U5 – vocabulary warm-up Complete the definitions with the words from the box: average hazardous cup amount constituent items tube initiate incubation carry 1 Analyte The __________(1) in the sample that is to be determined 2 Buttons They can be touched to either _______(2)an action or to move to a different screen. 3 Caution Indicates a possibly ___________(3) situation 4 Consumables ________(4) that are used during test processing and must be replaced on a regular basis 5 Dilution A procedure used to reduce the _________(5) of analyte in a sample so that it can be measured on the stored calibration curve. 6 Hitergent A surfactant which is added at each exchange of the _________(6) bath water. 7 Mean The __________(7)value of measurements. 8 Photomultiplier A light sensitive ________ (8) that collects and amplifies emitted photons from the ECL reaction and converts them into an electric signal. 9 Racks 5-position standard racks that must be used to ________ (9) sample tubes into the analyser. 10 Sample container A sample ______ (10) or a primary or secondary collection tube. U5 – vocabulary warm-up Complete the definitions with the words from the box: average hazardous cup amount constituent items tube initiate incubation carry 1 Analyte The __________(1) in the sample that is to be determined 2 Buttons They can be touched to either _______(2)an action or to move to a different screen. 3 Caution Indicates a possibly ___________(3) situation 4 Consumables ________(4) that are used during test processing and must be replaced on a regular basis 5 Dilution A procedure used to reduce the _________(5) of analyte in a sample so that it can be measured on the stored calibration curve. 6 Hitergent A surfactant which is added at each exchange of the _________(6) bath water. 7 Mean The __________(7)value of measurements. 8 Photomultiplier A light sensitive ________ (8) that collects and amplifies emitted photons from the ECL reaction and converts them into an electric signal. 9 Racks 5-position standard racks that must be used to ________ (9) sample tubes into the analyser. 10 Sample container A sample ______ (10) or a primary or secondary collection tube.