Analyzing Static NAT 11.2.1.2 Analyzing Static NAT Presentation_ID ‹#› © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Rev08_Cisco_BrandBar10_060408.png Configuring Static NAT Verifying Static NAT 11.2.1.2 Verifying Static NAT Presentation_ID ‹#› © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Rev08_Cisco_BrandBar10_060408.png Configuring Static NAT Verifying Static NAT (cont.) 11.2.1.2 Verifying Static NAT Presentation_ID ‹#› © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Rev08_Cisco_BrandBar10_060408.png Configuring Dynamic NAT Dynamic NAT Operation §The pool of public IPv4 addresses (inside global address pool) is available to any device on the inside network on a first-come, first-served basis. §With dynamic NAT, a single inside address is translated to a single outside address. §The pool must be large enough to accommodate all inside devices. §A device is unable to communicate to any external networks if no addresses are available in the pool. 11.2.2.1 Dynamic NAT Operation Presentation_ID ‹#› © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Rev08_Cisco_BrandBar10_060408.png Configuring Dynamic NAT Configuring Dynamic NAT 11.2.2.2 Configuring Dynamic NAT Presentation_ID ‹#› © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Rev08_Cisco_BrandBar10_060408.png Configuring Dynamic NAT Analyzing Dynamic NAT 11.2.2.3 Analyzing Dynamic NAT Presentation_ID ‹#› © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Rev08_Cisco_BrandBar10_060408.png Configuring Dynamic NAT Analyzing Dynamic NAT 11.2.2.3 Analyzing Dynamic NAT Presentation_ID ‹#› © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Rev08_Cisco_BrandBar10_060408.png Configuring Dynamic NAT Verifying Dynamic NAT 11.2.2.4 Verifying Dynamic NAT Presentation_ID ‹#› © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Rev08_Cisco_BrandBar10_060408.png Configuring Dynamic NAT Verifying Dynamic NAT 11.2.2.4 Verifying Dynamic NAT Presentation_ID ‹#› © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Rev08_Cisco_BrandBar10_060408.png Configuring PAT Configuring PAT: Address Pool 11.2.3.1 Configuring PAT: Address Pool Presentation_ID ‹#› © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Rev08_Cisco_BrandBar10_060408.png Configuring PAT Configuring PAT: Single Address 11.2.3.2 Configuring PAT: Single Address Presentation_ID ‹#› © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Rev08_Cisco_BrandBar10_060408.png Configuring PAT Analyzing PAT 11.2.3.3 Analyzing PAT Presentation_ID ‹#› © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Rev08_Cisco_BrandBar10_060408.png Configuring PAT Analyzing PAT 11.2.3.3 Analyzing PAT Presentation_ID ‹#› © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Rev08_Cisco_BrandBar10_060408.png Configuring PAT Verifying PAT Translations 11.2.3.4 Verifying PAT Presentation_ID ‹#› © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Rev08_Cisco_BrandBar10_060408.png Port Forwarding Port Forwarding §Port forwarding is the act of forwarding a network port from one network node to another. §A packet sent to the public IP address and port of a router can be forwarded to a private IP address and port in inside network. §Port forwarding is helpful in situations where servers have private addresses, not reachable from the outside networks. § 11.2.4.1 Port Forwarding Presentation_ID ‹#› © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Rev08_Cisco_BrandBar10_060408.png Port Forwarding SOHO Example 11.2.4.2 SOHO Example Presentation_ID ‹#› © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Rev08_Cisco_BrandBar10_060408.png Port Forwarding Configuring Port Forwarding with IOS §In IOS, Port forwarding is essentially a static NAT translation with a specified TCP or UDP port number. § 11.2.4.3 Configuring Port Forwarding with IOS Presentation_ID ‹#› © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Rev08_Cisco_BrandBar10_060408.png Configuring NAT and IPv6 NAT for IPv6? §NAT is a workaround for IPv4 address scarcity. §IPv6 with a 128-bit address provides 340 undecillion addresses. §Address space is not an issue for IPv6. §IPv6 makes IPv4 public-private NAT unnecessary by design; however, IPv6 does implement a form of private addresses, and it is implemented differently than they are for IPv4. § 11.2.5.1 NAT for IPv6? Presentation_ID ‹#› © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Rev08_Cisco_BrandBar10_060408.png Configuring NAT and IPv6 IPv6 Unique Local Addresses §IPv6 unique local addresses (ULAs) are designed to allow IPv6 communications within a local site. §ULAs are not meant to provide additional IPv6 address space. §ULAs have the prefix FC00::/7, which results in a first hextet range of FC00 to FDFF. §ULAs are also known as local IPv6 addresses (not to be confused with IPv6 link-local addresses). 11.2.5.2 IPv6 Unique Local Addresses Presentation_ID ‹#› © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Rev08_Cisco_BrandBar10_060408.png Configuring NAT and IPv6 NAT for IPv6 §IPv6 also uses NAT, but in a much different context. §In IPv6, NAT is used to provide transparent communication between IPv6 and IPv4. §NAT64 is not intended to be a permanent solution; it is meant to be a transition mechanism. §Network Address Translation-Protocol Translation (NAT-PT) was another NAT-based transition mechanism for IPv6, but is now deprecated by IETF. §NAT64 is now recommended. § § 11.2.5.3 NAT for IPv6 Presentation_ID ‹#› © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Rev08_Cisco_BrandBar10_060408.png Configuring NAT and IPv6 NAT for IPv6 11.2.5.3 NAT for IPv6 PPt_4face_021208.jpg © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Presentation_ID ‹#› Cisco_NewLogo Cisco 11.3 Troubleshooting NAT 11.3 Troubleshooting NAT Presentation_ID ‹#› © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Rev08_Cisco_BrandBar10_060408.png Configuring NAT and IPv6 Troubleshooting NAT: show commands 11.3.1.1 Troubleshooting NAT: show commands Presentation_ID ‹#› © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Rev08_Cisco_BrandBar10_060408.png Configuring NAT and IPv6 Troubleshooting NAT: debug command 11.3.1.2 Troubleshooting NAT: debug command Presentation_ID ‹#› © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Rev08_Cisco_BrandBar10_060408.png Chapter 11: Summary §This chapter has outlined: §How NAT is used to help alleviate the depletion of the IPv4 address space. §NAT conserves public address space and saves considerable administrative overhead in managing adds, moves, and changes. §NAT for IPv4, including: •NAT characteristics, terminology, and general operations •Different types of NAT, including static NAT, dynamic NAT, and NAT with overloading •Benefits and disadvantages of NAT §The configuration, verification, and analysis of static NAT, dynamic NAT, and NAT with overloading. • Chapter 11 Summary Presentation_ID ‹#› © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Rev08_Cisco_BrandBar10_060408.png Chapter 11: Summary (cont.) §How port forwarding can be used to access an internal devices from the Internet. §Troubleshooting NAT using show and debug commands. §How NAT for IPv6 is used to translate between IPv6 addresses and IPv4 addresses. Chapter 11 Summary Presentation_ID ‹#› © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential Rev08_Cisco_BrandBar10_060408.png CNA_largo-onwhite