NuSMV 2.6 User Manual
Roberto Cavada, Alessandro Cimatti,
Charles Arthur Jochim, Gavin Keighren,
Emanuele Olivetti, Marco Pistore, Marco Roveri
and Andrei Tchaltsev
FBK-irst - Via Sommarive 18, 38055 Povo (Trento) – Italy
Email: nusmv@fbk.eu
This document is part of the distribution package of the NUSMV model checker,
available at http://nusmv.fbk.eu.
Parts of this documents have been taken from “The SMV System - Draft”, by K.
McMillan, available at sdfdsf: http://www.cs.cmu.edu/˜modelcheck/
smv/smvmanual.r2.2.ps.
Copyright c 1998-2005 by CMU and ITC-irst.
Copyright c 2010 by FBK-irst.
Contents
1 Introduction 4
2 Input Language 6
2.1 Types Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.1.1 Boolean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.1.2 Integer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.1.3 Enumeration Types . . . . . . . . . . . . . . . . . . . . . . . 7
2.1.4 Word . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.1.5 Array . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.1.6 Set Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.1.7 Type Order . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.2 Expressions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.2.1 Implicit Type Conversion . . . . . . . . . . . . . . . . . . . . 10
2.2.2 Constant Expressions . . . . . . . . . . . . . . . . . . . . . . 10
2.2.3 Basic Expressions . . . . . . . . . . . . . . . . . . . . . . . 12
2.2.4 Simple and Next Expressions . . . . . . . . . . . . . . . . . 21
2.2.5 Type conversion operators . . . . . . . . . . . . . . . . . . . 21
2.3 Definition of the FSM . . . . . . . . . . . . . . . . . . . . . . . . . . 23
2.3.1 Variable Declarations . . . . . . . . . . . . . . . . . . . . . . 23
2.3.2 DEFINE Declarations . . . . . . . . . . . . . . . . . . . . . 27
2.3.3 Array Define Declarations . . . . . . . . . . . . . . . . . . . 27
2.3.4 CONSTANTS Declarations . . . . . . . . . . . . . . . . . . . 27
2.3.5 INIT Constraint . . . . . . . . . . . . . . . . . . . . . . . . 28
2.3.6 INVAR Constraint . . . . . . . . . . . . . . . . . . . . . . . 28
2.3.7 TRANS Constraint . . . . . . . . . . . . . . . . . . . . . . . 28
2.3.8 ASSIGN Constraint . . . . . . . . . . . . . . . . . . . . . . 28
2.3.9 FAIRNESS Constraints . . . . . . . . . . . . . . . . . . . . 30
2.3.10 MODULE Declarations . . . . . . . . . . . . . . . . . . . . . 31
2.3.11 MODULE Instantiations . . . . . . . . . . . . . . . . . . . . . 31
2.3.12 References to Module Components (Variables and Defines) . 32
2.3.13 Processes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
2.3.14 A Program and the main Module . . . . . . . . . . . . . . . 34
2.3.15 Namespaces and Constraints on Declarations . . . . . . . . . 34
2.3.16 Context . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
2.3.17 ISA Declarations . . . . . . . . . . . . . . . . . . . . . . . . 36
2.4 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
2.4.1 CTL Specifications . . . . . . . . . . . . . . . . . . . . . . . 36
2.4.2 Invariant Specifications . . . . . . . . . . . . . . . . . . . . . 38
2
2.4.3 LTL Specifications . . . . . . . . . . . . . . . . . . . . . . . 38
2.4.4 Real Time CTL Specifications and Computations . . . . . . . 40
2.4.5 PSL Specifications . . . . . . . . . . . . . . . . . . . . . . . 41
2.5 Variable Order Input . . . . . . . . . . . . . . . . . . . . . . . . . . 45
2.5.1 Input File Syntax . . . . . . . . . . . . . . . . . . . . . . . . 45
2.5.2 Scalar Variables . . . . . . . . . . . . . . . . . . . . . . . . . 46
2.5.3 Array Variables . . . . . . . . . . . . . . . . . . . . . . . . . 47
2.6 Clusters Ordering . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
3 Running NuSMV interactively 48
3.1 Model Reading and Building . . . . . . . . . . . . . . . . . . . . . . 49
3.2 Commands for Checking Specifications . . . . . . . . . . . . . . . . 58
3.3 Commands for Bounded Model Checking . . . . . . . . . . . . . . . 69
3.4 Commands for checking PSL specifications . . . . . . . . . . . . . . 85
3.5 Simulation Commands . . . . . . . . . . . . . . . . . . . . . . . . . 90
3.6 Execution Commands . . . . . . . . . . . . . . . . . . . . . . . . . . 93
3.7 Traces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
3.7.1 Inspecting Traces . . . . . . . . . . . . . . . . . . . . . . . . 95
3.7.2 Displaying Traces . . . . . . . . . . . . . . . . . . . . . . . 95
3.7.3 Trace Plugin Commands . . . . . . . . . . . . . . . . . . . . 96
3.8 Trace Plugins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
3.8.1 Basic Trace Explainer . . . . . . . . . . . . . . . . . . . . . 98
3.8.2 States/Variables Table . . . . . . . . . . . . . . . . . . . . . 99
3.8.3 XML Format Printer . . . . . . . . . . . . . . . . . . . . . . 99
3.8.4 XML Format Reader . . . . . . . . . . . . . . . . . . . . . . 100
3.8.5 Empty Trace . . . . . . . . . . . . . . . . . . . . . . . . . . 100
3.9 Interface to the DD Package . . . . . . . . . . . . . . . . . . . . . . 100
3.10 Administration Commands . . . . . . . . . . . . . . . . . . . . . . . 105
3.11 Other Environment Variables . . . . . . . . . . . . . . . . . . . . . . 111
4 Running NuSMV batch 114
Bibliography 119
A Compatibility with CMU SMV 121
B Typing Rules 124
B.1 Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
B.2 Implicit Conversion . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
B.3 Type Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
C Production Rules 129
3
Chapter 1
Introduction
NUSMV is a symbolic model checker originated from the reengineering, reimplementation
and extension of CMU SMV, the original BDD-based model checker developed
at CMU [McM93]. The NUSMV project aims at the development of a state-of-the-art
symbolic model checker, designed to be applicable in technology transfer projects: it
is a well structured, open, flexible and documented platform for model checking, and
is robust and close to industrial systems standards [CCGR00].
Version 1 of NUSMV basically implements BDD-based symbolic model checking.
Version 2 of NUSMV (NUSMV2 in the following) inherits all the functionalities
of the previous version, and extends them in several directions [CCG+
02]. The main
novelty in NUSMV2 is the integration of model checking techniques based on propositional
satisfiability (SAT) [BCCZ99]. SAT-based model checking is currently enjoying
a substantial success in several industrial fields, and opens up new research directions.
BDD-based and SAT-based model checking are often able to solve different classes of
problems, and can therefore be seen as complementary techniques.
Starting from NUSMV2, we are also adopting a new development and license
model. NUSMV2 is distributed with an OpenSource license1
, that allows anyone
interested to freely use the tool and to participate in its development. The aim of
the NUSMV OpenSource project is to provide to the model checking community a
common platform for the research, the implementation, and the comparison of new
symbolic model checking techniques. Since the release of NUSMV2, the NUSMV
team has received code contributions for different parts of the system. Several research
institutes and commercial companies have expressed interest in collaborating to the
development of NUSMV. The main features of NUSMV are the following:
• Functionalities. NUSMV allows for the representation of synchronous and
asynchronous finite state systems2
, and for the analysis of specifications expressed
in Computation Tree Logic (CTL) and Linear Temporal Logic (LTL),
using BDD-based and SAT-based model checking techniques. Heuristics are
available for achieving efficiency and partially controlling the state explosion.
The interaction with the user can be carried on with a textual interface, as well
as in batch mode.
1(see http://www.opensource.org)
2However, asynchronous processes are deprecated in version 2.5.0 and later, and may be no longer supported
in future versions.
4
• Architecture. A software architecture has been defined. The different components
and functionalities of NUSMV have been isolated and separated in modules.
Interfaces between modules have been provided. This reduces the effort
needed to modify and extend NUSMV.
• Quality of the implementation. NUSMV is written in ANSI C, is POSIX compliant,
and has been debugged with Purify in order to detect memory leaks. Furthermore,
the system code is thoroughly commented. NUSMV uses the state
of the art BDD package developed at Colorado University, and provides a general
interface for linking with state-of the-art SAT solvers. This makes NUSMV
very robust, portable, efficient, and easy to understand by people other than the
developers.
This document is structured as follows.
• In Chapter 2 [Input Language], page 6 we define the syntax of the input language
of NUSMV.
• In Chapter 3 [Running NuSMV interactively], page 48 the commands of the
interaction shell are described.
• In Chapter 4 [Running NuSMV batch], page 114 we define the batch mode of
NUSMV.
NUSMV is available at http://nusmv.fbk.eu.
5
Chapter 2
Input Language
In this chapter we present the syntax and semantics of the input language of NUSMV.
Before going into the details of the language, let us give a few general notes about
the syntax. In the syntax notations used below, syntactic categories (non-terminals)
are indicated by monospace font, and tokens and character set members (terminals)
by bold font. Grammar productions enclosed in square brackets (‘[]’) are optional
while a vertical bar (‘|’) is used to separate alternatives in the syntax rules. Sometimes
one of is used at the beginning of a rule as a shorthand for choosing among several
alternatives. If the characters |, [ and ] are in bold font, they lose their special meaning
and become regular tokens.
In the following, an identifier may be any sequence of characters starting with
a character in the set {A-Za-z } and followed by a possibly empty sequence of characters
belonging to the set {A-Za-z0-9 $#-}. All characters and case in an identifier
are significant. Whitespace characters are space (<SPACE>), tab (<TAB>) and newline
(<RET>). Any string starting with two dashes (‘--’) and ending with a newline
is a comment and ignored by the parser. The multiline comment starts with ‘/--’ and
ends with ‘--/’.
The syntax rule for an identifier is:
identifier ::
identifier_first_character
| identifier identifier_consecutive_character
identifier_first_character :: one of
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
a b c d e f g h i j k l m n o p q r s t u v w x y z _
identifier_consecutive_character ::
identifier_first_character
| digit
| one of $ # digit
:: one of 0 1 2 3 4 5 6 7 8 9
An identifier is always distinct from the NUSMV language reserved keywords
which are:
6
MODULE, DEFINE, MDEFINE, CONSTANTS, VAR, IVAR, FROZENVAR,
INIT, TRANS, INVAR, SPEC, CTLSPEC, LTLSPEC, PSLSPEC, COMPUTE,
NAME, INVARSPEC, FAIRNESS, JUSTICE, COMPASSION, ISA, ASSIGN,
CONSTRAINT, SIMPWFF, CTLWFF, LTLWFF, PSLWFF, COMPWFF, IN, MIN,
MAX, MIRROR, PRED, PREDICATES, process, array, of, boolean,
integer, real, word, word1, bool, signed, unsigned, extend,
resize, sizeof, uwconst, swconst, EX, AX, EF, AF, EG, AG, E, F, O, G,
H, X, Y, Z, A, U, S, V, T, BU, EBF, ABF, EBG, ABG, case, esac, mod, next,
init, union, in, xor, xnor, self, TRUE, FALSE, count, abs, max, min
To represent various values we will use integer numbers which are any nonempty
sequence of decimal digits preceded by an optional unary minus
integer_number ::
- digit
| digit
| integer_number digit
and symbolic constants which are identifiers
symbolic_constant :: identifier
Examples of integer numbers and symbolic constants are 3, -14,
007, OK, FAIL, waiting, stop. The values of symbolic constants and
integer numbers do not intersect.
2.1 Types Overview
This section provides an overview of the types that are recognised by NUSMV.
2.1.1 Boolean
The boolean type comprises symbolic values FALSE and TRUE.
2.1.2 Integer
The domain of the integer type is simply any whole number, positive or negative. At the moment,
there are implementation-dependent constraints on the this type and integer numbers
can only be in the range −231
+ 1 to 231
− 1 (more accurately, these values are equivalent to the
C/C++ macros INT MIN +1 and INT MAX).
2.1.3 Enumeration Types
An enumeration type is a type specified by full enumerations of all the values that the type comprises.
For example, the enumeration of values may be {stopped, running, waiting,
finished}, {2, 4, -2, 0}, {FAIL, 1, 3, 7, OK}, etc. All elements of an enumeration
have to be unique although the order of elements is not important.
However, in the NUSMV type system, expressions cannot be of actual enumeration types,
but of their simplified and generalised versions only. Such generalised enumeration types do
not contain information about the exact values constituting the types, but only the flag whether all
values are integer numbers, symbolic constants or both. Below only generalised
versions of enumeration types are explained.
7
The symbolic enum type covers enumerations containing only symbolic constants.
For example, the enumerations {stopped, running, waiting} and {FAIL, OK} belong
to the symbolic enum type.
There is also a integers-and-symbolic enum type. This type comprises enumerations
which contain both integer numbers and symbolic constants, for example, {-1,
1, waiting}, {0, 1, OK}, {running, stopped, waiting, 0}.
Another enumeration type is integer enum. Example of enumerations of integers are {2,
4, -2, 0} and {-1, 1}. In the NUSMV type system an expression of the type integer
enum is always converted to the type integer. Explaining the type of expression we will always
use the type integer instead of integer enum.
Enumerations cannot contain any boolean value (i.e.{FALSE, TRUE}). boolean type
must be declared as boolean.
To summarise, we actually deal only with two enumeration types: symbolic enum and
integers-and-symbolic enum. These types are distinguishable and have different operations
allowed on them.
2.1.4 Word
The unsigned word[•] and signed word[•] types are used to model vector of bits (booleans)
which allow bitwise logical and arithmetic operations (unsigned and signed, respectively). These
types are distinguishable by their width. For example, type unsigned word[3] represents vector
of three bits, which allows unsigned operations, and type signed word[7] represents vector of
seven bits, which allows signed operations.
When values of unsigned word[N] are interpreted as integer numbers the bit representation
used is the most popular one, i.e. each bit represents a successive power of 2 between 0 (bit
number 0) and 2N−1
(bit number N − 1). Thus unsigned word[N] is able to represent values
from 0 to 2N
− 1.
The bit representation of signed word[N] type is “two’s complement”, i.e. it is the same as
for unsigned word[N] except that the highest bit (number N − 1) has value −2N−1
. Thus the
possible value for signed word[N] are from −2N−1
to 2N−1
− 1.
2.1.5 Array
Arrays are declared with a lower and upper bound for the index, and the type of the elements in
the array. For example,
array 0..3 of boolean
array 10..20 of {OK, y, z}
array 1..8 of array -1..2 of unsigned word[5]
The type array 1..8 of array -1..2 of unsigned word[5] means an array of 8
elements (from 1 to 8), each of which is an array of 4 elements (from -1 to 2) that are 5-bit-long
unsigned words.
Array subtype is the immediate subtype of an array type. For example, subtype of array
1..8 of array -1..2 of unsigned word[5] is array -1..2 of unsigned word[5]
which has its own subtype unsigned word[5].
array types are incompatible with set type, i.e. array elements cannot be of set type.
Expression of array type can be constructed with array DEFINE (see 2.3.3) or variables of
array type (see 2.3.1).
2.1.6 Set Types
set types are used to identify expressions representing a set of values. There are four set types:
boolean set, integer set, symbolic set, integers-and-symbolic set. The set types can be
8
used in a very limited number of ways. In particular, a variable cannot be of a set type. Only
range constant and union operator can be used to create an expression of a set type, and
only in, case, (• ? • : •) and assignment1
expressions can have imediate operands of a set
type.
Every set type has a counterpart among other types. In particular,
the counterpart of a boolean set type is boolean,
the counterpart of a integer set type is integer,
the counterpart of a symbolic set type is symbolic enum,
the counterpart of a integers-and-symbolic set type is integers-and-symbolic enum.
Some types such as unsigned word[•] and signed word[•] do not have a set type counterpart.
2.1.7 Type Order
Figure 2.1 depicts the order existing between types in NUSMV.
boolean
integer symbolic enum
↓ ↓
integers-and-symbolic enum
unsigned word[1]
unsigned word[2]
unsigned word[3]
...
boolean set
integer set symbolic set
↓ ↓
integers-and-symbolic set
signed word[1]
signed word[2]
signed word[3]
...
array N1..M1 of subtype1
↓
array N2..M2 of subtype2
if and only if
N1=N2 subtype1
M1=M2, and ↓
subtype2
Figure 2.1: The ordering on the types in NUSMV
It means, for example, that integer is less than integers-and-symbolic enum, symbolic enum
is less than integers-and-symbolic enum, etc. The unsigned word[•] and signed word[•]
any other type or between each other. Any type is equal to itself.
Note that enumerations containing only integer numbers have the type integer.
For 2 arrays types array N1..M1 of subtype1 and array N2..M2 of
subtype2 the first type is less then the second one if and only if N1=N2, M1=M2 and type
subtype1 is less than subtype2.
2.2 Expressions
The previous versions of NuSMV (prior to 2.4.0) did not have the type system and as such expressions
were untyped. In the current version all expressions are typed and there are constraints
1For more information on these operators see pages 12, 18, 19, 20 and 28, respectively.
9
on the type of operands. Therefore, an expression may now potentially violate the type system,
i.e. be erroneous.
To maintain backward compatibility, there is a new system variable called
backward compatibility (and a correponding -old command line option) that
disables a few new features of version 2.4 to keep backward compatibility with old version of
NUSMV. In particular, if this system variable is set then type violations caused by expressions
of old types (i.e. enumeration type, boolean and integer) will be ignored by the type checker,
instead, warnings will be printed out. See description at page 50 for further information.
If additionally, the system variable type checking warning on is unset, then even
these warnings will not be printed out.
2.2.1 Implicit Type Conversion
In some expressions operands may be converted from one type to its set type counterpart (see
2.1.6). For example, integer can be converted to integer set type.
Note: Prior to version 2.5.1, implicit type conversion from integer to boolean (and viceversa)
was performed. Since version 2.5.1, implicit integer ¡-¿ boolean type conversion is no
longer supported, and explicit cast operators have to be used.
2.2.2 Constant Expressions
A constant can be a boolean, integer, symbolic, word or range constant.
constant ::
boolean_constant
| integer_constant
| symbolic_constant
| word_constant
| range_constant
Boolean Constant
A boolean constant is one of the symbolic values FALSE and TRUE. The type of a
boolean constant is boolean.
boolean_constant :: one of
FALSE TRUE
Integer Constant
An integer constant is an integer number. The type of an integer constant
is integer.
integer_constant :: integer_number
Symbolic Constant
A symbolic constant is syntactically an identifier and indicates a unique value.
symbolic_constant :: identifier
The type of a symbolic constant is symbolic enum. See Section 2.3.15 [Namespaces],
page 34 for more information about how symbolic constants are distinguished from other
identifiers, i.e. variables, defines, etc.
10
Word Constant
Word constant begins with digit 0, followed by optional character u (unsigned) or s
(signed) and one of the characters b/B (binary), o/O (octal), d/D (decimal) or h/H (hexadecimal)
which gives the base that the actual constant is in. Next comes an optional decimal integer
giving the number of bits, then the character , and lastly the constant value itself. Assuming N
is the width of the constant the type of a word constant is signed word[N] if character s is
provided, and unsigned word[N] otherwise. For example:
0sb5 10111 has type signed word[5]
0uo6 37 has type unsigned word[6]
0d11 9 has type unsigned word[11]
0sh12 a9 has type signed word[12]
The number of bits can be skipped, in which case the width is automatically calculated from
the number of digits in the constant and its base. It may be necessary to explicitly give leading
zeroes to make the type correct — the following are all equivalent declarations of the integer
constant 11 as a word of type unsigned word[8]:
0ud8 11
0ub8 1011
0b 00001011
0h 0b
0h8 b
The syntactic rule of the word constant is the following:
word_constant ::
0 [word_sign_specifier] word_base [word_width] _ word_value
word_sign_specifier :: one of
u s
word_width ::
integer_number -- a number greater than zero
word_base ::
b | B | o | O | d | D | h | H
word_value ::
hex_digit
| word_value hex_digit
| word_value
hex_digit :: one of
0 1 2 3 4 5 6 7 8 9 a b c d e f A B C D E F
Note that
• The width of a word must be a number strictly greater than 0.
• Decimal word constants must be declared with the width specifier, since the number
of bits needed for an expression like 0d 019 is unclear.
• Digits are restricted depending on the base the constant is given in.
• Digits can be separated by the underscore character (” ”) to aid clarity, for example
0b 0101 1111 1100 which is equivalent to 0b 010111111100.
11
• For a given width N the value of a constant has to be in range 0 . . . 2N
− 1. For decimal
signed words (both s and d are provided) the value of a constant has to be in range
0 . . . 2N−1
.
• The number of bits in word constant has an implementation limit which for most
systems is 64 bits.
Range Constant
A range constant specifies a set of consecutive integer numbers. For example, a constant
-1..5 indicates the set of numbers -1, 0, 1, 2, 3, 4 and 5. Other examples of
range constant can be 1..10, -10..-10, 1..300. The syntactic rule of the range
constant is the following:
range_constant ::
integer_number .. integer_number
with an additional constraint that the first integer number must be less than or equal to the second
integer number. The type of a range constant is integer set.
2.2.3 Basic Expressions
A basic expression is the most common kind of expression used in NUSMV.
basic_expr ::
constant -- a constant
| variable_identifier -- a variable identifier
| define_identifier -- a define identifier
| ( basic_expr )
| ! basic_expr -- logical or bitwise NOT
| abs ( basic expr ) -- absolute value
| max ( basic expr , basic expr ) -- max
| min ( basic expr , basic expr ) -- min
| basic_expr & basic_expr -- logical or bitwise AND
| basic_expr | basic_expr -- logical or bitwise OR
| basic_expr xor basic_expr -- logical or bitwise exclusive OR
| basic_expr xnor basic_expr -- logical or bitwise NOT exclusive OR
| basic_expr -> basic_expr -- logical or bitwise implication
| basic_expr <-> basic_expr -- logical or bitwise equivalence
| basic_expr = basic_expr -- equality
| basic_expr != basic_expr -- inequality
| basic_expr < basic_expr -- less than
| basic_expr > basic_expr -- greater than
| basic_expr <= basic_expr -- less than or equal
| basic_expr >= basic_expr -- greater than or equal
| - basic_expr -- integer unary minus
| basic_expr + basic_expr -- integer addition
| basic_expr - basic_expr -- integer subtraction
| basic_expr * basic_expr -- integer multiplication
| basic_expr / basic_expr -- integer division
| basic_expr mod basic_expr -- integer remainder
| basic_expr >> basic_expr -- bit shift right
| basic_expr << basic_expr -- bit shift left
| basic_expr [ index ] -- index subscript
| basic_expr [ basic_expr : basic_expr ]
-- word bits selection
12
| basic_expr :: basic_expr -- word concatenation
| word1 ( basic_expr ) -- boolean to unsigned word[1] conversion
| bool ( basic_expr ) -- unsigned word[1] and int to boolean conversion
| toint ( basic_expr ) -- word and boolean to integer constant conversion
| count ( basic_expr_list ) -- count of true boolean expressions
| swconst ( basic_expr , basic_expr )
-- integer to signed word constant conversion
| uwconst ( basic_expr, basic_expr )
-- integer to unsigned word constant conversion
| signed ( basic_expr ) -- unsigned word to signed word conversion
| unsigned ( basic_expr ) -- signed word to unsigned word conversion
| sizeof ( basic_expr ) -- word size as an integer
| extend ( basic_expr , basic_expr)
-- word width extension
| resize ( basic_expr , basic_expr)
-- word width resize
| basic_expr union basic_expr -- union of set expressions
| { set_body_expr } -- set expression
| basic_expr .. basic_expr -- pure integer set expression
| basic_expr in basic_expr -- inclusion in a set expression
| basic_expr ? basic_expr : basic_expr
-- if-then-else expression
| case_expr -- case expression
| basic_next_expr -- next expression
basic_expr_list ::
basic_expr
| basic_expr_list , basic_expr
The order of parsing precedence for operators from high to low is:
[ ] , [ : ]
!
::
- (unary minus)
* / mod
+ <<
>>
union
in
= != < > <= >=
&
| xor xnor
(• ? • : •)
<->
->
Operators of equal precedence associate to the left, except -> that associates to the right. The
constants and their types are explained in Section 2.2.2 [Constant Expressions], page 10.
Variables and Defines
A variable identifier and define identifier are expressions which identify a
variable or a define, respectively. Their syntax rules are:
13
define_identifier :: complex_identifier
variable_identifier :: complex_identifier
The syntax and semantics of complex identifiers are explained in Section 2.3.12 [References
to Module Components], page 32. All defines and variables referenced in expressions
should be declared. All identifiers (variables, defines, symbolic constants, etc) can be used prior
to their definition, i.e. there is no constraint on order such as in C where a declaration of a variable
should always be placed in text above the variable use. See more information about define
and variable declarations in Section 2.3.2 [DEFINE Declarations], page 27 and Section 2.3.1
[Variable Declarations], page 23.
A define is a kind of macro. Every time a define is met in expressions, it is substituted by the
expression associated with this define. Therefore, the type of a define is the type of the associated
expression in the current context. Define expressions may contain next operators; Normal rules
apply: No nested next operators.
variable identifier represents state, input, and frozen variables. The type of
a variable is specified in its declaration. For more information about variables, see Section
2.3 [Definition of the FSM], page 23, Section 2.3.1 [State Variables], page 24, Section
2.3.1 [Input Variables], page 24, and Section 2.3.1 [Frozen Variables], page 25. Since a
symbolic constant is syntactically indistinguishable from variable identifiers
and define identifiers, a symbol table is used to distinguish them from each other.
Parentheses
Parentheses may be used to group expressions. The type of the whole expression is the same as
the type of the expression in the parentheses.
Logical and Bitwise !
The signature of the logical and bitwise NOT operator ! is:
! : boolean → boolean
: unsigned word[N] → unsigned word[N]
: signed word[N] → signed word[N]
This means that the operation can be applied to boolean, unsigned word[•] and signed word[•]
operands. The type of the whole expression is the same as the type of the operand. If the operand
is not boolean, unsigned word[•] or signed word[•] then the expression violates the type
system and NUSMV will throw an error.
Logical and Bitwise &, |, xor, xnor, ->, <->
Logical and bitwise binary operators & (AND), | (OR), xor (exclusive OR), xnor (negated
exclusive OR), -> (implies) and <-> (if and only if) are similar to the unary operator !, except
that they take two operands. Their signature is:
&, |, xor, xnor, ->, <-> : boolean * boolean → boolean
: unsigned word[N] * unsigned word[N] → unsigned word[N]
: signed word[N] * signed word[N] → signed word[N]
the operands can be of boolean, unsigned word[•] or signed word[•] type, and the type of
the whole expression is the type of the operands. Note that both word operands should have the
same width.
14
Equality (=) and Inequality (!=)
The operators = (equality) and != (inequality) have the following signature:
=, != : boolean * boolean → boolean
: integer * integer → boolean
: symbolic enum * symbolic enum → boolean
: integers-and-symbolic enum * integers-and-symbolic enum → boolean
: unsigned word[N] * unsigned word[N] → boolean
: signed word[N] * signed word[N] → boolean
No implicit type conversion is performed. For example, in the expression
TRUE = 5
the left operand is of type boolean and the right one is of type integer. Though the signature
of the operation does not have a boolean * integer rule, the expression is not correct, because
no implicit type conversion will be performed. One can use the toint or the bool for explicit
casts.
For example:
toint(TRUE) = 5
or
TRUE = bool(5)
This is also true if one of the operands is of type unsigned word[1] and the other one is of the
type boolean. Explicit cast must be used (e.g. using word1 or bool)
Relational Operators >, <, >=, <=
The relational operators > (greater than), < (less than), >= (greater than or equal to) and <=
(less than or equal to) have the following signature:
>, <, >=, <= : integer * integer → boolean
: unsigned word[N] * unsigned word[N] → boolean
: signed word[N] * signed word[N] → boolean
Arithmetic Operators +, -, *, /
The arithmetic operators + (addition), - (unary negation or binary subtraction), * (multiplication)
and / (division) have the following signature:
+, -, *, / : integer * integer → integer
: unsigned word[N] * unsigned word[N] → unsigned word[N]
: signed word[N] * signed word[N] → signed word[N]
- (unary) : integer → integer
: unsigned word[N] → unsigned word[N]
: signed word[N] → signed word[N]
Before checking the expression for being correctly typed, the implicit type conversion can be
applied to one of the operands. If the operators are applied to unsigned word[N] or signed
word[N] type, then the operations are performed modulo 2N
.
The result of the / operator is the quotient from the division of the first operand by the
second. The result of the / operator is the algebraic quotient with any fractional part discarded
(this is often called “truncation towards zero”). If the quotient a/b is representable, the expression
(a/b)*b + (a mod b) shall equal a. If the value of the second operand is zero, the
behavior is undefined and an error is thrown by NUSMV. The semantics is equivalent to the
corresponding one of C/C++ languages.
In the versions of NUSMV prior to 2.4.0 the semantics of division was different. See page
16 for more detail.
15
Remainder Operator mod
The result of the mod operator is the algebraic remainder of the division. If the value of the
second operand is zero, the behavior is undefined and an error is thrown by NUSMV.
The signature of the remainder operator is:
mod : integer * integer → integer
: unsigned word[N] * unsigned word[N] → unsigned word[N]
: signed word[N] * signed word[N] → signed word[N]
The semantics of mod operator is equivalent to the corresponding operator % of C/C++ languages.
Thus if the quotient a/b is representable, the expression (a/b)*b + (a mod b)
shall equal a.
Note: in older versions of NUSMV (priori 2.4.0) the semantics of quotient and remainder
were different. Having the division and remainder operators / and mod be of the current, i.e.
C/C++’s, semantics the older semantics of division was given by the formula:
IF (a mod b < 0) THEN (a / b − 1) ELSE (a / b)
and the semantics of remainder operator was given by the formula:
IF (a mod b < 0) THEN (a mod b + b) ELSE (a mod b)
Note that in both versions the equation (a/b)*b + (a mod b) = a holds. For example,
in the current version of NuSMV the following holds:
7/5 = 1 7 mod 5 = 2
-7/5 = -1 -7 mod 5 = -2
7/-5=-1 7 mod -5 = 2
-7/-5=1 -7 mod -5 = -2
whereas in the older versions on NuSMV the equations were
7/5 = 1 7 mod 5 = 2
-7/5 = -2 -7 mod 5 = 3
7/-5=-1 7 mod -5 = 2
-7/-5=0 -7 mod -5 = -7
When supplied, the command line option -old div op switches the semantics of division and
remainder to the old one.
Note: semantics of modulo operator can be obtained from the remainder operator by exploiting
the equivalence:
(n modulo M) ≡ ((n mod M) + M) mod M
Where mod is the remainder operator.
Shift Operators <<, >>
The signature of the shift operators is:
<<, >> : unsigned word[N] * integer → unsigned word[N]
: signed word[N] * integer → signed word[N]
: unsigned word[N] * unsigned word[M] → unsigned word[N]
: signed word[N] * unsigned word[M] → signed word[N]
Before checking the expression for being correctly typed, the right operand can be implicitly
converted from boolean to integer type.
Left shift << (right shift >>) operation shifts to the left (right) the bits of the left operand by
the number specified in the right operand. A shift by N bits is equivalent to N shifts by 1 bit. A
bit shifted behind the word bound is lost. During shifting a word is padded with zeros with the
exception of the right shift for signed word[•], in which case a word is padded with its highest
bit. For instance,
16
0ub4 0101 << 2 is equal to 0sb3 1011 >> 2 is equal to
0ub4 0100 << 1 is equal to 0sb3 1110 >> 1 is equal to
0ub4 1000 << 0 is equal to 0sb3 1111 >> 0 is equal to
0ub4 1000 and 0sb3 1111
It has to be remarked that the shifting requires the right operand to be greater or equal to zero
and less then or equal to the width of the word it is applied to. NUSMV raises an error if a shift
is attempted that does not satisfy this restriction.
Index Subscript Operator [ ]
The index subscript operator extracts one element of an array in the typical fashion. On the
left of [] there has to be an expression of array type. The index expression in the brackets
has to be an expression of integer or word[•] type with value greater or equal to lower bound
and less or equal to the upper bound of the array. The signature of the index subscript operator is:
[ ] : array N..M of subtype * word[N] → subtype
: array N..M of subtype * integer → subtype
For example, for below declarations 2
:
MODULE main
VAR a : array -1 .. 4 of array 1 .. 2 of boolean;
DEFINE d := [[12, 4], [-1,2]];
VAR r : 0..1;
expressions a[-1], a[0][r+1] and d[r][1] are valid whereas a[0], a[0][r] and
d[0][r-1] will cause out of bound error.
Bit Selection Operator [ : ]
The bit selection operator extracts consecutive bits from a unsigned word[•] or signed word[•]
expression, resulting in a new unsigned word[•] expression. This operation always decreases
the width of a word or leaves it intact. The expressions in the brackets have to be integer
constants which specify the high and low bound. The high bound must be greater than or equal
to the low bound. The bits count from 0. The result of the operations is unsigned word[•]
value consisting of the consecutive bits beginning from the high bound of the operand down
to, and including, the low bound bit. For example, 0sb7 1011001[4:1] extracts bits 1 through 4
(including 1st and 4th bits) and is equal to 0ub4 1100. 0ub3 101[0:0] extracts bit number 0 and
is equal to 0ub1 1.
The signature of the bit selection operator is:
[ : ] : unsigned word[N] * integerh * integerl → unsigned word[integerh − integerl + 1]
: signed word[N] * integerh * integerl → unsigned word[integerh − integerl + 1]
where 0 ≤ integerl ≤ integerh < N
Word Concatenation Operator ::
The concatenation operator joins two words (unsigned word[•] or signed word[•] or both)
together to create a larger unsigned word[•] type. The operator itself is two colons (::), and
its signature is as follows:
:: : word[M] * word[N] → unsigned word[M+N]
2See 2.3.3) for array defines and 2.3.1 for array variables.
17
where word[N] is unsigned word[N] or signed word[N]. The left-hand operand will make up
the upper bits of the new word, and the right-hand operand will make up the lower bits. The
result is always unsigned word[•]. For example, given the two words w1 := 0ub4 1101
and w2 := 0sb2 00, the result of w1::w2 is 0ub6 110100.
Word sizeof Operator
sizeof operator provides a very simple way for retrieving the width of a word. The behavior
of this operator can be described as follows:
let w be a word[N] : sizeof (w) returns N.
The signature of the operator is:
sizeof : unsigned word[•] → integer
: signed word[•] → integer
Extend Word Conversions
extend operator increases the width of a word by attaching additional bits on the left. If the
provided word is unsigned then zeros are added, otherwise if the word is signed the highest (sing)
bit is repeated corresponding number of times.
The signature of the operator is:
extend : unsigned word[N] * integer → unsigned word[N+integer ]
: signed word[N] * integer → signed word[N+integer ]
For example:
extend(0ub3 101, 2) = 0ub5 00101
extend(0sb3 101, 2) = 0sb5 11101
extend(0sb3 011, 2) = 0sb5 00011
Note that the right operand of extend has to be an integer constant greater or equal to zero.
Resize Word Conversions
resize operator provides a more comfortable way of changing the width of a word. The
behavior of this operator can be described as follows:
let w be a M bits unsigned word[•] and N be the required width: if M = N, w is returned
unmodified; if N is less than M, bits in the range [N-1:0] are extracted from w; if N is greater
than M, w is extended of (N - M) bits up to required width, padding with zeroes.
let w be a M bits signed word[•] and N be the required width: if M = N, w is returned
unmodified; if N is less than M, bits in the range [N-2:0] are extracted from w, while N-1-ith bit
is forced to preserve the value of the original sign bit of w (M-1-ith bit); if N is greater than M,
w is extended of (N - M) bits up to required width, extending sign bit.
The signature of the operator is:
resize : unsigned word[•] * integer → unsigned word[integer ]
: signed word[•] * integer → signed word[integer ]
Set Expressions
The set expression is an expression defining a set of boolean, integer and symbolic enum
values. A set expression can be created with the union operator. For example, 1 union 0
specifies the set of values 1 and 0. One or both of the operands of union can be sets. In this
18
case, union returns a union of these sets. For example, expression (1 union 0) union
-3 specifies the set of values 1, 0 and -3.
Note that there cannot be a set of sets in NuSMV. Sets can contain only singleton values, but
not other sets.
The signature of the union operator is:
union : boolean set * boolean set → boolean set
: integer set * integer set → integer set
: symbolic set * symbolic set → symbolic set
: integers-and-symbolic set * integers-and-symbolic set
→ integers-and-symbolic set
Before checking the expression for being correctly typed, if it is possible, both operands are
converted to their counterpart set types 3
, which virtually means converting individual values
to singleton sets. Then both operands are implicitly converted to a minimal type that covers
both operands. If after these manipulations the operands do not satisfy the signature of union
operator, an error is raised by NUSMV.
There is also another way to write a set expression by enumerating all its values between
curly brackets. The syntactic rule for the values in curly brackets is:
set_body_expr ::
basic_expr
| set_body_expr , basic_expr
Enumerating values in curly brackets is semantically equivalent to writing them connected
by union operators. For example, expression {exp1, exp2, exp3} is equivalent to exp1
union exp2 union exp3. Note that according to the semantics of union operator, expression
{{1, 2}, {3, 4}} is equivalent to {1, 2, 3, 4}, i.e. there is no actually set of
sets.
Yet another way to write a set expression is to use the binary operator .. (<TWO DOTS>).
The two operands have both to be expressions that evaluate to constants integer numbers, and
may contain names of defines and module formal parameters. For example, -1 - P1 .. 5
+ D1, where P1 refers to a module formal parameter, and D1 refers to a define. Both P1 and
D1 have to be statically evaluable to integer constants.
This is just a shorthand for a set expression containing the list of integer
numbers included between the lower and the upper bound. For example, -1..5 and
{-1,0,1,2,3,4,5} are equivalent. Note that the evaluated number on the left from the
two dots must be less than or equal to the evaluated number on the right.
Set expressions can be used only as operands of union and in operations, as the right
operand of case and as the second and the third operand of (• ? • : •) expressions and
assignments. In all other places the use of set expressions is prohibited.
Inclusion Operator in
The inclusion operator ‘in’ tests the left operand for being a subset of the right operand. If either
operand is a number or a symbolic value instead of a set, it is coerced to a singleton set.
The signature of the in operator is:
in : boolean set * boolean set → boolean
: integer set * integer set → boolean
: symbolic set * symbolic set → boolean
: integers-and-symbolic set * integers-and-symbolic set → boolean
Similar to union operation, before checking the expression for being correctly typed, if it is
3See 2.1.6 for more information about the set types and their counterpart types
19
possible, both operands are converted to their counterpart set types 4
. Then, if required, implicit
type conversion is carried out on one of the operands.
Case Expressions
A case expression has the following syntax:
case_expr :: case case_body esac
case_body ::
basic_expr : basic_expr ;
| case_body basic_expr : basic_expr ;
A case expr returns the value of the first expression on the right hand side of ‘:’, such that
the corresponding condition on the left hand side evaluates to TRUE. For example, the result of
the expression
case
left_expression_1 : right_expression_1 ;
left_expression_2 : right_expression_2 ;
...
left_expression_N : right_expression_N ;
esac
is right expression k such that for all i from 0 to k−1, left expression i is FALSE,
and left expression k is TRUE. It is an error if all expressions on the left hand side evaluate
to FALSE.
The type of expressions on the left hand side must be boolean. If one of the expression on
the right is of a set type then, if it is possible, all remaining expressions on the right are converted
to their counterpart set types 5
. The type of the whole expression is such a minimal type6
that all
of the expressions on the right (after possible convertion to set types) can be implicitly converted
to this type. If this is not possible, NUSMV throws an error.
Note: Prior to version 2.5.1, using 1 as left expression N was pretty common, e.g:
case
cond1 : expr1;
cond2 : expr2;
...
1 : exprN; -- otherwise
esac
Since version 2.5.1 integer values are no longer implicitly casted to boolean, and 1 has to
be written as TRUE instead. For backward compatibility options, please see page 50.
If-Then-Else expressions
In certain cases, the syntax described above may look a bit awkard. In simpler cases, it is possible
to use the alternative, terser, (• ? • : •) expression. This construct is defined as follows:
cond_expr ? basic_expr1 : basic_expr2
This expression evaluates to basic expr1 if the condition in cond expr evaluates to true, and
to basic expr2 otherwise. Therefore, the expressions cond1 ? exp1 : exp2 and case
cond1 : exp1; TRUE : expr2; esac are equivalent.
4See 2.1.6 for more information about the set types and their counterpart types
5See 2.1.6 for information on set types and their counterpart types
6See Section 2.1.7 [Type Order], page 9 for the information on the order of types.
20
Basic Next Expression
Next expressions refer to the values of variables in the next state. For example, if a
variable v is a state variable, then next(v) refers to that variable v in the next time step.
A next applied to a complex expression is a shorthand method of applying next to all the
variables in the expressions recursively. Example: next((1 + a) + b) is equivalent to
(1 + next(a)) + next(b). Note that the next operator cannot be applied twice, i.e.
next(next(a)) is not allowed.
The syntactic rule is:
basic_next_expr :: next ( basic_expr )
A next expression does not change the type.
Count Operator
The count operator counts the number of expressions which are true. The count operator is a
syntactic sugar for
toint (bool_expr1) +
toint (bool_expr2) +
... +
toint (bool_exprN)
This operator has been introduced in version 2.5.1, to simplify the porting of those models which
exploited the implicit casting of integer to boolean to encoding e.g. predicates like:
(b0 + b1 + ... + bN) < 3 -- at most two bits are enabled
Since version 2.5.1, this expression can be written as:
count(b0, b1... , bN) < 3
2.2.4 Simple and Next Expressions
Simple expressions are expressions built only from the values of variables in the current
state. Therefore, the simple expression cannot have a next operation inside and the
syntax of simple expressions is as follows:
simple_expr :: basic_expr
with the alternative basic next expr not allowed. Simple expressions can be used
to specify sets of states, for example, the initial set of states. The next expression relates
current and next state variables to express transitions in the FSM. The next expression can
have next operation inside, i.e.
next_expr :: basic_expr
with the alternative basic next expr allowed.
2.2.5 Type conversion operators
Integer conversion operator
toint converts an unsigned word[•] constant or a signed word[•] constant, or a
boolean expression to an integer representing its value. Also integer expressions are allowed,
but no action is performed. The signature of this conversion operator is:
21
toint : integer → integer
toint : boolean → integer
toint : unsigned word[•] → integer
toint : signed word[•] → integer
Warning: using the toint operator with word variables may cause bad performances of
the system. Performances may degrade with the increase of the number of bits of the word
expression.
Boolean conversion operator
bool converts unsigned word[1] and integer expressions to boolean. Also boolean expressions
are allowed, but no action is perfomed. In case of integer expression, the result of the
conversion is FALSE if the expression resolves to 0, TRUE otherwise. In case of unsigned
word[1] expression, the conversion obeys the following table:
bool(0ub1 0) = FALSE
bool(0ub1 1) = TRUE
Integer to Word Constants Conversion
swconst, uwconst convert an integer constant into a signed word[•] constant or
unsigned word[•] constant of given size respectively. The signature of these conversion
operator is:
swconst : integer * integer → signed word[•]
uwconst : integer * integer → unsigned word[•]
Where the left integer parameter is the value and the right integer parameter is the size in bits
of the generated unsigned word[•] or signed word[•] constant.
Word1 Explicit Conversions
word1 converts a boolean to a unsigned word[1]. The signature of this conversion operator is:
word1 : boolean → unsigned word[1]
The conversion obeys the following table:
word1(FALSE) = 0ub1 0
word1(TRUE) = 0ub1 1
Unsigned and Signed Explicit Conversions
unsigned converts a signed word[N] to an unsigned word[N], while signed performs the
opposite operation and converts an unsigned word[N] to a signed word[N]. Both operations
do not change the bit representation of a provided word. The signatures of these conversion
operators are:
unsigned : signed word[N] → unsigned word[N]
signed : unsigned word[N] → signed word[N]
For example:
signed(0ub 101) = 0sb 101
signed(0ud3 5) = -0sd3 3
unsigned(0sb 101) = 0usb 101
unsigned(-0sd3 3) = 0ud3 5
22
2.3 Definition of the FSM
We consider a Finite State Machine (FSM) described in terms of state variables, input variables,
and frozen variables, which may assume different values in different states, of a transition relation
describing how inputs leads from one state to possibly many different states, and of Fairness
conditions that describe constraints on the valid paths of the execution of the FSM. In this document,
we distinguish among constraints (used to constrain the behavior of a FSM, e.g. a modulo
4 counter increments its value modulo 4), and specifications (used to express properties to verify
on the FSM (e.g. the counter reaches value 3).
In the following it is described how these concepts can be declared in the NUSMV language.
2.3.1 Variable Declarations
A variable can be an input, a frozen, or a state variable. The declaration of a variable specifies
the variable’s type with the help of type specifier.
Type Specifiers
A type specifier has the following syntax:
type_specifier ::
simple_type_specifier
| module_type_specifier
simple_type_specifier ::
boolean
| word [ basic_expr ]
| unsigned word [ basic_expr ]
| signed word [ basic_expr ]
| { enumeration_type_body }
| basic_expr .. basic_expr
| array basic_expr .. basic_expr
of simple_type_specifier
enumeration_type_body ::
enumeration_type_value
| enumeration_type_body , enumeration_type_value
enumeration_type_value ::
symbolic_constant
| integer_number
There are two kinds of type specifier: a simple type specifier and a module
type specifier. The module type specifier is explained later in Section 2.3.11
[MODULE Instantiations], page 31. The simple type specifier comprises boolean
type, integer type, enumeration types, unsigned word[•], signed word[•] and arrays types.
The boolean type is specified by the keyword boolean.
A enumeration type is specified by full enumeration of all the values the type comprises.
For example, possible enumeration type specifiers are {0,2,3,-1}, {1,0, OK}, {OK,
FAIL, running}. FALSE and TRUE values cannot be used as enumeration type specifiers
The values in the list are enclosed in curly brackets and separated by commas. The values
may be integer numbers, symbolic constants, or both. All values in the list should
be distinct from each other, although the order of values is not important.
Note, expressions cannot be of the actual enumeration types, but only the simplified versions
of enumeration types, such as symbolic enum and integers-and-symbolic enum.
23
A type specifier can be given by two expressions separated by .. (<TWO DOTS>).
The two expressions have both to evaluate to constants integer numbers, and may contain names
of defines and module formal parameters. For example, -1 - P1 .. 5 + D1, where P1
refers to a module formal parameter, and D1 refers to a define. Both P1 and D1 have to be
statically evaluable to integer constants.
This is just a shorthand for a enumeration type containing the list of integer numbers
from the range given in type specifier. For example, the type specifiers -1..5
and {-1,0,1,2,3,4,5} are equivalent. Note that the evaluated number on the left from the
two dots must be less than or equal to the evaluated number on the right.
The unsigned word[•] type is specified by the keywords unsigned word (where
unsigned may be skipped) with a basic expr supplied in square brackets. The expression
must be statically evaluable to a constant integer number whose value must be greater than
zero. The signed word[•] type is specified in a similar way with the keywords signed word.
The purpose of the word types is to offer integer and bitwise arithmetic.
An array type is denoted by a sequence of the keyword array, a basic expr specifying
the lower bound of the array index, two dots .., a basic expr specifying the upper bound of
the array index, the keyword of, and the type of array’s elements. The elements can themselves
be arrays. The two bound expressions have to be statically evaluable to constant integer numbers,
and may contain names of defines and module formal parameters.
State Variables
A state of the model is an assignment of values to a set of state and frozen variables. State
variables (and also instances of modules) are declared by the notation:
var_declaration :: VAR var_list
var_list :: identifier : type_specifier ;
| var_list identifier : type_specifier ;
A variable declaration specifies the identifier of the variables and its type. A variable
can take the values only from the domain of its type. In particular, a variable of a enumeration
type may take only the values enumerated in the type specifier of the declaration.
Input Variables
IVAR s (input variables) are used to label transitions of the Finite State Machine. The difference
between the syntax for the input and state variables declarations is the keyword indicating the
beginning of a declaration:
ivar_declaration :: IVAR simple_var_list
simple_var_list ::
identifier : simple_type_specifier ;
| simple_var_list identifier : simple_type_specifier ;
Another difference between input and state variables is that input variables cannot be instances
of modules. The usage of input variables is more limited than the usage of state variables which
can occur everywhere both in the model and specifications. Namely, input variables cannot occur
in:
• Left-side of assignments. For example all these assignments are not allowed:
IVAR i : boolean;
ASSIGN
init(i) := TRUE;
next(i) := FALSE;
24
• INIT statements. For example:
IVAR i : boolean;
VAR s : boolean;
INIT i = s
• Scope of next expressions. For example:
IVAR i : boolean;
VAR s : boolean;
TRANS i -> s – this is allowed
TRANS next(i -> s) – this is NOT allowed
• Some specification kinds: CTLSPEC, SPEC, INVARSPEC, COMPUTE, PSLSPEC. For
example:
IVAR i : boolean;
VAR s : boolean;
SPEC AF (i -> s) – this is NOT allowed
LTLSPEC F (X i -> s) – this is allowed
• Anywhere in the FSM when checking invariants with BMC and the “DUAL” algorithm.
See at page 82 for further information.
Frozen Variables
FROZENVAR s (frozen variables) are variables that retain their initial value throughout the evolution
of the state machine; this initial value can be constrained in the same ways as for normal
state variables. Similar to input variables the difference between the syntax for the frozen and
state variables declarations is the keyword indicating the beginning of a declaration:
frozenvar_declaration :: FROZENVAR simple_var_list
The semantics of some frozen variable a is that of a state variable accompanied by an assignment
that keeps its value constant (it is handled more efficiently, though):
ASSIGN next(a) := a;
As a consequence, frozen variables may not have their current and next value set in an
ASSIGN statement, i.e. statements such as ASSIGN next(a) := expr; and ASSIGN a
:= expr; are illegal. Apart from that frozen variables may occur in the definition of the FSM
in any place in which a state variable may occur. Some examples are as follows:
• Left-side current and next state assignments are illegal, while init state assignments are
allowed:
FROZENVAR a : boolean;
FROZENVAR b : boolean;
FROZENVAR c : boolean;
VAR d : boolean;
FROZENVAR e : boolean;
ASSIGN
init(a) := d; -- legal
next(b) := d; -- illegal
c := d; -- illegal
e := a; -- also illegal
• INIT, TRANS, INVAR, FAIRNESS, JUSTICE, and COMPASSION statements are all
legal. So is the scope of a next expression. For example:
-- the following has an empty state space
FROZENVAR a : boolean;
25
INIT a
INVAR !a
-- alternatively, this has two initial states, deadlocking
FROZENVAR b : boolean;
TRANS next(b) <-> !b
-- and that’s just unfair
FROZENVAR c : boolean;
FAIRNESS c
FAIRNESS !c
• All kinds of specifications involving frozen variables are allowed, e.g.:
FROZENVAR c : boolean;
-- True by definition.
SPEC AG ((c -> AG c) & ((!c) -> AG !c))
-- Here, neither is true.
INVARSPEC c
INVARSPEC !c
-- False (as above).
LTLSPEC (G F c) & (G F !c)
Examples
Below are examples of state, frozen, and input variable declarations:
VAR a : boolean;
FROZENVAR b : 0..1;
IVAR c : {TRUE, FALSE};
The variable a is a state variable, b is a frozen variable, and c is an input variable; In the
following examples:
VAR d : {stopped, running, waiting, finished};
VAR e : {2, 4, -2, 0};
VAR f : {1, a, 3, d, q, 4};
the variables d, e and f are of enumeration types, and all their possible values are specified in
the type specifiers of their declarations.
VAR g : unsigned word[3];
VAR h : word[3];
VAR i : signed word[4];
The variables g and h are of 3-bits-wide unsigned word type (i.e. unsigned word[3]), and i is
of 4-bits-wide signed word type (i.e. signed word[4]).
VAR j : array -1..1 of boolean;
The variable j is an array of boolean elements with indexes -1, 0 and 1.
26
2.3.2 DEFINE Declarations
In order to make descriptions more concise, a symbol can be associated with a common expression,
and a DEFINE declaration introduces such a symbol. The syntax for this kind of declaration
is:
define_declaration :: DEFINE define_body
define_body :: identifier := simple_expr ;
| define_body identifier := simple_expr ;
DEFINE associates an identifier on the left hand side of the ‘:=’ with an expression
on the right side. A define statement can be considered as a macro. Whenever a define
identifier occurs in an expression, the identifier is syntactically replaced by the expression
it is associated with. The associated expression is always evaluated in the context of
the statement where the identifier is declared (see Section 2.3.16 [Context], page 36 for an
explanation of contexts). Forward references to defined symbols are allowed but circular definitions
are not, and result in an error. The difference between defined symbols and variables is that
while variables are statically typed, definitions are not.
2.3.3 Array Define Declarations
It is possible to specify an array expressions. This feature is experimental and currently available
only through DEFINE declaration. The syntax for this kind of declaration is:
array_define_declaration ::
DEFINE identifier := array_expression ;
array_expression :: [ array_contents ]
| [ array_expression_list ]
array_expression_list :: array_expression
| array_expression , array_expression_list
array_contents :: next_expr , array_contents
| next_expr
Array DEFINE associates an identifier on the left hand side of the ‘:=’ with an array
expression. As a normal DEFINE statement an array define is considered as a macro. Whenever
an array identifier occurs in an expression, the identifier is syntactically replaced by
the array expression it is associated with. As with normal DEFINE an array DEFINE expression
is always evaluated in the context of the statement where the identifier is declared and
forward references to defined symbols are allowed but circular definitions are not.
The type of an array expression [exp1, exp2, ..., expN] is array 0..N-1 of type
where type is the least type such that all exp1, exp2, ...expN can be converted to it.
It is not possible to declare asymmetrical arrays. This means that it is forbidden to declare
an array with a different number of elements in a dimension. For example, the following code
will result in an error:
DEFINE
x := [[1,2,3], [1,2]];
2.3.4 CONSTANTS Declarations
CONSTANTS declarations allow the user to explicitly declare symbolic constants that might occur
or not within the FSM that is being defined. CONSTANTS declarations are expecially useful
27
in those conditions that require symbolic constants to occur only in DEFINEs body (e.g. in generated
models). For an example of usage see also the command write boolean model. A
constant is allowed to be declared multiple times, as after the first declaration any further declaration
will be ignored. CONSTANTS declarations are an extension of the original SMV grammar,
and they are supported since NuSMV 2.6. The syntax for this kind of declaration is:
constants_declaration :: CONSTANTS constants_body ;
constants_body :: identifier
| constants_body , identifier
2.3.5 INIT Constraint
The set of initial states of the model is determined by a boolean expression under the INIT
keyword. The syntax of an INIT constraint is:
init_constrain :: INIT simple_expr [;]
Since the expression in the INIT constraint is a simple expression, it cannot contain the
next() operator. The expression also has to be of type boolean. If there is more than one
INIT constraint, the initial set is the conjunction of all of the INIT constraints.
2.3.6 INVAR Constraint
The set of invariant states can be specified using a boolean expression under the INVAR keyword.
The syntax of an INVAR constraint is:
invar_constraint :: INVAR simple_expr [;]
Since the expression in the INVAR constraint is a simple expression, it cannot contain the
next() operator. If there is more than one INVAR constraint, the invariant set is the conjunction
of all of the INVAR constraints.
2.3.7 TRANS Constraint
The transition relation of the model is a set of current state/next state pairs. Whether or not a
given pair is in this set is determined by a boolean expression, introduced by the TRANS keyword.
The syntax of a TRANS constraint is:
trans_constraint :: TRANS next_expr [;]
It is an error for the expression to be not of the boolean type. If there is more than one TRANS
constraint, the transition relation is the conjunction of all of TRANS constraints.
2.3.8 ASSIGN Constraint
An assignment has the form:
assign_constraint :: ASSIGN assign_list
assign_list :: assign ;
| assign_list assign ;
assign ::
complex_identifier := simple_expr
| init ( complex_identifier ) := simple_expr
| next ( complex_identifier ) := next_expr
28
On the left hand side of the assignment, identifier denotes the current value of a variable,
‘init(identifier)’ denotes its initial value, and ‘next(identifier)’ denotes
its value in the next state. If the expression on the right hand side evaluates to a not-set expression
such as integer number or symbolic constant, the assignment simply means
that the left hand side is equal to the right hand side. On the other hand, if the expression evaluates
to a set, then the assignment means that the left hand side is contained in that set. It is an
error if the value of the expression is not contained in the range of the variable on the left hand
side.
Semantically assignments can be expressed using other kinds of constraints:
ASSIGN a := exp; is equivalent to INVAR a in exp;
ASSIGN init(a) := exp; is equivalent to INIT a in exp;
ASSIGN next(a) := exp; is equivalent to TRANS next(a) in exp;
Notice that, an additional constraint is forced when assignments are used with respect to their
corresponding constraints counterpart: when a variable is assigned a value that it is not an element
of its declared type, an error is raised.
The allowed types of the assignment operator are:
:= : integer * integer
: integer * integer set
: symbolic enum * symbolic enum
: symbolic enum * symbolic set
: integers-and-symbolic enum * integers-and-symbolic enum
: integers-and-symbolic enum * integers-and-symbolic set
: unsigned word[N] * unsigned word[N]
: signed word[N] * signed word[N]
Before checking the assignment for being correctly typed, the implicit type conversion can be
applied to the right operand.
Rules for assignments
Assignments describe a system of equations that say how the FSM evolves through time. With
an arbitrary set of equations there is no guarantee that a solution exists or that it is unique. We
tackle this problem by placing certain restrictive syntactic rules on the structure of assignments,
thus guaranteeing that the program is implementable.
The restriction rules for assignments are:
• The single assignment rule – each variable may be assigned only once.
• The circular dependency rule – a set of equations must not have “cycles” in its dependency
graph not broken by delays.
The single assignment rule disregards conflicting definitions, and can be formulated as: one
may either assign a value to a variable “x”, or to “next( x)” and “init( x)”, but not both.
For instance, the following are legal assignments:
Example 1 x := expr1 ;
Example 2 init( x ) := expr1 ;
Example 3 next( x ) := expr1 ;
Example 4 init( x ) := expr1 ;
next( x ) := expr2 ;
while the following are illegal assignments:
29
Example 1 x := expr1 ;
x := expr2 ;
Example 2 init( x ) := expr1 ;
init( x ) := expr2 ;
Example 3 x := expr1 ;
init( x ) := expr2 ;
Example 4 x := expr1 ;
next( x ) := expr2 ;
If we have an assignment like x := y ;, then we say that x depends on y. A combinatorial
loop is a cycle of dependencies not broken by delays. For instance, the assignments:
x := y;
y := x;
form a combinatorial loop. Indeed, there is no fixed order in which we can compute x and y,
since at each time instant the value of x depends on the value of y and vice-versa. We can
introduce a “unit delay dependency” using the next() operator.
x := y;
next(y) := x;
In this case, there is a unit delay dependency between x and y. A combinatorial loop is a cycle
of dependencies whose total delay is zero. In NUSMV combinatorial loops are illegal. This
guarantees that for any set of equations describing the behavior of variable, there is at least one
solution. There might be multiple solutions in the case of unassigned variables or in the case of
non-deterministic assignments such as in the following example,
next(x) := case x = 1 : 1;
TRUE : {0,1};
esac;
2.3.9 FAIRNESS Constraints
A fairness constraint restricts the attention only to fair execution paths. When evaluating specifications,
the model checker considers path quantifiers to apply only to fair paths.
NUSMV supports two types of fairness constraints, namely justice constraints and compassion
constraints. A justice constraint consists of a formula f, which is assumed to be true
infinitely often in all the fair paths. In NUSMV, justice constraints are identified by keywords
JUSTICE and, for backward compatibility, FAIRNESS. A compassion constraint consists of a
pair of formulas (p,q); if property p is true infinitely often in a fair path, then also formula q
has to be true infinitely often in the fair path. In NUSMV, compassion constraints are identified
by keyword COMPASSION. 7
If compassion constraints are used, then the model must not contain
any input variables. Currently, NUSMV does not enforce this so it is the responsibility of
the user to make sure that this is the case.
Fairness constraints are declared using the following syntax (all expressions are expected to
be boolean):
fairness_constraint ::
FAIRNESS simple_expr [;]
| JUSTICE simple_expr [;]
| COMPASSION ( simple_expr , simple_expr ) [;]
A path is considered fair if and only if it satisfies all the constraints declared in this manner.
7In the current version of NUSMV, compassion constraints are supported only for BDD-based LTL
model checking. We plan to add support for compassion constraints also for CTL specifications and in
Bounded Model Checking in the next releases of NUSMV.
30
2.3.10 MODULE Declarations
A module declaration is an encapsulated collection of declarations, constraints and specifications.
A module declaration also opens a new identifier scope. Once defined, a module can be
reused as many times as necessary. Modules are used in such a way that each instance of a module
refers to different data structures. A module can contain instances of other modules, allowing
a structural hierarchy to be built. The syntax of a module declaration is as follows:
module :: MODULE identifier [( module_parameters )] [module_body]
module_parameters ::
identifier
| module_parameters , identifier
module_body ::
module_element
| module_body module_element
module_element ::
var_declaration
| ivar_declaration
| frozenvar_declaration
| define_declaration
| constants_declaration
| assign_constraint
| trans_constraint
| init_constraint
| invar_constraint
| fairness_constraint
| ctl_specification
| invar_specification
| ltl_specification
| compute_specification
| isa_declaration
The identifier immediately following the keyword MODULE is the name associated with
the module. Module names have a separate name space in the program, and hence may clash
with names of variables and definitions. The optional list of identifiers in parentheses are the
formal parameters of the module.
2.3.11 MODULE Instantiations
An instance of a module is created using the VAR declaration (see Section 2.3.1 [State Variables],
page 24) with a module type specifier (see Section 2.3.1 [Type Specifiers], page 23). The syntax
of a module type specifier is:
module_type_specifier ::
| identifier [ ( [ parameter_list ] ) ]
| process identifier [ ( [ parameter_list ] ) ]
parameter_list ::
next_expr
| parameter_list , next_expr
A variable declaration with a module type specifier introduces a name for the module
instance. The module type specifier provides the name of the instantiating module and
31
also a list of actual parameters, which are assigned to the formal parameters of the module. An
actual parameter can be any legal next expression (see Section 2.2.4 [Simple and Next
Expressions], page 21). It is an error if the number of actual parameters is different from the
number of formal parameters. Whenever formal parameters occur in expressions within the
module, they are replaced by the actual parameters. The semantic of module instantiation is
similar to call-by-reference.8
Here are examples:
MODULE main
...
VAR
a : boolean;
b : foo(a);
...
MODULE foo(x)
ASSIGN
x := TRUE;
the variable a is assigned the value TRUE. This distinguishes the call-by-reference mechanism
from a call-by-value scheme.
Now consider the following program:
MODULE main
...
DEFINE
a := 0;
VAR
b : bar(a);
...
MODULE bar(x)
DEFINE
a := 1;
y := x;
In this program, the value of y is 0. On the other hand, using a call-by-name mechanism, the
value of y would be 1, since a would be substituted as an expression for x.
Forward references to module names are allowed, but circular references are not, and result in
an error.
The keyword process is explained in Section 2.3.13 [Processes], page 34.
2.3.12 References to Module Components (Variables and Defines)
As described in Section 2.2.3 [Variables and Defines], page 13, defines and variables can
be referenced in expressions as variable identifiers and define identifiers
respectively, both of which are complex identifiers. The syntax of a complex
identifier is:
complex_identifier ::
identifier
| complex_identifier . identifier
| complex_identifier [ simple_expression ]
| self
8This also means that the actual parameters are analyzed in the context of the variable declaration where
the module is instantiated, not in the context of the expression where the formal parameter occurs.
32
Every variable and define used in an expression should be declared. It is possible to have
forward references when a variable or define identifier is used textually before the corresponding
declaration.
Notations with . (<DOT>) are used to access the components of modules. For example, if m
is an instance of a module (see Section 2.3.11 [MODULE Instantiations], page 31 for information
about instances of modules) then the expression m.c identifies the component c of the module
instance m. This is precisely analogous to accessing a component of a structured data type.
Note that actual parameters of a module can potentially be instances of other modules.
Therefore, parameters of modules allow access to the components of other module instances,
as in the following example:
MODULE main
... VAR
a : bar;
m : foo(a);
...
MODULE bar
VAR
q : boolean;
p : boolean;
MODULE foo(c)
DEFINE
flag := c.q | c.p;
Here, the value of ‘m.flag’ is the logical OR of ‘a.p’ and ‘a.q’.
Individual elements of an array are accessed in the typical fashion with the index given in
square brackets. See 2.2.3 for more information.
It is possible to refer to the name that the current module has been instantiated to by using
the self built-in identifier.
MODULE container(init_value1, init_value2)
VAR c1 : counter(init_value1, self);
VAR c2 : counter(init_value2, self);
MODULE counter(init_value, my_container)
VAR v: 1..100;
ASSIGN
init(v) := init_value;
DEFINE
greatestCounterInContainer := v >= my_container.c1.v &
v >= my_container.c2.v;
MODULE main
VAR c : container(14, 7);
SPEC
c.c1.greatestCounterInContainer;
In this example an instance of the module container is passed to the sub-module counter.
In the main module, c is declared to be an instance of the module container, which declares
two instances of the module counter. Every instance of the counter module has a
define greatestCounterInContainer which specifies the condition when this particular
counter has the greatest value in the container it belongs to. So a counter needs access to
the parent container to access all the counters in the container.
33
2.3.13 Processes
Important!
Since NUSMV version 2.5.0 processes are deprecated. In future versions of NUSMV processes
may be no longer supported, and only synchronous FSM will be supported by the input language.
Modeling of asynchronous processes will have to be resolved at higher level.
Processes are used to model interleaving concurrency. A process is a module which is instantiated
using the keyword ‘process’ (see Section 2.3.11 [MODULE Instantiations], page 31).
The program executes a step by non-deterministically choosing a process, then executing all of
the assignment statements in that process in parallel. It is implicit that if a given variable is not
assigned by the process, then its value remains unchanged. Note that only assignments of the
form
ASSIGN next(var_name) := ... ;
are influenced by processes. All other kinds of assignments and all constraints (such as TRANS,
INVAR, etc) are always in force, independent of which process is selected for execution.
Each instance of a process has a special boolean variable associated with it, called
running. The value of this variable is TRUE if and only if the process instance is currently
selected for execution. No two processes may be running at the same time.
Note that (only) in the presence of processes NuSMV internally declares special variables
running and process selector . These names should NOT be used in user’s own declarations
(when processes are used), but they can be referenced for example in the transition
relation of a module.
Furthermore, if the user declares N processes, there will be N+1 processes allocated, as the
module main has always its own process associated. In the following example there are three
process, p1, p2 and main:
MODULE my_module
-- my module definition...
MODULE main
VAR
p1 : process my_module;
p2 : process my_module;
2.3.14 A Program and the main Module
The syntax of a NUSMV program is:
program :: module_list
module_list ::
module
| module_list module
There must be one module with the name main and no formal parameters. The module main
is the one evaluated by the interpreter.
2.3.15 Namespaces and Constraints on Declarations
Identifiers in the NUSMV input language may reference five different entities: modules, variables,
defines, module instances, and symbolic constants.
34
Module identifiers have their own separate namespace. Module identifiers can be used in
module type specifiers only, and no other kind of identifiers can be used there (see
Section 2.3.11 [MODULE Instantiations], page 31). Thus, module identifiers may be equal to
other kinds of identifiers without making the program ambiguous. However, no two modules
should be declared with the same identifier. Modules cannot be declared in other modules,
therefore they are always referenced by simple identifiers.
Variable, define, and module instance identifiers are introduced in a program when the module
containing their declarations is instantiated. Inside this module the variables, defines and
module instances may be referenced by the simple identifiers. Inside other modules, their
simple identifiers should be preceded by the identifier of the module instance containing their
declaration and . (<DOT>). Such identifiers are called complex identifier. The full
identifier is a complex identifier which references a variable, define, or a module instance
from inside the main module.
Let us consider the following:
MODULE main
VAR a : boolean;
VAR b : foo;
VAR c : moo;
MODULE foo
VAR q : boolean;
e : moo;
MODULE moo
DEFINE f := 0 < 1;
MODULE not_used
VAR n : boolean;
VAR t : used;
MODULE used
VAR k : boolean;
The full identifier of the variable a is a, the full identifier of the variable q (from the module
foo) is b.q, the full identifier of the module instance e (from the module foo) is b.e, the
full identifiers of the define f (from the module moo) are b.e.f and c.f, because two module
instances contain this define. Notice that, the variables n and k as well as the module instance
t do not have full identifiers because they cannot be accessed from main (since the module
not used is not instantiated).
In the NUSMV language, variable, define, and module instances belong to one namespace,
and no two full identifiers of different variable, define, or module instances should be equal.
Also, none of them can be redefined.
A symbolic constant can be introduced by a variable declaration if its type specifier
enumerates the symbolic constant. For example, the variable declaration
VAR a : {OK, FAIL, waiting};
declares the variable a as well as the symbolic constants OK, FAIL and waiting. The
full identifiers of the symbolic constants are equal to their simple identifiers with
the additional condition – the variable whose declaration declares the symbolic constants
also has a full identifier.
Symbolic constants have a separate namespace, so their identifiers may potentially
be equal, for example, variable identifiers. It is an error, if the same identifier in an expression
can simultaneously refer to a symbolic constant and a variable or a define. A symbolic
constant may be declared an arbitrary number of times, but it must be declared at least once,
if it is used in an expression.
35
2.3.16 Context
Every module instance has its own context, in which all expressions are analyzed. The context
can be defined as the full identifiers of variables declared in the module without their simple
identifiers. Let us consider the following example:
MODULE main
VAR a : foo;
VAR b : moo;
MODULE foo
VAR c : moo;
MODULE moo
VAR d : boolean;
The context of the module main is ‘’ (empty)9
, the context of the module instance a (and inside
the module foo) is ‘a.’, the contexts of module moo may be ‘b.’ (if the module instance b
is analyzed) and ‘a.c.’ (if the module instance a.c is analyzed).
2.3.17 ISA Declarations
There are cases in which some parts of a module could be shared among different modules, or
could be used as a module themselves. In NUSMV it is possible to declare the common parts as
separate modules, and then use the ISA declaration to import the common parts inside a module
declaration. The syntax of an isa declaration is as follows:
isa_declaration :: ISA identifier
where identifier must be the name of a declared module. The ISA declaration can be
thought as a simple macro expansion command, because the body of the module referenced by
an ISA command is replaced to the ISA declaration.
Warning: ISA is a deprecated feature and will be removed from future versions of
NUSMV. Therefore, avoid the use of ISA declarations. Use module instances instead.
2.4 Specifications
The specifications to be checked on the FSM can be expressed in temporal logics like Computation
Tree Logic CTL, Linear Temporal Logic LTL extended with Past Operators, and Property
Specification Language (PSL) [psl03] that includes CTL and LTL with Sequencial Extended
Regular Expressions (SERE), a variant of classical regular expressions. It is also possible to analyze
quantitative characteristics of the FSM by specifying real-time CTL specifications. Specifications
can be positioned within modules, in which case they are preprocessed to rename the
variables according to their context.
CTL and LTL specifications are evaluated by NUSMV in order to determine their truth or
falsity in the FSM. When a specification is discovered to be false, NUSMV constructs and prints
a counterexample, i.e. a trace of the FSM that falsifies the property.
2.4.1 CTL Specifications
A CTL specification is given as a formula in the temporal logic CTL, introduced by the keyword
‘CTLSPEC’ (however, deprecated keyword ‘SPEC’ can be used instead.) The syntax of this
specification is:
9 The module main is instantiated with the so called empty identifier which cannot be referenced in a
program.
36
ctl_specification :: CTLSPEC ctl_expr [;]
| SPEC ctl_expr [;]
| CTLSPEC NAME name := ctl_expr [;]
| SPEC NAME name := ctl_expr [;]
The syntax of CTL formulas recognized by NUSMV is as follows:
ctl_expr ::
simple_expr -- a simple boolean expression
| ( ctl_expr )
| ! ctl_expr -- logical not
| ctl_expr & ctl_expr -- logical and
| ctl_expr | ctl_expr -- logical or
| ctl_expr xor ctl_expr -- logical exclusive or
| ctl_expr xnor ctl_expr -- logical NOT exclusive or
| ctl_expr -> ctl_expr -- logical implies
| ctl_expr <-> ctl_expr -- logical equivalence
| EG ctl_expr -- exists globally
| EX ctl_expr -- exists next state
| EF ctl_expr -- exists finally
| AG ctl_expr -- forall globally
| AX ctl_expr -- forall next state
| AF ctl_expr -- forall finally
| E [ ctl_expr U ctl_expr ] -- exists until
| A [ ctl_expr U ctl_expr ] -- forall until
Since simple expr cannot contain the next operator, ctl expr cannot contain it either.
The ctl expr should also be a boolean expression.
Intuitively the semantics of CTL operators is as follows:
• EX p is true in a state s if there exists a state s such that a transition goes from s to s
and p is true in s .
• AX p is true in a state s if for all states s where there is a transition from s to s , p is true
in s .
• EF p is true in a state s0 if there exists a series of transitions s0 → s1, s1 → s2, ...,
sn−1 → sn such that p is true in sn.
• AF p is true in a state s0 if for all series of transitions s0 → s1, s1 → s2, ..., sn−1 → sn
p is true in sn.
• EG p is true in a state s0 if there exists an infinite series of transitions s0 → s1, s1 → s2,
... such that p is true in every si.
• AG p is true in a state s0 if for all infinite series of transitions s0 → s1, s1 → s2, ... p
is true in every si.
• E[p U q] is true in a state s0 if there exists a series of transitions s0 → s1, s1 → s2,
..., sn−1 → sn such that p is true in every state from s0 to sn−1 and q is true in state sn.
• A[p U q] is true in a state s0 if for all series of transitions s0 → s1, s1 → s2, ...,
sn−1 → sn p is true in every state from s0 to sn−1 and q is true in state sn.
A CTL formula is true if it is true in all initial states.
For a detailed description about the semantics of PSL operators, please see [psl03].
37
2.4.2 Invariant Specifications
It is also possible to specify invariant specifications with special constructs. Invariants are propositional
formulas which must hold invariantly in the model. The corresponding command is
INVARSPEC, with syntax:
invar_specification :: INVARSPEC next_expr ;
INVARSPEC NAME name := next_expr [;]
This statement is intuitively equivalent to
SPEC AG simple_expr ;
but can be checked by a specialised algorithm during reachability analysis and Invariant Specifications
can contain next operators. Fairness constraints are not taken into account during
invariant checking.
2.4.3 LTL Specifications
LTL specifications are introduced by the keyword LTLSPEC. The syntax of this specification is:
ltl_specification :: LTLSPEC ltl_expr [;]
LTLSPEC NAME name := ltl_expr [;]
The syntax of LTL formulas recognized by NUSMV is as follows:
ltl_expr ::
next_expr -- a next boolean expression
| ( ltl_expr )
| ! ltl_expr -- logical not
| ltl_expr & ltl_expr -- logical and
| ltl_expr | ltl_expr -- logical or
| ltl_expr xor ltl_expr -- logical exclusive or
| ltl_expr xnor ltl_expr -- logical NOT exclusive or
| ltl_expr -> ltl_expr -- logical implies
| ltl_expr <-> ltl_expr -- logical equivalence
-- FUTURE
| X ltl_expr -- next state
| G ltl_expr -- globally
| G bound ltl_expr -- bounded globally
| F ltl_expr -- finally
| F bound ltl_expr -- bounded finally
| ltl_expr U ltl_expr -- until
| ltl_expr V ltl_expr -- releases
-- PAST
| Y ltl_expr -- previous state
| Z ltl_expr -- not previous state not
| H ltl_expr -- historically
| H bound ltl_expr -- bounded historically
| O ltl_expr -- once
| O bound ltl_expr -- bounded once
| ltl_expr S ltl_expr -- since
| ltl_expr T ltl_expr -- triggered
bound :: [ integer_number , integer_number ]
Intuitively the semantics of LTL operators is as follows:
38
• X p is true at time t if p is true at time t + 1.
• F p is true at time t if p is true at some time t ≥ t.
• F [l,u] p is true at time t if p is true at some time t + l ≤ t ≤ t + u.
• G p is true at time t if p is true at all times t ≥ t.
• G [l,u] p is true at time t if p is true at all times t + l ≤ t ≤ t + u.
• p U q is true at time t if q is true at some time t ≥ t, and for all time t (such that
t ≤ t < t ) p is true.
• p V q is true at time t if q holds at all time steps t ≥ t up to and including the time step
t where p also holds. Alternatively, it may be the case that p never holds in which case
q must hold in all time steps t ≥ t.
• Y p is true at time t > t0 if p holds at time t − 1. Y p is false at time t0.
• Z p is equivalent to Y p with the exception that the expression is true at time t0.
• H p is true at time t if p holds in all previous time steps t ≤ t.
• H [l,u] p is true at time t if p holds in all previous time steps t − u ≤ t ≤ t − l.
• O p is true at time t if p held in at least one of the previous time steps t ≤ t.
• O [l,u] p is true at time t if p held in at least one of the previous time steps t − u ≤
t ≤ t − l.
• p S q is true at time t if q held at time t ≤ t and p holds in all time steps t such that
t < t ≤ t.
• p T q is true at time t if p held at time t ≤ t and q holds in all time steps t such that
t ≤ t ≤ t. Alternatively, if p has never been true, then q must hold in all time steps t
such that t0 ≤ t ≤ t
An LTL formula is true if it is true at the initial time t0.
In NUSMV, LTL specifications can be analyzed both by means of BDD-based reasoning, or
by means of SAT-based bounded model checking. In the case of BDD-based reasoning, NUSMV
proceeds according to [CGH97]. For each LTL specification, a tableau of the behaviors falsifying
the property is constructed, and then synchronously composed with the model. With respect to
[CGH97], the approach is fully integrated within NUSMV, and allows full treatment of past
temporal operators. Note that the counterexample is generated in such a way to show that the
falsity of a LTL specification may contain state variables which have been introduced by the
tableau construction procedure.
In the case of SAT-based reasoning, a similar tableau construction is carried out to encode the
paths of limited length, violating the property. NUSMV generates a propositional satisfiability
problem, that is then tackled by means of an efficient SAT solver [BCCZ99].
In both cases, the tableau constructions are completely transparent to the user.
Important Difference Between BDD and SAT Based LTL Model Checking
If a FSM to be checked it not total (i.e. has deadlock state) the model checking may return
different results for the same LTL specification depending on the verification engine used. For
example, for below model:
MODULE main
VAR s : boolean;
TRANS s = TRUE
LTLSPEC G (s = TRUE)
the LTL specification is proved valid by BDD-based model checking but is violated by SATbased
bounded model checking. The counter-example found consists of one state s=FALSE.
39
This difference between the results is caused by the fact that BDD model checking investigates
only infinite paths whereas SAT-based model checking is able to deal also with finite paths.
Apparently infinite paths cannot ever have s=FALSE as then the transition relation will not hold
between the consecutive states in the path. A finite path consisting of just one state s=FALSE
violates the specification G (s = TRUE) and is still consistent with the FSM as the transition
relation is not taken ever and there is not initial condition to violate. Note however that this state
is a deadlock and cannot have consecutive states.
In order to make SAT-based bound model checking ignore finite paths it is enough to add a
fairness condition to the main module:
JUSTICE TRUE;
Being limited to fair paths, SAT-based bounded model checking cannot find a finite counterexample
and results of model checking become consistent with BDD-based model checking.
2.4.4 Real Time CTL Specifications and Computations
NUSMV allows for Real Time CTL specifications [EMSS91]. NUSMV assumes that each
transition takes unit time for execution. RTCTL extends the syntax of CTL path expressions
with the following bounded modalities:
rtctl_expr ::
ctl_expr
| EBF range rtctl_expr
| ABF range rtctl_expr
| EBG range rtctl_expr
| ABG range rtctl_expr
| A [ rtctl_expr BU range rtctl_expr ]
| E [ rtctl_expr BU range rtctl_expr ]
range :: integer_number .. integer_number
Given ranges must be non-negative.
Intuitively, the semantics of the RTCTL operators is as follows:
• EBF m..n p requires that there exists a path starting from a state, such that property p
holds in a future time instant i, with m ≤ i ≤ n
• ABF m..n p requires that for all paths starting from a state, property p holds in a future
time instant i, with m ≤ i ≤ n
• EBG m..n p requires that there exists a path starting from a state, such that property p
holds in all future time instants i, with m ≤ i ≤ n
• ABG m..n p requires that for all paths starting from a state, property p holds in all
future time instants i, with m ≤ i ≤ n
• E [ p BU m..n q ] requires that there exists a path starting from a state, such that
property q holds in a future time instant i, with m ≤ i ≤ n, and property p holds in all
future time instants j, with m ≤ j < i
• A [ p BU m..n q ], requires that for all paths starting from a state, property q holds
in a future time instant i, with m ≤ i ≤ n, and property p holds in all future time instants
j, with m ≤ j < i
Real time CTL specifications can be defined with the following syntax, which extends the syntax
for CTL specifications. (keyword ‘SPEC’ is deprecated)
rtctl_specification :: CTLSPEC rtctl_expr [;]
| SPEC rtctl_expr [;]
| CTLSPEC NAME name := rtctl_expr [;]
| SPEC NAME name := rtctl_expr [;]
40
With the COMPUTE statement, it is also possible to compute quantitative information on the
FSM. In particular, it is possible to compute the exact bound on the delay between two specified
events, expressed as CTL formulas. The syntax is the following:
compute_specification :: COMPUTE compute_expr [;]
COMPUTE NAME name := compute_expr [;]
where
compute_expr :: MIN [ rtctl_expr , rtctl_expr ]
| MAX [ rtctl_expr , rtctl_expr ]
MIN [start , final] returns the length of the shortest path from a state in start to a state
in final. For this, the set of states reachable from start is computed. If at any point, we encounter
a state satisfying final, we return the number of steps taken to reach the state. If a fixed point is
reached and no computed states intersect final then infinity is returned.
MAX [start , final] returns the length of the longest path from a state in start to a state
in final. If there exists an infinite path beginning in a state in start that never reaches a state
in final, then infinity is returned. If any of the initial or final states is empty, then undefined is
returned.
It is important to remark here that if the FSM is not total (i.e. it contains deadlock states)
COMPUTE may produce wrong results. It is possible to check the FSM against deadlock states
by calling the command check fsm.
2.4.5 PSL Specifications
NUSMV allows for PSL specifications as from version 1.01 of PSL Language Reference Manual
[psl03]. PSL specifications are introduced by the keyword “PSLSPEC”. The syntax of this
declaration (as from the PSL parsers distributed by IBM, [PSL]) is:
pslspec_declaration :: PSLSPEC psl_expr [;]
PSLSPEC NAME name := psl_expr [;]
where
psl_expr ::
psl_primary_expr
| psl_unary_expr
| psl_binary_expr
| psl_conditional_expr
| psl_case_expr
| psl_property
The first five classes define the building blocks for psl property and provide means of combining
instances of that class; they are defined as follows:
psl_primary_expr ::
number ;; a numeric constant
| boolean ;; a boolean constant
| word ;; a word constant
| var_id ;; a variable identifier
| { psl_expr , ... , psl_expr }
| { psl_expr "{" psl_expr , ... , "psl_expr" }}
| ( psl_expr )
psl_unary_expr ::
+ psl_primary_expr
41
| - psl_primary_expr
| ! psl_primary_expr
| bool ( psl_expr )
| word1 ( psl_expr )
| uwconst ( psl_expr, psl_expr )
| swconst ( psl_expr, psl_expr )
| sizeof ( psl_expr )
| toint ( psl_expr )
| signed ( psl_expr )
| unsigned ( psl_expr )
| extend ( psl_expr, psl_primary_expr )
| resize ( psl_expr, psl_primary_expr )
| select ( psl_expr, psl_expr, psl_expr )
psl_binary_expr ::
psl_expr + psl_expr
| psl_expr union psl_expr
| psl_expr in psl_expr
| psl_expr - psl_expr
| psl_expr * psl_expr
| psl_expr / psl_expr
| psl_expr % psl_expr
| psl_expr == psl_expr
| psl_expr != psl_expr
| psl_expr < psl_expr
| psl_expr <= psl_expr
| psl_expr > psl_expr
| psl_expr >= psl_expr
| psl_expr & psl_expr
| psl_expr | psl_expr
| psl_expr xor psl_expr
| psl_expr xnor psl_expr
| psl_expr << psl_expr
| psl_expr >> psl_expr
| psl_expr :: psl_expr
psl_conditional_expr ::
psl_expr ? psl_expr : psl_expr
psl_case_expr ::
case
psl_expr : psl_expr ;
...
psl_expr : psl_expr ;
endcase
Among the subclasses of psl expr we depict the class psl bexpr that will be used in the
following to identify purely boolean, i.e. not temporal, expressions. The class of PSL properties
psl property is defined as follows:
psl_property ::
replicator psl_expr ;; a replicated property
| FL_property abort psl_bexpr
| psl_expr <-> psl_expr
| psl_expr -> psl_expr
| FL_property
| OBE_property
42
replicator ::
forall var_id [index_range] in value_set :
index_range ::
[ range ]
range ::
low_bound : high_bound
low_bound ::
number
| identifier
high_bound ::
number
| identifier
| inf ;; inifite high bound
value_set ::
{ value_range , ... , value_range }
| boolean
value_range ::
psl_expr
| range
The instances of FL property are temporal properties built using LTL operators and SEREs
operators, and are defined as follows:
FL_property ::
;; PRIMITIVE LTL OPERATORS
X FL_property
| X! FL_property
| F FL_property
| G FL_property
| [ FL_property U FL_property ]
| [ FL_property W FL_property ]
;; SIMPLE TEMPORAL OPERATORS
| always FL_property
| never FL_property
| next FL_property
| next! FL_property
| eventually! FL_property
| FL_property until! FL_property
| FL_property until FL_property
| FL_property until!_ FL_property
| FL_property until_ FL_property
| FL_property before! FL_property
| FL_property before FL_property
| FL_property before!_ FL_property
| FL_property before_ FL_property
;; EXTENDED NEXT OPERATORS
| X [number] ( FL_property )
| X! [number] ( FL_property )
| next [number] ( FL_property )
| next! [number] ( FL_property )
;;
| next_a [range] ( FL_property )
| next_a! [range] ( FL_property )
| next_e [range] ( FL_property )
| next_e! [range] ( FL_property )
43
;;
| next_event! ( psl_bexpr ) ( FL_property )
| next_event ( psl_bexpr ) ( FL_property )
| next_event! ( psl_bexpr ) [ number ] ( FL_property )
| next_event ( psl_bexpr ) [ number ] ( FL_property )
;;
| next_event_a! ( psl_bexpr ) [psl_expr] ( FL_property )
| next_event_a ( psl_bexpr ) [psl_expr] ( FL_property )
| next_event_e! ( psl_bexpr ) [psl_expr] ( FL_property )
| next_event_e ( psl_bexpr ) [psl_expr] ( FL_property )
;; OPERATORS ON SEREs
| sequence ( FL_property )
| sequence |-> sequence [!]
| sequence |=> sequence [!]
;;
| always sequence
| G sequence
| never sequence
| eventually! sequence
;;
| within! ( sequence_or_psl_bexpr , psl_bexpr ) sequence
| within ( sequence_or_psl_bexpr , psl_bexpr ) sequence
| within!_ ( sequence_or_psl_bexpr , psl_bexpr ) sequence
| within_ ( sequence_or_psl_bexpr , psl_bexpr ) sequence
;;
| whilenot! ( psl_bexpr ) sequence
| whilenot ( psl_bexpr ) sequence
| whilenot!_ ( psl_bexpr ) sequence
| whilenot_ ( psl_bexpr ) sequence
sequence_or_psl_bexpr ::
sequence
| psl_bexpr
Please note that instances of FL property cannot be combined with the “=”, “!=” and “==”.
Sequences, i.e. istances of class sequence, are defined as follows:
sequence ::
{ SERE }
SERE ::
sequence
| psl_bexpr
;; COMPOSITION OPERATORS
| SERE ; SERE
| SERE : SERE
| SERE & SERE
| SERE && SERE
| SERE | SERE
;; RegExp QUALIFIERS
| SERE [* [count] ]
| [* [count] ]
| SERE [+]
| [+]
;;
| psl_bexpr [= count ]
| psl_bexpr [-> count ]
44
count ::
number
| range
Istances of OBE property are CTL properties in the PSL style and are defined as follows:
OBE_property ::
AX OBE_property
| AG OBE_property
| AF OBE_property
| A [ OBE_property U OBE_property ]
| EX OBE_property
| EG OBE_property
| EF OBE_property
| E [ OBE_property U OBE_property ]
The NUSMV parser allows to input any specification based on the grammar above, but currently,
verification of PSL specifications is supported only for the OBE subset, and for a subset of PSL
for which it is possible to define a translation into LTL. For the specifications that belong to these
subsets, it is possible to apply all the verification techniques that can be applied to LTL and CTL
Specifications.
2.5 Variable Order Input
It is possible to specify the order in which variables should appear in the BDD’s generated by
NUSMV. The file which gives the desired order can be read in using the -i option in batch
mode or by setting the input order file environment variable in interactive mode. 10
2.5.1 Input File Syntax
The syntax for input files describing the desired variable ordering is as follows, where the file
can be considered as a list of variable names, each of which must be on a separate line:
vars_list :: EMPTY
| var_list_item vars_list
var_list_item :: complex_identifier
| complex_identifier . integer_number
Where EMPTY means parsing nothing.
This grammar allows for parsing a list of variable names of the following forms:
Complete_Var_Name -- to specify an ordinary variable
Complete_Var_Name[index] -- to specify an array variable element
Complete_Var_Name.NUMBER -- to specify a specific bit of a
-- scalar variable
where Complete Var Name is just the name of the variable if it appears in the module MAIN,
otherwise it has the module name(s) prepended to the start, for example:
mod1.mod2...modN.varname
10Note that if the ordering is not provided by a user then NUSMV decides by itself how to order the variables.
Two shell variables bdd static order heuristics (see page 53) and vars order type
(see page 52) allow to control the ordering creation.
45
where varname is a variable in modN, and modN.varname is a variable in modN-1, and
so on. Note that the module name main is implicitely prepended to every variable name and
therefore must not be included in their declarations.
Any variable which appears in the model file, but not the ordering file is placed after all the others
in the ordering. Variables which appear in the ordering file but not the model file are ignored. In
both cases NUSMV displays a warning message stating these actions.
Comments can be included by using the same syntax as regular NUSMV files. That is, by
starting the line with -- or by entering text between limiters /-- and --/.
2.5.2 Scalar Variables
A variable, which has a finite range of values that it can take, is encoded as a set of boolean
variables (i.e. bits). These boolean variables represent the binary equivalents of all the possible
values for the scalar variable. Thus, a scalar variable that can take values from 0 to 7 would
require three boolean variables to represent it.
It is possible not only to declare the position of a scalar variable in the ordering file, but each
of the boolean variables which represent it.
If only the scalar variable itself is named then all the boolean variables which are actually used
to encode it are grouped together in the BDD package.
Variables which are grouped together will always remain next to each other in the BDD package
and in the same order. When dynamic variable re-ordering is carried out, the group of variables
are treated as one entity and moved as such.
If a scalar variable is omitted from the ordering file then it will be added at the end of the variable
order and the specific-bit variables that represent it will be grouped together. However, if any
specific-bit variables have been declared in the ordering file (see below) then these will not be
grouped with the remaining ones.
It is also possible to specify the location of specific bit variables anywhere in the ordering. This
is achieved by first specifying the scalar variable name in the desired location, then simply specifying
Complete Var Name.i at the position where you want that bit variable to appear:
...
Complete Var Name
...
Complete Var Name.i
...
The result of doing this is that the variable representing the ith
bit is located in a different position
to the remainder of the variables representing the rest of the bits. The specific-bit variables
varname.0, ..., varname.i-1, varname.i+1, ..., varname.N are grouped together as before.
If any one bit occurs before the variable it belongs to, the remaining specific-bit variables
are not grouped together:
...
Complete Var Name.i
...
Complete Var Name
...
The variable representing the ith
bit is located at the position given in the variable ordering and
the remainder are located where the scalar variable name is declared. In this case, the remaining
bit variables will not be grouped together.
This is just a short-hand way of writing each individual specific-bit variable in the ordering file.
The following are equivalent:
46
... ...
Complete Var Name.0 Complete Var Name.0
Complete Var Name.1 Complete Var Name
... ...
Complete Var Name.N-1
...
where the scalar variable Complete Var Name requires N boolean variables to encode all the
possible values that it may take. It is still possible to then specify other specific-bit variables at
later points in the ordering file as before.
2.5.3 Array Variables
When declaring array variables in the ordering file, each individual element must be specified
separately. It is not permitted to specify just the name of the array. The reason for this is that
the actual definition of an array in the model file is essentially a shorthand method of defining a
list of variables that all have the same type. Nothing is gained by declaring it as an array over
declaring each of the elements individually, and there is no difference in terms of the internal
representation of the variables.
2.6 Clusters Ordering
When NUSMV builds a clusterized BDD-based FSM during model construction, an initial simple
clusters list is roughly constructed by iterating through a list of variables, and by constructing
the clusters by picking the transition relation associated to each variable in the list. Later, the
clusters list will be refined and improved by applying the clustering alghorithm that the user
previoulsy selected (see partitioning methods at page 3.1 for further information).
In [WJKWLvdBR06], Wendy Johnston and others from University of Queensland, showed
that choosing a good ordering for the initial list of variables that is used to build the clusters
list may lead to a dramatic improvement of performances. They did experiments in a modified
version of NUSMV, by allowing the user to specify a variable ordering to be used when constructing
the initial clusters list. The prototype code has been included in version 2.4.1, that
offers the new option trans order file to specify a file containing a variable ordering (see
at page 53 for further information).
Grammar of the clusters ordering file is the same of variable ordering file presented in section
2.5 at page 45.
47
Chapter 3
Running NuSMV interactively
The main interaction mode of NUSMV is through an interactive shell. In this mode NUSMV
enters a read-eval-print loop. The user can activate the various NUSMV computation steps
as system commands with different options. These steps can therefore be invoked separately,
possibly undone or repeated under different modalities. These steps include the construction
of the model under different partitioning techniques, model checking of specifications, and the
configuration of the BDD package. The interactive shell of NUSMV is activated from the system
prompt as follows (’NuSMV>’ is the default NUSMV shell prompt):
system prompt> NuSMV -int <RET>
NuSMV>
When running interactively, NUSMV first tries to read and execute commands from an
initialization file if such file can be found and is readable unless -s is passed on the command
line.
First, file master.nusmvrc is looked for in directory defined in environment variable
NUSMV LIBRARY PATH or in default library path if no such variable is defined. If no such
file exists, file .nusmvrc is looked for in user’s home directory and as a last attemp, .nusmvrc is
looked for in current directory. Commands in the initialization file (if any) are executed consecutively.
When initialization phase is completed the NUSMV shell is displayed and the system is
now ready to execute user commands.
A NUSMV command is a sequence of words. The first word specifies the command to be
executed. The remaining words are arguments to the invoked command. Commands separated
by a ‘;’ are executed sequentially; the NUSMV shell waits for each command to terminate
in turn. The behavior of commands can depend on environment variables, similar to “csh”
environment variables.
It is also possible to make NUSMV read and execute a sequence of commands from a file,
through the command line option -source:
system prompt> NuSMV -source cmd file <RET>
-source cmd-file Starts the interactive shell and then executes NUSMV commands
from file cmd-file. If an error occurs during a command
execution, commands that follow will not be executed.
See also the variable on failure script quits.
The option -source implies -int.
48
In the following we present the possible commands followed by the related environment variables,
classified in different categories. Every command answers to the option -h by printing out
the command usage. When output is paged for some commands (option -m), it is piped through
the program specified by the UNIX PAGER shell variable, if defined, or through the UNIX command
“more”. Environment variables can be assigned a value with the “set” command. Command
sequences to NUSMV must obey the (partial) order specified in the Figure 3.11 depicted
at page 113. For instance, it is not possible to evaluate CTL expressions before the model is
built.
A number of commands and environment variables, like those dealing with file names,
accept arbitrary strings. There are a few reserved characters which must be escaped if they are
to be used literally in such situations. See the section describing the history command, on
page 106, for more information.
The verbosity of NUSMV is controlled by the following environment variable.
verbose level Environment Variable
Controls the verbosity of the system. Possible values are integers from 0 (no messages) to
4 (full messages). The default value is 0.
3.1 Model Reading and Building
The following commands allow for the parsing and compilation of the model into a BDD.
read model - Reads a NuSMV file into NuSMV. Command
read model [-h] [-i model-file]
Reads a NuSMV 2.6 file. If the -i option is not specified, it reads from the file specified
in the environment variable input file.
Command Options:
-i model-file Sets the environment variable input file to
model-file, and reads the model from the specified file.
input file Environment Variable
Stores the name of the input file containing the model. It can be set by the “set” command
or by the command line option ‘-i’. There is no default value.
pp list Environment Variable
Stores the list of pre-processors to be run on the input file before it is parsed by NUSMV.
The pre-processors are executed in the order specified by this variable. The argument must
either be the empty string (specifying that no pre-processors are to be run on the input
file), one single pre-processor name or a space seperated list of pre-processor names inside
double quotes. Any invalid names are ignored. The default is none.
flatten hierarchy - Flattens the hierarchy of modules Command
flatten hierarchy [-h] [-d]
49
This command is responsible of the instantiation of modules and processes. The instantiation
is performed by substituting the actual parameters for the formal parameters, and then
by prefixing the result via the instance name.
Command Options:
-d Delays the construction of vars constraints until needed
disable syntactic checks Environment Variable
Enables or disables the syntactic checks that are performed by the “flatten hierarchy” command.
Warning: If the model is not well-formed, NUSMV may result in unpredictable
results, use this option at your own risk.
keep single value vars Environment Variable
Enables or disables the conversion of variables that can assume only one single possible
value into constant DEFINEs.
backward compatibility Environment Variable
It is used to enable or disable type checking and other features provided by NuSMV 2.6.
If set to 1 then the type checking is turned off, and NUSMV behaves as the old versions
w.r.t. type checking and other features like writing of flattened and booleanized SMV
files and promotion of boolean constants to their integer counterpart. If set to 0 then the
type checking is turned on, and whenever a type error is encountered while compiling a
NUSMV program the user is informed and the execution stopped.
Since NUSMV 2.5.1, backward compatibility mode introduces a porting feature from old
models which use constant 1 as case conditions, instead of forcing the use of TRUE.
The option by default it set to 0.
type checking warning on Environment Variable
Enables notification of warning messages generated by the type checking. If set to 0, then
messages are disregarded, otherwise if set to 1 they are notified to the user. As default it
set to 1.
show vars - Shows model’s symbolic variables and defines with
their types
Command
show vars [-h] [-s] [-f] [-i] [-t | -V | -D] [-v] [-m | -o
output-file]
Prints a summary of the variables and defines declared in the input file. Moreover, it prints
also the list of symbolic input, frozen and state variables of the model with their range of
values (as defined in the input file) if the proper command option is specified.
By default, if no type specifiers (-s, -f, -i) are used, all variable types will be printed.
When using one or more type specifiers (e.g. -s), only variables belonging to selected
types will be printed.
Command Options:
-s Prints only state variables.
50
-f Prints only frozen variables.
-i Prints only input variables.
-t Prints only the number of variables (among selected kinds),
grouped by type. This option is incompatible with -V or -D
-V Prints only the list of variables with their types (among selected
kinds), with no summary information. This option is
incompatible with -t or -D
-D Prints only the list of defines with their types, with no summary
information. This option is incompatible with -t or
-V
-v Prints verbosely. Scalar variable’s values are not truncated
if too long for printing.
-m Pipes the output to the program specified by the PAGER
shell variable if defined, else through the UNIX command
“more”.
-o output-file Writes the output generated by the command to
output-file.
show dependencies - Shows the dependencies for the given expres-
sion
Command
show dependencies [-h] [-k bound] -e expression
Prints the set of variables that are in the dependency set of the given expression. If the
bound is specified using the -k argument, then the computation of the dependencies is
done until the bound has been reached. If not specified, the computation is performed until
no new dependencies are found.
Command Options:
-h Shows the command usage
-k bound Sets the bound limit for the dependencies computation
-e expr The expression on which the dependencies are computed
encode variables - Builds the BDD variables necessary to compile
the model into a BDD.
Command
encode variables [-h] [-i order-file]
Generates the boolean BDD variables and the ADD needed to encode propositionally the
(symbolic) variables declared in the model. The variables are created as default in the
order in which they appear in a depth first traversal of the hierarchy.
The input order file can be partial and can contain variables not declared in the model.
Variables not declared in the model are simply discarded. Variables declared in the model
which are not listed in the ordering input file will be created and appended at the end of
the given ordering list, according to the default ordering.
Command Options:
-i order-file Sets the environment variable input order file to
order-file, and reads the variable ordering to be used
from file order-file. This can be combined with the
write order command. The variable ordering is written
to a file, which can be inspected and reordered by the user,
and then read back in.
51
input order file Environment Variable
Indicates the file name containing the variable ordering to be used in building the model
by the ‘encode variables’ command. A value for this variable can also be provided
with command line option -i. There is no default value.
write order dumps bits Environment Variable
Changes the behaviour of the command write order.
When this variable is set, write order will dump the bits constituting the boolean encoding
of each scalar variable, instead of the scalar variable itself. This helps to work
at bits level in the variable ordering file. See the command write order for further
information. The default value is 1.
write order - Writes variable order to file. Command
write order [-h] [-b] [(-o | -f) order-file]
Writes the current order of BDD variables in the file specified via the -o option. If no
option is specified the environment variable output order file will be considered.
If the variable output order file is unset (or set to an empty value) then standard
output will be used.
By default, the bits constituting the scalar variables encoding are not dumped. When a
variable bit should be dumped, the scalar variable which the bit belongs to is dumped
instead if not previously dumped. The result is a variable ordering containing only scalar
and boolean model variables.
To dump single bits instead of the corresponding scalar variables, either the option -b can
be specified, or the environment variable write order dumps bits must be previously
set.
When the boolean variable dumping is enabled, the single bits will occur within the resulting
ordering file in the same position that they occur at BDD level.
Command Options:
-b Dumps bits of scalar variables instead of the
single scalar variables. See also the variable
write order dumps bits.
-o order-file Sets the environment variable output order file to
order-file and then dumps the ordering list into that
file.
-f order-file Alias for the -o option. Supplied for backward
compatibility.
output order file Environment Variable
The file where the current variable ordering has to be written. A value for this variable can
also be provided with command line option -o. The default value is ‘temp.ord’.
vars order type Environment Variable
Controls the manner variables are ordered by default, when a variable ordering is
not specified by a user and not computed statically by heuristics (see variables
input order file on page 52 and bdd static order heuristics on page 53).
52
The individual bits of variables may or may not be interleaved. When bits interleaving is
not used then bits belonging to one variable are grouped together in the ordering. Otherwise,
the bits interleaving is applied and all higher bits of all variables are ordered before
all the lower bits, i.e. N-th bits of all variables go before (N-1)th bits. The exception is
boolean variables which are ordered before variables of any other type though boolean
variables consist of only 0-th bit.
The value of vars order type may be:
• inputs before. Input variables are forced to be ordered before state and frozen variables
(default). No bits interleaving is done.
• inputs after. Input variables are forced to be ordered after state and frozen variables.
No bits interleaving is done.
• topological. Input, state and frozen variables are ordered as they are declared in the
input smv file. No bits interleaving is done.
• inputs before bi. Bits are interleaved and in every group of N-th bits input variables
are forced to be ordered before state and frozen variables. This is the default value.
• inputs after bi. Bits are interleaved and in every group of N-th bits input variables
are forced to be ordered after state and frozen variables.
• topological bi. Bits are interleaved and in every group of N-th bits input, state and
frozen variables are ordered as they are declared in the input smv file.
• lexicographic. This is deprecated value. topological has to be used instead.
bdd static order heuristics Environment Variable
When a variable ordering is not specified (see variable input order file on page 52)
NUSMV can try to guess a good ordering by analyzing the input model.
Possible values are:
• none No heuristics are applied.
• basic This heuristics creates some initial ordering and then moves scalar and
word variables in this ordering to form groups. Groups go one after another
and every group contains variables which interact with each other in the model.
For example, having variables a,b,c,d,e,f and a single model constraint
TRANS next(a)=b+1 -> (next(c)=d/e & next(f)!=a) will results
in 2 groups of variables {a,b,f} and {c,d,e}.
Shell variable vars order type (page 52) provides additional control over the
heuristics. In particular, it allows to put input/state variables in the initial ordering
at the begin, the end or in topological order. Moreover, if the value of this variable
is ending in bi then in very individual group the bits of variables are additionally
interleaved.
Note that variable groups created by the heuristics has nothing to do with BDD
package groups which disallow dynamic reordering of variables in one group. After
the heuristics is applied the dynamic reordering may move any bit of any variable at
any position.
build model - Compiles the flattened hierarchy into a BDD Command
build model [-h] [-f] [-m Method]
Compiles the flattened hierarchy into a BDD (initial states, invariants, and transition
relation) using the method specified in the environment variable partition method
for building the transition relation.
53
Command Options:
-m Method Sets the environment variable partition method to
the value Method, and then builds the transition relation.
Available methods are Monolithic, Threshold and
Iwls95CP.
-f Forces model construction. By default, only one partition
method is allowed. This option allows to overcome this default,
and to build the transition relation with different partitioning
methods.
partition method Environment Variable
The method to be used in building the transition relation, and to compute images and
preimages. Possible values are:
• Monolithic. No partitioning at all.
• Threshold. Conjunctive partitioning, with a simple threshold heuristic. Assignments
are collected in a single cluster until its size grows over the value specified
in the variable conj part threshold. It is possible (default) to use affinity
clustering to improve model checking performance. See affinity variable.
• Iwls95CP. Conjunctive partitioning, with clusters generated and ordered according
to the heuristic described in [RAP+
95]. Works in conjunction with the variables
image cluster size, image W1, image W2, image W3, image W4. It is
possible (default) to use affinity clustering to improve model checking performance.
See affinity variable. It is also possible to avoid (default) preordering of clusters
(see [RAP+
95]) by setting the iwls95preorder variable appropriately.
conj part threshold Environment Variable
The limit of the size of clusters in conjunctive partitioning. The default value is 0 BDD
nodes.
affinity Environment Variable
Enables affinity clustering heuristic described in [MHS00], possible values are 0 or 1. The
default value is 1.
trans order file Environment Variable
Reads the a variables list from file tv file, to be used when clustering the transition relation.
This feature has been provided by Wendy Johnston, University of Queensland. The
results of Johnston’s research have been presented at FM 2006 in Hamilton, Canada. See
[WJKWLvdBR06].
image cluster size Environment Variable
One of the parameters to configure the behaviour of the Iwls95CP partitioning algorithm.
image cluster size is used as threshold value for the clusters. The default value is
1000 BDD nodes.
image W{1,2,3,4} Environment Variable
The other parameters for the Iwls95CP partitioning algorithm. These attribute different
weights to the different factors in the algorithm. The default values are 6, 1, 1, 6 respectively.
(For a detailed description, please refer to [RAP+
95].)
54
iwls95preorder Environment Variable
Enables cluster preordering following heuristic described in [RAP+
95], possible values
are 0 or 1. The default value is 0. Preordering can be very slow.
image verbosity Environment Variable
Sets the verbosity for the image method Iwls95CP, possible values are 0 or 1. The default
value is 0.
print iwls95options - Prints the Iwls95 Options. Command
print iwls95options [-h]
This command prints out the configuration parameters of the IWLS95 clustering algorithm,
i.e. image verbosity, image cluster size and image W{1,2,3,4}.
go - Initializes the system for the verification. Command
go [-h] [-f]
This command initializes the system for verification. It is equivalent to the
command sequence read model, flatten hierarchy, encode variables,
build flat model, build model.
If some commands have already been executed, then only the remaining ones will be in-
voked.
Command Options:
-f Forces model construction even when Cone Of Influence is
enabled.
get internal status - Prints out the internal status of the system. Command
get internal status [-h]
Prints out the internal status of the system. i.e.
• -1: read model has not yet been executed or an error occurred during its execu-
tion.
• 0: flatten hierarchy has not yet been executed or an error occurred during
its execution.
• 1: encode variables has not yet been executed or an error occurred during its
execution.
• 2: build model has not yet been executed or an error occurred during its execu-
tion.
process model - Performs the batch steps and then returns control
to the interactive shell.
Command
process model [-h] [-f] [-r] [-i model-file] [-m Method]
Reads the model, compiles it into BDD and performs the model checking of all the specification
contained in it. If the environment variable forward search has been set before,
then the set of reachable states is computed. If the option -r is specified, the reordering of
variables is performed and a dump of the variable ordering is performed accordingly. This
command simulates the batch behavior of NuSMV 2.6 and then returns the control to the
interactive shell.
55
Command Options:
-f Forces the model construction even when Cone Of Influence
is enabled.
-r Forces a variable reordering at the end of the computation,
and dumps the new variables ordering to the default ordering
file. This options acts like the command line option
-reorder.
-i model-file Sets the environment variable input file to
file model-file, and reads the model from file
model-file.
-m Method Sets the environment variable partition method to
Method and uses it as partitioning method.
build flat model - Compiles the flattened hierarchy into a Scalar
FSM
Command
build flat model [-h]
Compiles the flattened hierarchy into SEXP (initial states, invariants, and transition rela-
tion).
build boolean model - Compiles the flattened hierarchy into
boolean Scalar FSM
Command
build boolean model [-h] [-f]
Compiles the flattened hierarchy into boolean SEXP (initial states, invariants, and transition
relation).
Command Options:
-f Forces the boolean model construction.
write flat model - Writes a flat model to a file Command
write flat model [-h] [-A] [-o filename]
Writes the currently loaded SMV model in the specified file, after having flattened it.
Processes are eliminated and a corresponding equivalent model is printed out.
If no file is specified, the file specified via the environment variable
output flatten model file is used if any, otherwise standard output is
used.
Command Options:
-o filename Attempts to write the flat SMV model in filename
-A Writes the flat SMV model using a renaming map to “anonimize”
the model. All the symbols except numerical constanst
will be renamed.
output flatten model file Environment Variable
The file where the flattened model has to be written. The default value is ‘stdout’.
daggifier enabled Environment Variable
56
Determines whether the expression daggifier in the model dumping features is enabled or
not. The default is enabled.
daggifier depth threshold Environment Variable
Sets the minimum threshold for expressions depth to be daggified.
daggifier counter threshold Environment Variable
Sets the minimum threshold for expressions count to be daggified. (i.e. expression must
show at least Number time to be daggified
daggifier statistics Environment Variable
Prints daggifier statistics after model dumping.
write boolean model - Writes a flat and boolean model to a file Command
write boolean model [-h] [-o filename]
Writes the currently loaded NuSMV 2.6 model in the specified file, after having flattened
and booleanized it. Processes are eliminated and a corresponding equivalent model is
printed out.
If no file is specified, the file specified via the environment variable
output boolean model file is used if any, otherwise standard output is
used.
Command Options:
-o filename Attempts to write the flat and boolean NuSMV 2.6 model in
filename
In NuSMV 2.6 scalar variables are dumped as DEFINEs whose body is their boolean
encoding.
This allows the user to still express and see parts of the generated boolean model in terms
of the original model’s scalar variables names and values, and still keeping the generated
model purely boolean.
Also, symbolic constants are dumped within a CONSTANTS statement to declare the values
of the original scalar variables’ for future reading of the generated file.
When NuSMV 2.6 detects that there were triggered one or more dynamic reorderings in the
BDD engine, the command write boolean model also dumps the current variables
ordering, if the option output order file is set.
The dumped variables ordering will contain single bits or scalar variables depending on the
current value of the option write order dumps bits. See command write order
for further information about variables ordering.
output boolean model file Environment Variable
The file where the flattened and booleanized model has to be written. The default value is
‘stdout’.
output word format Environment Variable
This variable sets in which base unsigned word[•] and signed word[•] constants are
outputted (during traces, counterexamples, etc, printing). Possible values are 2, 8, 10 and
16. Note that if a part of an input file is outputted (for example, if a specification expression
is outputted) then the unsigned word[•] and signed word[•] constants remain in same
format as they were written in the input file.
57
dump fsm - Dumps (in DOT format) selected parts of the bdd fsm,
with optional expression
Command
dump fsm [-h] -o <fname> [-i] [-I] [-t] [-f] [-r] [-e
<expr>]
Dumps selected parts of the bdd fsm, with optional expression, in DOT format. At least
one among options [iIte] must be specified.
Command Options:
-o fname Dumps to the specified file name.
-i Dumps the initial states of the FSM, among with other selected
outputs.
-I Dumps the invariant states of the FSM, among with other
selected outputs.
-t Dumps the (monolithic) transition relation of the FSM,
among with other selected outputs.
-F Dumps the (monolithic) fair states of the FSM, among with
other selected outputs.
-r Dumps the (monolithic) reachable states of the FSM, among
with other selected outputs.
-e expr Dumps the specified expression, among with other selected
outputs (see also command dump expr).
3.2 Commands for Checking Specifications
The following commands allow for the BDD-based model checking of a NUSMV model.
compute reachable - Computes the set of reachable states Command
compute reachable [-h] [-k number] [-t seconds]
Computes the set of reachable states. The result is then used to simplify image and preimage
computations. This can result in improved performances for models with sparse state
spaces. Sometimes the execution of this command can take much time because the computation
of reachable states may be very expensive. Use the -k option to limit the number of
forward step to perform. If the reachable states has been already computed the command
returns immediately since there is nothing more to compute.
Command Options:
-k number If specified, limits the computation of reachable states to
perform number steps forward starting from the last computed
frontier. This means that you can expand the computed
reachable states incrementally using this option.
-t seconds If specified, forces the computation of reachable states to
end after “seconds” seconds. This limit could not be precise
since the if the computation of a step is running when the
limit occurs, the computation is not interrupted until the end
of the step
58
print reachable states - Prints out the number of reachable states Command
print reachable states [-h] [-v] [-d] [-f] [-o filename]
Prints the number of reachable states of the given model. In verbose mode, prints also the
list of all reachable states, if they are less than 216
. The reachable states are computed if
needed.
Command Options:
-v Prints the list of reachable states
-d Prints the list of reachable states with defines (Requires -v)
-f Prints the formula representing the reachable states
-o filename Prints the result on the specified filename instead of on
standard output
check fsm - Checks the transition relation for totality. Command
check fsm [-h] [-m | -o output-file]
Checks if the transition relation is total. If the transition relation is not total then a potential
deadlock state is shown.
Command Options:
-m Pipes the output generated by the command to the program
specified by the PAGER shell variable if defined, else
through the UNIX command “more”.
-o output-file Writes the output generated by the command to the file
output-file.
At the beginning reachable states are computed in order to guarantee that deadlock states
are actually reachable.
check fsm Environment Variable
Controls the activation of the totality check of the transition relation during the
process model call. Possible values are 0 or 1. Default value is 0.
print fsm stats - Prints out information about the fsm and cluster-
ing.
Command
print fsm stats [-h] | [-m] | [-p] | [-o output-file]
This command prints out information regarding the fsm and each cluster. In particular for
each cluster it prints out the cluster number, the size of the cluster (in BDD nodes), the
variables occurring in it, the size of the cube that has to be quantified out relative to the
cluster and the variables to be quantified out.
Also the command can print all the normalized predicates the FMS consists of. A
normalized predicate is a boolean expression which does not have other boolean subexpressions.
For example, expression (b<0 ? a/b : 0) = c is normalized into
(b<0 ? a/b=c : 0=c) which has 3 normalized predicates inside: b<0, a/b=c,
0=c.
59
Command Options:
-h Prints the command usage.
-m Pipes the output generated by the command to the program
specified by the PAGER shell variable if defined, else
through the UNIX command “more”.
-p Prints out the normalized predicates the FSM consists of.
Expressions in properties are ignored.
-o output-file Writes the output generated by the command to the file
output-file.
print fair states - Prints out the number of fair states Command
print fair states [-h] [-v]
Prints the number of fair states of the given model. In verbose mode, prints also the list of
all fair states, if they are less than 216
.
print fair transitions - Prints out the number of fair transitions,
and optionally list them
Command
print fair transitions [-h] [-v [-f format] [-o out fname]]
Prints the number of fair transitions of the given model. In verbose mode, prints also the
list of all fair transitions, with a limit of 216
. The transitions are displayed as state-inputnext
triples, in three possible formats: smv (default), dot and csv. Also, each transition is
tagged with a current state ID and next state ID.
check ctlspec - Performs fair CTL model checking. Command
check ctlspec [-h] [-m | -o output-file] [-n number | -p
"ctl-expr [IN context]" | -P "name"]
Performs fair CTL model checking.
A ctl-expr to be checked can be specified at command line using option -p. Alternatively,
option -n can be used for checking a particular formula in the property database. If
neither -n nor -p nor -P are used, all the SPEC formulas in the database are checked.
See variable use coi size sorting for changing properties verification order.
Command Options:
-m Pipes the output generated by the command in processing
SPEC s to the program specified by the PAGER shell variable
if defined, else through the UNIX command “more”.
-o output-file Writes the output generated by the command in processing
SPEC s to the file output-file.
-p "ctl-expr [IN
context]"
A CTL formula to be checked. context is the module
instance name which the variables in ctl-expr must be
evaluated in.
-n number Checks the CTL property with index number in the property
database.
60
-P name Checks the CTL property named name in the property
database.
If the ag only search environment variable has been set, then a specialized algorithm
to check AG formulas is used instead of the standard model checking algorithms.
ag only search Environment Variable
Enables the use of an ad hoc algorithm for checking AG formulas. Given a formula of
the form AG alpha, the algorithm computes the set of states satisfying alpha, and checks
whether it contains the set of reachable states. If this is not the case, the formula is proved
to be false.
forward search Environment Variable
Enables the computation of the reachable states during the process model command
and when used in conjunction with the ag only search environment variable enables
the use of an ad hoc algorithm to verify invariants. Since version 2.4.0, this option is set
by default.
ltl tableau forward search Environment Variable
Forces the computation of the set of reachable states for the tableau resulting from BDDbased
LTL model checking, performed by command check ltlspec. If the variable
ltl tableau forward search is not set (default), the resulting tableau will inherit
the computation of the reachable states from the model, if enabled. If the variable is set, the
reachable states set will be calculated for the model and for the tableau resulting from LTL
model checking. This might improve performances of the command check ltlspec,
but may also lead to a dramatic slowing down. This variable has effect only when the
calculation of reachable states for the model is enabled (see forward search).
oreg justice emptiness bdd algorithm Environment Variable
The algorithm used to determine language emptiness of a B¨uchi fair transition system.
The algorithm may be used from the following commands: check ltlspec,
check pslspec. Possible values are:
• EL bwd The default value. The Emerson-Lei algorithm [EL86] in its usual backwards
direction, i.e., using backward image computations.
• EL fwd A variant of the Emerson-Lei algorithm that uses only forward
image computations (see, e.g., [HKQ03]). This variant requires
the variables forward search, ltl tableau forward search,
use reachable states to be set. Furthermore, counterexample computation
is not yet implemented, i.e., counter examples should not be set. When
invoking one of the commands mentioned above, all required settings are performed
automatically if not already found as needed, and are restored after execution of the
command.
check invar - Performs model checking of invariants Command
check invar [-h] [-m | -o output-file] [-n number | -p
"invar-expr [IN context]" | -P "name"] [-s strategy]
[-e f-b-heuristic] [-j b-b-heuristic] [-t threshold] [-k
length]
61
Performs invariant checking on the given model. An invariant is a set of states. Checking
the invariant is the process of determining that all states reachable from the initial states lie
in the invariant. Invariants to be verified can be provided as simple formulas (without any
temporal operators) in the input file via the INVARSPEC keyword or directly at command
line, using the option -p.
Option -n can be used for checking a particular invariant of the model. If neither -n nor
-p are used, all the invariants are checked.
During checking of invariants all the fairness conditions associated with the model are
ignored.
If an invariant does not hold, a proof of failure is demonstrated. This consists of a path
starting from an initial state to a state lying outside the invariant. This path has the property
that it is the shortest path leading to a state outside the invariant.
A search strategy can be specified with -s option. This is useful to speed up the check
in some situations. If “forward-backward” or “bdd-bmc” strategy is specified then it is
possible to choose a search heuristic with -e option; “bdd-bmc” strategy has some other
options explained below.
See variable use coi size sorting for changing properties verification order.
62
Command Options:
-m Pipes the output generated by the program in processing
INVARSPEC s to the program specified by the PAGER
shell variable if defined, else through the UNIX command
“more”.
-o output-file Writes the output generated by the command in processing
INVARSPEC s to the file output-file.
-n number Checks the INVAR property with index number in the
property database.
-p "invar-expr
[IN context]"
The command line specified invariant formula to be verified.
context is the module instance name which the variables
in invar-expr must be evaluated in.
-P name Checks the INVAR property named name in the property
database.
-s strategy Chooses the strategy to use while performing reachability
analysis. Possible strategies are:
• “forward” Explore the search space from initial states
and try to reach bad states.
• “backward” Explore the search space from bad states
and try to reach initial states.
• “forward-backward” Explore the search space using a
heuristic to decide at each step whether to move from
bad states or from reachable states.
• “bdd-bmc” Explore the search space using BDD
with “forward-backward” strategy and use a heuristic
(specified with -j option) to decide if to switch
from BDD technology to BMC. The idea is to expand
the sets of states reachable from both bad and initial
states, eventually stop and search for a path between
frontiers using BMC technology. Options -j, -t and
-k are enabled only when using this strategy. Note
that the algorithm used for the BMC approach is the
one specified in the variable “bmc invar alg”.
If this option is not specified, the value of the environment
variable “check invar strategy” is considered.
-e f-b-heuristic Specify the heuristic that decides at each step if we must expand
reachable states or bad states. This option is enabled
only when using “forward-backward” or “bdd-bmc” strategies.
Possible values are “zigzag” and “smallest”. “zigzag”
forces to perform a step forward and the next step backward
and so on, while “smallest” performs a step from the frontier
with the BDD representing the state is smaller. If this
option is not specified, the value of the environment variable
“check invar forward backward heuristic” is considered.
63
-j b-b-heuristic When using “bdd-bmc” strategy specify the heuristic that
decides at which step we must switch from BDD to BMC
technolgy. You should use the option -t to specify the
threshold for the chosen heuristic. Possible heuristics are
“steps” and “size”. “steps” forces to switch after a number
of steps equal to the threshold, while “size” switch
when BDDs are bigger (in the number of nodes) than the
threshold. If this option is not specified, the value of
the environment variable “check invar bddbmc heuristic” is
considered.
-t threshold When using “bdd-bmc” strategy specify the threshold for the
chosen heuristic. If this option is not specified, the value of
the environment variable “check invar bddbmc threshold”
is considered.
-k length When using “bdd-bmc” strategy specify the maximum
length of the path to search for during BMC search. If this
option is not specified, the value of the environment variable
“bmc length” is considered.
check invar strategy Environment Variable
Determines default search strategy to be used when using command “check invar”. See the
documentation of “check invar” for a detailed description of possible values and intended
semantics.
check invar forward backward heuristic Environment Variable
Determines default forward-backward heuristic to be used when using command
“check invar”. See the documentation of “check invar” for a detailed description of possible
values and intended semantics.
check invar bdd bmc heuristic Environment Variable
Determines default bdd-bmc heuristic to be used when using command “check invar”.
See the documentation of “check invar” for a detailed description of possible values and
intended semantics.
check invar bdd bmc threshold Environment Variable
Determines default bdd-bmc threshold to be used when using command “check invar”.
See the documentation of “check invar” for a detailed description of possible values and
intended semantics.
check ltlspec - Performs LTL model checking Command
check ltlspec [-h] [-m | -o output-file] [-n number | -p
"ltl-expr [IN context]" | -P "name" ]
Performs model checking of LTL formulas. LTL model checking is reduced to CTL model
checking as described in the paper by [CGH97].
A ltl-expr to be checked can be specified at command line using option -p. Alternatively,
option -n can be used for checking a particular formula in the property database. If
neither -n nor -p are used, all the LTLSPEC formulas in the database are checked.
See variable use coi size sorting for changing properties verification order.
64
Command Options:
-m Pipes the output generated by the command in processing
LTLSPECs to the program specified by the PAGER
shell variable if defined, else through the UNIX command
“more”.
-o output-file Writes the output generated by the command in processing
LTLSPECs to the file output-file.
-p "ltl-expr
[IN context]"
An LTL formula to be checked. context is the module
instance name which the variables in ltl-expr must be
evaluated in.
-P "name" Checks the LTL property named name
-n number Checks the LTL property with index number in the property
database.
ltl2smv single justice Environment Variable
Informs the ltl2smv tableau constructor to generate a symbolic fair transition system for
the given LTL formula with one single Justice constraint instead of possibly more than
one. (This is achieved by replacing the multiple Justice with a single Justice plus a an
additional monitor.) By default multiple Justice are built.
check compute - Performs computation of quantitative character-
istics
Command
check compute [-h] [-m | -o output-file] [-n number | -p
"compute-expr [IN context]" | -P "name"]
This command deals with the computation of quantitative characteristics of real time systems.
It is able to compute the length of the shortest (longest) path from two given set of
states.
MAX [ alpha , beta ]
MIN [ alpha , beta ]
Properties of the above form can be specified in the input file via the keyword COMPUTE
or directly at command line, using option -p.
If there exists an infinite path beginning in a state in start that never reaches a state in
final, then infinity is returned. If any of the initial or final states is empty, then undefined is
returned.
Option -n can be used for computing a particular expression in the model. If neither -n
nor -p are used, all the COMPUTE specifications are computed.
It is important to remark here that if the FSM is not total (i.e. it contains deadlock states)
COMPUTE may produce wrong results. It is possible to check the FSM against deadlock
states by calling the command check fsm.
See variable use coi size sorting for changing properties verification order.
Command Options:
-m Pipes the output generated by the command in processing
COMPUTEs to the program specified by the PAGER
shell variable if defined, else through the UNIX command
“more”.
65
-o output-file Writes the output generated by the command in processing
COMPUTEs to the file output-file.
-p "compute-expr
[IN context]"
A COMPUTE formula to be checked. context is the module
instance name which the variables in compute-expr
must be evaluated in.
-n number Computes only the property with index number.
-P name Checks the COMPUTE property named name in the property
database.
check property - Checks a property into the current list of properties,
or a newly specified property
Command
check property [-h] [-n number | -P "name"] | [(-c | -l | -i
| -s | -q ) [-p "formula [IN context]"]]
Checks the specified property taken from the property list, or adds the new specified property
and checks it. It is possible to check LTL, CTL, INVAR, PSL and quantitative
(COMPUTE) properties. Every newly inserted property is inserted and checked.
See variable use coi size sorting for changing properties verification order.
Command Options:
-n number Checks the property stored at the given index
-P name Checks the property named name in the property database.
-c Checks all the CTL properties not already checked. If -p is
used, the given formula is expected to be a CTL formula.
-l Checks all the LTL properties not already checked. If -p is
used, the given formula is expected to be a LTL formula.
-i Checks all the INVAR properties not already checked. If
-p is used, the given formula is expected to be a INVAR
formula.
-s Checks all the PSL properties not already checked. If -p is
used, the given formula is expected to be a PSL formula.
-q Checks all the COMPUTE properties not already checked. If
-p is used, the given formula is expected to be a COMPUTE
formula.
-p "formula
[IN context]"
Checks the formula specified on the command-line.
context is the module instance name which the variables
in formula must be evaluated in.
add property - Adds a property to the list of properties Command
add property [-h] [(-c | -l | -i | -q | -s) -p "formula
[IN context]"] [-n "name"]
Adds a property in the list of properties. It is possible to insert LTL, CTL, INVAR,
PSL and quantitative (COMPUTE) properties. Every newly inserted property is initialized
to unchecked. A type option must be given to properly execute the command.
Command Options:
-c Adds a CTL property.
66
-l Adds an LTL property.
-i Adds an INVAR property.
-s Adds a PSL property.
-q Adds a quantitative (COMPUTE) property.
-p "formula
[IN context]"
Adds the formula specified on the command-line.
context is the module instance name which the variables
in formula must be evaluated in.
-n "name" Sets the name of the property to “name”
show property - Shows the currently stored properties Command
show property [-h] [-n idx | -P "name"] [-c | -l | -i | -s |
-q] [-f | -v | -u] [-m | -o] [-F format]
Shows the properties currently stored in the list of properties. This list is initialized with
the properties (CTL, LTL, INVAR, COMPUTE) present in the input file, if any; then all of
the properties added by the user with the relative check property or add property
commands are appended to this list. For every property, the following informations are
displayed:
• the identifier of the property (a progressive number);
• the property name if available;
• the property formula;
• the type (CTL, LTL, INVAR, PSL, COMPUTE)
• the status of the formula (Unchecked, True, False) or the result of the quantitative
expression, if any (it can be infinite);
• if the formula has been found to be false, the index number of the corresponding
counterexample trace.
By default, all the properties currently stored in the list of properties are shown. Specifying
the suitable options, properties with a certain status (Unchecked, True, False) and/or of a
certain type (e.g. CTL, LTL), or with a given identifier, it is possible to let the system
show a restricted set of properties. It is allowed to insert only one option per status and
one option per type.
Command Options:
-P name Prints out the property named ”name”
-n idx Prints out the property numbered ”idx”
-c Prints only CTL properties
-l Prints only LTL properties
-i Prints only INVAR properties
-q Prints only COMPUTE properties
-u Prints only unchecked properties
-t Prints only those properties found to be true
-f Prints only those properties found to be false
67
-s Prints the number of stored properties
-o filename Writes the output generated by the command to filename
-F format Prints with the specified format. tabular and xml are common
formats, however use -F help to see all available
formats.
-m Pipes the output through the program specified by the
PAGER shell variable if defined, else through the UNIX
”more” command
convert property to invar - Convert, when possible, properties to
invariant properties
Command
convert property to invar[-n number | -P "name" | -p
(G next-expr | AG next-expr)]
Convert CTL and LTL properties to invariant ones. Only properties of the form “AG nextexpr”
and “G next-expr” are processed. The conversion is performed over the specification
selected with one between -n, -P or -p, if given, or all the CTL and LTL properties in the
model. The generated properties are added to the database (they can be listed with the
command show property).
Command Options:
-n number Convert CTL or LTL property with index “number”.
-P "name" Convert CTL or LTL property named “name”.
-p G next-expr |
AG next-expr
Convert the given CTL or LTL formula.
write coi model - Writes a restricted flat model to a file Command
write coi model [-h] [-n idx | -p "expr" | -P "name"] [-c |
-l | -i | -s | -q] [-C] [-g]
Writes the currently loaded SMV model in the specified file, after having flattened it. If
a property is specified, the dumped model is the result of applying the Cone Of Influence
over that property. otherwise, a restricted SMV model is dumped for each property in the
property database.
Processes are eliminated and a corresponding equivalent model is printed out.
If no file is specified, stderr is used for output
Command Options:
-o filename Attempts to write the flat SMV model in filename
-p expr Applies COI for the given expression expression. Notice
that also the property type has to be specified
-P name Applies COI for property named ”name”
-n idx Applies COI for property stored with index ”idx”
-c Dumps COI model for all CTL properties
-l Dumps COI model for all LTL properties
-i Dumps COI model for all INVAR properties
68
-s Dumps COI model for all PSL properties
-q Dumps COI model for all COMPUTE properties
-C Only prints the list of variables that are in the COI of
properties
-g Dumps the COI model that represents the union of all COI
properties
cone of influence Environment Variable
Uses the cone of influence reduction when checking properties. When cone of influence
reduction is active, the problem encoded in the solving engine consists only of the relevant
parts of the model for the property being checked. This can greatly help in reducing solving
time and memory usage. Note however, that a COI counter-example trace may or may not
be a valid counter-example trace for the original model.
use coi size sorting Environment Variable
Uses the cone of influence variables set size for properties sorting, before the verification
step. If set to 1, properties are verified starting with the one that has the smallest COI
set, ending with the property with the biggest COI set. If set to 0, properties are verified
according to the declaration order in the input file
prop print method Environment Variable
Determines how properties are printed. The following methods are available:
name Prints the property name. If not available, defaults to method “index”
index Prints the property index. If not available, defaults to method “truncated”
truncated Prints the formula of the property. If the formula is longer than 40 characters, it is
truncated
formula The default method, simply prints the formula
3.3 Commands for Bounded Model Checking
In this section we describe in detail the commands for doing and controlling Bounded Model
Checking in NUSMV. Bounded Model Checking is based on the reduction of the bounded
model checking problem to a propositional satisfiability problem. After the problem is generated,
NUSMV internally calls a propositional SAT solver in order to find an assignment which
satisfies the problem. Currently NUSMV supplies two SAT solvers: Zchaff and MiniSat. If
none of the two is enabled, all Bounded Model Checking part in NUSMV will not be available.
Notice that Zchaff and MiniSat are for non-commercial purposes only. They are therefore not
included in the source code distribution or in some of the binary distributions of NUSMV.
Some commands for Bounded Model Checking use incremental algorithms. These algorithms
exploit the fact that satisfiability problems generated for a particular bounded model
checking problem often share common subparts. So information obtained during solving of
one satisfiability problem can be used in solving of another one. The incremental algorithms
usually run quicker then non-incremental ones but require a SAT solver with incremental interface.
At the moment, only Zchaff and MiniSat offer such an interface. If none of these solvers
are linked to NUSMV, then the commands which make use of the incremental algorithms will
not be available.
It is also possible to generate the satisfiability problem without calling the SAT solver. Each
generated problem is dumped in DIMACS format to a file. DIMACS is the standard format used
69
as input by most SAT solvers, so it is possible to use NUSMV with a separate external SAT
solver. At the moment, the DIMACS files can be generated only by commands which do not use
incremental algorithms.
bmc setup - Builds the model in a Boolean Epression format. Command
bmc setup [-h]
You must call this command before use any other bmc-related command. Only one call
per session is required.
go bmc - Initializes the system for the BMC verification. Command
go bmc [-h] [-f]
This command initializes the system for verification. It is equivalent to the
command sequence read model, flatten hierarchy, encode variables,
build boolean model, bmc setup. If some commands have already been executed,
then only the remaining ones will be invoked.
Command Options:
-f Forces model construction even when Cone Of Influence is
enabled.
sexp inlining Environment Variable
This variable enables the Sexp inlining when the boolean model is built. Sexp inlining is
performed in a similar way to RBC inlining (see system variable rbc inlining) but the
underlying structures and kind of problem are different, because inlining is applied at the
Sexp level instead of the RBC level.
Inlining is applied to initial states, invariants and transition relations. By default, Sexp
inlining is disabled.
rbc inlining Environment Variable
When set, this variable makes BMC perform the RBC inlining before committing any
problem to the SAT solver. Depending on the problem structure and length, the inlining
may either make SAT solving much faster, or slow it down dramatically. Experiments
showed an average improvement in time of SAT solving when RBC inlining is enabled.
RBC inlining is enabled by default.
The idea about inlining was taken from [ABE00] by Parosh Aziz Abdulla, Per Bjesse and
Niklas E´en.
rbc rbc2cnf algorithm Environment Variable
This variable defines the algorithm used for conversion from RBC to CNF format in
which a problem is supplied to a SAT solver. The default value ’sheridan’ refers to
[She04] algorithm which allows to obtain a more compact CNF formulas. The other value
’tseitin’ refers to a standard Tseiting transformation algorithm.
check ltlspec bmc - Checks the given LTL specification, or all LTL
specifications if no formula is given. Checking parameters are the
maximum length and the loopback value
Command
70
check ltlspec bmc [-h ] | [-n idx | -p "formula [IN
context]" | -P "name"] [-k max length] [-l loopback] [-o
filename]
This command generates one or more problems, and calls SAT solver for each one. Each
problem is related to a specific problem bound, which increases from zero (0) to the given
maximum problem length. Here max length is the bound of the problem that system is
going to generate and solve. In this context the maximum problem bound is represented
by the -k command parameter, or by its default value stored in the environment variable
bmc length. The single generated problem also depends on the loopback parameter
you can explicitly specify by the -l option, or by its default value stored in the environment
variable bmc loopback.
The property to be checked may be specified using the -n idx or the -p "formula"
options. If you need to generate a DIMACS dump file of all generated problems, you must
use the option -o "filename".
Command Options:
-n index index is the numeric index of a valid LTL specification formula
actually located in the properties database.
-p "formula
[IN context]"
Checks the formula specified on the command-line.
context is the module instance name which the variables
in formula must be evaluated in.
-P name Checks the LTL property named name in the property
database.
-k max length max length is the maximum problem bound to be checked.
Only natural numbers are valid values for this option. If no
value is given the environment variable bmc length is considered
instead.
-l loopback The loopback value may be:
• a natural number in (0, max length-1). A positive sign
(‘+’) can be also used as prefix of the number. Any invalid
combination of length and loopback will be skipped
during the generation/solving process.
• a negative number in (-1, -bmc length). In this case loopback
is considered a value relative to max length. Any invalid
combination of length and loopback will be skipped
during the generation/solving process.
• the symbol ‘X’, which means “no loopback”.
• the symbol ‘*’, which means “all possible loopbacks from
zero to length-1” .
-o filename filename is the name of the dumped dimacs file. It may contain
special symbols which will be macro-expanded to form
the real file name. Possible symbols are:
• @F: model name with path part.
• @f: model name without path part.
• @k: current problem bound.
• @l: current loopback value.
• @n: index of the currently processed formula in the property
database.
71
• @@: the ‘@’ character.
check ltlspec bmc onepb - Checks the given LTL specification, or
all LTL specifications if no formula is given. Checking parameters
are the single problem bound and the loopback value
Command
check ltlspec bmc onepb [-h ] | [ -n idx | -p "formula"
[IN context] | -P "name"] [-k length] [-l loopback] [-o
filename]
As command check ltlspec bmc but it produces only one single problem with
fixed bound and loopback values, with no iteration of the problem bound from zero to
max length.
Command Options:
-n index index is the numeric index of a valid LTL specification formula
actually located in the properties database. The validity
of index value is checked out by the system.
-p "formula
[IN context]"
Checks the formula specified on the command-line.
context is the module instance name which the variables
in formula must be evaluated in.
-P name Checks the LTL property named name in the property
database.
-k length length is the problem bound used when generating the single
problem. Only natural numbers are valid values for
this option. If no value is given the environment variable
bmc length is considered instead.
-l loopback The loopback value may be:
• a natural number in (0, max length-1). A positive sign
(’+’) can be also used as prefix of the number. Any invalid
combination of length and loopback will be skipped
during the generation/solving process.
• a negative number in (-1, -bmc length). In this case loopback
is considered a value relative to length. Any invalid
combination of length and loopback will be skipped during
the generation/solving process.
• the symbol ’X’, which means “no loopback” .
• the symbol ’*’, which means “all possible loopback from
zero to length-1”.
-o filename filename is the name of the dumped dimacs file. It may contain
special symbols which will be macro-expanded to form
the real file name. Possible symbols are:
• @F: model name with path part.
• @f: model name without path part.
• @k: current problem bound.
• @l: current loopback value.
• @n: index of the currently processed formula in the property
database.
72
• @@: the ’@’ character.
gen ltlspec bmc - Dumps into one or more dimacs files the given
LTL specification, or all LTL specifications if no formula is given.
Generation and dumping parameters are the maximum bound and
the loopback value
Command
gen ltlspec bmc [-h] | [ -n idx | -p "formula" [IN context]
| -P "name"] [-k max length] [-l loopback] [-o filename]
This command generates one or more problems, and dumps each problem into a dimacs
file. Each problem is related to a specific problem bound, which increases from zero (0) to
the given maximum problem bound. In this short description length is the bound of the
problem that system is going to dump out.
In this context the maximum problem bound is represented by the max length parameter,
or by its default value stored in the environment variable bmc length.
Each dumped problem also depends on the loopback you can explicitly specify by the -l
option, or by its default value stored in the environment variable bmc loopback.
The property to be checked may be specified using the -n idx or the -p "formula "
options.
You may specify dimacs file name by using the option -o filename , otherwise the
default value stored in the environment variable bmc dimacs filename will be con-
sidered.
Command Options:
-n index index is the numeric index of a valid LTL specification formula
actually located in the properties database. The validity
of index value is checked out by the system.
-p "formula
[IN context]"
Checks the formula specified on the command-line.
context is the module instance name which the variables
in formula must be evaluated in.
-P name Checks the LTL property named name in the property
database.
-k max length max length is the maximum problem bound used when increasing
problem bound starting from zero. Only natural
numbers are valid values for this option. If no value is
given the environment variable bmc length value is considered
instead.
-l loopback The loopback value may be:
• a natural number in (0, max length-1). A positive sign
(’+’) can be also used as prefix of the number. Any invalid
combination of bound and loopback will be skipped
during the generation and dumping process.
• a negative number in (-1, -bmc length). In this case loopback
is considered a value relative to max length. Any invalid
combination of bound and loopback will be skipped
during the generation process.
73
• the symbol ‘X’, which means “no loopback”.
• the symbol ‘*’, which means “all possible loopback from
zero to length-1”.
-o filename filename is the name of dumped dimacs files. If this options
is not specified, variable bmc dimacs filename will be considered.
The file name string may contain special symbols
which will be macro-expanded to form the real file name.
Possible symbols are:
• @F: model name with path part.
• @f: model name without path part.
• @k: current problem bound.
• @l: current loopback value .
• @n: index of the currently processed formula in the property
database.
• @@: the ‘@’ character.
gen ltlspec bmc onepb - Dumps into one dimacs file the problem
generated for the given LTL specification, or for all LTL specifications
if no formula is explicitly given. Generation and dumping
parameters are the problem bound and the loopback value
Command
gen ltlspec bmc onepb [-h ] | [ -n idx | -p "formula"
[IN context] | -P "name"] [-k length] [-l loopback] [-o
filename]
As the gen ltlspec bmc command, but it generates and dumps only one problem given
its bound and loopback.
Command Options:
-n index index is the numeric index of a valid LTL specification formula
actually located in the properties database. The validity
of index value is checked out by the system.
-p "formula
[IN context]"
Checks the formula specified on the command-line.
context is the module instance name which the variables
in formula must be evaluated in.
-P name Checks the LTL property named name in the property
database.
-k length length is the single problem bound used to generate and
dump it. Only natural numbers are valid values for this
option. If no value is given the environment variable
bmc length is considered instead.
-l loopback The loopback value may be:
• a natural number in (0, length-1). A positive sign (’+’) can
be also used as prefix of the number. Any invalid combination
of length and loopback will be skipped during the
generation and dumping process.
74
• negative number in (-1, -length). Any invalid combination
of length and loopback will be skipped during the generation
process.
• the symbol ‘X’, which means “no loopback”.
• the symbol ‘*’, which means “all possible loopback from
zero to length-1”.
-o filename filename is the name of the dumped dimacs file. If this options
is not specified, variable bmc dimacs filename
will be considered. The file name string may contain special
symbols which will be macro-expanded to form the real
file name. Possible symbols are:
• @F: model name with path part
• @f: model name without path part
• @k: current problem bound
• @l: current loopback value
• @n: index of the currently processed formula in the property
database
• @@: the ’@’ character
check ltlspec bmc inc - Checks the given LTL specification, or all
LTL specifications if no formula is given, using an incremental algorithm.
Checking parameters are the maximum length and the
loopback value
Command
check ltlspec bmc inc [-h ] | [-n idx | -p "formula [IN
context]" | -P "name" ] [-k max length] [-l loopback]
For each problem this command incrementally generates many satisfiability subproblems
and calls the SAT solver on each one of them. The incremental algorithm exploits the
fact that subproblems have common subparts, so information obtained during a previous
call to the SAT solver can be used in the consecutive ones. Logically, this command does
the same thing as check ltlspec bmc (see the description on page 70) but usually
runs considerably quicker. A SAT solver with an incremental interface is required by
this command, therefore if no such SAT solver is provided then this command will be
unavailable.
See variable use coi size sorting for changing properties verification order.
Command Options:
-n index index is the numeric index of a valid LTL specification formula
actually located in the properties database.
-p "formula
[IN context]"
Checks the formula specified on the command-line.
context is the module instance name which the variables
in formula must be evaluated in.
-P name Checks the LTL property named name in the property
database.
-k max length max length is the maximum problem bound must be
reached. Only natural numbers are valid values for this
option. If no value is given the environment variable
bmc length is considered instead.
75
-l loopback The loopback value may be:
• a natural number in (0, max length-1). A positive sign
(‘+’) can be also used as prefix of the number. Any invalid
combination of length and loopback will be skipped
during the generation/solving process.
• a negative number in (-1, -bmc length). In this case loopback
is considered a value relative to max length. Any invalid
combination of length and loopback will be skipped
during the generation/solving process.
• the symbol ‘X’, which means “no loopback”.
• the symbol ‘*’, which means “all possible loopback from
zero to length-1” .
check ltlspec sbmc - Checks the given LTL specification, or all
LTL specifications if no formula is given. Checking parameters are
the maximum length and the loopback value
Command
check ltlspec sbmc [-h] | [-n idx | -p "formula [IN
context]" | -P "name"] [-k max length] [-l loopback] [-o
filename]
This command generates one or more problems, and calls SAT solver for each one. The
BMC encoding used is the one by of Latvala, Biere, Heljanko and Junttila as described
in [LBHJ05]. Each problem is related to a specific problem bound, which increases from
zero (0) to the given maximum problem length. Here max length is the bound of the
problem that system is going to generate and solve. In this context the maximum problem
bound is represented by the -k command parameter, or by its default value stored in the
environment variable bmc length. The single generated problem also depends on the
loopback parameter you can explicitly specify by the -l option, or by its default value
stored in the environment variable bmc loopback.
The property to be checked may be specified using the -n idx or the -p "formula"
options. If you need to generate a DIMACS dump file of all generated problems, you must
use the option -o "filename".
See variable use coi size sorting for changing properties verification order.
Command Options:
-n index index is the numeric index of a valid LTL specification formula
actually located in the properties database.
-p "formula
[IN context]"
Checks the formula specified on the command-line.
context is the module instance name which the variables
in formula must be evaluated in.
-P name Checks the LTL property named name in the property
database.
-k max length max length is the maximum problem bound to be checked.
Only natural numbers are valid values for this option. If no
value is given the environment variable bmc length is considered
instead.
76
-l loopback The loopback value may be:
• a natural number in (0, max length-1). A positive sign
(‘+’) can be also used as prefix of the number. Any invalid
combination of length and loopback will be skipped
during the generation/solving process.
• a negative number in (-1, -bmc length). In this case loopback
is considered a value relative to max length. Any invalid
combination of length and loopback will be skipped
during the generation/solving process.
• the symbol ‘X’, which means “no loopback”.
• the symbol ‘*’, which means “all possible loopbacks from
zero to length-1” .
-o filename filename is the name of the dumped dimacs file. It may contain
special symbols which will be macro-expanded to form
the real file name. Possible symbols are:
• @F: model name with path part.
• @f: model name without path part.
• @k: current problem bound.
• @l: current loopback value.
• @n: index of the currently processed formula in the property
database.
• @@: the ‘@’ character.
check ltlspec sbmc inc - Checks the given LTL specification, or
all LTL specifications if no formula is given. Checking parameters
are the maximum length and the loopback value
Command
check ltlspec sbmc inc [-h ] | [ -n idx | -p "formula [IN
context]" | -P "name"] [-k max length] [-N] [-c]
This command generates one or more problems, and calls SAT solver for each one. The Incremental
BMC encoding used is the one by of Heljanko, Junttila and Latvala, as described
in [KHL05]. For each problem this command incrementally generates many satisfiability
subproblems and calls the SAT solver on each one of them. Each problem is related to
a specific problem bound, which increases from zero (0) to the given maximum problem
length. Here max length is the bound of the problem that system is going to generate
and solve. In this context the maximum problem bound is represented by the -k command
parameter, or by its default value stored in the environment variable bmc length.
The property to be checked may be specified using the -n idx, the -p "formula" or
the -P "name" options.
See variable use coi size sorting for changing properties verification order.
Command Options:
-n index index is the numeric index of a valid LTL specification formula
actually located in the properties database.
-p "formula
[IN context]"
Checks the formula specified on the command-line.
context is the module instance name which the variables
in formula must be evaluated in.
-P name Checks the LTL property named name in the property
database.
77
-k max length max length is the maximum problem bound to be checked.
Only natural numbers are valid values for this option. If no
value is given the environment variable bmc length is considered
instead.
-N Does not perform virtual unrolling.
-c Performs completeness check.
gen ltlspec sbmc - Dumps into one or more dimacs files the given
LTL specification, or all LTL specifications if no formula is given.
Generation and dumping parameters are the maximum bound and
the loopback values.
Command
gen ltlspec sbmc [-h ] | [ -n idx | -p "formula [IN
context]" | -P "name" ] [-k max length] [-l loopback] [-o
filename]
This command generates one or more problems, and dumps each problem into a dimacs
file. The BMC encoding used is the one by of Latvala, Biere, Heljanko and Junttila as described
in [LBHJ05]. Each problem is related to a specific problem bound, which increases
from zero (0) to the given maximum problem length. Here max length is the bound of
the problem that system is going to generate and dump. In this context the maximum problem
bound is represented by the -k command parameter, or by its default value stored in
the environment variable bmc length. The single generated problem also depends on
the loopback parameter you can explicitly specify by the -l option, or by its default
value stored in the environment variable bmc loopback.
The property to be used for the problem dumping may be specified using the -n idx
or the -p "formula" options. You may specify dimacs file name by using the option
-o "filename", otherwise the default value stored in the environment variable
bmc dimacs filename will be considered.
Command Options:
-n index index is the numeric index of a valid LTL specification formula
actually located in the properties database.
-p "formula
[IN context]"
Dumps the formula specified on the command-line.
context is the module instance name which the variables
in formula must be evaluated in.
-P "name" Checks the LTL property named name
-k max length max length is the maximum problem bound to be generated.
Only natural numbers are valid values for this option. If no
value is given the environment variable bmc length is considered
instead.
-l loopback The loopback value may be:
• a natural number in (0, max length-1). A positive sign
(‘+’) can be also used as prefix of the number. Any invalid
combination of length and loopback will be skipped
during the generation/solving process.
78
• a negative number in (-1, -bmc length). In this case loopback
is considered a value relative to max length. Any invalid
combination of length and loopback will be skipped
during the generation/solving process.
• the symbol ‘X’, which means “no loopback”.
• the symbol ‘*’, which means “all possible loopbacks from
zero to length-1” .
-o filename filename is the name of the dumped dimacs file. It may contain
special symbols which will be macro-expanded to form
the real file name. Possible symbols are:
• @F: model name with path part.
• @f: model name without path part.
• @k: current problem bound.
• @l: current loopback value.
• @n: index of the currently processed formula in the property
database.
• @@: the ‘@’ character.
bmc length Environment Variable
Sets the generated problem bound. Possible values are any natural number, but must be
compatible with the current value held by the variable bmc loopback. The default value is
10.
bmc loopback Environment Variable
Sets the generated problem loop. Possible values are:
• Any natural number, but less than the current value of the variable bmc length. In
this case the loop point is absolute.
• Any negative number, but greater than or equal to -bmc length. In this case specified
loop is the loop length.
• The symbol ’X’, which means “no loopback”.
• The symbol ’*’, which means “any possible loopbacks”.
The default value is *.
bmc optimized tableau Environment Variable
Uses depth1 optimization for LTL Tableau construction in BMC.
bmc force pltl tableau Environment Variable
Forces to use PLTL instead of LTL for BMC tableau construction.
bmc dimacs filename Environment Variable
This is the default file name used when generating DIMACS problem dumps. This variable
may be taken into account by all commands which belong to the gen ltlspec bmc family.
DIMACS file name can contain special symbols which will be expanded to represent the
actual file name. Possible symbols are:
• @F The currently loaded model name with full path.
• @f The currently loaded model name without path part.
• @n The numerical index of the currently processed formula in the property database.
79
• @k The currently generated problem length.
• @l The currently generated problem loopback value.
• @@ The ‘@’ character.
The default value is “@f k@k l@l n@n ”.
bmc sbmc gf fg opt Environment Variable
Controls whether the system exploits an optimization when performing SBMC on formulae
in the form FGp or GFp. The default value is 1 (active).
check invar bmc - Generates and solves the given invariant, or all
invariants if no formula is given
Command
check invar bmc [-h | -n idx | -p "formula" [IN context] |
-P "name"] [-a alg] [-e] [-k bmc bound] [-o filename]
In Bounded Model Checking, invariants are proved using induction. For this, satisfiability
problems for the base and induction step are generated and a SAT solver is invoked on
each of them. At the moment, two algorithms can be used to prove invariants. In one
algorithm, which we call “classic”, the base and induction steps are built on one state and
one transition, respectively. Another algorithm, which we call “een-sorensson” [ES04],
can build the base and induction steps on many states and transitions. As a result, the
second algorithm is more powerful.
Also, notice that during checking of invariants all the fairness conditions associated with
the model are ignored.
See variable use coi size sorting for changing properties verification order.
Command Options:
-n index index is the numeric index of a valid INVAR specification
formula actually located in the property database. The validity
of index value is checked out by the system.
-p "formula
[IN context]"
Checks the formula specified on the command-line.
context is the module instance name which the variables
in formula must be evaluated in.
-P name Checks the INVAR property named name in the property
database.
-k max length max length is the maximum problem bound that can be
reached. Only natural numbers are valid values for this option.
Use this option only if the “een-sorensson” algorithm
is selected. If no value is given the environment variable
bmc length is considered instead.
-e Performs an extra induction step for finding a proof. Can be
used only with the “een-sorensson” algorithm
-a alg alg specifies the algorithm. The value can be classic or
een-sorensson. If no value is given the environment
variable bmc invar alg is considered instead.
80
-o filename filename is the name of the dumped dimacs file. It may contain
special symbols which will be macro-expanded to form
the real file name. Possible symbols are:
• @F: model name with path part
• @f: model name without path part
• @n: index of the currently processed formula in the properties
database
• @@: the ‘@’ character
gen invar bmc - Generates the given invariant, or all invariants if
no formula is given
Command
gen invar bmc [-h | -n idx | -p "formula [IN context]" | -P
"name"] [-o filename]
At the moment, the invariants are generated using “classic” algorithm only (see the description
of check invar bmc on page 80).
Command Options:
-n index index is the numeric index of a valid INVAR specification
formula actually located in the property database. The validity
of index value is checked out by the system.
-p "formula
[IN context]"
Checks the formula specified on the command-line.
context is the module instance name which the variables
in formula must be evaluated in.
-P name Checks the INVAR property named name in the property
database.
-o filename filename is the name of the dumped dimacs file. If you do
not use this option the dimacs file name is taken from the
environment variable bmc invar dimacs filename.
File name may contain special symbols which will be
macro-expanded to form the real dimacs file name. Possible
symbols are:
• @F: model name with path part
• @f: model name without path part
• @n: index of the currently processed formula in the properties
database
• @@: the ’@’ character
check invar bmc inc - Generates and solves the given invariant,
or all invariants if no formula is given, using incremental algo-
rithms
Command
check invar bmc inc [-h ] | [ -n idx | -p "formula" [IN
context] | -P "name" ]] [-a algorithm]
This command does the same thing as check invar bmc (see the description on page
80) but uses an incremental algorithm and therefore usually runs considerably quicker.
The incremental algorithms exploit the fact that satisfiability problems generated for a
particular invariant have common subparts, so information obtained during solving of one
problem can be used in solving another one. A SAT solver with an incremental interface
is required by this command. If no such SAT solver is provided then this command will be
unavailable.
81
There are two incremental algorithms which can be used: “Dual” and “ZigZag”. Both
algorithms are equally powerful, but may show different performance depending on a SAT
solver used and an invariant being proved. At the moment, the “Dual” algorithm cannot
be used if there are input variables in a given model. For additional information about
algorithms, consider [ES04].
Also, notice that during checking of invariants all the fairness conditions associated with
the model are ignored.
See variable use coi size sorting for changing properties verification order.
Command Options:
-n index index is the numeric index of a valid INVAR specification
formula actually located in the property database. The validity
of index value is checked out by the system.
-p "formula
[IN context]"
Checks the formula specified on the command-line.
context is the module instance name which the variables
in formula must be evaluated in.
-P "name" Checks the INVARSPEC property named name
-k max length max length is the maximum problem bound that can be
reached. Only natural numbers are valid values for this
option. If no value is given the environment variable
bmc length is considered instead.
-K step size Only for falsification: increment the search of
step size at a time. Must be greater than zero (1 by default).
-a alg alg specifies the algorithm to use. The value can be dual
or zigzag. If no value is given the environment variable
bmc inc invar alg is considered instead.
bmc invar alg Environment Variable
Sets the default algorithm used by the command check invar bmc. Possible values are
classic and een-sorensson. The default value is classic.
bmc inc invar alg Environment Variable
Sets the default algorithm used by the command check invar bmc inc. Possible values
are dual and zigzag. The default value is dual.
bmc invar dimacs filename Environment Variable
This is the default file name used when generating DIMACS invar dumps. This variable
may be taken into account by the command gen invar bmc. DIMACS file name can
contain special symbols which will be expanded to represent the actual file name. Possible
symbols are:
• @F The currently loaded model name with full path.
• @f The currently loaded model name without path part.
• @n The numerical index of the currently processed formula in the properties
database.
• @@ The ‘@’ character.
The default value is “@f invar n@n ”.
82
sat solver Environment Variable
The SAT solver’s name actually to be used. Default SAT solver is MiniSat. Depending
on the NUSMV configuration, also the Zchaff SAT solver can be available or not. Notice
that Zchaff and MiniSat are for non-commercial purposes only.. If no SAT solver has been
configured, BMC commands and environment variables will not be available.
bmc pick state - Picks a state from the set of initial states Command
bmc pick state [-h] [-v] [-c "constraint" | -s trace.state]
[-r | -i [-a]]
Chooses an element from the set of initial states, and makes it the current state (replacing
the old one). The chosen state is stored as the rst state of a new trace ready to be lengthened
by steps states by the bmc simulate command or the bmc inc simulate command.
Command Options:
-v Verbosely prints the generated trace
-c constraint Set a constraint to narrow initial states.
-s state Picks state from trace.state label.
-r Randomly picks a state from the set of initial states.
-i Enters simulation’s interactive mode.
-a Displays all the state variables (changed and unchanged) in
the interactive session
bmc simulate - Generates a trace of the model from 0 (zero) to k Command
bmc simulate [-h] [-p | -v] [-r] [[-c "constraints"] | [-t
"constraints"] ] [-k steps]
bmc simulate does not require a specification to build the problem, because only the
model is used to build it. The problem length is represented by the -k command parameter,
or by its default value stored in the environment variable bmc length.
Command Options:
-p Prints the generated trace (only changed variables).
-v Prints the generated trace (all variables).
-r Picks a state from a set of possible future states in a random
way.
-c constraint Performs a simulation in which computation is restricted
to states satisfying those constraints. The desired sequence
of states could not exist if such constraints were too
strong or it may happen that at some point of the simulation
a future state satisfying those constraints doesn’t exist: in
that case a trace with a number of states less than steps
trace is obtained. Note: constraints must be enclosed
between double quotes " ". The expression cannot contain
next operators, and is automatically shifted by one state in
order to constraint only the next steps
83
-t "constraints" Performs a simulation in which computation is restricted
to states satisfying those constraints. The desired sequence
of states could not exist if such constraints were too
strong or it may happen that at some point of the simulation
a future state satisfying those constraints doesn’t exist: in
that case a trace with a number of states less than steps
trace is obtained. Note: constraints must be enclosed
between double quotes " ". The expression can contain
next operators, and is NOT automatically shifted by one
state as done with option -c
-k steps Maximum length of the path according to the constraints.
The length of a trace could contain less than steps states:
this is the case in which simulation stops in an intermediate
step because it may not exist any future state satisfying
those constraints. The default value is determined by the
default simulation steps environment variable
bmc inc simulate - Generates a trace of the model from 0 (zero) to
k
Command
bmc inc simulate [-h] [-p | -v] [-r | -i [-a]] [[-c
"constraints"] | [-t "constraints"] ] [-k steps]
Performs incremental simulation of the model. bmc inc simulate does not require a
specification to build the problem, because only the model is used to build it. The problem
length is represented by the -k command parameter, or by its default value stored in the
environment variable bmc length.
Command Options:
-p Prints the generated trace (only changed variables).
-v Prints the generated trace (all variables).
-r Picks a state from a set of possible future states in a random
way.
-i Enters simulation’s interactive mode.
-a Displays all the state variables (changed and unchanged) in
the interactive session
-c constraint Performs a simulation in which computation is restricted
to states satisfying those constraints. The desired sequence
of states could not exist if such constraints were too
strong or it may happen that at some point of the simulation
a future state satisfying those constraints doesn’t exist: in
that case a trace with a number of states less than steps
trace is obtained. Note: constraints must be enclosed
between double quotes " ". The expression cannot contain
next operators, and is automatically shifted by one state in
order to constraint only the next steps
84
-t "constraints" Performs a simulation in which computation is restricted
to states satisfying those constraints. The desired sequence
of states could not exist if such constraints were too
strong or it may happen that at some point of the simulation
a future state satisfying those constraints doesn’t exist: in
that case a trace with a number of states less than steps
trace is obtained. Note: constraints must be enclosed
between double quotes " ". The expression can contain
next operators, and is NOT automatically shifted by one
state as done with option -c
-k steps Maximum length of the path according to the constraints.
The length of a trace could contain less than steps states:
this is the case in which simulation stops in an intermediate
step because it may not exist any future state satisfying
those constraints. The default value is determined by the
default simulation steps environment variable
bmc simulate check feasible constraints - Checks feasability for
the given constraints
Command
bmc simulate check feasible constraints [-h] [-q] [-c
"constr"]
Checks if the given constraints are feasible for BMC simulation.
Command Options:
-q Prints the output in compact form.
-c constr Specify one constraint whose feasability has to be checked
(can be used multiple times, order is important to read the
result)
3.4 Commands for checking PSL specifications
The following commands allow for model checking of PSL specifications.
check pslspec - Performs bdd-based PSL model checking Command
AI: upper
case for
”bdd” in
the label
AI: upper
case for
”bdd” in
the label
check pslspec [-h] [-m | -o output-file] [-n number | -p
"psl-expr [IN context]" | -P "name"]
Check psl properties using bdd-based model checking.
A psl-expr to be checked can be specified at command line using option -p. Alternatively,
option -n can be used for checking a particular formula in the property database. If
neither -n nor -p are used, all the PSLSPEC formulas in the database are checked.
See variable use coi size sorting for changing properties verification order.
Command Options:
-m Pipes the output generated by the command in processing
PSLSPECs to the program specified by the PAGER
shell variable if defined, else through the UNIX command
“more”.
85
-o output-file Writes the output generated by the command in processing
PSLSPEC s to the file output-file
-p "psl-expr
[IN context]"
A PSL formula to be checked. context is the module
instance name which the variables in psl-expr must be
evaluated in.
-n number Checks the PSL property with index number in the property
database.
-P name Checks the PSL property named name in the property
database.
check pslspec bmc - Performs SAT-based PSL model checking Command
check pslspec bmc [-h] [-m | -o output-file] [-n number | -p
"psl-expr [IN context]" | -P "name"] [-g] [-1] [-k
bmc lenght] [-l loopback]
Check psl properties using SAT-based model checking.
A psl-expr to be checked can be specified at command line using option -p. Alternatively,
option -n can be used for checking a particular formula in the property database. If
neither -n nor -p are used, all the PSLSPEC formulas in the database are checked. Options
-k and -l can be used to define the maximum problem bound, and the value of the
loopback for the single generated problems respectively; their values can be stored in the
environment variables bmc lenght and bmc loopback. Single problems can be generated
by using option -1. Bounded model checking problems can be generated and dumped in
a file by using option -g.
See variable use coi size sorting for changing properties verification order.
Command Options:
-m Pipes the output generated by the command in processing
PSLSPECs to the program specified by the PAGER
shell variable if defined, else through the UNIX command
“more”.
-o output-file Writes the output generated by the command in processing
PSLSPEC s to the file output-file
-p "psl-expr
[IN context]"
A PSL formula to be checked. context is the module
instance name which the variables in psl-expr must be
evaluated in.
-n number Checks the PSL property with index number in the property
database.
-P name Checks the PSL property named name in the property
database.
-g Dumps DIMACS version of bounded model checking problem
into a file whose name depends on the system variable
bmc dimacs filename. This feature is not allowed in
combination of the option -i.
86
-1 Generates a single bounded model checking problem with
fixed bound and loopback values, it does not iterate incrementing
the value of the problem bound.
-k bmc length bmc length is the maximum problem bound to be checked.
Only natural numbers are valid values for this option. If no
value is given the environment variable bmc length is considered
instead.
-l loopback The loopback value may be:
• a natural number in (0, max length-1). A positive sign
(‘+’) can be also used as prefix of the number. Any invalid
combination of length and loopback will be skipped
during the generation/solving process.
• a negative number in (-1, -bmc length). In this case loopback
is considered a value relative to max length. Any invalid
combination of length and loopback will be skipped
during the generation/solving process.
• the symbol ‘X’, which means “no loopback”.
• the symbol ‘*’, which means “all possible loopbacks from
zero to length-1”. If no value is given the environment
variable bmc loopback is considered instead.
check pslspec bmc inc - Performs incremental SAT-based PSL
model checking
Command
check pslspec bmc inc [-h] [-m | -o output-file] [-n number |
-p
"psl-expr [IN context]" | -P "name"] [-1] [-k
bmc lenght] [-l loopback]
Check psl properties using incremental SAT-based model checking.
A psl-expr to be checked can be specified at command line using option -p. Alternatively,
option -n can be used for checking a particular formula in the property database. If
neither -n nor -p are used, all the PSLSPEC formulas in the database are checked. Options
-k and -l can be used to define the maximum problem bound, and the value of the
loopback for the single generated problems respectively; their values can be stored in the
environment variables bmc lenght and bmc loopback. Single problems can be generated
by using option -1. Bounded model checking problems can be generated and dumped in
a file by using option -g.
See variable use coi size sorting for changing properties verification order.
Command Options:
-m Pipes the output generated by the command in processing
PSLSPECs to the program specified by the PAGER
shell variable if defined, else through the UNIX command
“more”.
-o output-file Writes the output generated by the command in processing
PSLSPEC s to the file output-file
-p "psl-expr
[IN context]"
A PSL formula to be checked. context is the module
instance name which the variables in psl-expr must be
evaluated in.
87
-n number Checks the PSL property with index number in the property
database.
-P name Checks the PSL property named name in the property
database.
-1 Generates a single bounded model checking problem with
fixed bound and loopback values, it does not iterate incrementing
the value of the problem bound.
-k bmc length bmc length is the maximum problem bound to be checked.
Only natural numbers are valid values for this option. If no
value is given the environment variable bmc length is considered
instead.
-l loopback The loopback value may be:
• a natural number in (0, max length-1). A positive sign
(‘+’) can be also used as prefix of the number. Any invalid
combination of length and loopback will be skipped
during the generation/solving process.
• a negative number in (-1, -bmc length). In this case loopback
is considered a value relative to max length. Any invalid
combination of length and loopback will be skipped
during the generation/solving process.
• the symbol ‘X’, which means “no loopback”.
• the symbol ‘*’, which means “all possible loopbacks from
zero to length-1”. If no value is given the environment
variable bmc loopback is considered instead.
check pslspec sbmc - Performs SAT-based PSL model checking Command
check pslspec sbmc [-h] [-m | -o output-file] [-n number |
-p
"psl-expr [IN context]" | -P "name"] [-g] [-1] [-k
bmc lenght] [-l loopback]
Check psl properties using SAT-based model checking. Use the SBMC algorithms.
A psl-expr to be checked can be specified at command line using option -p. Alternatively,
option -n can be used for checking a particular formula in the property database. If
neither -n nor -p are used, all the PSLSPEC formulas in the database are checked. Options
-k and -l can be used to define the maximum problem bound, and the value of the
loopback for the single generated problems respectively; their values can be stored in the
environment variables bmc lenght and bmc loopback. Single problems can be generated
by using option -1. Bounded model checking problems can be generated and dumped in
a file by using option -g.
See variable use coi size sorting for changing properties verification order.
Command Options:
-m Pipes the output generated by the command in processing
PSLSPECs to the program specified by the PAGER
shell variable if defined, else through the UNIX command
“more”.
88
-o output-file Writes the output generated by the command in processing
PSLSPEC s to the file output-file
-p "psl-expr
[IN context]"
A PSL formula to be checked. context is the module
instance name which the variables in psl-expr must be
evaluated in.
-n number Checks the PSL property with index number in the property
database.
-P name Checks the PSL property named name in the property
database.
-g Dumps DIMACS version of bounded model checking problem
into a file whose name depends on the system variable
bmc dimacs filename. This feature is not allowed in
combination of the option -i.
-1 Generates a single bounded model checking problem with
fixed bound and loopback values, it does not iterate incrementing
the value of the problem bound.
-k bmc length bmc length is the maximum problem bound to be checked.
Only natural numbers are valid values for this option. If no
value is given the environment variable bmc length is considered
instead.
-l loopback The loopback value may be:
• a natural number in (0, max length-1). A positive sign
(‘+’) can be also used as prefix of the number. Any invalid
combination of length and loopback will be skipped
during the generation/solving process.
• a negative number in (-1, -bmc length). In this case loopback
is considered a value relative to max length. Any invalid
combination of length and loopback will be skipped
during the generation/solving process.
• the symbol ‘X’, which means “no loopback”.
• the symbol ‘*’, which means “all possible loopbacks from
zero to length-1”. If no value is given the environment
variable bmc loopback is considered instead.
check pslspec sbmc inc - Performs incremental SAT-based PSL
model checking
Command
check pslspec sbmc inc [-h] [-m | -o output-file] [-n number
| -p
"psl-expr [IN context]" | -P "name"] [-1] [-k
bmc lenght] [-l loopback] [-c] [-N]
Check psl properties using incremental SAT-based model checking. Use the SBMC algo-
rithms.
A psl-expr to be checked can be specified at command line using option -p. Alternatively,
option -n can be used for checking a particular formula in the property database. If
neither -n nor -p are used, all the PSLSPEC formulas in the database are checked. Options
-k and -l can be used to define the maximum problem bound, and the value of the
loopback for the single generated problems respectively; their values can be stored in the
environment variables bmc lenght and bmc loopback. Single problems can be generated
by using option -1. Bounded model checking problems can be generated and dumped in
a file by using option -g. With the option -c is possible to perform a completeness check,
while with the option -N is possible to disable the virtual unrolling.
89
See variable use coi size sorting for changing properties verification order.
Command Options:
-m Pipes the output generated by the command in processing
PSLSPECs to the program specified by the PAGER
shell variable if defined, else through the UNIX command
“more”.
-o output-file Writes the output generated by the command in processing
PSLSPEC s to the file output-file
-p "psl-expr
[IN context]"
A PSL formula to be checked. context is the module
instance name which the variables in psl-expr must be
evaluated in.
-n number Checks the PSL property with index number in the property
database.
-P name Checks the PSL property named name in the property
database.
-1 Generates a single bounded model checking problem with
fixed bound and loopback values, it does not iterate incrementing
the value of the problem bound.
-k bmc length bmc length is the maximum problem bound to be checked.
Only natural numbers are valid values for this option. If no
value is given the environment variable bmc length is considered
instead.
-l loopback The loopback value may be:
• a natural number in (0, max length-1). A positive sign
(‘+’) can be also used as prefix of the number. Any invalid
combination of length and loopback will be skipped
during the generation/solving process.
• a negative number in (-1, -bmc length). In this case loopback
is considered a value relative to max length. Any invalid
combination of length and loopback will be skipped
during the generation/solving process.
• the symbol ‘X’, which means “no loopback”.
• the symbol ‘*’, which means “all possible loopbacks from
zero to length-1”. If no value is given the environment
variable bmc loopback is considered instead.
-c Performs completeness check.
-N Does not perform virtual unrolling.
3.5 Simulation Commands
In this section we describe the commands that allow to simulate a NUSMV specification. See
also the section Section 3.7 [Traces], page 94 that describes the commands available for manipulating
traces.
pick state - Picks a state from the set of initial states Command
pick state [-h] [-v] [-r | -i [-a]] [-c "constraints" | -s
trace.state]
90
Chooses an element from the set of initial states, and makes it the current state
(replacing the old one). The chosen state is stored as the first state of a new trace ready to
be lengthened by steps states by the simulate command. The state can be chosen
according to different policies which can be specified via command line options. By
default the state is chosen in a deterministic way.
Command Options:
-v Verbosely prints out chosen state (all state and frozen variables,
otherwise it prints out only the label t.1 of the state
chosen, where t is the number of the new trace, that is the
number of traces so far generated plus one).
-r Randomly picks a state from the set of initial states.
-i Enables the user to interactively pick up an initial state. The
user is requested to choose a state from a list of possible
items (every item in the list doesn’t show frozen and state
variables unchanged with respect to a previous item). If the
number of possible states is too high, then the user has to
specify some further constraints as “simple expression”.
-a Displays all state and frozen variables (changed and unchanged
with respect to a previous item) in an interactive
picking. This option works only if the -i options has been
specified.
-c "constraints" Uses constraints to restrict the set of initial states in
which the state has to be picked. constraints must be
enclosed between double quotes " ".
-s trace.state Picks state from trace.state label. A new simulation trace
will be created by copying prefix of the source trace up to
specified state.
simulate - Performs a simulation from the current selected state Command
simulate [-h] [-p | -v] [-r | -i [-a]] [-c "constraints" |
-t "constraints"] [-k steps]
Generates a sequence of at most steps states (representing a possible execution of
the model), starting from the current state. The current state must be set via the
pick state or goto state commands.
It is possible to run the simulation in three ways (according to different command line
policies): deterministic (the default mode), random and interactive.
The resulting sequence is stored in a trace indexed with an integer number taking into
account the total number of traces stored in the system. There is a different behavior in
the way traces are built, according to how current state is set: current state is always put
at the beginning of a new trace (so it will contain at most steps + 1 states) except when it
is the last state of an existent old trace. In this case the old trace is lengthened by at most
steps states.
Command Options:
-p Prints current generated trace (only those variables whose
value changed from the previous state).
91
-v Verbosely prints current generated trace (changed and unchanged
state and frozen variables).
-r Picks a state from a set of possible future states in a random
way.
-i Enables the user to interactively choose every state of the
trace, step by step. If the number of possible states is too
high, then the user has to specify some constraints as simple
expression. These constraints are used only for a single simulation
step and are forgotten in the following ones. They
are to be intended in an opposite way with respect to those
constraints eventually entered with the pick state command,
or during an interactive simulation session (when the
number of future states to be displayed is too high), that are
local only to a single step of the simulation and are forgotten
in the next one.
To improve readability of the list of the states which the user
must pick one from, each state is presented in terms of difference
with respect of the previous one.
-a Displays all the state and frozen variables (changed and unchanged)
during every step of an interactive session. This
option works only if the -i option has been specified.
-c "constraints" Performs a simulation in which computation is restricted
to states satisfying those constraints. The desired sequence
of states could not exist if such constraints were too
strong or it may happen that at some point of the simulation
a future state satisfying those constraints doesn’t exist: in
that case a trace with a number of states less than steps
trace is obtained. Note: constraints must be enclosed
between double quotes " ". The expression cannot contain
next operators, and is automatically shifted by one state in
order to constraint only the next steps
-t "constraints" Performs a simulation in which computation is restricted
to states satisfying those constraints. The desired sequence
of states could not exist if such constraints were too
strong or it may happen that at some point of the simulation
a future state satisfying those constraints doesn’t exist: in
that case a trace with a number of states less than steps
trace is obtained. Note: constraints must be enclosed
between double quotes " ". The expression can contain
next operators, and is NOT automatically shifted by one
state as done with option -c
92
-k steps Maximum length of the path according to the constraints.
The length of a trace could contain less than steps states:
this is the case in which simulation stops in an intermediate
step because it may not exist any future state satisfying
those constraints. The default value is determined by the
default simulation steps environment variable
default simulation steps Environment Variable
Controls the default number of steps performed by all simulation commands. The default
is 10.
shown states Environment Variable
Controls the maximum number of states tail will be shown during an interactive simulation
session. Possible values are integers from 1 to 100. The default value is 25.
traces hiding prefix Environment Variable
see section 3.7.2 for a detailed description.
traces regexp Environment Variable
see section 3.7.2 for a detailed description.
3.6 Execution Commands
In this section we describe the commands that allow to perform trace re-execution on a given
model. See also the section Section 3.7 [Traces], page 94 that describes the commands available
for manipulating traces.
execute traces - Executes complete traces on the model FSM Command
execute traces [-h] [-v] [-m | -o output-file] -e engine [-a
| trace number]
Executes traces stored in the Trace Manager. If no trace is specified, last registered trace
is executed. Traces must be complete in order to perform execution.
Command Options:
-v Verbosely prints traces execution steps.
-a Prints all the currently stored traces.
-m Pipes the output through the program specified by the
PAGER shell variable if defined, else through the UNIX
command “more”.
-o output-file Writes the output generated by the command to
output-file.
-e engine Selects an engine for trace re-execution. It must be one of
’bdd’, ’sat’ or ’smt’.
93
trace number The (ordinal) identifier number of the trace to be printed.
This must be the last argument of the command. Omitting
the trace number causes the most recently generated trace to
be executed.
execute partial traces - Executes partial traces on the model FSM Command
execute partial traces [-h] [-v] [-r] [-m | -o output-file]
-e engine [-a | trace number]
Executes traces stored in the Trace Manager. If no trace is specified, last registered trace
is executed. Traces are not required to be complete. Upon succesful termination, a new
complete trace is registered in the Trace Manager.
Command Options:
-v Verbosely prints traces execution steps.
-a Prints all the currently stored traces.
-r Performs restart on complete states. When a complete state
(i.e. a state which is non-ambiguosly determined by a complete
assignment to state variables) is encountered, the reexecution
algorithm is re-initialized, thus reducing computation
time.
-m Pipes the output through the program specified by the
PAGER shell variable if defined, else through the UNIX
command “more”.
-o output-file Writes the output generated by the command to
output-file.
-e engine Selects an engine for trace re-execution. It must be one of
’bdd’, ’sat’ or ’smt’.
trace number The (ordinal) identifier number of the trace to be printed.
This must be the last argument of the command. Omitting
the trace number causes the most recently generated trace to
be executed.
3.7 Traces
A trace consists of an initial state, optionally followed by a sequence of states-inputs pairs
corresponding to a possible execution of the model. Apart, from the initial state, each pair
contains the inputs that caused the transition to the new state, and the new state itself. The
initial state has no such input values defined as it does not depend on the values of any of the
inputs. The values of any constants declared in DEFINE sections are also part of a trace. If
the value of a constant depends only on state and frozen variables then it will be treated as if it
is a state variable too. If it depends only on input variables then it will be treated as if it is an
input variable. If however, a constant depends upon both input and state/frozen variables and/or
NEXTed state variables, then it gets displayed in a separate “combinatorial” section. Since the
values of any such constants depend on one or more inputs, the initial state does not contain this
section either.
Traces are created by NUSMV when a formula is found to be false; they are also generated
as a result of a simulation (Section 3.5 [Simulation Commands], page 90) or partial trace
re-execution (Section 3.6 [Execution Commands], page 93). Each trace has a number, and the
94
states-inputs pairs are numbered within the trace. Trace n has states/inputs n.1, n.2, n.3, ”...”
where n.1 represents the initial state.
When Cone of Influence (COI) is enabled when generating a trace (e.g. when performing
model checking), the generated trace will contain only the relevant symbols (variables and DEFINEs)
which are in the COI projected by the variables occurring in the property which is being
checked. The symbols which are left out of the COI, will be not visible in the generated trace,
as they do not occur in the problem encoded in the solving engine. Notice that when COI is
enabled, the generated trace may or may not be a valid counter-example trace for the original
model.
3.7.1 Inspecting Traces
The trace inspection commands of NUSMV allow for navigation along the labelled states-inputs
pairs of the traces produced. During the navigation, there is a current state, and the current trace
is the trace the current state belongs to. The commands are the following:
goto state - Goes to a given state of a trace Command
goto state [-h] state label
Makes state label the current state. This command is used to navigate along traces
produced by NUSMV. During the navigation, there is a current state, and the current trace
is the trace the current state belongs to.
state label is in the form trace.state where
trace is the index of the trace which the state has to be taken from.
state is the index of the state within the given trace. If state is a negative number, then
the state index is intended to be relative to the length of the given trace. For example
2.-1 means the last state of the trace 2. 2.-2 is the state before the last state, etc.
print current state - Prints out the current state Command
print current state [-h] [-v]
Prints the name of the current state if defined.
Command Options:
-v Prints the value of all the state and frozen variables of the
current state.
3.7.2 Displaying Traces
NUSMV comes with three trace plugins (see Section 3.8 [Trace Plugins], page 98) which can be
used to display traces in the system. Once a trace has been generated by NUSMV it is printed
to stdout using the trace explanation plugin which has been set as the current default. The
command show traces (see Section 3.5 [Simulation Commands], page 90) can then be used
to print out one or more traces using a different trace plugin, as well as allowing for output to a
file.
Generation and displaying of traces can be enabled/disabled by setting variable
counter examples. Some filtering of symbols that are presented when showing traces can
be controlled by variables traces hiding prefix and traces regexp.
counter examples Environment Variable
95
This determines whether traces are generated when needed. See also command line option
-dcx.
traces hiding prefix Environment Variable
Symbols names that match this string prefix will be not printed out when showing a trace.
This variable may be used to avoid displaying symbols that are expected to be not visible
to the user. For example, this variable is exploited when dumping booleanized models,
as NUSMV may introduce hidden placeholding symbols as DEFINES that do not carry
any useful information for the user, and that would make traces hardly readable if printed.
Default is
traces regexp Environment Variable
Only symbols whose names match this regular expression will be printed out when showing
a trace. This option might be used by users that are interested in showing only
some symbol names. Names are first filtered out by applying matching of the dual variable
traces hiding prefix, and then filtered names are checked against content of
traces regexp. Given regular expression can be a Posix Basic Regular Expression.
Matching is carried out on symbol names without any contextual information, like module
hierarchy. For example in m1.m2.name only name is checked for filtering.
Notice that depending on the underlaying platform and operating system this variable
might be not available.
show defines in traces Environment Variable
Controls whether defines should be printed as part of a trace or be skipped. Skipping
printing of the defines can help in reducing time and memory usage required to build very
big traces.
traces show defines with next Environment Variable
Controls whether defines containing next operators should be printed as part of a trace or
be skipped.
3.7.3 Trace Plugin Commands
The following commands relate to the plugins which are available in NUSMV.
show plugins - Shows the available trace explanation plugins Command
show plugins [-h] [-n plugin-no | -a]
Command Options:
-n plugin-no Shows the plugin with the index number equal to
plugin-no.
-a Shows all the available plugins.
Shows the available plugins that can be used to display a trace which has been generated
by NUSMV, or that has been loaded with the read trace command. The plugin that is
used to read in a trace is also shown. The current default plugin is marked with “[D]”.
All the available plugins are displayed by default if no command options are given.
default trace plugin Environment Variable
96
This determines which trace plugin will be used by default when traces that are generated
by NUSMV are to be shown. The values that this variable can take depend on which trace
plugins are installed. Use the command show plugins to see which ones are available.
The default value is 0.
show traces - Shows the traces generated in a NuSMV session Command
show traces [-h] [-v] [-t] [-A] [-m | -o output-file]
[-p plugin-no] [-a | trace number[.from state[:[to state]]]
Command Options:
-v Verbosely prints traces content (all state and frozen variables,
otherwise it prints out only those variables that have
changed their value from previous state). This option only
applies when the Basic Trace Explainer plugin is used to
display the trace.
-t Prints only the total number of currently stored traces.
-a Prints all the currently stored traces.
-m Pipes the output through the program specified by the
PAGER shell variable if defined, else through the UNIX
command “more”.
-o output-file Writes the output generated by the command to
output-file.
-p plugin-no Uses the specified trace plugin to display the trace.
trace number The (ordinal) identifier number of the trace to be printed.
Omitting the trace number causes the most recently generated
trace to be printed.
from step The number of the first step of the trace to be printed. Negative
numbers can be used to denote right-to-left indexes from
the last step.
to step The number of the trace to be printed. Negative numbers
can be used to denote right-to-left indexes from the last step.
Omitting this parameter causes the entire suffix of the trace
to be printed.
-A Prints the trace(s) using a rewriting mapping for all symbols.
The rewriting is the same used in write flat model
with option -A.
Shows the traces currently stored in system memory, if any. By default it shows the last
generated trace, if any. Optional trace number can be followed by two indexes (from state,
to state), denoting a trace “slice”. Thus, it is possible to require printout only of an arbitrary
fragment of the trace (this can be helpful when inspecting very big traces).
If the XML Format Output plugin is being used to save generated traces to a file with the
intent of reading them back in again at a later date, then only one trace should be saved per
file. This is because the trace reader does not currently support multiple traces in one file.
read trace - Loads a previously saved trace Command
read trace [-h | [-i filename] [-u] [-s] filename]
97
Command Options:
-i filename Reads in a trace from the specified file. Note that the file
must only contain one trace. This option has been deprecated.
Use the explicit filename argument instead.
-u Turns “undefined symbol” error into a warning. The loader
will ignore assignments to undefined symbols.
-s Turns “wrong section” error into a warning. The loader
will accept symbol assignment even if they are in a different
section than expected. Assignments will be silently moved
to appropriate section, i.e. misplaced assignments to state
symbols will be moved back to previous state section and
assignments to input/combinatorial symbols will be moved
forward to successive input/combinatorial section. Such a
way if a variable in a model was input and became state or
vice versa the existing traces still can be read and executed.
Loads a trace which has been previously output to a file with the XML Format Output
plugin. The model from which the trace was originally generated must be loaded and built
using the command “go” first.
Please note that this command is only available on systems that have the libxml2 XML
parser library installed.
3.8 Trace Plugins
NUSMV comes with three plugins which can be used to display a trace that has been generated:
Basic Trace Explainer
States/Variables Table
XML Format Printer
Empty Trace
There is also an xml loader which can read in any trace which has been output to a file by
the XML Format Printer. Note however that this loader is only available on systems that have
the libxml2 XML parser library installed.
Once a trace has been generated it is output to stdout using the currently selected plugin.
The command show traces can be used to output any previuosly generated, or loaded,
trace to a specific file.
3.8.1 Basic Trace Explainer
This plugin prints out each state (the current values of the variables) in the trace, one after the
other. The initial state contains all the state and frozen variables and their initial values. States
are numbered in the following fashion:
trace number.state number
There is the option of printing out the value of every variable in each state, or just those
which have changed from the previous one. The one that is used can be chosen by selecting the
appropriate trace plugin. The values of any constants which depend on both input and state or
frozen variables are printed next. It then prints the set of inputs which cause the transition to a
new state (if the model contains inputs), before actually printing the new state itself. The set of
inputs and the subsequent state have the same number associated to them.
98
In the case of a looping trace, if the next state to be printed is the same as the last state in the
trace, a line is printed stating that this is the point where the loop begins.
With the exception of the initial state, for which no input values are printed, the output syntax
for each state is as follows:
-> Input: TRACE_NO.STATE_NO </*
for each input var (being printed), i: */
INPUT_VARi = VALUE
-> State: TRACE_NO.STATE_NO </*
for each state and frozen var (being printed), j: */
STATE_VARj = VALUE
/* for each combinatorial constant (being printed), k: */
CONSTANTk = VALUE
where INPUT VAR, STATE VAR and CONSTANT have the relevant module names
prepended to them (seperated by a period) with the exception of the module “main” .
The version of this plugin which only prints out those variables whose values have changed
is the initial default plugin used by NUSMV.
3.8.2 States/Variables Table
This trace plugin prints out the trace as a table, with the states on each row, or in each column,
or in a compact way. The entries along the state axis are:
S1 C2 I2 S2 ... Cn In Sn
where S1 is the initial state, and Ii gives the values of the input variables which caused the
transition from state Si−1 to state Si. Ci gives the values of any combinatorial constants, where
the value depends on the values of the state or frozen variables in state Si−1 and the values of
input variables in state Si.
The variables in the model are placed along the other axis. Only the values of state and
frozen variables are displayed in the State row/column, only the values of input variables are
displayed in the Input row/column and only the values of combinatorial constants are displayed
in the Constants row/column. All remaining cells have ’-’ displayed.
The compact version has the states on the rows and no distinction is made between variables:
Step1 Step2 ... Stepn
3.8.3 XML Format Printer
This plugin prints out the trace either to stdout or to a specified file using the command
show traces. If traces are to be output to a file with the intention of them being loaded
again at a later date, then each trace must be saved in a separate file. This is because the XML
Reader plugin does not currently support multiple traces per file.
The format of a dumped XML trace file is as follows:
<?XML_VERSION_STRING?>
<counter-example type=TRACE_TYPE desc=TRACE_DESC>
/* for each state, i: */
<node>
<state id=i>
/* for each state and frozen var, j: */
<value variable=j>VALUE</value>
99
</state>
<combinatorial id=i+1>
/* for each combinatorial constant, k: */
<value variable=k>VALUE</value>
</combinatorial>
<input id=i+1>
/* for each input var, l: */
<value variable=l>VALUE</value>
</input>
</node>
</counter-example>
Note that for the last state in the trace, there is no input section in the node tags. This is
because the inputs section gives the new input values which cause the transition to the next state
in the trace. There is also no combinatorial section as this depends on the values of the inputs
and are therefore undefined when there are no inputs.
3.8.4 XML Format Reader
This plugin makes use of the libxml2 XML parser library and as such can only be used on
systems where this library is available. Previously generated traces for a given model can be
loaded using this plugin provided that the original model file1
has been loaded, and built using
the command go.
When a trace is loaded, it is given the smallest available trace number to identify it. It can
then be manipulated in the same way as any generated trace.
3.8.5 Empty Trace
This plugin simply disables trace printing. Traces are still computed and stored: unset system
option counter examples for performance gain if traces are of no interest.
3.9 Interface to the DD Package
NUSMV uses the state of the art BDD package CUDD [Som98]. Control over the BDD package
can be very important to tune the performance of the system. In particular, the order of variables
is critical to control the memory and the time required by operations over BDDs. Reordering
methods can be activated to determine better variable orders, in order to reduce the size of the
existing BDDs.
Reordering of the variables can be triggered in two ways: by the user, or by the
BDD package. In the first way, reordering is triggered by the interactive shell command
dynamic var ordering with the -f option.
Reordering is triggered by the BDD package when the number of nodes reaches a given
threshold. The threshold is initialized and automatically adjusted after each reordering by the
package. This is called dynamic reordering, and can be enabled or disabled by the user. Dynamic
1To be exact, M1 ⊆ M2, where M1 is the model from which the trace was generated, and M2 is the
currently loaded, and built, model. Note however, that this may mean that the trace is not valid for the model
M2.
100
reordering is enabled with the shell command dynamic var ordering with the option -e,
and disabled with the -d option. Variable dynamic reorder can also be used to determine
whether dynamic reordering is active. If dynamic reordering is enabled it may be beneficial also
to disable BDD caching by unsetting variable enable sexp2bdd caching.
dynamic reorder Environment Variable
Determines whether dynamic reordering is active. If this variable is set, dynamic reordering
will take place as described above. If not set (default), no dynamic reordering will
occur. This variable can also be set by passing -dynamic command line option when
invoking NUSMV.
reorder method Environment Variable
Specifies the ordering method to be used when dynamic variable reordering is fired. The
possible values, corresponding to the reordering methods available with the CUDD package,
are listed below. The default value is sift.
sift: Moves each variable throughout the order to find an optimal
position for that variable (assuming all other variables
are fixed). This generally achieves greater size reductions
than the window method, but is slower.
random: Pairs of variables are randomly chosen, and swapped in
the order. The swap is performed by a series of swaps of
adjacent variables. The best order among those obtained
by the series of swaps is retained. The number of pairs
chosen for swapping equals the number of variables in the
diagram.
random pivot: Same as random, but the two variables are chosen so
that the first is above the variable with the largest number
of nodes, and the second is below that variable. In case
there are several variables tied for the maximum number
of nodes, the one closest to the root is used.
sift converge: The sift method is iterated until no further improvement
is obtained.
symmetry sift: This method is an implementation of symmetric sifting. It
is similar to sifting, with one addition: Variables that become
adjacent during sifting are tested for symmetry. If
they are symmetric, they are linked in a group. Sifting
then continues with a group being moved, instead of a single
variable.
symmetry sift converge: The symmetry sift method is iterated until no further
improvement is obtained.
window2:
window3:
window4: Permutes the variables within windows of n adjacent variables,
where n can be either 2, 3 or 4, so as to minimize the
overall BDD size.
101
window2 converge:
window3 converge:
window4 converge: The window{2,3,4} method is iterated until no further
improvement is obtained.
group sift: This method is similar to symmetry sift, but uses
more general criteria to create groups.
group sift converge: The group sift method is iterated until no further improvement
is obtained.
annealing: This method is an implementation of simulated annealing
for variable ordering. This method is potentially very slow.
genetic: This method is an implementation of a genetic algorithm
for variable ordering. This method is potentially very slow.
exact: This method implements a dynamic programming approach
to exact reordering. It only stores one BDD at a
time. Therefore, it is relatively efficient in terms of memory.
Compared to other reordering strategies, it is very
slow, and is not recommended for more than 16 boolean
variables.
linear: This method is a combination of sifting and linear
transformations.
linear conv: The linear method is iterated until no further improvement
is obtained.
dynamic var ordering - Deals with the dynamic variable order-
ing.
Command
dynamic var ordering [-d] [-e <method>] [-f <method>] [-h]
Controls the application and the modalities of (dynamic) variable ordering. Dynamic
ordering is a technique to reorder the BDD variables to reduce the size of the existing
BDDs. When no options are specified, the current status of dynamic ordering is displayed.
At most one of the options -e, -f, and -d should be specified. Dynamic ordering may
be time consuming, but can often reduce the size of the BDDs dramatically. A good
point to invoke dynamic ordering explicitly (using the -f option) is after the commands
build model, once the transition relation has been built. It is possible to save the
ordering found using write order in order to reuse it (using build model -i
order-file) in the future.
Command Options:
-d Disable dynamic ordering from triggering automatically.
-e <method> Enable dynamic ordering to trigger automatically whenever
a certain threshold on the overall BDD size is reached.
<method> must be one of the following:
• sift: Moves each variable throughout the order to find an
optimal position for that variable (assuming all other variables
are fixed). This generally achieves greater size reductions
than the window method, but is slower.
102
• random: Pairs of variables are randomly chosen, and
swapped in the order. The swap is performed by a series of
swaps of adjacent variables. The best order among those
obtained by the series of swaps is retained. The number of
pairs chosen for swapping equals the number of variables
in the diagram.
• random pivot: Same as random, but the two variables
are chosen so that the first is above the variable with the
largest number of nodes, and the second is below that variable.
In case there are several variables tied for the maximum
number of nodes, the one closest to the root is used.
• sift converge: The sift method is iterated until no further
improvement is obtained.
• symmetry sift: This method is an implementation of symmetric
sifting. It is similar to sifting, with one addition:
Variables that become adjacent during sifting are tested
for symmetry. If they are symmetric, they are linked in
a group. Sifting then continues with a group being moved,
instead of a single variable.
• symmetry sift converge: The symmetry sift method is
iterated until no further improvement is obtained.
• window{2,3,4}: Permutes the variables within windows
of ”n” adjacent variables, where ”n” can be either 2, 3 or
4, so as to minimize the overall BDD size.
• window{2,3,4} converge: The window{2,3,4} method is
iterated until no further improvement is obtained.
• group sift: This method is similar to symmetry sift, but
uses more general criteria to create groups.
• group sift converge: The group sift method is iterated
until no further improvement is obtained.
• annealing: This method is an implementation of simulated
annealing for variable ordering. This method is potentially
very slow.
• genetic: This method is an implementation of a genetic
algorithm for variable ordering. This method is potentially
very slow.
• exact: This method implements a dynamic programming
approach to exact reordering. It only stores a BDD at a
time. Therefore, it is relatively efficient in terms of memory.
Compared to other reordering strategies, it is very
slow, and is not recommended for more than 16 boolean
variables.
• linear: This method is a combination of sifting and linear
transformations.
• linear converge: The linear method is iterated until no
further improvement is obtained.
-f <method> Force dynamic ordering to be invoked immediately. The values
for <method> are the same as in option -e.
clean sexp2bdd cache - Cleans the cached results of evaluations
of symbolic expressions to ADD and BDD representations.
Command
clean sexp2bdd cache [-h]
103
During conversion of symbolic expressions to ADD and BDD representations the results
of evaluations are normally cached (see additionally the environment variable
enable sexp2bdd caching). This allows to save time by avoid the construction of
BDD for the same symbolic expression several time.
In some situations it may be preferable to clean the cache and free collected ADD and
BDD. This operation can be done, for example, to free some memory. Another possible
reason is that dynamic reordering may modify all existing BDDs, and cleaning the cache
thereby freeing the BDD may speed up the reordering.
This command is designed specifically to free the internal cache of evaluated expressions
and their ADDs and BDDs. Note that only the cache of symbolic-expression-to-bdd evaluator
is freed. BDDs of variables, constants and expressions collected in BDD FSM or
anywhere else are not freed.
print formula - Prints a formula in canonical format. Command
print formula [-h] [-v] [-f] "expression"
Prints the number of satsfying assignments for the given formula. In verbose mode, prints
also the list of such assigments. In formula mode, a canonical representation of the formula
is printed.
Command Options:
-v Prints explicit models of the formula.
-f Prints the simplified and canonical formula.
enable sexp2bdd caching Environment Variable
This variable determines if during evaluation of symbolic expression to ADD and BDD
representations the obtained results are cached or not. Note that if the variable is set down
consequently computed results are not cached but the previously cached data remain unmodified
and will be used during later evaluations.
The default value of this variable is 1 which can be changed by a command line option
-disable sexp2bdd caching.
For more information about the reasons of why BDD cache should be disabled in some
situations see command clean sexp2bdd cache.
print bdd stats - Prints out the BDD statistics and parameters Command
print bdd stats [-h]
Prints the statistics for the BDD package. The amount of information depends on the
BDD package configuration established at compilation time. The configurtion parameters
are printed out too. More information about statistics and parameters can be found in the
documentation of the CUDD Decision Diagram package.
set bdd parameters - Creates a table with the value of all currently
active NuSMV flags and change accordingly the configurable
parameters of the BDD package.
Command
set bdd parameters [-h] [-s]
104
Applies the variables table of the NUSMV environnement to the BDD package, so the
user can set specific BDD parameters to the given value. This command works in conjunction
with the print bdd stats and set commands. print bdd stats first
prints a report of the parameters and statistics of the current bdd manager. By using the
command set, the user may modify the value of any of the parameters of the underlying
BDD package. The way to do it is by setting a value in the variable BDD.parameter
name where parameter name is the name of the parameter exactly as printed by the
print bdd stats command.
Command Options:
-s Prints the BDD parameter and statistics after the
modification.
3.10 Administration Commands
This section describes the administrative commands offered by the interactive shell of NUSMV.
! - shell command Command
“! ” executes a shell command. The “shell command” is executed by calling “bin/sh -c
shell command”. If the command does not exists or you have not the right to execute it,
then an error message is printed.
alias - Provides an alias for a command Command
alias [-h] [<name> [<string>]]
The alias command, if given no arguments, will print the definition of all current
aliases. Given a single argument, it will print the definition of that alias (if any). Given two
arguments, the keyword <name> becomes an alias for the command string <string>,
replacing any other alias with the same name.
Command Options:
<name> Alias
<string> Command string
It is possible to create aliases that take arguments by using the history substitution
mechanism. To protect the history substitution character ‘ %’ from immediate expansion,
it must be preceded by a ‘ \’ when entering the alias.
For example:
105
NuSMV> alias read "read model -i %:1.smv ; set
input order file %:1.ord"
NuSMV> read short
will create an alias ‘read’, execute ”read model -i short.smv; set input order file
short.ord”. And again:
NuSMV> alias echo2 "echo Hi ; echo %* !"
NuSMV> echo2 happy birthday
will print:
Hi
happy birthday !
CAVEAT: Currently there is no check to see if there is a circular dependency in the alias
definition. e.g.
NuSMV> alias foo "echo print bdd stats; foo"
creates an alias which refers to itself. Executing the command foo will result an infinite
loop during which the command print bdd stats will be executed.
echo - Merely echoes the arguments Command
echo [-h] [-2] [-n] [-o filename [-a]] <string>
Echoes the specified string either to standard output, or to filename if the option -o is
specified.
Command Options:
-2 Redirects output to the standard error instead of the standard
output. This cannot be used in combination with the option
-o.
-n Does not output the trailing newline.
-o filename Echoes to the specified filename instead of to standard output.
If the option -a is not specified, the file filename
will be overwritten if it already exists.
-a Appends the output to the file specified by option -o, instead
of overwritting it. Use only with the option -o.
help - Provides on-line information on commands Command
help [-h] [-a] [-p] [<command>]
If invoked with no arguments help prints the list of all commands known to the command
interpreter. If a command name is given, detailed information for that command will be
provided.
Command Options:
-a Provides a list of all internal commands, whose names begin
with the underscore character (’ ’) by convention.
-p Disables the use of a pager like “more” or any set in environment
variable PAGER.
history - list previous commands and their event numbers Command
history [-h] [<num>]
Lists previous commands and their event numbers. This is a UNIX-like history mechanism
inside the NUSMV shell.
106
Command Options:
<num> Lists the last <num> events. Lists the last 30 events if
<num> is not specified.
History Substitution:
The history substitution mechanism is a simpler version of the csh history substitution
mechanism. It enables you to reuse words from previously typed commands.
The default history substitution character is the ‘%’ (‘!’ is default for shell escapes, and
‘#’ marks the beginning of a comment). This can be changed using the set command. In
this description ’%’ is used as the history char. The ‘%’ can appear anywhere in a line.
A line containing a history substitution is echoed to the screen after the substitution takes
place. ‘%’ can be preceded by a ‘´ın order to escape the substitution, for example, to enter
a ‘%’ into an alias or to set the prompt.
Each valid line typed at the prompt is saved. If the history variable is set (see help page
for set), each line is also echoed to the history file. You can use the history command
to list the previously typed commands.
Substitutions:
At any point in a line these history substitutions are available.
Command Options:
%:0 Initial word of last command.
%:n n-th argument of last command.
%$ Last argument of last command.
%* All but initial word of last command.
%% Last command.
%stuf Last command beginning with “stuf”.
%n Repeat the n-th command.
%-n Repeat the n-th previous command.
old new Replace “old” with “new” in previous command. Trailing
spaces are significant during substitution. Initial spaces are
not significant.
print usage - Prints processor and BDD statistics. Command
print usage [-h]
Prints a formatted dump of processor-specific usage statistics, and BDD usage statistics.
For Berkeley Unix, this includes all of the information in the getrusage() structure.
quit - exits NuSMV Command
quit [-h] [-s] [-x]
Stops the program. Does not save the current network before exiting.
Command Options:
-s Frees all the used memory before quitting. This is slower,
and it is used for finding memory leaks.
107
-x Leaves immediately. Skip all the cleanup code, leaving it to
the OS. This can save quite a long time.
reset - Resets the whole system. Command
reset [-h]
Resets the whole system, in order to read in another model and to perform verification on
it.
set - Sets an environment variable Command
set [-h] [<name>] [<value>]
A variable environment is maintained by the command interpreter. The set command
sets a variable to a particular value, and the unset command removes the definition of a
variable. If set is given no arguments, it prints the current value of all variables.
Command Options:
<name> Variable name
<value> Value to be assigned to the variable.
Using the set command to set a variable, without giving any explicit value is allowed,
and sets the variable to 1:
NuSMV> set foo
will set the variable foo to 1.
Interpolation of variables is allowed when using the set command. The variables are
referred to with the prefix of ’$’. So for example, what follows can be done to check the
value of a set variable:
NuSMV> set foo bar
NuSMV> echo $foo
bar
The last line “bar” will be the output produced by NUSMV. Variables can be extended by
using the character ‘:’ to concatenate values. For example:
NuSMV> set foo bar
NuSMV> set foo $foo:foobar
NuSMV> echo $foo
bar:foobar
The variable foo is extended with the value foobar . Whitespace characters may
be present within quotes. However, variable interpolation lays the restriction that the
characters ’:’ and ’/’ may not be used within quotes. This is to allow for recursive
interpolation. So for example, the following is allowed
NuSMV> set "foo bar" this
NuSMV> echo $"foo bar"
this
The last line will be the output produced by NUSMV.
108
But in the following, the value of the variable foo/bar will not be interpreted correctly:
NuSMV> set "foo/bar" this
NuSMV> echo $"foo/bar"
foo/bar
If a variable is not set by the set command, then the variable is returned unchanged.
Different commands use environment information for different purposes. The command
interpreter makes use of the following parameters:
Command Options:
autoexec Defines a command string to be automatically executed after
every command processed by the command interpreter.
This is useful for things like timing commands, or tracing
the progress of optimization.
open path “open path” (in analogy to the shell-variable PATH) is a list
of colon-separated strings giving directories to be searched
whenever a file is opened for read. Typically the current directory
(.) is the first item in this list. The standard system
library (typically NuSMV LIBRARY PATH) is always implicitly
appended to the current path. This provides a convenient
short-hand mechanism for reaching standard library
files.
nusmv stderr Standard error (normally ( stderr)) can be re-directed to a
file by setting the variable nusmv stderr.
nusmv stdout Standard output (normally ( stdout)) can be re-directed to a
file by setting the variable nusmv stdout.
source - Executes a sequence of commands from a file Command
source [-h] [-p] [-s] [-x] <file> [<args>]
Reads and executes commands from a file.
Command Options:
-p Prints a prompt before reading each command.
-s Silently ignores an attempt to execute commands from a
nonexistent file.
-x Echoes each command before it is executed.
<file> File name.
Arguments on the command line after the filename are remembered but not evaluated.
Commands in the script file can then refer to these arguments using the history substitution
mechanism. EXAMPLE:
Contents of test.scr:
read model -i %:2
flatten hierarchy
build variables
build model
compute fairness
Typing source test.scr short.smv on the command line will execute the
sequence
109
read model -i short.smv
flatten hierarchy
build variables
build model
compute fairness
(In this case %:0 gets source, %:1 gets test.scr, and %:2 gets short.smv.) If
you type alias st source test.scr and then type st short.smv bozo,
you will execute
read model -i bozo
flatten hierarchy
build variables
build model
compute fairness
because bozo was the second argument on the last command line typed. In other
words, command substitution in a script file depends on how the script file was invoked.
Switches passed to a command are also counted as positional parameters. Therefore, if
you type st -x short.smv bozo, you will execute
read model -i short.smv
flatten hierarchy
build variables
build model
compute fairness
To pass the -x switch (or any other switch) to source when the script uses positional
parameters, you may define an alias. For instance, alias srcx source
-x.
See the variable on failure script quits for further information.
time - Provides a simple CPU elapsed time value Command
time [-h]
Prints the processor time used since the last invocation of the time command, and the
total processor time used since NUSMV was started.
unalias - Removes the definition of an alias. Command
unalias [-h] <alias-names>
Removes the definition of an alias specified via the alias command.
Command Options:
<alias-names> Aliases to be removed
110
unset - Unsets an environment variable Command
unset [-h] <variables>
A variable environment is maintained by the command interpreter. The set command
sets a variable to a particular value, and the unset command removes the definition of a
variable.
Command Options:
<variables> Variables to be unset.
usage - Provides a dump of process statistics Command
usage [-h]
Prints a formatted dump of processor-specific usage statistics. For Berkeley Unix, this
includes all of the information in the getrusage() structure.
which - Looks for a file called ”file name” Command
which [-h] <file name>
Looks for a file in a set of directories which includes the current directory as well as those
in the NUSMV path. If it finds the specified file, it reports the found file’s path. The
searching path is specified through the set open path command in .nusmvrc.
Command Options:
<file name> File to be searched
3.11 Other Environment Variables
The behavior of the system depends on the value of some environment variables. For instance, an
environment variable specifies the partitioning method to be used in building the transition relation.
The value of environment variables can be inspected and modified with the “set” command.
Environment variables can be either logical or utility.
autoexec Environment Variable
Defines a command string to be automatically executed after every command processed by
the command interpreter. This may be useful for timing commands, or tracing the progress
of optimization.
on failure script quits Environment Variable
When a non-fatal error occurs during the interactive mode, the interactive interpreter simply
stops the currently executed command, prints the reason of the problem, and prompts
for a new command. When set, this variables makes the command interpreter quit when
an error occur, and then quit NUSMV. This behaviour might be useful when the command
source is controlled by either a system pipe or a shell script. Under these conditions a
mistake within the script interpreted by source or any unexpected error might hang the
controlling script or pipe, as by default the interpreter would simply give up the current
execution, and wait for further commands. The default value of this environment variable
is 0.
111
filec Environment Variable
Enables file completion a la “csh”. If the system has been compiled with the “readline”
library, the user is able to perform file completion by typing the <TAB> key (in a way
similar to the file completion inside the “bash” shell). If the system has not been compiled
with the “readline” library, a built-in method to perform file completion a la “csh” can be
used. This method is enabled with the ‘set filec’ command. The “csh” file completion
method can be also enabled if the “readline” library has been used. In this case the
features offered by “readline” will be disabled.
shell char Environment Variable
shell char specifies a character to be used as shell escape. The default value of this
environment variable is ‘!’.
history char Environment Variable
history char specifies a character to be used in history substitutions. The default value
of this environment variable is ‘%’.
open path Environment Variable
open path (in analogy to the shell-variable PATH) is a list of colon-separated strings
giving directories to be searched whenever a file is opened for read. Typically the current
directory (.) is first in this list. The standard system library (NuSMV LIBRARY PATH)
is always implicitly appended to the current path. This provides a convenient short-hand
mechanism for reaching standard library files.
nusmv stderr Environment Variable
Standard error (normally stderr) can be re-directed to a file by setting the variable
nusmv stderr.
nusmv stdout Environment Variable
Standard output (normally stdout) can be re-directed to a file by setting the internal
variable nusmv stdout.
nusmv stdin Environment Variable
Standard input (normally stdin) can be re-directed to a file by setting the internal variable
nusmv stdin.
pp cpp path Environment Variable
pp cpp path is absoult or relative path to the preprocessor. If this value is set, preprocessor
from the path will be invoked. If this value is not set, the system will invoke default
cpp preprocessor.
pp m4 path Environment Variable
pp m4 path is absoult or relative path to the preprocessor. If this value is set, preprocessor
from the path will be invoked. If this value is not set, the system will invoke default
m4 preprocessor.
112
Figure 3.1: The dependency among NUSMV commands.
113
Chapter 4
Running NuSMV batch
When the -int option is not specified, NUSMV runs as a batch program, in the style of SMV,
performing (some of) the steps described in previous section in a fixed sequence.
system prompt> NuSMV [command line options] input-file <RET>
The program described in input-file is processed, and the corresponding finite state machine
is built. Then, if input-file contains formulas to verify, their truth in the specified structure is
evaluated. For each formula which is not true a counterexample is printed.
The batch mode can be controlled with the following command line options:
NUSMV [-h | -help] [-v vl] [-int] [[-source script_file | -load script_file]]
[-s] [-old] [-old_div_op] [-smv_old]
[-disable_syntactic_checks] [-keep_single_value_vars]
[-disable_daggifier] [-dcx] [-cpp] [-pre pps] [-ofm
fm file] [-obm bm file] [-lp] [-n idx] [-is]
[-ic] [-ils] [-ips] [-ii] [-ctt] [[-f] [-r]]|[-df] [-flt] [-AG]
[-coi] [-i iv file] [-o ov file] [-t
tv file] [-reorder] [-dynamic] [-m method]
[-disable_sexp2bdd_caching] [-bdd_soh heuristics]
[[-mono]|[-thresh cp t]|[-cp cp t]|[-iwls95
cp t]] [-noaffinity] [-iwls95preorder] [-bmc] [-bmc length
k] [-sat solver name] [-sin on|off] [-rin on|off]
[-ojeba algorithm] [ input-file]
where the meaning of the options is described below. If input-file is not provided in batch mode,
then the model is read from standard input.
114
-help
-h Prints the command line help.
-v verbose-level Enables printing of additional information on the internal
operations of NUSMV. Setting verbose-level to 1 gives the
basic information. Using this option makes you feel better,
since otherwise the program prints nothing until it finishes,
and there is no evidence that it is doing anything at all. Setting
the verbose-level higher than 1 enables printing of much
extra information.
-int Enables interactive mode
-source sc file Executes NuSMV commands from file sc file
-load sc file same as -source (deprecated)
-s Avoids to load the NUSMV commands contained
in ∼/.nusmvrc or in .nusmvrc or in
${NuSMV LIBRARY PATH }/master.nusmvrc.
-old
Keeps backward compatibility with older versions of
NuSMV. This option disables some new features like type
checking and dumping of new extension to SMV files. In addition,
if enabled, case conditions also accepts “1” which
is semantically equivalent to the truth value “TRUE”. This
backward compatibility feature has been added in NUSMV
2.5.1 in order to help porting of old SMV models. Infact,
in versions older than 2.5.1, it was pretty common to use 1
in case conditions expressions. For an example please see
section 2.2.3
-old div op Enables the old semantics of “/” and “mod” operations
(from NUSMV 2.3.0) instead of ANSI C semantics.
-disable syntactic
checks
Disables all syntactic checks that will be performed when
flattening the input model. Warning: If the model is not
well-formed, NUSMV may result in unpredictable results,
use this option at your own risk.
-disable daggifier Disables the daggification feature of model dumping
-keep single
value vars
Does not convert variables that have only one single possible
value into constant DEFINEs
-dcx Disables the generation of counter-examples for properties
that are proved to be false. See also variable
counter examples
-cpp Runs pre-processor on SMV files before any of those specified
with the -pre option. The user can set his own
preprocessor by setting system variables pp cpp path and
pp m4 path.
115
-pre pps Specifies a list of pre-processors to run (in the order given)
on the input file before it is parsed by NUSMV. Note that if
the -cpp command is used, then the pre-processors specified
by this command will be run after the input file has been
pre-processed by that pre-processor. pps is either one single
pre-processor name (with or without double quotes) or
it is a space-separated list of pre-processor names contained
within double quotes.
-ofm fm file prints flattened model to file fn file
-obm bm file Prints boolean model to file bn file
-lp Lists all properties in SMV model
-n idx Specifies which property of SMV model should be checked
-is Does not check SPEC properties. Sets to “1” the
ignore spec environment variable.
-ic Does not check COMPUTE properties. Sets to “1” the
ignore compute environment variable.
-ils Does not check LTLSPEC properties. Sets to “1” the
ignore ltlspec environment variable.
-ips Does not check PSLSPEC properties. Sets to “1” the
ignore pslspec environment variable.
-ii Does not check INVARSPEC properties. Sets to “1” the
ignore invariant environment variable.
-ctt Checks whether the transition relation is total.
-f Computes the set of reachable states before evaluating CTL
expressions. Since NuSMV-2.4.0 this option is set by default,
and it is provided for backward compatibility only. See
also option -df.
-r Prints the number of reachable states before exiting. If
the -f option is not used, the set of reachable states is
computed.
-df Disable the computation of the set of reachable states. This
option is provided since NuSMV-2.4.0 to prevent the computation
of reachable states that are otherwise computed by
default.
-flt Forces the computation of the set of reachable states for
the tableau resulting from BDD-based LTL model checking
(command check ltlspec). If the option -flt is
not specified (default), the resulting tableau will inherit the
computation of the reachable states from the model, if enabled.
If the option -flt is specified, the reachable states
set will be calculated for the model and for the tableau
resulting from LTL model checking. This might improve
performances of the command check ltlspec, but may
also lead to a dramatic slowing down. This options has effect
only when the calculation of reachable states is enabled
(see -f).
116
-AG Verifies only AG formulas using an ad hoc algorithm
(see documentation for the ag only search environment
variable).
-coi Enables cone of influence reduction. Sets to “1” the
cone of influence environment variable. We remark
that, when cone of influence reduction is enabled, a counterexample
trace for a property that does not hold may not be a
valid counter-example trace for the original model. We refer
the reader to the Frequently Asked Questions (FAQ) [FAQ].
-i iv file Reads the variable ordering from file iv file.
-o ov file Writes the variable ordering to file ov file.
-t tv file Reads a variable list from file tv file. This list defines
the order for clustering the transition relation. This feature
has been provided by Wendy Johnston, University of
Queensland. The results of Johnston’s et al. research have
been presented at FM 2006 in Hamilton, Canada. See
[WJKWLvdBR06].
-reorder Enables variable reordering after having checked all the
specification if any.
-dynamic Enables dynamic reordering of variables
-m method Uses method when variable ordering is enabled. Possible
values for method are those allowed for the
reorder method environment variable (see Section 3.9
[Interface to DD package], page 100).
-disable sexp2bdd caching
Sets the default value of environment variable
enable bdd cache to 0, i.e. the evaluation of symbolic
expression to ADD and BDD representations are not
cached. See command clean sexp2bdd cache for
reasons of why BDD cache should be disabled sometimes.
-bdd soh heuristics Sets the default value of environment variable
bdd static order heuristics to heuristics,
i.e. the option sets up the heuristics to be used to
compute BDD ordering statically by analyzing the
input model. See the documentation about variable
bdd static order heuristics on page 53 for more
details.
-mono Enables monolithic transition relation
-thresh cp t conjunctive partitioning with threshold of each partition set
to cp t (DEFAULT, with cp t=1000)
-cp cp t DEPRECATED: use thresh instead.
-iwls95 cp t Enables Iwls95 conjunctive partitioning and sets the threshold
of each partition to cp t
-noaffinity Disables affinity clustering
-iwls95preoder Enables Iwls95CP preordering
117
-bmc Enables BMC instead of BDD model checking (works only
for LTL properties and PSL properties that can be translated
into LTL)
-bmc length k Sets bmc length variable, used by BMC
-sat solver name Sets sat solver variable, used by BMC so select the sat
solver to be used.
-sin on,off Enables (on) or disables (off) Sexp inlining, by setting system
variable sexp inlining. Default value is off.
-rin on,off Enables (on) or disables (off) RBC inlining, by setting system
variable rbc inlining. Default value is on. The
idea about inlining was taken from [ABE00] by Parosh Aziz
Abdulla, Per Bjesse and Niklas E´en.
-ojeba algorithm Sets the algorthim used for BDD-based language emptiness
of B¨uchi fair transition systems by setting system variable
oreg justice emptiness bdd algorithm (default
is EL bwd). The available algorithms are: EL bwd
EL fwd
118
Bibliography
[ABE00] P. A. Abdulla, P. Bjesse, and N. E´en. Symbolic reachability analysis based
on sat-solvers. In Proceedings of Tools and Algorithms for Construction and
Analysis of Systems, 6th International Conference, TACAS 2000, volume
1785 of Lecture Notes in Computer Science, pages 411–425. Springer, 2000.
[BCCZ99] A. Biere, A. Cimatti, E. Clarke, and Y. Zhu. Symbolic model checking
without bdds. In Tools and Algorithms for Construction and Analysis of
Systems, In TACAS’99, March 1999.
[BCL+
94] J.R. Burch, E.M. Clarke, D.E. Long, K.L. McMillan, and D.L. Dill. Symbolic
model checking for sequential circuit verification. In IEEE Transactions
on Computer-Aided Design of Integrated Circuits and Systems,
13(4):401–424, April 1994.
[CBM90] O. Coudert, C. Berthet, and J. C. Madre. Verification of synchronous sequential
machines based on symbolic execution. In In J. Sifakis, editor,
Proceedings of the International Workshop on Automatic Verification Methods
for Finite State Systems, volume 407 of LNCS, pages 365–373, Berlin,
June 1990.
[CCG+
02] A. Cimatti, E. Clarke, E. Giunchiglia, F. Giunchiglia, M. Pistore, M. Roveri,
R. Sebastiani, and A. Tacchella. Nusmv 2: An opensource tool for symbolic
model checking. In Proceedings of Computer Aided Verification (CAV 02),
2002.
[CCGR00] A. Cimatti, E. Clarke, F. Giunchiglia, and M. Roveri. Nusmv: a new symbolic
model checker. In International Journal on Software Tools for Technology
Transfer (STTT), 2(4), March 2000.
[CGH97] E. Clarke, O. Grumberg, and K. Hamaguchi. Another look at ltl model
checking. In Formal Methods in System Design, 10(1):57–71, February
1997.
[Dil88] D. Dill. Trace theory for automatic hierarchical verification of speedindependent
circuits. In ACM Distinguished Dissertations. MIT Press, 1988.
[EL86] E. Emerson and C. Lei. Efficient model checking in fragments of the propositional
mu-calculus (extended abstract). In LICS, pages 267–278. IEEE
Computer Society, 1986.
[EMSS91] E. Allen Emerson, A. K. Mok, A. Prasad Sistla, and Jai Srinivasan. Quantitative
temporal reasoning. In Edmund M. Clarke and Robert P. Krushan,
editors, Proceedings of Computer-Aided Verification (CAV’90), volume 531
of LNCS, pages 136-145, Berlin, Germany, June 1991.
[ES04] Niklas E´en and Niklas S¨orensson. Temporal induction by incremental sat
solving. In Ofer Strichman and Armin Biere, editors, Electronic Notes in
Theoretical Computer Science, volume 89. Elsevier, 2004.
119
[FAQ] Frequently Asked Questions (FAQ). Available at http://nusmv.fbk.
eu/faq.html or within the NUSMV distribution package.
[HKQ03] T. A. Henzinger, O. Kupferman, and S. Qadeer. From Pre-historic to Postmodern
symbolic model checking. Formal Methods in System Design,
23(3):303–327, 2003.
[KHL05] T. Junttila K. Heljanko and T. Latvala. Incremental and complete bounded
model checking for full PLTL. In K. Etessami and S. K. Rajamani, editors,
Computer Aided Verification, 17th
International Conference CAV
2005, number 3576 in Lecture Notes in Computer Science, pages 98–111.
Springer, 2005.
[LBHJ05] T. Latvala, A. Biere, K. Heljanko, and T. Junttila. Simple is better: Efficient
bounded model checking for past LTL. In R. Cousot, editor, Verification,
Model Checking, and Abstract Interpretation, 6th International Conference
VMCAI 2005, number 3385 in Lecture Notes in Computer Science, pages
380–395. Springer, 2005.
[Mar85] A.J. Martin. The design of a self-timed circuit for distributed mutual exclusion.
In In H. Fuchs and W.H. Freeman, editors, Proceedings of the 1985
Chapel Hill Conference on VLSI, pages 245–260, New York, 1985.
[McM92] K.L. McMillan. The smv system – draft. In Available at http://www.
cs.cmu.edu/˜modelcheck/smv/smvmanual.r2.2.ps, 1992.
[McM93] K.L. McMillan. Symbolic model checking. In Kluwer Academic Publ.,
1993.
[MHS00] Moon, Hachtel, and Somenzi. Border-block tringular form and conjunction
schedule in image computation. In FMCAD, 2000.
[PSL] Language Front-End for Sugar Foundation Language.
http://www.haifa.il.ibm.com/projects/verification/sugar/parser.html.
[psl03] Accellera, Property Specification Language - Reference Manual - Version
1.01. http://www.eda.org/vfv/docs/psl lrm-1.01.pdf, April 2003.
[RAP+
95] R. K. Ranjan, A. Aziz, B. Plessier, C. Pixley, and R. K. Brayton. Efficient
bdd algorithms for fsm synthesis and verification. In In IEEE/ACM
Proceedings International Workshop on Logic Synthesis, Lake Tahoe (NV),
May 1995.
[sfVS96] ”VIS: A system for Verification and The VIS Group Synthesis”. Proceedings
of the 8th international conference on computer aided verification,
p428-432. In Springer Lecture Notes in Computer Science, 1102, Edited
by R. Alur and T. Henzinger, New Brunswick, NJ, 1996.
[She04] Daniel Sheridan. The optimality of a fast cnf conversion and its use with
sat. In SAT, 2004.
[Som98] F. Somenzi. Cudd: Cu decision diagram package — release 2.2.0. In Department
of Electrical and Computer Engineering — University of Colorado
at Boulder, May 1998.
[WJKWLvdBR06] P. A. Strooper W. Johnston K. Winter L. van den Berg and P. Robinson.
Model-based variable and transition orderings for efficient symbolic model
checking. In FM 2006: Formal Methods, number 4085 in Lecture Notes in
Computer Science, pages 524–540. Springer Berlin, 2006.
120
Appendix A
Compatibility with CMU SMV
The NUSMV language is mostly source compatible with the original version of SMV distributed
at Carnegie Mellon University from which we started. In this appendix we describe the most
common problems that can be encountered when trying to use old CMU SMV programs with
NUSMV.
The main problem is variable names in old programs that conflicts with new reserved keywords.
The list of the new reserved keywords of NUSMV w.r.t. CMU SMV is the following:
F, G, X, U, V,
W, H, O, Y, Z,
S, T, B
These names are reserved for the LTL temporal operators.
CTLSPEC It is used to introduce CTL specifications.
LTLSPEC It is used to introduce LTL specifications.
INVARSPEC It is used to introduce invariant specifications.
PSLSPEC It is used to introduce PSL specifications.
IVAR It is used to introduce input variables.
FROZENVAR It is used to introduce frozen variables.
JUSTICE It is used to introduce “justice” fairness constraints.
COMPASSION It is used to introduce “compassion” fairness constraints.
CONSTANTS It is used to force declaration of constants.
word It is used to declare word type variables.
word1 It is used to cast boolean expressions to word type.
bool It is used to cast word1 expressions to boolean type.
unsigned It is used to cast signed words to unsigned ones.
signed It is used to cast unsigned words to signed ones.
extend It is used to increase the width of words.
The IMPLEMENTS, INPUT, OUTPUT statements are not no longer supported by NUSMV.
NUSMV differs from CMU SMV also in the controls that are performed on the input formulas.
Several formulas that are valid for CMU SMV, but that have no clear semantics, are not
accepted by NUSMV.
In particular:
• It is no longer possible to write formulas containing nested‘next’.
TRANS
next(alpha & next(beta | next(gamma))) -> delta
121
• It is no longer possible to write formulas containing ‘next’ in the right hand side of
“normal” and “init” assignments (they are allowed in the right hand side of “next” assignments),
and with the statements ‘INVAR’ and ‘INIT’.
INVAR
next(alpha) & beta
INIT
next(beta) -> alpha
ASSIGN
delta := alpha & next(gamma); -- normal assignments
init(gamma) := alpha & next(delta); -- init assignments
• It is no longer possible to write ‘SPEC’, ‘FAIRNESS’ statements containing ‘next’.
FAIRNESS
next(running)
SPEC
next(x) & y
• The check for circular dependencies among variables has been done more restrictive. We
say that variable x depends on variable y if x := f(y). We say that there is a circular
dependency in the definition of x if:
– x depends on itself ( e.g. x := f(x,y) );
– x depends on y and y depends on x (e.g. x := f(y) and y := f(x) or x := f(z), z := f(y)
and y := f(x) ).
In the case of circular dependencies among variables there is no fixed order in which
we can compute the involved variables. Avoiding circular dependencies among variables
guarantee that there exists an order in which the variables can be computed. In NUSMV
circular dependencies are not allowed.
In CMU SMV the test for circular dependencies is able to detect circular dependencies
only in “normal” assignments, and not in “next” assignments. The circular dependencies
check of NUSMV has been extended to detect circularities also in “next” assignments.
For instance the following fragment of code is accepted by CMU SMV but discarded by
NUSMV.
MODULE main
VAR
y : boolean;
x : boolean;
ASSIGN
next(x) := x & next(y);
next(y) := y & next(x);
Another difference between NUSMV and CMU SMV is in the variable order file. The variable
ordering file accepted by NUSMV can be partial and can contain variables not declared in
the model. Variables listed in the ordering file but not declared in the model are simply discarded.
The variables declared in the model but not listed in the variable file provided in input are created
at the end of the given ordering following the default ordering. All the ordering files generated
by CMU SMV are accepted in input from NUSMV but the ordering files generated by NUSMV
may be not accepted by CMU SMV. Notice that there is no guarantee that a good ordering for
CMU SMV is also a good ordering for NUSMV. In the ordering files for NUSMV, identifier
process selector can be used to control the position of the variable that encodes process
selection. In CMU SMV it is not possible to control the position of this variable in the ordering;
it is hard-coded at the top of the ordering. A further difference about variable ordering consists
in the fact that in NUSMV it is allowed to specify single bits of scalar variables. In the example:
122
VAR x : 0..7;
NUSMV will create three variables x.0, x.1 and x.2 that can be explicitly mentioned in
the variable ordering file to fine control their ordering.
123
Appendix B
Typing Rules
This appendix gives the explicit formal typing rules for NUSMV’s input language, as well as
notes on implicit conversion and casting.
In the following, an atomic constant is defined as being any sequence of characters starting
with a character in the set {A-Za-z } and followed by a possible empty sequence of characters
from the set {A-Za-z0-9 $#-\}. An integer is any whole number, positive or negative.
B.1 Types
The main types recognised by NUSMV are as follows:
boolean
integer
symbolic enum
integers-and-symbolic enum
boolean set
integer set
symbolic set
integers-and-symbolic set
unsigned word[N] (where N is any whole number ≥ 1)
signed word[N] (where N is any whole number ≥ 1)
For more detalied description of existing types see Section 2.1 [Types], page 7.
B.2 Implicit Conversion
There is only one kind of implicit convertion. For more information on type ordering see Section
2.2.1 [Implicit Type Conversion], page 10.
Implicit type convertions changes the type of an expression to its counterpart set type. The
Figure B.2 shows the direction of such convertions. For more information on set types and their
counterpart types see Section 2.1.6 [Set Types], page 8.
124
boolean
integer symbolic enum
↓ ↓
integers-and-symbolic enum
unsigned word[1]
unsigned word[2]
unsigned word[3]
...
boolean set
integer set symbolic set
↓ ↓
integers-and-symbolic set
signed word[1]
signed word[2]
signed word[3]
...
Figure B.1: The ordering on the types in NUSMV
boolean → boolean set
integer → integer set
symbolic enum → symbolic set
integers-and-symbolic enum → integers-and-symbolic set
Figure B.2: Implicit convertion to counterpart set types
B.3 Type Rules
The type rules are presented below with the operators on the left and the signatures of the rules
on the right. To save space, more than one operator may be on the left-hand side, and it is also
the case that an individual operator may have more than one signature. For more information on
these expressions and their type rules see Section 2.2 [Expressions], page 9.
Constants
boolean constant : boolean
integer constant : integer
symbolic constant : symbolic enum
word constant : unsigned word[N] or signed word[N] (where N is the number of bits required)
range constant : integer set
Variable and Define
variable identifier : Type (where Type is the type of the variable)
define identifier : Type (where Type is the type of the define’s expression)
125
Arithmetic Operators
- : integer → integer
: unsigned word[N] → unsigned word[N]
: signed word[N] → signed word[N]
+, -, /, * : integer * integer → integer
: unsigned word[N] * unsigned word[N] → unsigned word[N]
: signed word[N] * signed word[N] → signed word[N]
mod : integer * integer → integer
: unsigned word[N] * unsigned word[N] → unsigned word[N]
: signed word[N] * signed word[N] → signed word[N]
For operations on words, the result is taken modulo 2N
>, <, >=, <= : integer * integer → boolean
: unsigned word[N] * unsigned word[N] → boolean
: signed word[N] * signed word[N] → boolean
Logic Operators
! (negation) : boolean → boolean
: unsigned word[N] → unsigned word[N]
: signed word[N] → signed word[N]
&, |, ->, <->, xor, xnor : boolean * boolean → boolean
: unsigned word[N] * unsigned word[N] → unsigned word[N]
: signed word[N] * signed word[N] → signed word[N]
=, != : boolean * boolean → boolean
: integer * integer → boolean
: symbolic enum * symbolic enum → boolean
: integers-and-symbolic enum *
integers-and-symbolic enum → boolean
: unsigned word[N] * unsigned word[N] → boolean
: signed word[N] * signed word[N] → boolean
Index Subscript Operator
exp1[exp2] : array N..M of subtype * word[N] → subtype
: array N..M of subtype * integer → subtype
the value of exp2 has to be in range [N, M]
Bit-Wise Operators
:: (concatenation) : word[N] * word[M] → unsigned word[N+M]
where word[•] can be any of unsigned word[•] or signed word[•]
exp1[exp2, exp3] : unsigned word[N] * integer * integer → unsigned word[exp3 − exp2 + 1]
: signed word[N] * integer * integer → unsigned word[exp3 − exp2 + 1]
exressions exp2 and exp3 must be integers such that 0 ≤ exp2 ≤ exp3 < N
<<, >> (shift) : unsigned word[N] * integer → unsigned word[N]
: unsigned word[N] * unsigned word[•] → unsigned word[N]
: signed word[N] * integer → signed word[N]
: signed word[N] * unsigned word[•] → signed word[N]
126
Set Operators
{exp1, exp2, . . . , expn} : equivalent to consecutive union operations
union : boolean set * boolean set → boolean set
: integer set * integer set → integer set
: symbolic set * symbolic set → symbolic set
: integers-and-symbolic set * integers-and-symbolic set
→ integers-and-symbolic set
At first, if it is possible, the operands are converted to their set counterpart types,
then both operands are implicitly converted to a minimal common type
in : boolean set * boolean set → boolean set
: integer set * integer set → integer set
: symbolic set * symbolic set → symbolic set
: integers-and-symbolic set * integers-and-symbolic set
→ integers-and-symbolic set
At first, if it is possible, the operands are converted to their set counterpart types,
then implicit convertion is performed on one of the operands
Case and If-Then-Else Expression
case cond1 : result1;
cond2 : result2;
. . .
condn : resultn;
esac
cond ? result1 : result2
condi must be of type boolean. If one of resulti is of a set type then all other resultk are
converted to their counterpart set types. The overall type of the expression is such a minimal
type that each resulti can be implicitly converted to.
Formula Operators
EX, AX, EF, AF, EG, AG,
X, Y, Z, G, H, F, O : boolean → boolean
A-U, E-U, U, S : boolean * boolean → boolean
A-BU, E-BU : boolean * integer * integer * boolean → boolean
EBF, ABF, EBG, ABG : integer * integer * boolean → boolean
127
Miscellaneous Operators
Integer..Integer : integer number * integer number → integer
bool : unsigned word[1] → boolean
: integer → boolean
toint : boolean → integer
: unsigned word[N] constant → integer
: signed word[N] constant → integer
word1 : boolean → unsigned word[1]
signed : unsigned word[N] → signed word[N]
unsigned : signed word[N] → unsigned word[N]
extend : unsigned word[•] * integer → unsigned word[N+integer ]
: signed word[•] * integer → signed word[N+integer ]
next, init : any type → the same type
() : any type → the same type
:= : boolean * boolean → no type
: integer * integer → no type
: integer * integer set → no type
: symbolic enum * symbolic enum → no type
: symbolic enum * symbolic set → no type
: integers-and-symbolic enum *
integers-and-symbolic enum → no type
: integers-and-symbolic enum *
integers-and-symbolic set → no type
: unsigned word[N] * unsigned word[N] → no type
: signed word[N] * signed word[N] → no type
Implicit type conversion is performed on the right operand only
128
Appendix C
Production Rules
This appendix contains the syntactic production rules for writing a NUSMV program.
Identifiers
identifier ::
identifier_first_character
| identifier identifier_consecutive_character
identifier_first_character :: one of
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
a b c d e f g h i j k l m n o p q r s t u v w x y z _
identifier_consecutive_character ::
identifier_first_character
| digit
| one of $ # digit
:: one of 0 1 2 3 4 5 6 7 8 9
Note that there are certain reserved keyword which cannot be used as identifiers (see page
6).
Variable and DEFINE Identifiers
define_identifier :: complex_identifier
variable_identifier :: complex_identifier
Complex Identifiers
complex_identifier ::
identifier
| complex_identifier . identifier
| complex_identifier [ simple_expression ]
| self
Integer Numbers
integer_number ::
129
- digit
| digit
| integer_number digit
Constants
constant ::
boolean_constant
| integer_constant
| symbolic_constant
| word_constant
| range_constant
boolean_constant :: one of
FALSE TRUE
integer_constant :: integer_number
symbolic_constant :: identifier
word_constant :: 0 [word_sign_specifier] word_base [word_width] _ word_value
word_sign_specifier :: one of
u s
word_width :: integer_number (>0)
word_base :: b | B | o | O | d | D | h | H
word_value ::
hex_digit
| word_value hex_digit
| word_value
hex_digit :: one of
0 1 2 3 4 5 6 7 8 9 a b c d e f A B C D E F
Note that there are some additional restrictions on the exact format of word constants (see
page 11).
range_constant ::
integer_number .. integer_number
Basic Expressions
basic_expr ::
constant -- a constant
| variable_identifier -- a variable identifier
| define_identifier -- a define identifier
| ( basic_expr )
| abs basic expr -- absolute value
| max ( basic expr , basic expr ) -- max
| min ( basic expr , basic expr ) -- min
| ! basic_expr -- logical/bitwise NOT
| basic_expr & basic_expr -- logical/bitwise AND
| basic_expr | basic_expr -- logical/bitwise OR
130
| basic_expr xor basic_expr -- logical/bitwise exclusive OR
| basic_expr xnor basic_expr -- logical/bitwise NOT xor
| basic_expr -> basic_expr -- logical/bitwise implication
| basic_expr <-> basic_expr -- logical/bitwise equivalence
| basic_expr = basic_expr -- equality
| basic_expr != basic_expr -- inequality
| basic_expr < basic_expr -- less than
| basic_expr > basic_expr -- greater than
| basic_expr <= basic_expr -- less than or equal
| basic_expr >= basic_expr -- greater than or equal
| - basic_expr -- unary minus
| basic_expr + basic_expr -- integer addition
| basic_expr - basic_expr -- integer subtraction
| basic_expr * basic_expr -- integer multiplication
| basic_expr / basic_expr -- integer division
| basic_expr mod basic_expr -- integer remainder
| basic_expr >> basic_expr -- bit shift right
| basic_expr << basic_expr -- bit shift left
| basic_expr [ index ] -- index subscript
| basic_expr [ integer_number : integer_number ]
-- word bits selection
| basic_expr :: basic_expr -- word concatenation
| word1 ( basic_expr )
-- boolean to word[1] convertion
| bool ( basic_expr )
-- word[1] and integer to boolean convertion
| toint ( basic_expr )
-- word[N] and boolean to integer convertion
| signed ( basic_expr )
-- unsigned to signed word convertion
| unsigned ( basic_expr )
-- signed to unsigned word convertion
| extend ( basic_expr , basic_expr)
-- word width increase
| resize ( basic_expr , basic_expr)
-- word width resizing
| basic_expr union basic_expr
-- union of set expressions
| { set_body_expr } -- set expression
| basic_expr in basic_expr -- inclusion expression
| basic_expr ? basic_expr : basic_expr
-- if-then-else expression
| count ( basic_expr_list )
-- count of TRUE boolean expressions
| case_expr -- case expression
| next ( basic_expr ) -- next expression
basic_expr_list ::
basic_expr
| basic_expr_list , basic_expr
set_body_expr ::
basic_expr
| set_body_expr , basic_expr
Case Expression and If-Then-Else Expression
case_expr :: case case_body esac
case_body ::
131
basic_expr : basic_expr ;
| case_body basic_expr : basic_expr ;
basic_expr ? basic_expr : basic_expr
Simple Expression
simple_expr :: basic_expr
Note that simple expressions cannot contain next operators.
Next Expression
next_expr :: basic_expr
Type Specifier
type_specifier ::
simple_type_specifier
| module_type_spicifier
simple_type_specifier ::
boolean
| word [ integer_number ]
| unsigned word [ integer_number ]
| signed word [ integer_number ]
| { enumeration_type_body }
| integer_number .. integer_number
| array integer_number .. integer_number
of simple_type_specifier
enumeration_type_body ::
enumeration_type_value
| enumeration_type_body , enumeration_type_value
enumeration_type_value ::
symbolic_constant
| integer_number
Module Type Specifier
module_type_specifier ::
| identifier [ ( [ parameter_list ] ) ]
| process identifier [ ( [ parameter_list ] ) ]
parameter_list ::
simple_expr
| parameter_list , simple_expr
State, Input and Frozen Variables
var_declaration :: VAR var_list
ivar_declaration :: IVAR simple_var_list
132
frozenvar_declaration :: FROZENVAR simple_var_list
var_list :: identifier : type_specifier ;
| var_list identifier : type_specifier ;
simple_var_list :: identifier : simple_type_specifier ;
| simple_var_list identifier : simple_type_specifier ;
DEFINE Declaration
define_declaration :: DEFINE define_body
define_body :: identifier := simple_expr ;
| define_body identifier := simple_expr ;
CONSTANTS Declaration
constants_declaration :: CONSTANTS constants_body ;
constants_body :: identifier
| constants_body , identifier
ASSIGN Declaration
assign_constraint :: ASSIGN assign_list
assign_list :: assign ;
| assign_list assign ;
assign ::
complex_identifier := simple_expr
| init ( complex_identifier ) := simple_expr
| next ( complex_identifier ) := next_expr
TRANS Statement
trans_constraint :: TRANS next_expr [;]
INIT Statement
init_constrain :: INIT simple_expr [;]
INVAR Statement
invar_constraint :: INVAR simple_expr [;]
Module Declarations
module :: MODULE identifier [(module_parameters)] [module_body]
module_parameters ::
identifier
| module_parameters , identifier
module_body ::
133
module_element
| module_body module_element
module_element ::
var_declaration
| ivar_declaration
| frozenvar_declaration
| define_declaration
| constants_declaration
| assign_constraint
| trans_constraint
| init_constraint
| invar_constraint
| fairness_constraint
| ctl_specification
| invar_specification
| ltl_specification
| compute_specification
| isa_declaration
ISA Declaration
isa_declaration :: ISA identifier
Warning: this is a deprecated feature and will eventually be removed from NUSMV. Use
module instances instead.
CTL Specification
ctl_specification :: SPEC ctl_expr ;
ctl_expr ::
simple_expr -- a simple boolean expression
| ( ctl_expr )
| ! ctl_expr -- logical not
| ctl_expr & ctl_expr -- logical and
| ctl_expr | ctl_expr -- logical or
| ctl_expr xor ctl_expr -- logical exclusive or
| ctl_expr xnor ctl_expr -- logical NOT exclusive or
| ctl_expr -> ctl_expr -- logical implies
| ctl_expr <-> ctl_expr -- logical equivalence
| EG ctl_expr -- exists globally
| EX ctl_expr -- exists next state
| EF ctl_expr -- exists finally
| AG ctl_expr -- forall globally
| AX ctl_expr -- forall next state
| AF ctl_expr -- forall finally
| E [ ctl_expr U ctl_expr ] -- exists until
| A [ ctl_expr U ctl_expr ] -- forall until
INVAR Specification
invar_specification :: INVARSPEC simple_expr ;
This is equivalent to
134
SPEC AG simple_expr ;
but is checked by a specialised algorithm during reachability analysis.
LTL Specification
ltl_specification :: LTLSPEC ltl_expr [;]
ltl_expr ::
simple_expr -- a simple boolean expression
| ( ltl_expr )
| ! ltl_expr -- logical not
| ltl_expr & ltl_expr -- logical and
| ltl_expr | ltl_expr -- logical or
| ltl_expr xor ltl_expr -- logical exclusive or
| ltl_expr xnor ltl_expr -- logical NOT exclusive or
| ltl_expr -> ltl_expr -- logical implies
| ltl_expr <-> ltl_expr -- logical equivalence
-- FUTURE
| X ltl_expr -- next state
| G ltl_expr -- globally
| F ltl_expr -- finally
| ltl_expr U ltl_expr -- until
| ltl_expr V ltl_expr -- releases
-- PAST
| Y ltl_expr -- previous state
| Z ltl_expr -- not previous state not
| H ltl_expr -- historically
| O ltl_expr -- once
| ltl_expr S ltl_expr -- since
| ltl_expr T ltl_expr -- triggered
Real Time CTL Specification
rtctl_specification :: SPEC rtctl_expr [;]
rtctl_expr ::
ctl_expr
| EBF range rtctl_expr
| ABF range rtctl_expr
| EBG range rtctl_expr
| ABG range rtctl_expr
| A [ rtctl_expr BU range rtctl_expr ]
| E [ rtctl_expr BU range rtctl_expr ]
range :: integer_number .. integer_number
It is also possible to compute quantative information for the FSM:
compute_specification :: COMPUTE compute_expr [;]
compute_expr :: MIN [ rtctl_expr , rtctl_expr ]
| MAX [ rtctl_expr , rtctl_expr ]
135
PSL Specification
pslspec_declaration :: "PSLSPEC " psl_expr ";"
psl_expr ::
psl_primary_expr
| psl_unary_expr
| psl_binary_expr
| psl_conditional_expr
| psl_case_expr
| psl_property
psl_primary_expr ::
number ;; a numeric constant
| boolean ;; a boolean constant
| var_id ;; a variable identifier
| { psl_expr , ... , psl_expr }
| { psl_expr "{" psl_expr , ... , "psl_expr" }}
| ( psl_expr )
psl_unary_expr ::
+ psl_primary_expr
| - psl_primary_expr
| ! psl_primary_expr
psl_binary_expr ::
psl_expr + psl_expr
| psl_expr union psl_expr
| psl_expr in psl_expr
| psl_expr - psl_expr
| psl_expr * psl_expr
| psl_expr / psl_expr
| psl_expr % psl_expr
| psl_expr == psl_expr
| psl_expr != psl_expr
| psl_expr < psl_expr
| psl_expr <= psl_expr
| psl_expr > psl_expr
| psl_expr >= psl_expr
| psl_expr & psl_expr
| psl_expr | psl_expr
| psl_expr xor psl_expr
psl_conditional_expr ::
psl_expr ? psl_expr : psl_expr
psl_case_expr ::
case
psl_expr : psl_expr ;
...
psl_expr : psl_expr ;
endcase
Among the subclasses of psl expr we depict the class psl bexpr that will be used in the
following to identify purely boolean, i.e. not temporal, expressions.
psl_property ::
replicator psl_expr ;; a replicated property
| FL_property abort psl_bexpr
136
| psl_expr <-> psl_expr
| psl_expr -> psl_expr
| FL_property
| OBE_property
replicator ::
forall var_id [index_range] in value_set :
index_range ::
[ range ]
range ::
low_bound : high_bound
low_bound ::
number
| identifier
high_bound ::
number
| identifier
| inf ;; inifite high bound
value_set ::
{ value_range , ... , value_range }
| boolean
value_range ::
psl_expr
| range
FL_property ::
;; PRIMITIVE LTL OPERATORS
X FL_property
| X! FL_property
| F FL_property
| G FL_property
| [ FL_property U FL_property ]
| [ FL_property W FL_property ]
;; SIMPLE TEMPORAL OPERATORS
| always FL_property
| never FL_property
| next FL_property
| next! FL_property
| eventually! FL_property
| FL_property until! FL_property
| FL_property until FL_property
| FL_property until!_ FL_property
| FL_property until_ FL_property
| FL_property before! FL_property
| FL_property before FL_property
| FL_property before!_ FL_property
| FL_property before_ FL_property
;; EXTENDED NEXT OPERATORS
| X [number] ( FL_property )
| X! [number] ( FL_property )
| next [number] ( FL_property )
| next! [number] ( FL_property )
;;
| next_a [range] ( FL_property )
| next_a! [range] ( FL_property )
| next_e [range] ( FL_property )
137
| next_e! [range] ( FL_property )
;;
| next_event! ( psl_bexpr ) ( FL_property )
| next_event ( psl_bexpr ) ( FL_property )
| next_event! ( psl_bexpr ) [ number ] ( FL_property )
| next_event ( psl_bexpr ) [ number ] ( FL_property )
;;
| next_event_a! ( psl_bexpr ) [psl_expr] ( FL_property )
| next_event_a ( psl_bexpr ) [psl_expr] ( FL_property )
| next_event_e! ( psl_bexpr ) [psl_expr] ( FL_property )
| next_event_e ( psl_bexpr ) [psl_expr] ( FL_property )
;; OPERATORS ON SEREs
| sequence ( FL_property )
| sequence |-> sequence [!]
| sequence |=> sequence [!]
;;
| always sequence
| G sequence
| never sequence
| eventually! sequence
;;
| within! ( sequence_or_psl_bexpr , psl_bexpr ) sequence
| within ( sequence_or_psl_bexpr , psl_bexpr ) sequence
| within!_ ( sequence_or_psl_bexpr , psl_bexpr ) sequence
| within_ ( sequence_or_psl_bexpr , psl_bexpr ) sequence
;;
| whilenot! ( psl_bexpr ) sequence
| whilenot ( psl_bexpr ) sequence
| whilenot!_ ( psl_bexpr ) sequence
| whilenot_ ( psl_bexpr ) sequence
sequence_or_psl_bexpr ::
sequence
| psl_bexpr
sequence ::
{ SERE }
SERE ::
sequence
| psl_bexpr
;; COMPOSITION OPERATORS
| SERE ; SERE
| SERE : SERE
| SERE & SERE
| SERE && SERE
| SERE | SERE
;; RegExp QUALIFIERS
| SERE [* [count] ]
| [* [count] ]
| SERE [+]
| [+]
;;
| psl_bexpr [= count ]
| psl_bexpr [-> count ]
count ::
number
138
| range
OBE_property ::
AX OBE_property
| AG OBE_property
| AF OBE_property
| A [ OBE_property U OBE_property ]
| EX OBE_property
| EG OBE_property
| EF OBE_property
| E [ OBE_property U OBE_property ]
139
Command Index
!, see bang 104
, 104
convert property to invar, 67
add property, 65
alias, 104
bmc inc simulate, 83
bmc pick state, 82
bmc setup, 69
bmc simulate check feasible constraints,
84
bmc simulate, 82
build boolean model, 55
build flat model, 55
build model, 52
check compute, 64
check ctlspec, 59
check fsm, 58
check invar bmc inc, 80
check invar bmc, 79
check invar, 60
check ltlspec bmc inc, 74
check ltlspec bmc onepb, 71
check ltlspec bmc, 69
check ltlspec sbmc inc, 76
check ltlspec sbmc, 75
check ltlspec, 63
check property, 65
check pslspec bmc inc, 86
check pslspec bmc, 85
check pslspec sbmc inc, 88
check pslspec sbmc, 87
check pslspec, 84
clean sexp2bdd cache, 102
compute reachable, 57
dump fsm, 57
dynamic var ordering, 101
echo, 105
encode variables, 50
execute partial traces, 93
execute traces, 92
flatten hierarchy, 48
gen invar bmc, 80
gen ltlspec bmc onepb, 73
gen ltlspec bmc, 72
gen ltlspec sbmc, 77
get internal status, 54
go bmc, 69
goto state, 94
go, 54
help, 105
history, 105
pick state, 89
print bdd stats, 103
print current state, 94
print fair states, 59
print fair transitions, 59
print formula, 103
print fsm stats, 58
print iwls95options, 54
print reachable states, 58
print usage, 106
process model, 54
quit, 106
read model, 48
read trace, 96
reset, 107
set bdd parameters, 103
set, 107
show dependencies, 50
show plugins, 95
show property, 66
show traces, 96
show vars, 49
simulate, 90
source, 108
time, 109
unalias, 109
unset, 110
usage, 110
which, 110
write boolean model, 56
write coi model, 67
write flat model, 55
write order, 51
140
Variable Index
NuSMV LIBRARY PATH, 111, 114
affinity, 53
ag only search, 60
autoexec, 110
backward compatibility, 49
bdd static order heuristics, 52
bmc dimacs filename, 78
bmc force pltl tableau, 78
bmc inc invar alg, 81
bmc invar alg, 81
bmc invar dimacs filename, 81
bmc length, 78
bmc loopback, 78
bmc optimized tableau, 78
bmc sbmc gf fg opt, 79
check fsm, 58
check invar bdd bmc heuristic,
63
check invar bdd bmc threshold,
63
check invar forward backward heuristic,
63
check invar strategy, 63
cone of influence, 68
conj part threshold, 53
counter examples, 95
daggifier counter threshold, 56
daggifier depth threshold, 56
daggifier enabled, 56
daggifier statistics, 56
default simulation steps, 92
default trace plugin, 96
disable syntactic checks, 49
dynamic reorder, 100
enable sexp2bdd caching, 103
filec, 111
forward search, 60
history char, 111
image W{1,2,3,4}, 53
image cluster size, 53
image verbosity, 54
input file, 48
input order file, 51
iwls95preorder, 54
keep single value vars, 49
ltl2smv single justice, 64
ltl tableau forward search, 60
nusmv stderr, 111
nusmv stdin, 111
nusmv stdout, 111
on failure script quits, 110
open path, 111
oreg justice emptiness bdd algorithm,
60
output boolean model file, 56
output flatten model file, 55
output order file, 51
output word format, 56
partition method, 53
pp cpp path, 111
pp list, 48
pp m4 path, 111
prop print method, 68
rbc inlining, 69
rbc rbc2cnf algorithm, 69
reorder method, 100
sat solver, 82
sexp inlining, 69
shell char, 111
show defines in traces, 95
shown states, 92
traces hiding prefix, 92, 95
traces regexp, 92, 95
traces show defines with next,
95
trans order file, 53
type checking warning on, 49
use coi size sorting, 68
vars order type, 51
verbose level, 48
write order dumps bits, 51
141
Index
Symbols
.nusmvrc, 114
-AG, 116
-bdd soh, 116
-bmc length k, 116
-bmc, 116
-coi, 116
-cpp, 114
-cp cp t, 116
-ctt, 115
-dcx, 114
-disable daggifier, 114
-disable sexp2bdd caching, 116
-disable syntactic checks, 114
-dynamic, 116
-flt, 115
-f, 115
-help, 114
-h, 114
-ic, 115
-ii, 115
-ils, 115
-is, 115
-iwls95preorder, 116
-iwls95 cp t, 116
-i iv file, 116
-keep single value vars, 114
-lp, 115
-mono, 116
-m method, 116
-noaffinity, 116
-n idx, 115
-obm bm file, 115
-ofm fm file, 115
-ojeba algorithm, 116
-old div op, 114
-old, 114
-o ov file, 116
-pre pps, 115
-reorder, 116
-rin on,off, 116
-r, 115
-sat solver name, 116
-sin on,off, 116
-source cmd-file, 47
-thresh cp t, 116
-t tv file, 116
-v verbose-level, 114
ASSIGN constraint, 27
FAIRNESS constraints, 29
FROZENVAR declaration, 24
IVAR declaration, 23, 25
VAR declaration, 23, 25
running, 33
temp.ord, 51
+,-,*,/, 14
::, 16
<<, >>, 15
>,<,>=,<=, 14
[:], 16
[], 16
mod, 15
˜/.nusmvrc, 114
A
administration commands, 104
AND
logical and bitwise, 13
array define declarations, 26
array type, 7
Array Variables, 46
B
basic next expression, 20
Basic Trace Explainer, 97
batch, running NUSMV, 113
bit selection operator, 16
boolean type, 6
bool operator, 21
C
case expressions, 19
Commands for Bounded Model Checking,
68
Commands for checking PSL specifications,
84
comments in NUSMV language, 5
142
compassion constraints, 29
concatenation operator, 16
constant expressions, 9
CONSTANTS declarations, 26
context, 35
CTL specifications, 35
D
DD package interface, 99
declarations, 33
DEFINE : array, 26
DEFINE declarations, 26
defines, 12
definition of the FSM, 22
Displaying Traces, 94
E
Empty Trace, 99
enumeration types, 6
Execution Commands, 92
expressions, 8
basic expressions, 11
basic next, 20
case, 19
constants, 9
next, 20
sets, 18
simple, 20
extend operator, 17
F
fair execution paths, 29
fairness constraints, 29
fair paths, 29
frozen variables syntax, 24
I
identifiers, 31
if-then-else expressions, 19
IFF
logical and bitwise, 13
implicit type conversion, 9
IMPLIES
logical and bitwise, 13
Important Difference Between BDD and
SAT Based LTL Model Checking,
38
inclusion operator, 18
index subscript operator, 16
infinity, 40
INIT constraint, 27
Input File Syntax, 44
input variables syntax, 23, 25
Inspecting Traces, 94
integer type, 6
interactive, running NUSMV, 47
interactive shell, 47
interface to DD Package, 99
INVAR constraint, 27
Invariant Specifications, 37
INVARSPEC Specifications, 37
ISA declarations, 35
J
justice constraints, 29
K
keywords, 5
L
LTL Specifications, 37
M
main module, 33
master.nusmvrc, 114
model compiling, 48
model parsing, 48
model reading, 48
MODULE declarations, 30
MODULE instantiations, 30
N
namespaces, 33
next expressions, 20
NOT
logical and bitwise, 13
O
operator
mod, 15
operators
AND, 13
arithmetic, 14
bit selection, 16
cast, 20
count, 20
equality, 14
IFF, 13
IMPLIES, 13
inclusion, 18
index subscript, 16
inequality, 14
NOT, 13
OR, 13
precedence, 12
relational, 14
shift, 15
union, 17
word concatenation, 16
XNOR, 13
143
XOR, 13
options, 113
OR
logical and bitwise, 13
P
parentheses, 13
process, 33
processes, 33
process keyword, 33
PSL Specifications, 40
R
Real Time CTL Specifications and Computations,
39
resize operator, 17
S
Scalar Variables, 45
self, 32
set expressions, 17
set types, 7
Shell configuration Variables, 110
Shift Operator, 15
signed operator, 21
simple expressions, 20
Simulation Commands, 89
sizeof operator, 17
States/Variables Table, 98
state variables, 23
state variables syntax, 25
swconst operator, 21
syntax rules
complex identifiers, 31
identifiers, 5
main program, 33
module declarations, 30
symbolic constants, 6
type specifiers, 22
T
toint operator, 20
Trace Plugin Commands, 95
Trace Plugins, 97
Traces, 93
TRANS constraint, 27
Type conversion operators, 20
type order, 8
types, 6
array, 7
boolean, 6
enumerations, 6
implicit conversion, 9
integer, 6
ordering, 8
set, 7
word, 7
type specifiers, 22
U
unsigned operator, 21
uwconst operator, 21
V
variable declarations, 22
variables, 12
W
word1 operator, 21
word type, 7
X
XML Format Printer, 98
XML Format Reader, 99
XNOR
logical and bitwise, 13
XOR
logical and bitwise, 13
144