file:///Dave/Desktop%20Folder/cohen_1992
Psychological Bulletin © 1992 by the American Psychological Association
July 1992 Vol. 112, No. 1, 155-159 For personal use only--not for distribution.
A Power Primer
Jacob Cohen
New York University
ABSTRACT
One possible reason for the continued neglect of statistical power analysis in research in
the behavioral sciences is the inaccessibility of or difficulty with the standard material. A
convenient, although not comprehensive, presentation of required sample sizes is provided
here. Effect-size indexes and conventional values for these are given for operationally
defined small, medium, and large effects. The sample sizes necessary for .80 power to
detect effects at these levels are tabled for eight standard statistical tests: (a) the difference
between independent means, (b) the significance of a product—moment correlation, (c) the
difference between independent r s, (d) the sign test, (e) the difference between
independent proportions, (f) chi-square tests for goodness of fit and contingency tables, (g)
one-way analysis of variance, and (h) the significance of a multiple or multiple partial
correlation.
I am grateful to Patricia Cohen for her useful comments.
Correspondence may be addressed to Jacob Cohen, Department of Psychology, New York University, 6
Washington Place, 5th Floor, New York, New York, 10003.
Received: February 1, 1991
Revised: April 26, 1991
Accepted: May 2, 1991
The preface to the first edition of my power handbook ( Cohen, 1969 ) begins:
During my first dozen years of teaching and consulting on applied statistics with behavioral scientists, I
became increasingly impressed with the importance of statistical power analysis, an importance which
was increased an order of magnitude by its neglect in our textbooks and curricula. The case for its
importance is easily made: What behavioral scientist would view with equanimity the question of the
probability that his investigation would lead to statistically significant results, i.e., its power? (p. vii)
This neglect was obvious through casual observation and had been confirmed by a power review of the
1960 volume of the Journal of Abnormal and Social Psychology, which found the mean power to detect
file:///Dave/Desktop%20Folder/cohen_1992 (1 of 8) [06/01/2002 12:19:02]
file:///Dave/Desktop%20Folder/cohen_1992
medium effect sizes to be .48 ( Cohen, 1962 ). Thus, the chance of obtaining a significant result was
about that of tossing a head with a fair coin. I attributed this disregard of power to the inaccessibility of a
meager and mathematically difficult literature, beginning with its origin in the work of Neyman and
Pearson (1928 , 1933) .
The power handbook was supposed to solve the problem. It required no more background than an
introductory psychological statistics course that included significance testing. The exposition was
verbal—intuitive and carried largely by many worked examples drawn from across the spectrum of
behavioral science.
In the ensuing two decades, the book has been through revised (1977) and second (1988) editions and has
inspired dozens of power and effect-size surveys in many areas of the social and life sciences ( Cohen,
1988 , pp. xi—xii). During this period, there has been a spate of articles on power analysis in the social
science literature, a baker's dozen of computer programs (reviewed in Goldstein, 1989 ), and a
breakthrough into popular statistics textbooks ( Cohen, 1988 , pp. xii—xiii).
Sedlmeier and Gigerenzer (1989) reported a power review of the 1984 volume of the Journal of
Abnormal Psychology (some 24 years after mine) under the title, "Do Studies of Statistical Power Have
an Effect on the Power of Studies?" The answer was no. Neither their study nor the dozen other power
reviews they cite (excepting those fields in which large sample sizes are used, e.g., sociology, market
research) showed any material improvement in power. Thus, a quarter century has brought no increase in
the probability of obtaining a significant result.
Why is this? There is no controversy among methodologists about the importance of power analysis, and
there are ample accessible resources for estimating sample sizes in research planning using power
analysis. My 2-decades-long expectation that methods sections in research articles in psychological
journals would invariably include power analyses has not been realized. Indeed, they almost invariably
do not. Of the 54 articles Sedlmeier and Gigerenzer (1989) reviewed, only 2 mentioned power, and none
estimated power or necessary sample size or the population effect size they posited. In 7 of the studies,
null hypotheses served as research hypotheses that were confirmed when the results were nonsignificant.
Assuming a medium effect size, the median power for these tests was .25! Thus, these authors concluded
that their research hypotheses of no effect were supported when they had only a .25 chance of rejecting
these null hypotheses in the presence of substantial population effects.
It is not at all clear why researchers continue to ignore power analysis. The passive acceptance of this
state of affairs by editors and reviewers is even more of a mystery. At least part of the reason may be the
low level of consciousness about effect size: It is as if the only concern about magnitude in much
psychological research is with regard to the statistical test result and its accompanying p value, not with
regard to the psychological phenomenon under study. Sedlmeier and Gigerenzer (1989) attribute this to
the accident of the historical precedence of Fisherian theory, its hybridization with the contradictory
Neyman-Pearson theory, and the apparent completeness of Fisherian null hypothesis testing: objective,
file:///Dave/Desktop%20Folder/cohen_1992 (2 of 8) [06/01/2002 12:19:02]
file:///Dave/Desktop%20Folder/cohen_1992
mechanical, and a clearcut go—no-go decision straddled over p = .05. I have suggested that the neglect
of power analysis simply exemplifies the slow movement of methodological advance ( Cohen, 1988 , p.
xiv), noting that it took some 40 years from Student's publication of the t test to its inclusion in
psychological statistics textbooks ( Cohen, 1990 , p. 1311).
An associate editor of this journal suggests another reason: Researchers find too complicated, or do not
have at hand, either my book or other reference material for power analysis. He suggests that a short ruleof-thumb
treatment of necessary sample size might make a difference. Hence this article.
In this bare bones treatment, I cover only the simplest cases, the most common designs and tests, and
only three levels of effect size. For readers who find this inadequate, I unhesitatingly recommend
Statistic Power Analysis for the Behavioral Sciences ( Cohen, 1988 ; hereafter SPABS). It covers special
cases, one-sided tests, unequal sample sizes, other null hypotheses, set correlation and multivariate
methods and gives substantive examples of small, medium, and large effect sizes for the various tests. It
offers well over 100 worked illustrative examples and is as user friendly as I know how to make it, the
technical material being relegated to an appendix.
Method
Statistical power analysis exploits the relationships among the four variables involved in statistical
inference: sample size ( N ), significance criterion ( α ), population effect size (ES), and statistical power.
For any statistical model, these relationships are such that each is a function of the other three. For
example, in power reviews, for any given statistical test, we can determine power for given α , N and ES.
For research planning, however, it is most useful to determine the N necessary to have a specified power
for given α and ES; this article addresses this use.
The Significance Criterion, a
The risk of mistakenly rejecting the null hypothesis ( H 0 ) and thus of committing a Type I error, α ,
represents a policy: the maximum risk attending such a rejection. Unless otherwise stated (and it rarely
is), it is taken to equal .05 (part of the Fisherian legacy; Cohen, 1990 ). Other values may of course be
selected. For example, in studies testing several H 0 s, it is recommended that α = .01 per hypothesis in
order that the experimentwise risk (i.e., the risk of any false rejections) not become too large. Also, for
tests whose parameters may be either positive or negative, the α risk may be defined as two sided or one
sided. The many tables in SPABS provide for both kinds, but the sample sizes provided in this note are
all for two-sided tests at α = .01, .05, and .10, the last for circumstances in which a less rigorous standard
for rejection is desired, as, for example, in exploratory studies. For unreconstructed one tailers (see
Cohen, 1965 ), the tabled sample sizes provide close approximations for one-sided tests at ½ α (e.g.,
the sample sizes tabled under α = .10 may be used for one-sided tests at α = .05).
file:///Dave/Desktop%20Folder/cohen_1992 (3 of 8) [06/01/2002 12:19:02]
file:///Dave/Desktop%20Folder/cohen_1992
Power
The statistical power of a significance test is the long-term probability, given the population ES, α , and
N of rejecting H 0 . When the ES is not equal to zero, H 0 is false, so failure to reject it also incurs an
error. This is a Type II error, and for any given ES, α , and N, its probability of occurring is β . Power is
thus 1— β , the probability of rejecting a false H 0 .
In this treatment, the only specification for power is .80 (so β = .20), a convention proposed for general
use. (SPABS provides for 11 levels of power in most of its N tables.) A materially smaller value than .80
would incur too great a risk of a Type II error. A materially larger value would result in a demand for N
that is likely to exceed the investigator's resources. Taken with the conventional α = .05, power of .80
results in a β : α ratio of 4:1 (.20 to .05) of the two kinds of risks. (See SPABS, pp. 53—56.)
Sample Size
In research planning, the investigator needs to know the N necessary to attain the desired power for the
specified α and hypothesized ES. N increases with an increase in the power desired, a decrease in the ES,
and a decrease in α . For statistical tests involving two or more groups, N as here defined is the necessary
sample size for each group.
Effect Size
Researchers find specifying the ES the most difficult part of power analysis. As suggested above, the
difficulty is at least partly due to the generally low level of consciousness of the magnitude of
phenomena that characterizes much of psychology. This in turn may help explain why, despite the
stricture of methodologists, significance testing is so heavily preferred to confidence interval estimation,
although the wide intervals that usually result may also play a role ( Cohen, 1990 ). However, neither the
determination of power or necessary sample size can proceed without the investigator having some idea
about the degree to which the H 0 is believed to be false (i.e., the ES).
In the Neyman-Pearson method of statistical inference, in addition to the specification of H 0 , an
alternate hypothesis ( H 1 ) is counterpoised against H 0 . The degree to which H 0 is false is indexed by
the discrepancy between H 0 and H 1 and is called the ES. Each statistical test has its own ES index. All
the indexes are scale free and continuous, ranging upward from zero, and for all, the H 0 is that ES = 0.
For example, for testing the product—moment correlation of a sample for significance, the ES is simply
the population r, so H 0 posits that r = 0. As another example, for testing the significance of the departure
of a population proportion ( P ) from .50, the ES index is g = P − .50, so the H 0 is that g = 0. For the
tests of the significance of the difference between independent means, correlation coefficients, and
proportions, the H 0 is that the difference equals zero. Table 1 gives for each of the tests the definition of
its ES index.
file:///Dave/Desktop%20Folder/cohen_1992 (4 of 8) [06/01/2002 12:19:02]
file:///Dave/Desktop%20Folder/cohen_1992
To convey the meaning of any given ES index, it is necessary to have some idea of its scale. To this end,
I have proposed as conventions or operational definitions small, medium, and large values for each that
are at least approximately consistent across the different ES indexes. My intent was that medium ES
represent an effect likely to be visible to the naked eye of a careful observer. (It has since been noted in
effect-size surveys that it approximates the average size of observed effects in various fields.) I set small
ES to be noticeably smaller than medium but not so small as to be trivial, and I set large ES to be the
same distance above medium as small was below it. Although the definitions were made subjectively,
with some early minor adjustments, these conventions have been fixed since the 1977 edition of SPABS
and have come into general use. Table 1 contains these values for the tests considered here.
In the present treatment, the H 1 s are the ESs that operationally define small, medium, and large effects
as given in Table 1 . For the test of the significance of a sample r, for example, because the ES for this
test is simply the alternate-hypothetical population r, small, medium, and large ESs are respectively .10,
.30, and .50. The ES index for the t test of the difference between independent means is d, the difference
expressed in units of (i.e., divided by) the within-population standard deviation. For this test, the H 0 is
that d = 0 and the small, medium, and large ESs (or H 1 s) are d = .20, .50, and .80. Thus, an
operationally defined medium difference between means is half a standard deviation; concretely, for IQ
scores in which the population standard deviation is 15, a medium difference between means is 7.5 IQ
points.
Statistical Tests
The tests covered here are the most common tests used in psychological research:
q The t test for the difference between two independent means, with df = 2 ( N − 1).
q The t test for the significance of a product—moment correlation coefficient r, with df = N − 2.
q The test for the difference between two independent r s, accomplished as a normal curve test
through the Fisher z transformation of r (tabled in many statistical texts).
q The binomial distribution or, for large samples, the normal curve (or equivalent chi-square, 1 df )
test that a population proportion ( P ) = .50. This test is also used in the nonparametric sign test
for differences between paired observations.
q The normal curve test for the difference between two independent proportions, accomplished
through the arcsine transformation φ (tabled in many statistical texts). The results are effectively
the same when the test is made using the chi-square test with 1 degree of freedom.
q The chi-square test for goodness of fit (one way) or association in two-way contingency tables. In
file:///Dave/Desktop%20Folder/cohen_1992 (5 of 8) [06/01/2002 12:19:02]
file:///Dave/Desktop%20Folder/cohen_1992
Table 1 , k is the number of cells and P 0 i and P 1 i are the null hypothetical and alternate
hypothetical population proportions in cell i. (Note that w 's structure is the same as chi-square's
for cell sample frequencies.) For goodness-of-fit tests, the df = k − 1, and for contingency tables,
df = ( a − 1) ( b − 1), where a and b are the number of levels in the two variables. Table 2 provides
(total) sample sizes for 1 through 6 degrees of freedom.
q One-way analysis of variance. Assuming equal sample sizes (as we do throughout), for g groups,
the F test has df = g − 1, g ( N − 1). The ES index is the standard deviation of the g population
means divided by the common within-population standard deviation. Provision is made in Table 2
for 2 through 7 groups.
q Multiple and multiple partial correlation. For k independent variables, the significance test is the
standard F test for df = k, N - k − 1. The ES index, f 2 , is defined for either squared multiple or
squared multiple partial correlations ( R 2 ). Table 2 provides for 2 through 8 independent
variables.
Note that because all tests of population parameters that can be either positive or negative (Tests 1—5)
are two-sided, their ES indexes here are absolute values.
In using the material that follows, keep in mind that the ES posited by the investigator is what he or she
believes holds for the population and that the sample size that is found is conditional on the ES. Thus, if a
study is planned in which the investigator believes that a population r is of medium size (ES = r = .30
from Table 1 ) and the t test is to be performed with twosided α = .05, then the power of this test is .80 if
the sample size is 85 (from Table 2 ). If, using 85 cases, t is not significant, then either r is smaller then
.30 or the investigator has been the victim of the .20 ( β ) risk of making a Type II error.
Examples
The necessary N for power of .80 for the following examples are found in Table 2 .
q To detect a medium difference between two independent sample means ( d = .50 in Table 1 ) at α
= .05 requires N = 64 in each group. (A d of .50 is equivalent to a point-biserial correlation of
.243; see SPABS, pp. 22—24.)
q For a significance test of a sample r at α = .01, when the population r is large (.50 in Table 2 ), a
sample size = 41 is required. At α = .05, the necessary sample size = 28.
q To detect a medium-sized difference between two population r s ( q = .30 in Table 1 ) at α = .05
requires N = 177 in each group. (The following pairs of r s yield q = .30: .00, .29; .20, .46; .40,
file:///Dave/Desktop%20Folder/cohen_1992 (6 of 8) [06/01/2002 12:19:02]
file:///Dave/Desktop%20Folder/cohen_1992
.62; .60, .76; .80, .89; .90, .94; see SPABS, pp. 113—116)
q The sign test tests the H 0 that .50 of a population of paired differences are positive. If the
population proportion's departure from .50 is medium ( q = .15 in Table 1 ), at α = .10, the
necessary N = 67; at α = .05, it is 85.
q To detect a small difference between two independent population proportions ( h = .20 in Table 1
) at α = .05 requires N = 392 cases in each group. (The following pairs of P s yield approximate
values of h = .20: .05, .10; .20, .29; .40, .50; .60, .70; .80, .87; .90, .95; see SPABS, p. 184f.)
q A 3 × 4 contingency table has 6 degrees of freedom. To detect a medium degree of association in
the population ( w = .30 in Table 1 ) at α = .05 requires N = 151. ( w = .30 corresponds to a
contingency coefficient of .287, and for 6 degrees of freedom, a Cramèr φ of .212; see SPABS,
pp. 220—227).
q A psychologist considers alternate research plans involving comparisons of the means of either
three or four groups in both of which she believes that the ES is medium ( f = .25 in Table 1 ). She
finds that at α = .05, the necessary sample size per group is 52 cases for the three-group plan and
45 cases for the four-group plan, thus, total sample sizes of 156 and 180. (When f = .25, the
proportion of variance accounted for by group membership is .0588; see SPABS, pp. 280—284.)
q A psychologist plans a research in which he will do a multiple regression/correlation analysis and
perform all the significance tests at α = .01. For the F test of the multiple R 2 , he expects a
medium ES, that is, f 2 = .15 (from Table 1 ). He has a candidate set of eight independent variables
for which Table 2 indicates that the required sample size is 147, which exceeds his resources.
However, from his knowledge of the research area, he believes that the information in the eight
variables can be effectively summarized in three. For three variables, the necessary sample size is
only 108. (Given the relationship between f 2 and R 2 , the values for small, medium, and large R 2
are respectively .0196, .1304, and .2592, and for R, .14, .36, and .51; see SPABS, pp. 410—414.)
References
Cohen, J. (1962). The statistical power of abnormal—social psychological research: A review. Journal of
Abnormal and Social Psychology, 65, 145-153.
Cohen, J. (1965). Some statistical issues in psychological research.(In B. B. Wolman (Ed.), Handbook of
clinical psychology (pp. 95—121). New York: McGraw-Hill.)
Cohen, J. (1969). Statistical power analysis for the behavioral sciences. (San Diego, CA: Academic
Press)
Cohen, J. (1988). Statistical power analysis for the behavioral sciences (2nd ed.).(Hillsdale, NJ:
file:///Dave/Desktop%20Folder/cohen_1992 (7 of 8) [06/01/2002 12:19:02]
file:///Dave/Desktop%20Folder/cohen_1992
Erlbaum)
Cohen, J. (1990). Things I have learned (so far). American Psychologist, 45, 1304-1312.
Goldstein, R. (1989). Power and sample size via MS/PC-DOS computers. American Statistician, 43, 253-
260.
Neyman, J. & Pearson, E. S. (1928). On the use and interpretation of certain test criteria for purposes of
statistical inference. Biometrika, 20A, 263-294.
Neyman, J. & Pearson, E. S. (1933). On the problem of the most efficient tests of statistical hypotheses.
Transactions of the Royal Society of London Series A, 231, 289-337.
Sedlmeier, P. & Gigerenzer, G. (1989). Do studies of statistical power have an effect on the power of
studies? Psychological Bulletin, 105, 309-316.
Table 1.
Table 2.
file:///Dave/Desktop%20Folder/cohen_1992 (8 of 8) [06/01/2002 12:19:02]
http://spider.apa.org/ftdocs/bul/1992/july/S_bul1121155tbl1a.jpg
http://spider.apa.org/ftdocs/bul/1992/july/S_bul1121155tbl1a.jpg [06/01/2002 12:19:31]
http://spider.apa.org/ftdocs/bul/1992/july/S_bul1121155tbl2a.jpg
http://spider.apa.org/ftdocs/bul/1992/july/S_bul1121155tbl2a.jpg [06/01/2002 12:19:38]