Chapter 8
Recombinant DNA
technology and
molecular cloning
Sometimes a good idea comes to you when you are
not looking for it. Through an improbable combination
of coincidences, naiveté and lucky mistakes, such a
revelation came to me one Friday night in April, 1983, as I
gripped the steering wheel of my car and snaked along a
moonlit mountain road into northern California’s redwood
country. That was how I stumbled across a process that could
make unlimited numbers of copies of genes, a process now
known as the polymerase chain reaction (PCR).
Kary B. Mullis, Scientific American (1990) 262:36.
Outline
8.1 Introduction
8.2 Historical perspective
Insights from bacteriophage lambda (l) cohesive
sites
Insights from bacterial restriction and
modification systems
The first cloning experiments
8.3 Cutting and joining DNA
Major classes of restriction endonucleases
Restriction endonuclease nomenclature
Recognition sequences for type II restriction
endonucleases
DNA ligase
Focus box 8.1 Fear of recombinant DNA molecules
8.4 Molecular cloning
Vector DNA
Choice of vector is dependent on insert size and
application
Plasmid DNA as a vector
Bacteriophage lambda (l) as a vector
Artificial chromosome vectors
Sources of DNA for cloning
Focus box 8.2 EcoRI: kinking and cutting DNA
Tool box 8.1 Liquid chromatography
8.5 Constructing DNA libraries
Genomic library
cDNA library
8.6 Probes
Heterologous probes
Homologous probes
Tool box 8.2 Complementary DNA (cDNA) synthesis
Tool box 8.3 Polymerase chain reaction (PCR)
Tool box 8.4 Radioactive and nonradioactive
labeling methods
Tool box 8.5 Nucleic acid labeling
8.7 Library screening
Transfer of colonies to a DNA-binding membrane
Colony hybridization
Detection of positive colonies
8.8 Expression libraries
8.9 Restriction mapping
8.10 Restriction fragment length polymorphism
(RFLP)
RFLPs can serve as markers of genetic diseases
Tool box 8.6 Electrophoresis
Tool box 8.7 Southern blot
Disease box 8.1 PCR-RFLP assay for maple syrup
urine disease
8.11 DNA sequencing
Manual DNA sequencing by the Sanger “dideoxy”
DNA method
Automated DNA sequencing
Chapter summary
Analytical questions
Suggestions for further reading
FMBC08 9/29/06 11:09 AM Page 180
8.1 Introduction
The cornerstone of most molecular biology technologies is the gene. To facilitate the study of genes, they
can be isolated and amplified. One method of isolation and amplification of a gene of interest is to clone the
gene by inserting it into another DNA molecule that serves as a vehicle or vector that can be replicated in
living cells. When these two DNAs of different origin are combined, the result is a recombinant DNA
molecule. Although genetic processes such as crossing-over technically produce recombinant DNA, the term
is generally reserved for DNA molecules produced by joining segments derived from different biological
sources. The recombinant DNA molecule is placed in a host cell, either prokaryotic or eukaryotic. The host
cell then replicates (producing a clone), and the vector with its foreign piece of DNA also replicates. The
foreign DNA thus becomes amplified in number, and following its amplification can be purified for further
analysis.
8.2 Historical perspective
In the early 1960s, before the advent of gene cloning, studies of genes often relied on indirect or fortuitous
discoveries, such as the ability of bacteriophages to incorporate bacterial genes into their genomes. For
example, a strain of phage phi 80 with the lac operator incorporated into its genome was used to
demonstrate that the Lac repressor binds specifically to this DNA sequence (see Fig. 10.12). The synthesis
of many disparate experimental observations into recombinant DNA technology occurred between 1972
and 1975, through the efforts of several research groups working primarily on bacteriophage lambda (λ).
Insights from bacteriophage lambda (l) cohesive sites
In 1962, Allan Campbell noted that the linear genome of bacteriophage λ forms a circle upon entering
the host bacterial cell, and a recombination (breaking and rejoining) event inserts the phage DNA into
the host chromosome. Reversal of the recombination event leads to normal excision of the phage DNA.
Rare excision events at different places can result in the incorporation of nearby bacterial DNA sequences
(Fig. 8.1). Further analysis revealed that phage λ had short regions of single-stranded DNA whose base
sequences were complementary to each other at each end of its linear genome. These single-stranded
regions were called “cohesive” (cos) sites. Complementary base pairing of the cos sites allowed the linear
genome to become a circle within the host bacterium. The idea of joining DNA segments by “cohesive
sites” became the guiding principle for the development of genetic engineering. With the molecular
characterization of restriction and modification systems in bacteria, it soon became apparent that the ideal
engineering tools for making cohesive sites on specific DNA pieces were already available in the form of
restriction endonucleases.
Insights from bacterial restriction and modification systems
Early on, Salvador Luria and other phage workers were intrigued by a phenomenon termed “restriction
and modification.” Phages grown in one bacterial host often failed to grow in different bacterial strains
(“restriction”). However, some rare progeny phages were able to escape this restriction. Once produced in
the restrictive host they had become “modified” in some way so that they now grew normally in this host.
The entire cycle could be repeated, indicating that the modification was not an irreversible change. For
example, phage λ grown on the C strain of Escherichia coli (λ·C) were restricted in the K-12 strain (the
standard strain for most molecular work) (Fig. 8.2). However, the rare phage λ that managed to grow in the
K-12 strain now had “K” modification (λ·K). These phages grew normally on both C and K-12; however,
after growth on C, the phage λ with “C” modification (λ·C) was again restricted in K-12. Thus, the K-12
strain was able to mark its own resident DNA for preservation, but could eliminate invading DNA from
another distantly related strain. In 1962, the molecular basis of restriction and modification was defined by
Werner Arber and co-workers.
Recombinant DNA technology and molecular cloning 181
FMBC08 9/29/06 11:09 AM Page 181
Restriction system
After demonstrating that phage λ DNA was degraded in a restricting host bacterium, Arber and co-workers
hypothesized that the restrictive agent was a nuclease with the ability to distinguish whether DNA was
resident or foreign. Six years later, such a nuclease was biochemically characterized in E. coli K-12 by Matt
Chapter 8182
Phage induction and
replication
Phage λ
E. coli genome
Injection of linear
phage λ DNA
Linear phage λ
DNA (50,000 bp)
Joined cos sites
Circular phage λ DNA
Att site
Bacterial
gene
E. coli genome
Recombination of
phage λ and E. coli DNA
Cuts for normal phage excision
Cuts for excision of phage λ with
bacterial gene
Lysis of
E. coli cell
Encapsulation of phage
Progeny phage λ with
bacterial gene
+
cos sitescos sites
Figure 8.1 Bacteriophage lambda (λλ) cohesive sites. Following the injection of a linear phage λ DNA into
E. coli host cells, the phage λ genome circularizes by joining of the cohesive (cos) sites. In the lysogenic mode of
replication, phage DNA is incorporated into the host genome by recombination at attachment (Att) sites on the phage
and bacterial chromosome, and replicated as part of the host DNA. Under certain conditions, such as when the host
encounters mutagenic chemicals or UV radiation, reversal of this recombination event leads to excision of the phage
DNA. Rare excision events at different places allow phage λ to pick up bacterial genes. In the lytic mode of the phage
life cycle, phage λ progeny with bacterial genes incorporated in their genomes are released from the lysed E. coli.
FMBC08 9/29/06 11:09 AM Page 182
Recombinant DNA technology and molecular cloning 183
Meselson and Bob Yuan. The purified enzyme cleaved λ·C-modified DNA into about five pieces but did
not attack λ·K-modified DNA (Fig. 8.2). Restriction endonucleases (also referred to simply as restriction
enzymes) thus received their name because they restrict or prevent viral infection by degrading the invading
nucleic acid.
Phage λ.K
Phage λ.C
Methylase Restriction
endonuclease
A
AT
T
E-coli genome
E-coli host strain K-12
infected by phage λ.C
E-coli host strain K-12
infected by phage λ.K
"Restriction" of λ.C DNA
"Modification" of replicating
λ.K DNA
λ.K progeny are
produced
No λ.C progeny
Methylated DNA is not cleaved
Unmethylated DNA is cleaved
λ.K DNA
λ.C DNA
(A)
(B)
CH3
CH3
CH3
CH
3
CH3
CH3
CH3
CH 3
CH
3
CH3
CH3
CH
3
CH
3
CH3
CH3
CH3
CH 3
CH 3
CH 3
CH 3
CH3
CH
3
CH3
CH
3
CH3
CH3
CH
3
CH
3
CH
3
CH
3
CH3
A
AT
T
A
AT
T
A
AT
TA
AT
T
A
A
T
A
AT
T
A
AT
T
A
A
T
T
A
AT
T
A
T
T
A
AT
T
A
AT
T
A
AT
T
A
AT
T
A
AT
T
Methylase Restriction
endonuclease
E-coli genome
A
AT
T
A
AT
T
A
AT
T
A
T
Figure 8.2 Restriction and modification systems in bacteria. Restriction endonucleases and their
corresponding methylases function in bacteria to protect against bacteriophage infection. (A) Modification. When E.
coli host strain K-12 is infected by phage λ·K, the phage DNA is not recognized as foreign because it has the same
methylation pattern as the E. coli host genome. When the phage DNA replicates, the newly replicated DNA is
modified by a specific methylase to maintain the pattern. Methylated DNA is not cleaved by restriction endonucleases,
so progeny phage λ·K are produced. (B) When E. coli host strain K-12 is infected by phage λ·C, the phage DNA is
recognized as foreign, because it does not have the same methylation pattern as the host genome. The phage DNA is
cleaved by a specific restriction endonuclease, and no progeny phage λ·C are produced.
FMBC08 9/29/06 11:09 AM Page 183
Modification system
At the time, it was known that methyl groups were added to bacterial DNA at a limited number of sites.
Most importantly, the location of methyl groups varied among bacterial species. Arber and colleagues were
able to demonstrate that modification consisted of the addition of methyl groups to protect those sites in
DNA sensitive to attack by a restriction endonuclease. In E. coli, adenine methylation (6-methyl adenine) is
more common than cytosine methylation (5-methyl cytosine). Methyl-modified target sites are no longer
recognized by restriction endonucleases and the DNA is no longer degraded. Once established, methylation
patterns are maintained during replication. When resident DNA replicates, the old strand remains
methylated and the new strand is unmethylated. In this hemimethylated state, the new strand is quickly
methylated by specific methylases. In contrast, foreign DNA that is unmethylated or has a different pattern
of methylation than the host cell DNA is degraded by restriction endonucleases.
The first cloning experiments
Hamilton Smith and co-workers demonstrated unequivocally that restriction endoncleases cleave a specific
DNA sequence. Later, Daniel Nathans used restriction endonucleases to map the simian virus 40 (SV40)
genome and to locate the origin of replication. These major breakthroughs underscored the great potential
of restriction endonucleases for DNA work. Building on their discoveries, the cloning experiments of
Herbert Boyer, Stanley Cohen, Paul Berg, and their colleagues in the early 1970s ushered in the era of
recombinant DNA technology. One of the first recombinant DNA molecules to be engineered was a hybrid
of phage λ and the SV40 mammalian DNA virus genome. In 1974 the first eukaryotic gene was cloned.
Amplified ribosomal RNA (rRNA) genes or “ribosomal DNA” (rDNA) from the South African clawed
frog Xenopus laevis were digested with a restriction endonuclease and linked to a bacterial plasmid. Amplified
rDNA was used as the source of eukaryotic DNA since it was well characterized at the time and could
be isolated in quantity by CsCl-gradient centrifugation. Within oocytes of the frog, rDNA is selectively
amplified by a rolling circle mechanism from an extrachromosomal nucleolar circle (see Fig. 6.17). The
number of rRNA genes in the oocyte is about 100- to 1000-fold greater than within somatic cells of the
same organism. To the great excitement of the scientific community, the cloned frog genes were actively
transcribed into rRNA in E. coli. This showed that recombinant plasmids containing both eukaryotic and
prokaryotic DNA replicate stably in E. coli. Thus, genetic engineering could produce new combinations of
genes that had never appeared in the natural environment, a feat which led to widespread concern about the
safety of recombinant DNA work (Focus box 8.1).
8.3 Cutting and joining DNA
Two major categories of enzymes are important tools in the isolation of DNA and the preparation of
recombinant DNA: restriction endonucleases and DNA ligases. Restriction endonucleases recognize a
specific, rather short, nucleotide sequence on a double-stranded DNA molecule, called a restriction site, and
cleave the DNA at this recognition site or elsewhere, depending on the type of enzyme. DNA ligase joins
two pieces of DNA by forming phosphodiester bonds.
Major classes of restriction endonucleases
There are three major classes of restriction endonucleases. Their grouping is based on the types of sequences
recognized, the nature of the cut made in the DNA, and the enzyme structure. Type I and III restriction
endonucleases are not useful for gene cloning because they cleave DNA at sites other than the recognition
sites and thus cause random cleavage patterns. In contrast, type II endonucleases are widely used for mapping
and reconstructing DNA in vitro because they recognize specific sites and cleave just at these sites (Table 8.1).
In addition, the type II endonuclease and methylase activities are usually separate, single subunit enzymes.
Although the two enzymes recognize the same target sequence, they can be purified separately from each
Chapter 8184
FMBC08 9/29/06 11:09 AM Page 184
Recombinant DNA technology and molecular cloning 185
other. Some type II restriction endonucleases do not conform to this narrow definition, making it necessary
to define further subdivisions. The discussion here will focus on the “orthodox” type II restriction
endonucleases that are commonly used in molecular biology research.
Restriction endonclease nomenclature
Restriction endonucleases are named for the organism in which they were discovered, using a system of
letters and numbers. For example, HindIII (pronounced “hindee-three”) was discovered in Haemophilus
In the wake of the first cloning experiments, there was
immediate concern from both scientists and the general
public about the possible dangers of recombinant DNA
work. Concerns primarily focused on the ethics of
“tampering with nature” and the potential for the escape
of genetically engineered pathogenic bacteria from a
controlled laboratory environment. One fear was that E. coli
carrying cloned tumor virus DNA could be transferred to
humans and trigger a global cancer epidemic. Not everyone
shared these fears. James Watson wrote in his chapter in
the book Genetics and Society (1993):
I was tempted then to put together a book called the
Whole Risk Catalogue. It would contain risks for old
people and young people and so on. It would be a very
popular book in our semi-paranoid society. Under “D”
I would put dynamite, dogs, doctors, dieldrin [an
insecticide] and DNA. I must confess to being more
frightened of dogs. But everyone has their own things
to worry about.
In 1975 a landmark meeting was held at the Asilomar
Conference Center near San Francisco. The meeting
was attended by over 100 molecular biologists.
Recommendations arising from this meeting formed the
basis for official guidelines developed by the National
Institutes of Health (NIH) regarding containment. As time
passed, there were no disasters that occurred as a result
of recombinant DNA technology, and it was concluded by
most scientists that under these guidelines the technology
itself did not pose any risk to human health or the
environment. Containment works very well and engineered
bacteria and vectors do very poorly under natural
conditions.
Currently, activities involving the handling of recombinant
DNA molecules and organisms must be conducted in
accordance with the NIH Guidelines for Research Involving
Recombinant DNA Molecules. Four levels of risk are
recognized, from minimal to high, for which four levels of
containment (physical and biological barriers to the escape
of dangerous organisms) are outlined. The highest risk level
is for experiments dealing with highly infectious agents and
toxins that are likely to cause serious or lethal human
disease for which preventive or therapeutic interventions
are not usually available. Precautions include negativepressure
air locks in laboratories and experiments done in
laminar-flow hoods, with filtered or incinerated exhaust air.
The bacteria used routinely in molecular biology, such as
nonpathogenic strains of E. coli, are “Risk group I” agents,
which are not associated with disease in healthy adult
humans. Standard vectors for recombinant DNA are
genetically designed to decrease, by many orders of
magnitude, the probability of dissemination of recombinant
DNA outside the laboratory.
Today, fears focus not so much on the technology per se,
but on the application of recombinant DNA technology to
agriculture, medicine, and bioterrorism. For example, there
is concern about the safety of genetically engineered foods
in the marketplace, the spread of herbicide-resistant genes
from transgenic crop plants to weeds, the use of gene
therapy for eugenics (artificial human selection), and the
construction of recombinant DNA “designer weapons.” The
latter refers to engineering infectious microbes to be even
more virulent, antibiotic-resistant, and environmentally
stable. On December 13, 2002, new federal regulations were
published to implement the US Public Health and Security
and Bioterroism Preparedness and Response Act of 2002
(http://www.fda.gov/oc/bioterrorism/bioact.html). The
regulations apply to the possession, use, and transfer of
select agents that are considered potential bioterrorist
agents, such as Yersinia pesti (plague), Bacillus anthracis
(anthrax), and variola virus (smallpox).
Fear of recombinant DNA molecules F O C U S B O X 8 . 1
FMBC08 9/29/06 11:09 AM Page 185
influenza (strain d). The Hin comes from the first letter of the genus name and the first two letters of the
species name; d is for the strain type; and III is for the third enzyme of that type. SmaI is from Serratia
marcescens and is pronounced “smah-one,” EcoRI (pronounced “echo-r-one”) was discovered in Escherichia
coli (strain R), and BamHI is from Bacillus amyloliquefaciens (strain H). Over 3000 type II restriction
endonucleases have been isolated and characterized to date. Approximately 240 are available commercially
for use by molecular biologists.
Recognition sequences for type II restriction endonucleases
Each orthodox type II restriction endonuclease is composed of two identical polypeptide subunits that join
together to form a homodimer. These homodimers recognize short symmetric DNA sequences of 4–8 bp.
Six base pair cutters are the most commonly used in molecular biology research. Usually, the sequence read
in the 5′ → 3′ direction on one strand is the same as the sequence read in the 5′ → 3′ direction on the
complementary strand. Sequences that read the same in both directions are called palindromes (from the
Greek word palindromos for “run back”). Figure 8.3 shows some common restriction endonucleases and their
recognition sequences. Some enzymes, such as EcoR1, generate a staggered cut, in which the single-stranded
complementary tails are called “sticky” or cohesive ends because they can hydrogen bond to the singlestranded
complementary tails of other DNA fragments. If DNA molecules from different sources share the
same palindromic recognition sites, both will contain complementary sticky ends (single-stranded tails)
when digested with the same restriction endonuclease. Other type II enzymes, such as SmaI, cut both
strands of the DNA at the same position and generate blunt ends with no unpaired nucleotides when they
cleave the DNA.
Restriction endonucleases exhibit a much greater degree of sequence specificity in the enzymatic reaction
than is exhibited in the binding of regulatory proteins, such as the Lac repressor to DNA (see Section 10.6).
For example, a single base pair change in a critical operator sequence usually reduces the affinity of the
Lac repressor by 10- to 100-fold, whereas a single base pair change in the recognition site of a restriction
endonuclease essentially eliminates all enzymatic activity.
Like other DNA-binding proteins, the first contact of a restriction endonuclease with DNA is nonspecific
(Fig. 8.4). Nonspecific binding usually does not involve interactions with the bases but only with the DNA
sugar–phosphate backbone. The restriction endonuclease is loosely bound and its catalytic center is kept at a
safe distance from the phosphodiester backbone. Nonspecific binding is a prerequisite for efficient target site
location. For example, BamHI moves along the DNA in a linear fashion by a process called “sliding.” Sliding
involves helical movement due to tracking along a groove of the DNA over short distances (< 30–50 bp).
This reduces the volume of space through which the protein needs to search to one dimension. However,
the “random walk” nature of linear diffusion gives equal probabilities for forward and reverse steps, so if the
distances between the nonspecific binding site and the recognition site are large (> 30–50 bp), the protein
Chapter 8186
Table 8.1 Major classes of restriction endonucleases.
Class
Type I
Type II
Type III
Abundance
Less common
than type II
Most common
Rare
Recognition site
Cut both strands at a
nonspecific location > 1000 bp
away from recognition site
Cut both strands at a specific,
usually palindromic, recognition
site (4–8 bp)
Cleavage of one strand only,
24–26 bp downstream of the 3′
recognition site
Composition
Three-subunit complex: individual
recognition, endonuclease, and
methylase activities
Endonuclease and methylase are
separate, single-subunit enzymes
Endonuclease and methylase are
separate two-subunit complexes with
one subunit in common
Use in recombinant
DNA research
Not useful
Very useful
Not useful
i
FMBC08 9/29/06 11:09 AM Page 186
would return repeatedly to its start point. The main mode of translocation over long distances is thus by
“hopping” or “jumping.” In this process, the protein moves between binding sites through three-dimensional
space, by dissociating from its initial site before reassociating elsewhere in the same DNA chain. Because
of relatively small diffusion constants of proteins, most rebinding events will be short range “hops” back to
or near the initial binding site. In the example of BamHI, once the target restriction site is located, the
recognition process triggers large conformational changes of the enzyme and the DNA (called coupling),
which leads to the activation of the catalytic center (Fig. 8.4). In addition to indirect interaction with the DNA
backbone, specific binding is characterized by direct interaction of the enzyme with the nitrogenous bases.
All structures of orthodox type II restriction endonucleases characterized by X-ray crystallography so far
show a common structural core composed of four conserved β-strands and one α-helix (Focus box 8.2). In
the presence of the essential cofactor Mg2+
, the enzyme cleaves the DNA on both strands at the same time
within or in close proximity to the recognition sequence (restriction site). The enzyme cuts the DNA
Recombinant DNA technology and molecular cloning 187
A A
A A
G
G
C
C
T T
TT
G
C
G
C
G
CG
C
G
C
G
C
G
C G
C
A
A
TT
T T C
C
G
G
A
A
T
T T
T
A
A
A
A
G
C
G
C
G
C G
C
G
C
G
C
A
T
A
T A
T
A
T
G
C
G
C G
C
G
CA
T A
T
G
C G
C
C
C T
T
A
A
G
GG
C G
C
5′
5′
5′
5′
5′
3′
5′
3′
5′
3′
5′
3′
5′
3′
3′
5′
3′
5′
3′
5′
3′
5′
3′
5′
3′
5′
3′
5′
3′
3′
3′
3′
Enzyme Recognition,
cleavage site
HindIII
SmaI
EcoRI
BamHI
OH
OH
OH
OH
OH
OH
OH
OH
PO4
–
PO4
–
PO4
–
PO4
–
PO4
–
PO4
–
PO4
–
PO4
–
Figure 8.3 Cleavage patterns of some common restriction endonucleases. The recognition and cleavage
sites, and cleavage patterns of HindIII, SmaI, EcoRI, and BamHI are shown. Restriction endonucleases catalyze the
hydrolysis of phosphodiester bonds in palindromic DNA sequences to produce double-strand breaks, resulting in the
formation of 5′-PO4
−
and 3′-OH termini with “sticky” ends (HindIII, EcoRI, and BamHI) or “blunt” ends (SmaI).
FMBC08 9/29/06 11:09 AM Page 187
5'
3'
3'
5'
G G
G G
A CT
T A
C
CC
G G
G G
A CT
T A
C
CC
G
C G G
A CT
T A
CC
C
G
C G G
A CT
T A
CC
C
G
G G G
A CT
T A
CC
C
5'
3'
3'
5'
G G
Product release
Catalysis
Coupling
Sliding
Hopping/jumping
+
G G
A CT
T A
C
CC
DNA
Free
Non specific
Specific
Restriction endonuclease
BamHI
Nonspecific binding
Specific binding
Figure 8.4 The steps involved in DNA binding and cleavage by a type II restriction endonuclease.
Type II restriction endonucleases, like BamHI, bind DNA as dimers. The first contact with DNA is nonspecific. The
target site is then located by a combination of linear diffusion or “sliding” of the enzyme along the DNA over short
distances, and hopping/jumping over longer distances. Once the target restriction site is located, the recognition
process (coupling) triggers large conformational changes of the enzyme and the DNA, which leads to activation of the
catalytic center. Catalysis results in product release. (Pingoud, A., Jeltsch, A. 2001. Structure and function of type II
restriction endonucleases. Nucleic Acids Research 29:3705–3727; and Gowers, D.M., Wilson, G.G., Halford, S.E. 2005.
Measurement of the contributions of 1D and 3D pathways to the translocation of a protein along DNA. Proceedings
of the National Academy of Sciences USA 102:15883–15888.) (Inset) Structures of free, nonspecific, and specific
DNA-bound forms of BamHI. The two dimers are shown in brown, the DNA backbone is in green and the bases in
gray. BamHI becomes progressively more closed around the DNA as it goes from the nonspecific to specific DNA
binding mode. (Protein Data Bank, PDB:1ESG. Adapted from Viadiu, H., Aggarwal, A.K. 2000. Structure of BamHI
bound to nonspecific DNA: a model for DNA sliding. Molecular Cell 5:889–895. Copyright © 2000, with permission
from Elsevier.)
FMBC08 9/29/06 11:09 AM Page 188
duplex by breaking the covalent, phosphodiester bond between the phosphate of one nucleotide and the
sugar of an adjacent nucleotide, to give free 5′-phosphate and 3′-OH ends. Type II restriction endonucleases
do not require ATP hydrolysis for their nucleolytic activity. Although there are a number of models for how
this nucleophilic attack on the phosphodiester bond occurs (Focus box 8.2), the exact mechanism by which
restriction endonucleases achieve DNA cleavage has not yet been proven experimentally for any type II
restriction endonuclease.
DNA ligase
The study of DNA replication and repair processes led to the discovery of the DNA-joining enzyme called
DNA ligase. DNA ligases catalyze formation of a phosphodiester bond between the 5′-phosphate of a
nucleotide on one fragment of DNA and the 3′-hydroxyl of another (see Fig. 6.14). This joining of linear
DNA fragments together with covalent bonds is called ligation. Unlike the type II restriction endonucleases,
DNA ligase requires ATP as a cofactor.
Because it can join two pieces of DNA, DNA ligase became a key enzyme in genetic engineering.
If restriction-digested fragments of DNA are placed together under appropriate conditions, the DNA
fragments from two sources can anneal to form recombinant molecules by hydrogen bonding between the
complementary base pairs of the sticky ends. However, the two strands are not covalently bonded by
phosphodiester bonds. DNA ligase is required to seal the gaps, covalently bonding the two strands and
regenerating a circular molecule. The DNA ligase most widely used in the lab is derived from the
bacteriophage T4. T4 DNA ligase will also ligate fragments with blunt ends, but the reaction is less efficient
and higher concentrations of the enzyme are usually required in vitro. To increase the efficiency of the
reaction, researchers often use the enyzme terminal deoxynucleotidyl transferase to modify the blunt ends.
For example, if a single-stranded poly(dA) tail is added to DNA fragments from one source, and a singlestranded
poly(dT) tail is added to DNA from another source, the complementary tails can hydrogen bond
(Fig. 8.5). Recombinant DNA molecules can then be created by ligation.
8.4 Molecular cloning
The basic procedure of molecular cloning involves a series of steps. First, the DNA fragments to be cloned
are generated by using restriction endonucleases, as described in Section 8.3. Second, the fragments
produced by digestion with restriction enzymes are ligated to other DNA molecules that serve as vectors.
Vectors can replicate autonomously (independent of host genome replication) in host cells and facilitate the
manipulation of the newly created recombinant DNA molecule. Third, the recombinant DNA molecule
is transferred to a host cell. Within this cell, the recombinant DNA molecule replicates, producing dozens
of identical copies known as clones. As the host cells replicate, the recombinant DNA is passed on to all
progeny cells, creating a population of identical cells, all carrying the cloned sequence. Finally, the cloned
DNA segments can be recovered from the host cell, purified, and analyzed in various ways.
Vector DNA
Cloning vectors are carrier DNA molecules. Four important features of all cloning vectors are that they: (i)
can independently replicate themselves and the foreign DNA segments they carry; (ii) contain a number of
unique restriction endonuclease cleavage sites that are present only once in the vector; (iii) carry a selectable
marker (usually in the form of antibiotic resistance genes or genes for enzymes missing in the host cell) to
distinguish host cells that carry vectors from host cells that do not contain a vector; and (iv) are relatively
easy to recover from the host cell. There are many possible choices of vector depending on the purpose of
cloning. The greatest variety of cloning vectors has been developed for use in the bacterial host E. coli.
Thus, the first practical skill generally required by a molecular biologist is the ability to grow pure cultures
of bacteria.
Recombinant DNA technology and molecular cloning 189
FMBC08 9/29/06 11:09 AM Page 189
EcoRI functions as a homodimer of two identical 31,000
molecular weight subunits and catalyzes the cleavage of a
double-stranded sequence d(GAATTC). The interaction of
the restriction endonuclease EcoRI with DNA illustrates how
subtle features of its shape and surface characteristics allow
it to interact with complementary surfaces on the DNA.
The crystal structure of EcoRI complexed with a 12 bp
DNA duplex was determined in 1986. One dimer contains a
F O C U S B O X 8 . 2 EcoRI: kinking and cutting DNA
A112
O2P
O1P
2.02Å
1.82Å
1.94Å
1.90Å
2.07Å
1.85Å
D91
E111
WA
WA
WA
WX
WC
WA
A112A
E111A
K113A
H114A
O115A
G116A
E144BR145A
D91A
G
A
A
T
G
A
A
G
A
A
R145
R145
K113 K113
D91
D91
E111 E111
A112
A112
H114
H114O1P
Mg2+
Mg2+
i ii
iii iv
(A) (B)
Figure 1 Structure of EcoRI. (A) Crystal structure of the two subunits (green and light orange) of EcoRI bound to DNA (blue).
In one subunit the four strictly conserved β-strands and one α-helix of the common core are shown in red. (Protein Data Bank,
PDB:1ERI. Adapted from Pingoud, A. and Jeltsch, A. 2001. Structure and function of type II restriction endonucleases. Nucleic
Acids Research 29:3705–3727. Copyright © 2001, with permission of the Oxford University Press.). (B) Catalytic centers of the
EcoRI–DNA complex. (i) Coordination of Mg2+
by six ligands in the catalytic center: one carboxylate oxygen of the glutamic acid
at position 111 (E111); two carboxylate oxygens of asparagine 91 (D91); the main-chain carbonyl of alanine 112 (A112); the O1P
oxygen of the scissile phosphate GpAA (to polarize the phosphate and facilitate nucleophilic attack); and a water molecule, WA, that
forms the attacking nucleophile. (ii) Catalytic and recognition elements of the crystal structure of the Mg2+
-free EcoRI–DNA
complex. The letters following the side chain numbers denote protein subunits A and B. Only one DNA strand (orange) is shown
for part of the recognition site. (iii and iv) The EcoRI–DNA complexes in the absence (iii) and presence (iv) of Mg2+
. The black
arrow in (iv) shows the direction of nucleophilic attack on phosphorus. The presence of Mg2+
causes a number of structural
changes, including alteration of the position and orientation of the water molecules WA and WC, movement of D91, and movement
of lysine 113 (K113) away from its hydrogen-bonding partner E111. (Reproduced from Kurpiewski, M.R., Engler, L.E., Wozniak,
L.A., Kobylanska, A., Koziolkiewicz, M., Stec, W.J., Jen-Jacobsen, L. 2004. Mechanisms of coupling between DNA recognition
and specificity and catalysis in EcoRI endonuclease. Structure 12:1775–1788. Copyright © 2004, with permission from Elsevier.)
Chapter 8190
FMBC08 9/29/06 11:09 AM Page 190
conserved four-stranded b-sheet surrounded on either side
by a-helices (Fig. 1). The active site of the endonuclease
lies at the C-terminus of this parallel b-sheet and forms a
catalytic center, in which Mg2+ is bound by interaction with
six amino acids (b2 and b3 contain the amino acid residues
directly involved in catalysis). Upon specific DNA binding,
about 150 water molecules are released; this expulsion
of solvent molecules from the interface allows for close
contact between the enzyme and the DNA. The N-terminus
of the protein forms an arm that partially wraps around the
DNA. A bundle of four parallel a-helices, two from each
dimer, pushes into the major groove and directly recognizes
the DNA base sequence. A major portion of the sequence
specificity exhibited by this enzyme appears to be achieved
through an array of 12 hydrogen bond donors and acceptors
from protein side chains. These donors and acceptors are
complementary to the donors and acceptors presented by
the exposed edges of the base pairs in the hexanucleotide
recognition sequence.
The binding of EcoRI to its recognition site induces a
dramatic conformational change not only in the enzyme
itself, but also in the DNA. A central kink (or bend) of about
20–40° in the DNA brings the critical phosphodiester bond
between G and A deeper into the active site. The kink is
accompanied by unwinding of the DNA. This unwinding of
the top 6 bp relative to the bottom 6 bp results in a widening
of the major groove by about 3.5 Å. The widening allows the
two a-helices from each subunit of the dimer to fit (end on)
into the major groove. Further, the realignment of base
pairs produced by the kink creates sites for multiple
hydrogen bonds with the protein not present in the
undistorted DNA. Thus, the protein-induced distortions
of the DNA are an intimate part of the recognition and
catalysis process.
EcoRI: kinking and cutting DNA F O C U S B O X 8 . 2
Choice of vector is dependent on insert size and application
The classic cloning vectors are plasmids, phages, and cosmids, which are limited to the size insert they can
accommodate, taking up to 10, 20, and 45 kb, respectively (Table 8.2). The feature of plasmids and phages and
their use as cloning vectors will be discussed in more detail in later sections. A cosmid is a plasmid carrying a
Recombinant DNA technology and molecular cloning 191
Table 8.2 Principal features and applications of different cloning vector systems.
Vector
Plasmid
Phage
Cosmid
BAC (bacterial artificial
chromosome)
YAC (yeast artificial
chromosome)
MAC (mammalian
artificial chromosome)
Basis
Naturally occuring multicopy
plasmids
Bacteriophage λ
Plasmid containing a bacteriophage
λ cos site
Escherichia coli F factor plasmid
Saccharomyces cerevisiae centromere,
telomere, and autonomously
replicating sequence
Mammalian centromere, telomere,
and origin of replication
Size limits of insert
≤ 10 kb
5–20 kb
35–45 kb
75–300 kb
100–1000 kb (1 Mb)
100 kb to > 1 Mb
Major application
Subcloning and downstream
manipulation, cDNA cloning and
expression assays
Genomic DNA cloning, cDNA
cloning, and expression libraries
Genomic library construction
Analysis of large genomes
Analysis of large genomes, YAC
transgenic mice
Under development for use in
animal biotechnology and human
gene therapy
i
FMBC08 9/29/06 11:09 AM Page 191
phage λ cos site, allowing it to be packaged into a phage head. Cosmids infect a host bacterium as do phages,
but replicate like plasmids and the host cells are not lysed. Mammalian genes are often greater than 100 kb
in size, so originally there were limitations in cloning complete gene sequences. Vectors engineered more
recently have circumvented this problem by mimicking the properties of host cell chromosomes. This new
generation of artificial chromosome vectors includes bacterial artificial chromosomes (BACs), yeast artificial
chromosomes (YACs), and mammalian artificial chromosomes (MACs).
Plasmid DNA as a vector
Plasmids are naturally occurring extrachromosomal double-stranded circular DNA molecules that carry
an origin of replication and replicate autonomously within bacterial cells (see Section 3.4). The plasmid
vector pBR322, constructed in 1974, was one of the first genetically engineered plasmids to be used in
Chapter 8192
G
C
G
C
G
C
5′
5′
3′
3′
G
C
G
C
G
C
G
C
G
C
G
C
5′
5'
3′
3′
G
C
G
C
G
C
G
C
G
C
G
CG
C
G
C
G
C A
T
A
T
A
T
5′
5′
3′
3′
G
C
G
C
G
CG
C
G
C
G
C A
T
A
T
A
T
5′
5′
3′
3′
Source 1 DNA Source 2 DNA
Add poly (dT) tails Add poly (dA) tails
Terminal
deoxynucleotidyl transferase
T T T
A AA
Ligation with DNA ligase
Annealing of
fragments
Figure 8.5 Modified blunt end ligation. Recombinant DNA molecules can be formed from DNA cut with
restriction endonucleases that leave blunt ends, such as SmaI. Without end modification, blunt end ligation is of low
efficiency. The efficiency is increased through using the enzyme terminal deoxynucleotidyl transferase to create
complementary tails by the addition of poly(dA) and poly(dT) to the cleaved fragments. These tails allow DNA
fragments from two different sources to anneal. “Source 1” DNA and “source 2” DNA are then covalently linked by
treatment with DNA ligase to create a recombinant DNA molecule. Note that the SmaI site is destroyed in the
process.
FMBC08 9/29/06 11:09 AM Page 192
recombinant DNA. Plasmids are named with a system of uppercase letters and numbers, where the lowercase
“p” stands for “plasmid.” In the case of pBR322, the BR identifies the original constructors of the vector
(Bolivar and Rodriquez), and 322 is the identification number of the specific plasmid. These early vectors
were often of low copy number, meaning that they replicate to yield only one or two copies in each cell.
pUC18, the vector shown in Fig. 8.6, is a derivative of pBR322. This is a “high copy number” plasmid
(> 500 copies per bacterial cell).
Plasmid vectors are modified to contain a specific antibiotic resistance gene and a multiple cloning site
(also called the polylinker region) which has a number of unique target sites for restriction endonucleases.
Cutting the circular plasmid vector with one of these enzymes results in a single cut, creating a linear plasmid.
A foreign DNA molecule, referred to as the “insert,” cut with the same enzyme, can then be joined to the
vector in a ligation reaction (Fig. 8.6). Ligations of the insert to vector are not 100% productive, because
Recombinant DNA technology and molecular cloning 193
Construction of a recombinant DNA molecule
Plasmid vector
Ampicillin
resistance
gene
Multiple
cloning site
lacz
gene
pUC18
DNA is cut
with EcoRI at
DNA to be inserted
Ligation reaction
TransformationCompentent
bacteria
Transfer of ligation reaction
products to host bacteria
Multiplication of
plasmid DNA molecules
Transformed and
untransformed bacteria
Bacterium carrying
nonrecombinant DNA
molecule Bacterium carrying
recombinant DNA
molecule
Bacterium that did not
take up plasmid DNA
Untransformed
Transformed
Ampicillin
resistance
gene
Recombinant
DNA
DNA ligase
Annealing allows recombinant
DNA molecules to form by
complementary base pairing.
The two strands are not
covalently bonded as
indicated by circled gaps.
DNA ligase seals the gaps,
covalently bonding the two strands.
Nonrecombinant
pUC18
Recombinant
pUC18
EcoRI
EcoRI
EcoRI
Foreign DNAlacZ
gene
E-coli
genome
Resulting DNAs
have sticky
(complementary)
ends
2
3
G A
A
T
TC
G
AA
T T
C
G
C
A A
A
A
T T T
T
C
G
A
A
T
T
C
C
T T A
A
G
G
G A A CT T
C T T GA A
GAAT
TC G
AATTC
CTTA
AG CT
TAAG
1
Foreign DNA insert
Figure 8.6 Molecular cloning using a plasmid vector. Molecular cloning using a plasmid vector involves five
major steps. (1) Construction of a recombinant DNA molecule. In this example, vector DNA (the plasmid pUC18)
and the foreign DNA insert are cleaved with EcoRI and mixed together in a ligation reaction containing DNA ligase.
pUC18 carries the ampicillin resistance gene and has a large number of restriction sites comprising a multiple cloning
site within a selectable marker gene. (2) Transfer of ligation reaction products to host bacteria. Competent E. coli are
transformed with ligation reaction products. Any DNA that remains linear will not be taken up by the host bacteria.
(3) Multiplication of plasmid DNA molecules. Within each transformed host bacterium, there is autonomous
multiplication of plasmid DNA. Each bacterium may contain as many as 500 copies of pUC18. Some bacteria in the
mixture will be untransformed (not carrying either recombinant or nonrecombinant plasmid DNA).
FMBC08 9/29/06 11:09 AM Page 193
Division of host
cells and selection
of recombinant
clones
Plate transformed and
untransformed bacteria
on selective medium
Numerous cell divisions
resulting in clones
(bacterial colonies)
Nonrecombinant clone: transformed bacterial
cells are resistant to ampicillin and produce blue color
Recombinant clone:
transformed bacterial cells
are resistant to ampicillin but
do not produce blue color
Untransformed bacterial
cells are sensitive to
ampicillin and do not grow
Agar containing
ampicillin and
x-gal
Bacterial colony
(1)
(2)
(4) (8) (16)
(32)
(64)
(106
)
Amplification and
purification of
recombinant plasmid DNA
Pick a recombinant colony
Inoculate liquid growth medium
5
Grow overnight
Harvest bacteria
Purify plasmid DNA
4
Figure 8.6 (cont’d) (4) Division of host cells and selection of recombinant clones by blue-white screening. Bacteria
are plated on a selective agar medium containing the antibiotic ampicillin and X-gal (see Fig. 8.7). If foreign DNA
is inserted into the multiple cloning site, then the lacZ′ coding region is disrupted and the N-terminal portion of
β-galactosidase is not produced. Since there is no functional β-galactosidase in the bacteria, the substrate X-gal remains
colorless, and the bacterial colony containing recombinant plasmid DNA appears white, thus allowing the direct
identification of colonies carrying cloned DNA inserts. If there is no insertion of foreign DNA in the multiple cloning
site, then the lacZ′ gene is intact and enzymatically active β-galactosidase is produced. The bacterial colonies containing
nonrecombinant plasmid DNA thus appear blue. (Photograph courtesy of Vinny Roggero and the Spring 2006
Molecular Genetics Lab, College of William and Mary.) (5) Amplification and purification of recombinant plasmid
DNA. A recombinant colony is used to inoculate liquid growth medium. After growing the bacteria overnight, the
culture is harvested, bacterial cells are lysed, and the plasmid DNA is purified away from other cellular components.
FMBC08 9/29/06 11:09 AM Page 194
the two ends of a plasmid vector can be readily ligated together, which is called self-ligation. The degree of
self-ligation can be reduced by treatment of the vector with the enzyme phosphatase, which removes the
terminal 5′-phosphate. When the 5′-phosphate is removed from the plasmid it cannot be recircularized by
ligase, since there is nothing with which to make a phosphodiester bond. But, if the vector is joined with
a foreign insert, the 5′-phosphate is provided by the foreign DNA. Another strategy involves using two
different restriction endonuclease cutting sites with noncomplementary sticky ends. This inhibits self-ligation
and promotes annealing of the foreign DNA in the desired orientation within the vector.
Transformation: transfer of recombinant plasmid DNA to a bacterial host
The ligation reaction mixture of recombinant and nonrecombinant DNA described in the preceding section
is introduced into bacterial cells in a process called transformation (Fig. 8.6). The traditional method is to
incubate the cells in a concentrated calcium salt solution to make their membranes leaky. The permeable
“competent” cells are then mixed with DNA to allow entry of the DNA into the bacterial cell. Alternatively,
a process called electroporation can be used that drives DNA into cells by a strong electric current.
Since bacterial species use a restriction-modification system to degrade foreign DNA lacking the
appropriate methylation pattern, including plasmids, the question arises: why don’t the transformed bacteria
degrade the foreign DNA? The answer is that molecular biologists have cleverly circumvented this defense
system by using mutant strains of bacteria, deficient for both restriction and modification, such as the
common lab strain E. coli DH5α.
Successfully transformed bacteria will carry either recombinant or nonrecombinant plasmid DNA.
Multiplication of the plasmid DNA occurs within each transformed bacterium. A single bacterial cell placed
on a solid surface (agar plate) containing nutrients can multiply to form a visible colony made of millions
of identical cells (Fig. 8.6). As the host cell divides, the plasmid vectors are passed on to progeny, where
they continue to replicate. Numerous cell divisions of a single transfomed bacteria result in a clone of cells
(visible as a bacterial colony) from a single parental cell. This step is where “cloning” got its name. The
cloned DNA can then be isolated from the clone of bacterial cells.
Recombinant selection
What needs to be included in the medium for plating cells so that nontransformed bacterial cells are not able
to grow at all? The answer depends on the particular vector, but in the case of pUC18, the vector carries
a selectable marker gene for resistance to the antibiotic ampicillin. Ampicillin, a derivative of penicillin,
blocks synthesis of the peptidoglycan layer that lies between the inner and outer cell membranes of E. coli
(Table 8.3). Ampicillin does not affect existing cells with intact cell envelopes but kills dividing cells as they
synthesize new peptidoglycan. The ampicillin resistance genes carried by the recombinant plasmids produce
an enzyme, β-lactamase, that cleaves a specific bond in the four-membered ring (β-lactam ring) in the
ampicillin molecule that is essential to its antibiotic action. If the plasmid vector is introduced into a plasmidfree
antibiotic-sensitive bacterial cell, the cell becomes resistant to ampicillin. Nontransformed cells contain
no pUC18 DNA, therefore they will not be antibiotic-resistant, and their growth will be inhibited on agar
containing ampicillin. Transformed bacterial cells may contain either nonrecombinant pUC18 DNA (selfligated
vector only) or recombinant pUC18 DNA (vector containing foreign DNA insert). Both types of
transformed bacterial cells will be ampicillin-resistant.
Blue-white screening
To distinguish nonrecombinant from recombinant transformants, blue-white screening or “lac selection”
(also called α-complementation) can be used with this particular vector (Figs 8.6, 8.7). Bacterial colonies
are grown on selective medium containing ampicillin and a colorless chromogenic compound called X-gal,
for short (5-bromo-4-chloro-3-indolyl-β-d-galactoside). pUC18 carries a portion of the lacZ gene (called
Recombinant DNA technology and molecular cloning 195Recombinant DNA technology and molecular cloning
FMBC08 9/29/06 11:09 AM Page 195
lacZ′) that encodes the first 146 amino acids for the enzyme β-galactosidase (see Section 10.5). The multiple
cloning site resides in the coding region. If the lacZ′ region is not interrupted by inserted DNA, the aminoterminal
portion of β-galactosidase is synthesized. Importantly, an E. coli deletion mutant strain is used
(e.g. DH5α) that harbors a mutant sequence of lacZ that encodes only the carboxyl end of β-galactosidase
(lacZ′ ∆M15). Both the plasmid and host lacZ fragments encode nonfunctional proteins. However, by
α-complementation the two partial proteins can associate and form a functional enzyme. When present, the
enzyme β-galactosidase catalyzes hydrolysis of X-gal, converting the colorless substrate into a blue-colored
product (see Figs 8.6, 8.7).
Amplification and purification of recombinant plasmid DNA
Further screening of positive (white) colonies can be done by restriction endonuclease digest to confirm the
presence and orientation of the insert (see Section 8.9). When a positive colony containing recombinant
plasmid DNA is transferred aseptically to liquid growth medium, the cells will continue to multiply
exponentially. Within a day or two, a culture containing trillions of identical cells can be harvested.
The final step in molecular cloning is the recovery of the cloned DNA. Plasmid DNA can be purified
from crude cell lysates by chromatography (see Tool box 8.1) using silica gel or anion exchange resins that
preferentially bind nucleic acids under appropriate conditions and allow for the removal of proteins and
polysaccharides. The purified plasmid DNA can then be eluted and recovered by ethanol precipitation in
the presence of monovalent cations. Ethanol precipitation of plasmid DNA from aqueous solutions yields a
clear pellet that can be easily dissolved in an appropriate buffered solution.
Bacteriophage lambda (l) as a vector
Bacteriophage lambda (λ) has been widely used in recombinant DNA since engineering of the first viral
cloning vector in 1974. Phage λ vectors are particularly useful for preparing genomic libraries, because they
can hold a larger piece of DNA than a plasmid vector (see Section 8.5). Today many variations of λ vectors
exist. Insertion vectors have unique restriction endonuclease sites that allow the cloning of small DNA
fragments in addition to the phage λ genome. These are often used for preparing cDNA expression libraries.
Replacement vectors have paired cloning sites on either side of a central gene cluster. This central cluster
contains genes for lysogeny and recombination, which are not essential for the lytic life cycle (see Fig. 8.1).
The central gene cluster can be removed and foreign DNA inserted between the “arms.” All phage vectors
used as cloning vectors have been disarmed for safety and can only function in special laboratory conditions.
A typical strategy for the use of a phage λ replacement vector is depicted in Fig. 8.8. The recombinant
viral particle infects bacterial host cells, in a process called “transduction.” The host cells lyse after phage
Chapter 8196
Table 8.3 Some commonly used antibiotics and antibiotic resistance genes.
Antibiotic
Ampicillin
Tetracycline
Kanamycin
Mode of action
Inhibits bacterial cell wall synthesis by disrupting
peptidoglycan cross-linking
Inhibits binding of aminoacyl tRNA to the 30S
ribosomal subunit
Inactivates translation by interfering with
ribosome function
Resistance gene
β-Lactamase (ampr
) gene product is secreted and
hydrolyzes ampicillin
tetr
gene product is membrane bound and prevents
tetracycline accumulation by an efflux mechanism
Neomycin or aminoglycoside phosphotransferase
(neor
) gene product inactivates kanamycin by
phosphorylation
FMBC08 9/29/06 11:09 AM Page 196
reproduction, releasing progeny virus particles. The viral particles appear as a clear spot of lysed bacteria
or “plaque” on an agar plate containing a lawn of bacteria. Each plaque represents progeny of a single
recombinant phage and contains millions of recombinant phage particles. Most contemporary vectors carry
a lacZ′ gene allowing blue-white selection.
Artificial chromosome vectors
Bacterial artificial chromosomes (BACs) and yeast artificial chromosomes (YACs) are important tools for
mapping and analysis of complex eukaryotic genomes. Much of the work on the Human Genome Project
and other genome sequencing projects depends on the use of BACs and YACs, because they can hold
greater than 300 kb of foreign DNA. BACs are constructed using the fertility factor plasmid (F factor) of
E. coli as a starting point. The plasmid is naturally 100 kb in size and occurs at a very low copy number in
Recombinant DNA technology and molecular cloning 197
Plasmid DNA
lac Z 5′
sequences
lac Z 3′
sequences
β-galactosidase
C-terminal
polypeptide
β-galactosidase
N-terminal
polypeptide
E. coli host DNA
X–gal
X-gal cleavage
Accumulation
of the X-gal
product results
in blue colonies
No X-gal cleavage
Bacterial colonies
remain white
Figure 8.7 ββ-Galactosidase activity can be used as an indicator of the presence of a foreign DNA
insert. Plasmids that express the N-terminal fragment of β-galactosidase (lacZ 5′) can be used in E. coli strains
expressing the C-terminal fragment of the enzyme (lacZ 3′ sequences). The N-terminal and C-terminal fragments join
and four subunits come together to form a functional tetrameric-enzyme. β-Galactosidase activity can be measured in
live cells using a colorless chromogenic substrate called 5-bromo-4-chloro-3-indolyl-β-d-galactoside (X-gal). Cleavage
of X-gal produces a blue-colored product that can be visualized as a blue colony on agar plates. If a foreign insert has
disrupted the lacZ 5′ coding sequence, then only the C-terminal polypeptide will be produced in the bacterial cell.
Thus, X-gal is not cleaved and bacterial colonies remain white.
FMBC08 9/29/06 11:09 AM Page 197
Layer
sample
on
column
Layer
sample
on
column
Large
protein
Small
protein
Add buffer
to wash
proteins
through
column
Collect
fractions
Load in
pH7 buffer
Protein
recognized
by antibody
Protein not
recognized
by antibody
Wash
Elute
with
pH 3
buffer
Polymer gel bead
Antibody 321
34 2 1
3 2 1
Negatively charged
protein
Positively charged
protein
Positively charged gel bead
Collect
positively
charged
proteins
Elute negatively
charged protein
with salt solution
(NaCl)
Na+
Cl–
(A) (C)
(B)
Gel filtration chromatography
Ion-exchange chromatography
Antibody-affinity chromatography
Gel bead
Figure 1 Liquid chromatography techniques. (A) Gel filtration chromatography is used to separate macromolecules that differ
in size. For example, a protein mixture is layered on the top of a column packed with porous beads (agarose or polyacrylamide).
Larger proteins flow around the beads. Because smaller proteins penetrate into the beads, they travel through the beads more slowly
than larger proteins. Different proteins can be collected in separate liquid fractions. (B) Ion-exchange chromatography is used to
separate macromolecules (such as proteins or nucleic acids) that differ in net charge. For example, proteins are added to a column
packed with beads that are coated by amino (NH3+
) or carboxyl (COO−
) groups that carry either a positive charge (shown here) or
a negative charge at neutral pH. Acidic proteins with the opposite charge (net negative charge) bind to the positively charged beads,
while basic or neutral proteins with the same net charge flow through the column. Bound proteins, in this case negatively charged,
are eluted by passing a salt gradient through the column. As the negatively charged salt ions bind to the beads, the protein is
released. (C) Affinity chromatography relies on the ability of a protein or nucleic acid to bind specifically to another molecule.
Columns are packed with beads to which ligand molecules are covalently attached that bind the protein or nucleic acid of interest.
Ligands can be antibodies, enzyme substrates, or other small molecules that bind a specific macromolecule. For example, in
antibody-affinity chromatography, the column contains a specific antibody covalently attached to beads. Only proteins with a high
affinity for the antibody are retained by the column, regardless of mass or charge, while other proteins flow through. The bound
protein can be eluted in an acidic solution, by adding an excess of ligand, or by changing the salt concentration.
T O O L B O X 8 . 1 Liquid chromatography
Chapter 8198
FMBC08 9/29/06 11:09 AM Page 198
the host. The engineered BAC vector is 7.4 kb (including a replication origin, cloning sites, and selectable
markers) and thus can accommodate a large insert of foreign DNA. The characteristics of YAC vectors are
discussed below.
Immediately after the construction of the first YAC in 1983, efforts were undertaken to develop a
mammalian artificial chromosome (MAC). From there on, it took 14 years until the first prototype MAC
was described in 1997. Like YACs, MACs rely on the presence of centromeric sequences, sequences that can
initiate DNA replication, and telomeric sequences. Their development is considered an important advance
in animal biotechnology and human gene therapy for two main reasons. First, they involve autonomous
replication and segregation in mammalian cells, as opposed to random integration into chromosomes (as for
other vectors). Second, they can be modified for their use as expression systems of large genes, including
not only the coding region but all control elements. A major drawback limiting application at this time,
however, is that they are difficult to handle due to their large size and can be recovered only in small
quantities. Two principal procedures exist for the generation of MACs. In one method, telomere-directed
fragmentation of natural chromosomes is used. For example, a human artificial chromosome (HAC) has
been derived from chromosome 21 using this method. Another method involves de novo assembly of cloned
centromeric, telomeric, and replication origins in vitro.
Yeast artificial chromosome (YAC) vectors
Yeast, although a eukaryote, is a small single cell that can be manipulated and grown in the lab much like
bacteria. YAC vectors are designed to act like chromosomes. Their design would not have been possible
without a detailed knowledge of the requirements for chromosome stability and replication, and genetic
analysis of yeast mutants and biochemical pathways. YAC vectors include an origin of replication
(autonomously replicating sequence, ARS) (see Section 6.6), a centromere to ensure segregation into
daughter cells, telomeres to seal the ends of the chromosomes and confer stability, and growth selectable
markers in each arm (Fig. 8.9). These markers allow for selection of molecules in which the arms are joined
and which contain a foreign insert. For example, the yeast genes URA3 and TRP1 are often used as
markers. Positive selection is carried out by auxotrophic complementation of a ura3-trp1 mutant yeast strain,
Recombinant DNA technology and molecular cloning 199
Liquid chromatography T O O L B O X 8 . 1
An important tool in molecular biology is chromatography.
The technique of chromatography was first developed in
the early 1900s by a botanist named Mikhail Semenovich
Tswett. Tswett passed a leaf extract through a vertical tube
packed with some absorbent resin. Through this procedure
he was able to separate the main green and orange
pigments from the leaves. The chlorophylls, xanthophylls,
and carotenes appeared as distinct colored bands in the
column. Based on these observations, Tswett name the
technique “chromatography” (from the Greek word khroma
for “color,” and graphein, “to write”).
Today, there are many variants of chromatography, but
they all rely on the principles first observed by Tswett,
that molecules dissolved in a solution will interact (bind
and dissociate) with a solid surface. When the solution is
allowed to flow across the surface, molecules that interact
weakly with the solid surface will spend less time bound to
the surface and will move more rapidly than molecules that
interact strongly with the surface. Liquid chromatography
is commonly used to separate mixtures of nucleic acids
and proteins by passing them through a column packed
tightly with spherical beads. The nature of these beads
determines whether the separation of the nucleic acids or
proteins depends on differences in mass (gel filtration
chromatography), charge (ion-exchange chromatography),
or binding affinity (affinity chromatography) (Fig. 1).
FMBC08 9/29/06 11:09 AM Page 199
which requires supplementation with uracil and tryptophan to grow. URA3 encodes an enzyme that is
required for the biosynthesis of the nitrogenous base uracil (orotidine-5′-phosphate decarboxylase). TRP1
encodes an enzyme that is required for biosynthesis of the amino acid tryptophan (phosphoribosylanthranilate
isomerase). YAC vectors are maintained as a circle prior to inserting foreign DNA. After
cutting with restriction endonucleases BamHI and EcoRI, the left arm and right arm become linear, with
the end sequences forming the telomeres. Foreign DNA is cleaved with EcoRI and the YAC arms and
foreign DNA are ligated and then transferred into yeast host cells. The yeast host cells are maintained as
spheroplasts (lacking yeast cell wall). Yeast cells are grown on selective nutrient regeneration plates that lack
uracil and tryptophan, to select for molecules in which the arms are joined bringing together the URA3
and TRP1 genes.
Red-white selection In the example shown in Fig. 8.9, recombinant YACs are screened for by a “red-white
selection” process. Within the multiple cloning site of the YAC in this example, there is another marker,
Chapter 8200
Phage λ
Purify λ DNA
λ arms
Central gene
cluster
Central gene cluster removed
by restriction endonuclease
digestion
Ligation
In vitro packaging in
phage coats
Replication and lysis
Phage
plaque
Recombinant phage λ
E.coli
Infect bacterial host cell
Cleavage by same
restriction endonuclease
Foreign DNA
Figure 8.8 Use of bacteriophage
lambda (λλ) as a cloning vector. DNA is
extracted from phage λ and the central gene
cluster is removed by restriction endonuclease
digestion. The foreign DNA to be cloned is
cut with the same enzyme and ligated to the
left and right “arms” of the phage λ DNA.
The recombinant DNA is then mixed with
phage proteins in vitro. The DNA is packaged
into the phage head and tail fibers are attached
via a self-assembly pathway. The recombinant
viral particle is then able to infect bacterial
cells on an agar plate. The phage replicates its
genome, including the foreign DNA insert.
Recombinant phage λ DNA directs the cell to
make phage particles. The bacteria become
filled with new phage particles, break open
(lyse), and release millions of recombinant
phages. The holes in the lawn of host bacteria,
called plaques, are regions where phages have
killed the bacteria. Each plaque represents
progeny of a single recombinant phage.
FMBC08 9/29/06 11:09 AM Page 200
SUP4. SUP4 encodes a tRNA that suppresses the Ade2-1 UAA mutation. ADE1 and ADE2 encode
enzymes involved in the synthesis of adenine (phosphoribosylamino-imidazole-succinocarbozamide
synthetase and phosphoribosylamino-imidazole carboxylase, respectively). In the absence of these critical
enzymes, Ade2-1 mutant cells produce a red pigment, derived from the polymerization of the intermediate
phosphoribosylamino-imidazole. But Ade2-1 mutant cells expressing SUP4 are white (the color of wild-type
yeast strains), because the Ade2-1 mutation is suppressed. When foreign DNA is inserted in the multiple
cloning site, SUP4 expression is interrupted. In the absence of SUP4 expression the red pigment reappears
because the Ade2-1 mutation is no longer suppressed. In contrast, the nonrecombinant YAC vectors retain
the active SUP4 suppressor. Thus, red colonies contain recombinant YAC vector DNA, whereas the white
colonies contain nonrecombinant YAC vector DNA.
Recombinant DNA technology and molecular cloning 201
YAC Cloning vector
BamHI
Digest with BamH1
and EcoR1
Digest with
EcoR1
Foreign DNA
EcoR1
EcoR1
T
RP 1 TEL
TEL
ARS
CEN
SUP4 URA3
EcoR1
TEL
TEL
TEL
TEL
Ligate
Transfer to yeast host cells
and plate on selective medium
The red yeast colonies
contain recombinant YAC
The white yeast colonies
contain nonrecombinant YAC
TRP1
TRP1
ARS
ARS
CEN
CEN
URA3
URA3
Figure 8.9 Use of yeast artificial chromosome (YAC) cloning vectors. YAC cloning vectors contain
functional elements for chromosome maintenance in the yeast Saccharomyces cerevisiae. The YAC shown in this example
contains an autonomously replicating sequence (ARS) to function as an origin of replication, centromere elements
(CEN) for chromosome segregation during cell division, telomeric sequences (TEL) for chromosome stability, and
growth selectable markers (URA3 and TRP1) to select positively for chromosome maintenance. Foreign DNA is
partially digested with EcoRI and the material is then ligated to YAC vector DNA that has been digested with BamHI
to liberate telomeric ends and with EcoRI to create the insert cloning site. Yeast transformants containing recombinant
YAC DNA can be identified by red-white color selection using a yeast strain that is Trp1−
and Ura3−
and contains the
Ade2-1 mutation, which is suppressed by the SUP4 gene product. Inactivation of SUP4 by DNA insertion into the
EcoRI site results in the formation of a red colony.
FMBC08 9/29/06 11:09 AM Page 201
Sources of DNA for cloning
The cloning that has been described so far will work for any random piece of DNA. But since the goal of
many cloning experiments is to obtain a sequence of DNA that directs the production of a specific protein,
we need to first consider where to obtain such DNA. Sources of DNA for cloning into vectors may be
DNA fragments representing a specific gene or portion of a gene, or may be sequences of the entire
genome of an organism, depending on the end goal of the researcher. Typical “inserts” include genomic
DNA, cDNA (Tool box 8.2), polymerase chain reaction (PCR) products (Tool box 8.3), and chemically
synthesized oligonucleotides. When previously isolated clones are transferred into a different vector for other
applications, this is called “subcloning.”
8.5 Constructing DNA libraries
Vectors are used to compile a library of DNA fragments that have been isolated from the genomes of a
variety of organisms. This collection of fragments can then be used to isolate specific genes and other
DNA sequences of interest. DNA fragments are generated by cutting the DNA with a specific restriction
endonuclease. These fragments are ligated into vector molecules, and the collection of recombinant
molecules is transferred into host cells, one molecule in each cell. The total number of all DNA molecules
makes up the library. This library is searched, that is screened, with a molecular probe that specifically
identifies the target DNA. Once prepared the library can be perpetuated indefinitely in the host cells and is
readily retrieved whenever a new probe is available to seek out a particular fragment. Two main types of
libraries can be used to isolate specific DNAs: genomic and cDNA libraries.
Genomic library
A genomic library contains DNA fragments that represent the entire genome of an organism. The first step
in creating a genomic library is to break the DNA into manageable size pieces (e.g. 15–20 kb for phage λ
vectors), usually by partial restriction endonuclease digest. Under limiting conditions, any particular
restriction site is cleaved only occasionally, so not all sites are cleaved in any particular DNA molecule. This
generates a continuum of overlapping fragments. The second step is to purify fragments of optimal size by
gel electrophoresis or centrifugation techniques. The final step is to insert the DNA fragments into a suitable
vector. In humans, the genome size is approximately 3 × 109
bp. With an average insert size of 20 kb, the
number of random fragments to ensure with high probability (95–99%) that every sequence is represented is
approximately 106
clones for humans. The maths actually works out to 1.5 × 105
(i.e. (3 × 109
bp)/(2 × 104
bp)) but more clones are needed in practice, since insertion is random. Bacteriophage λ or cosmid vectors
are typically used for genomic libraries. Since a larger insert size can be accommodated by these vectors
compared with plasmids, there is a greater chance of cloning a gene sequence with both the coding
sequence and the regulatory elements in a single clone.
cDNA library
The principle behind cDNA cloning is that an mRNA population isolated from a specific tissue, cell type,
or developmental stage (e.g. embryo mRNA) should contain mRNAs specific for any protein expressed in
that cell type or during that stage, along with “housekeeping” mRNAs that encode essential proteins such as
the ribosomal proteins, and other mRNAs common to many cell types or stages of development. Thus, if
mRNA can be isolated, a small subset of all the genes in a genome can be studied. mRNA cannot be cloned
directly, but a cDNA copy of the mRNA can be cloned (see Tool box 8.2). Because a cDNA library is
derived from mRNA, the library contains the coding region of expressed genes only, with no introns or
regulatory regions. This latter point becomes important for applications of recombinant DNA technology to
the production of transgenic animals and for human gene therapy (see Chapters 15 and 17).
Chapter 8202
FMBC08 9/29/06 11:09 AM Page 202
8.6 Probes
Searching for a specific cloned DNA sequence in a library is called library screening. One of the key
elements required to identify a gene during library screening is the probe. The term probe generally refers to
a nucleic acid (usually DNA) that has the same or a similar sequence to that of a specific gene or DNA
sequence of interest, such that the denatured probe and target DNA can hybridize when they are renatured
together. The probe not only must have the same or a similar sequence to the gene of interest but the
researcher must also be able to detect its hybridization. Thus, the probe is labeled; that is, it is chemically
modified in some way which allows it, and hence anything it hybridizes to, to be detected. Specific enzymes
are used that can add labeled nucleotides in a variety of ways. Typically the probe is made radioactive and
added to a solution (Tool boxes 8.4, 8.5). Filters containing immobilized clones are then bathed in the
solution. The principle behind this step is that the probe will bind to any clone containing sequences similar
to those found on the probe. This binding step is called hybridization. In some cases a library is screened
with a protein. For example, when a cDNA library is being screened an antibody can be used to identify the
protein that is being expressed by the insert of the clone. In this case, the library is said to be “incubated”
with the antibody probe, not hybridized. The use of antibodies in molecular biology research is discussed in
more detail in Chapter 9 (Tool box 9.4).
Hybridization can occur between DNA and DNA, DNA and RNA, and RNA and RNA. There are
three major types of probe: (i) oligonucleotide probes, which are synthesized chemically and end-labeled;
(ii) DNA probes, which are cloned DNAs and may either be end-labeled or internally labeled during in vitro
replication; and (iii) RNA probes (riboprobes), which are internally labeled during in vitro transcription from
cloned DNA templates. RNA probes and oligonucleotide probes are generally single-stranded. DNA may be
labeled as a double-stranded or single-stranded molecule, but it is only useful as a probe when singlestranded
and therefore must be denatured before use. Oligonucleotide, cloned DNA, and RNA probes are
of two major types: heterologous and homologous.
Heterologous probes
A heterologous probe is a probe that is similar to, but not exactly the same as, the nucleic acid sequence of
interest. If the gene being sought is known to have a similar nucleotide sequence to a second gene that has
already been cloned, then it is possible to use this known sequence as a probe. For example, a mouse probe
could be used to search a human genomic library.
Homologous probes
A homologous probe is a probe that is exactly complementary to the nucleic acid sequence of interest.
Homologous probes can be designed and constructed in a number of different ways. Examples include
degenerate probes, expressed sequence tag (EST) based probes, and cDNA probes that are used to locate a
genomic clone.
Use of degenerate probes: historical perspective
Before the advent of genome sequence databases, the classic method for designing a probe and screening
a library relied on having a partial amino acid sequence of a purified protein. To generate an 18–21 nt
oligonucleotide probe, all that was required was to know the sequence of about six to seven amino
acids. Long before the advent of DNA sequencing, amino acid sequencing was a routine procedure for
biochemists. In fact, in 1953, the same year that Watson and Crick proposed the double helix structure of
DNA, Frederick Sanger – also at Cambridge University – worked out the sequence of amino acids in the
polypeptide chains of the hormone insulin. This was a most important achievement, since it had long been
thought that protein sequencing would be a nearly impossible task. Traditionally, protein sequencing was
performed using the Edman degradation method (Fig. 8.10). Today, protein sequencing is more often
Recombinant DNA technology and molecular cloning 203
FMBC08 9/29/06 11:09 AM Page 203
Most eukaryotic mRNAs are polyadenylated at the 3′
end to form a poly(A) tail (see Section 13.5). This has an
important practical consequence that has been exploited
by molecular biologists. The poly(A) region can be used
to selectively isolate mRNA from total RNA by affinity
chromatography (Fig. 1A). The purified mRNA can then be
used as a template for synthesis of a complementary DNA
(cDNA) (Fig. 1B,C).
Purification of mRNA
Total RNA is extracted from a specific cell type that
expresses a specific set of genes. Of this total cellular RNA,
80–90% is rRNA, tRNA, and histone mRNA, not all of which
have a poly(A) tail. These RNAs can be separated from the
poly(A) mRNA by passing the total RNA through an affinity
column of oligo(dT) or oligo(U) bound to resin beads. Under
conditions of relatively high salt the poly(A) RNA is retained
T O O L B O X 8 . 2 Complementary DNA (cDNA) synthesis
A A AAA
Poly(A) tail
Poly(dT) primer
Double-stranded duplex
A A AAA
A A AAA
A A AAA
A A AAA
A A AAA
T T T T T
T T T T T
Oligo (dT) cellulose
mRNA
Purified
mRNA is
eluted
rRNA and
tRNA are
washed off column
tRNA
rRNA
Extract
total RNA
mRNA
Wash in
high salt
Specific
cell type
mRNA
Add primer (poly (dT))
Add reverse transcriptase, dNTPs
T T T T T
mRNA : cDNA hybrid
Digest RNA
Single-stranded cDNA
3′
5′3′
5′ T T T T T
3′
5′
T T T T T
3′
3′
Add DNA polymerase 1 (Klenow fragment)
+ dNTPs
Add S1nuclease
to cleave hairpin
Double-stranded cDNA
First strand
First strand
Second strand
(B)
(C)
(A)
T
A
T A
AT
T A
T
T
T
T
T
T
T
T
A
AAAA
T
A T
A
A
T
T
AAAA
AAAA
AAAA
Elution in
low salt
T T T T T
FMBC08 9/29/06 11:09 AM Page 204
Complementary DNA (cDNA) synthesis T O O L B O X 8 . 2
by formation of hydrogen bonds with the complementary
bases, and the RNA lacking a poly(A) tail flows through.
The salt conditions for hybridization are similar to the ion
concentration in cells (e.g. 0.3–0.6 M NaCl). The poly(A)
mRNA is then eluted from the column in low salt elution
buffer (e.g. 0.01 M NaCl), which promotes denaturation of
the hybrid (see Section 2.6).
First strand synthesis of cDNA
A number of strategies can be used to synthesize cDNA
from purified mRNA. One strategy is as follows. In brief,
cDNA is synthesized by the action of reverse transcriptase
and DNA polymerase (Fig. 1B). The reverse transcriptase
catalyzes the synthesis of a single-stranded DNA from the
mRNA template. Like a regular DNA polymerase, reverse
transcriptase also needs a primer to get started. A poly(dT)
primer is added to provide a free 3′-OH end that can be used
for extension by reverse transcriptase in the presence of
deoxynucleoside triphosphates (dNTPs). Usually a viral
reverse transcriptase is employed such as one from avian
myeloblastosis virus (AMV). The reverse transcriptase adds
dNTPs from 5′ to 3′ by complementary base pairing. This is
called first strand synthesis. The mRNA is then degraded
with a ribonuclease or an alkaline solution.
Second strand synthesis of cDNA
For most applications, including cloning of cDNAs, doublestranded
DNA is required. The second DNA strand is
generated by the Klenow fragment of DNA polymerase I
from E. coli (Fig. 1C). The 5′ → 3′ exonuclease activity of
DNA polymerase I from E. coli (see Focus box 6.1) makes it
unsuitable for many applications. However, this enzymatic
activity can be readily removed from the holoenzyme by
exposure to a protease. The large or Klenow fragment of
DNA polymerase I generated by proteolysis has 5′ → 3′
polymerase and 3′ → 5′ exonuclease (proofreading) activity,
and is widely used in molecular biology. Commercially
available Klenow fragments are usually produced by
expression in bacteria from a truncated form of the DNA
polymerase I gene.
There is a tendency for the reverse transcriptase enzyme
used in first strand synthesis to loop back on itself and
start to make another complementary strand. This hairpin
forms a natural primer for DNA polymerase and a second
strand of DNA is generated. S1 nuclease (from Aspergillus
oryzae) is then added to cleave the single-stranded DNA
hairpin. Double-strand DNA linkers with ends that are
complementary to an appropriate cloning vector are added
to the double-strand DNA molecule before ligation into the
cloning vector. The end result is a double-stranded cDNA in
which the second strand corresponds to the sequence of the
mRNA, thus representing the coding strand of the gene.
The sequences that appear in the literature are the 5′ → 3′
sequences of the second strand cDNA (Fig. 1). Sequences
corresponding to introns and to promoters and all regions
upstream of the transcriptional start site are not
represented in cDNAs. The library created from all the
cDNAs derived from the mRNAs in the specific cell type
forms the cDNA library of cDNA clones.
Figure 1 (opposite) Traditional cDNA synthesis. (A) Purification of mRNA. Total RNA is extracted from a specific cell
type and loaded on an oligo(dT) affinity chromatography column under conditions (high salt buffer) that promote hybridization
between the 3′ poly(A) tails of the mRNA and the oligo(dT) covalently coupled to the column matrix. After hybridization, the
rRNAs and tRNAs are washed out of the column. The mRNA is eluted with a low salt buffer. The resulting purified mRNA
contains many different mRNAs encoding different proteins. (B) First strand synthesis. Synthesis of the first strand of cDNA is
carried out using the enzyme reverse transcriptase and a poly(dT) primer in the presence of dNTPs. An mRNA–cDNA hybrid is
produced and the mRNA is then digested with an alkaline solution or the enzyme ribonuclease. (C) Second strand synthesis.
Synthesis of double-stranded cDNA uses a self-priming method. The Klenow fragment of DNA polymerase I catalyzes synthesis of
the second strand, using the natural hairpin of the first strand as a primer. The hairpin is cleaved with a single-strand DNA nuclease
(S1 nuclease). The end result is a collection of double-strand cDNAs that correspond to the sequences of the many different
mRNAs extracted from the cell.
Recombinant DNA technology and molecular cloning 205
FMBC08 9/29/06 11:09 AM Page 205
The polymerase chain reaction (PCR) is the one of the most
powerful techniques that has been developed recently in the
area of recombinant DNA research. PCR has had a major
impact on many areas of molecular cloning and genetics.
With this technique, a target sequence of DNA can be
amplified a billion-fold in several hours. Amplification of
particular segments of DNA by PCR is distinct from the
amplification of DNA during cloning and propagation within
a host cell. The procedure is carried out entirely in vitro. In
addition to its use in many molecular cloning strategies,
PCR is also used in the analysis of gene expression (see
Section 9.5), forensic analysis where minute samples of DNA
are isolated from a crime scene (see Section 16.2), and
diagnostic tests for genetic diseases (see Disease box 8.1).
PCR is a DNA polymerase reaction. As with any DNA
polymerase reaction it requires a DNA template and a free
3′-OH to get the polymerase started. The template is
provided by the DNA sample to be amplified and the free
3′-OH groups are provided by site-specific oligonucleotide
primers. The primers are complementary to each of the
ends of the sequence that is to be amplified. Note that
in vivo DNA polymerase would use an RNA primer (see
Section 6.4), but a more stable, more easily synthesized
DNA primer is used in vitro. The three steps of the reaction
are denaturation, annealing of primers, and primer
extension (Fig. 1):
1 Denaturation. In the first step, the target sequence of
DNA is heated to denature the template strands and
render the DNA single-stranded.
2 Annealing. The DNA is then cooled to allow the primers
to anneal, that is, to bind the appropriate complementary
strand. The temperature for this step varies depending on
the size of the primer, the GC content, and its homology to
the target DNA. Primers are generally DNA
oligonucleotides of approximately 20 bases each.
3 Primer extension. In the presence of Mg2+
, DNA
polymerase extends the primers on both strands from
5′ to 3′ by its polymerase activity. Primer extension is
performed at a temperature optimal for the particular
polymerase that is used. Currently, the most popular
enzyme for this step is Taq polymerase, the DNA
polymerase from the thermophilic (heat-loving) bacteria
Thermus aquaticus. This organism lives in hot springs that
can be near boiling and thus requires a thermostable
polymerase.
These three steps are repeated from 28 to 35 times. With
each cycle, more and more fragments are generated with
just the region between the primers amplified. These
accumulate exponentially. The contribution of strands with
extension beyond the target sequence becomes negligible
since these accumulate in a linear manner. After 25 cycles
in an automated thermocycler machine, there is a 225
amplification of the target sequence. PCR products can
be visualized on a gel stained with nucleic acid-specific
fluorescent compounds such as ethidium bromide or SYBR
green. The error rate of Taq is 2 × 10−4
. If an error occurs
early on in the cycles, it could become prominent. Other
polymerases, such as Pfu, have greater fidelity. Pfu DNA
polymerase is from Pyrococcus furiosus. Base misinsertions
that may occur infrequently during polymerization are
rapidly excised by the 3′ → 5′ exonuclease (proofreading)
activity of this enzyme.
When Kary Mullis first developed the PCR method in 1985,
his experiments used E. coli DNA polymerase. Because E.
coli DNA polymerase is heat-sensitive, its activity was
destroyed during the denaturation step at 95°C. Therefore,
a new aliquot of the enzyme had to be added in each cycle.
The purification, and ultimately the cloning, of the DNA
polymerase from T. aquaticus made the reaction much
simpler. In his first experiments, Mullis had to move the
reaction manually between the different temperatures.
Fortunately, this procedure has been automated by the
development of thermal cyclers. These instruments have
the capability of rapidly switching between the different
temperatures that are required for the PCR reaction. Thus
the reactions can be set up and placed in the thermal cycler,
and the researcher can return several hours later (or the
next morning) to obtain the products.
T O O L B O X 8 . 3 Polymerase chain reaction (PCR)
Chapter 8206
FMBC08 9/29/06 11:09 AM Page 206
Polymerase chain reaction (PCR) T O O L B O X 8 . 3
Figure 1 Polymerase chain reaction
(PCR). PCR is an in vitro DNA replication
method. The starting material is a doublestranded
DNA. The target sequence to be
amplified is indicated in green. Large numbers
of two primers (blue) are added, each with a
sequence complementary to that found in one
strand at the end of the region to be amplified.
A thermostable DNA polymerase (e.g. Taq
polymerase) and dNTPs are also added. In the
first cycle, heating to 95°C denatures the
double-stranded DNA and subsequent cooling
to 55–65°C then allows the primers to anneal
to their complementary sequences in the target
DNA. Taq polymerase extends each primer
from 5′ to 3′, generating newly synthesized
strands in both directions, which extend to the
end of the template strands. The extension is
performed at 72°C. In the second cycle, the
original and newly made DNA strands are
denatured at 95°C and primers are annealed to
their complementary sequences at 55–65°C.
Each annealed primer again is extended by Taq
polymerase. In the third cycle, two doublestrand
DNA molecules are generated exactly
equal to the target sequence. These two are
doubled in the fourth cycle and are doubled
again with each successive cycle.
Cycle 2
Cycle 3
Cycle 4 - 25
Denature DNA and repeat
Denature DNA and repeat
Denature template strands
Anneal primers
Primer extension: replication
in both directions
Cycle 1
5′
5′
5′
5′
5′
5′
5'
5′
5′
5′
5′
5′
5′
5′
5′
5′
5′
5′
5′
5′
5′
5′
5′
5′
5′
5′
5′
5′
5′
5′
5′
5′
5′
3′
3′
3′
3′
3′
3′
3′
3′
3′
3′
3′
3′
3′
3′
3′
3′
3′
3′
3′
3′
3′
3′
3′
3′
3′
3′
3′
3′
3′
3′
3′
3′
Recombinant DNA technology and molecular cloning 207
FMBC08 9/29/06 11:09 AM Page 207
The world of cells and macromolecules is invisible to the
unaided eye. Development of the tools of molecular biology
has allowed researchers to make this world visible. Since
World War II, when radioactive materials first became
widely available as byproducts of work in nuclear physics,
they have become indispensible tools for detecting
biological molecules. Hundreds of biological compounds
(e.g. nucleotides, amino acids, and numerous metabolic
intermediates) are commercially available. The presence of
a radioisotope does not change the chemical properties
of a radioactively labeled precursor of a macromolecule.
Enzymes, both in vitro and in vivo, catalyze reactions
involving labeled substrates just as readily as those
involving nonlabeled substrates. Because radioisotopes
emit easily detected particles, the fate of radiolabeled
molecules can be traced in cells and cellular extracts. For
example, labeling nucleic acids is important for tracking
their localization, for defining synthetic processes, and for
labeling of hybridization probes.
Commonly used radioisotopes in molecular biology
Radioisotopes are unstable isotopes of an element. Isotopes
of a given element contain the same number of protons but
a different number of neutrons. During radioactive decay
there is a change in the number of neutrons and protons
from an unstable combination to a more stable combination.
The nuclide has less mass after decay (mass converted to
energy). For the radioisotopes used in molecular biology
research, this energy is emitted as beta (b) particles
(small, electrically charged particles that are identical to
electrons) or gamma (g) rays. For example, the amino
acids methionine and cysteine labeled with sulfur-35
(35
S) are widely used to label cellular proteins (Table 1).
Phosphorus-32 (32
P) labeled nucleotides are routinely used
to label both RNA and DNA in cell-free systems (in vitro).
For metabolic labeling (labeling in vivo), compounds labeled
with hydrogen-3 (3
H, tritium) are more commonly used.
For example, to identify the site of RNA synthesis, cells
can be incubated for a short period with 3
H-uridine and
then subjected to a fractionation procedure to separate the
various organelles or to autoradiography. The radioisotope
iodine-125 (125
I) is often covalently linked to antibodies for
the detection of specific proteins.
Detection techniques
The technique of autoradiography makes use of the fact that
radioactive isotopes expose photographic film. The visible
silver grains on the film can be counted to provide an
estimate of the quantity of radioactive material present.
Quantitative measurements of radioactivity in a labeled
material can also be performed with several different
instruments. A Geiger counter measures ions produced in a
gas by b-particles or g-rays emitted from a radioisotope. In
a scintillation counter, a radiolabeled sample is mixed with
a liquid containing a fluorescent compound that emits a
flash of light when it absorbs the energy of the b-particles
T O O L B O X 8 . 4 Radioactive and nonradioactive labeling methods
Table 1 Some radioisotopes commonly used in molecular biology research.
Radioisotope
Tritium
(hydrogen-3)
Carbon-14
Phosphorus-32
Sulfur-35
Iodine-125
* The half-life is a means of classifying the rate of decay of radioisotopes according to the time it takes them to lose half their strength (intensity).
Symbol
3H
14C
32P
35S
125
I
Half-life*
12.28 years
5730 years
14.29 days
87.4 days
60.14 days
Labeled macromolecule
Nitrogenous bases (e.g. 3
H-uridine,
3
H-thymidine)
3
H-dNTPs, 3
H-NTPs
14
C-chloramphenicol
32
P-NTPs
32
P-dNTPs
Amino acids (35
S-cysteine,
35
S-methionine)
N/A
Application
RNA and DNA labeling in vivo
Probes for in situ hybridization
CAT assays
Hybridization probes
Protein labeling (in vivo and in vitro)
Antibody labeling
Chapter 8208
FMBC08 9/29/06 11:09 AM Page 208
performed using mass spectrometry technology, such as matrix-assisted laser desorption/ionization–time of
flight (MALDI-TOF) (see Fig. 16.15).
In the example shown in Fig. 8.11, all possible oligonucleotide combinations are synthesized as probes.
This is based on the degeneracy of the genetic code (see Section 5.3). Some amino acids are coded for by
more than one triplet combination. This can be optimized by choosing a region of the protein that has a
high percentage of single or two codon amino acids. The oligonucleotides are made synthetically in the lab
and then used to screen a library to identify the gene (or cDNA) encoding the purified protein. One of the
oligonucleotides will be exactly the same as the cloned gene. For organisms with sequenced genomes (see
Sections 16.4 and 16.5), the protein sequence of their gene products can be simply deduced from the DNA
sequence of the respective genes. As a result of this, and the development of EST-based probes, degenerate
probes are rarely used today.
Unique EST-based probes
The use of EST-based probes is a newer method than making degenerate probes. Although EST-based
probes are no longer frequently used for organisms in which the whole genome sequence is available, they
are still useful for organisms where only limited sequence information is available. ESTs are partial cDNA
sequences of about 200–400 bp (because they represent just a short portion of the cDNA, they are called
“tags”). This method uses cDNA sequence data and identifies a single oligonucleotide rather than a
degenerate mixture. A computer program applies the genetic code to translate an EST into a partial amino
acid sequence. If a match is found with the protein under study, the EST provides the unique DNA
sequence of that portion of cDNA. A probe can then be synthesized and used to screen a library for the
entire cDNA (or genomic) clone.
Recombinant DNA technology and molecular cloning 209
Radioactive and nonradioactive labeling methods T O O L B O X 8 . 4
or g-rays released during decay of the radioisotope; a
phototube in the instrument detects and counts these light
flashes. Phosphorimagers are used to detect radiolabeled
compounds on a surface, storing digital data on the number
of decays in disintegrations per minute (dpm) per small
pixel of surface area. These instruments are commonly
used to quantitate radioactive molecules separated by gel
electrophoresis and are replacing photographic film for this
purpose.
Nonradioactive labeling
As noted above, traditionally, nucleic acids have been
labeled with radioisotopes. These radiolabeled probes are
very sensitive, but their handling is subject to stringent
safety precautions regulated in the US by the federal
Nuclear Regulatory Commission, and, in the case of 32
P and
35
S, the signal decays relatively quickly. More recently, a
series of nonradioactive labeling methods have been
developed that generate colorimetric or chemiluminescent
signals. A widely used label is digoxygenin, a plant steroid
isolated from foxglove, Digitalis. This can be conjugated
to nucleotides and incorporated into DNA, RNA, or
oligonucleotide probes and then detected using an antibody
to digoxygenin. The antibody can be attached covalently
(conjugated) to fluorescent dyes or enzymes that facilitate
signal detection. For example, often anti-digoxygenin
antibodies are conjugated to the enzyme alkaline
phosphate. When a specific substrate is added, the attached
enzyme catalyzes a chemical reaction producing light which
exposes an X-ray film. Another system uses biotin, a
vitamin, and the bacterial protein streptavidin, which binds
to biotin with extremely high affinity. Biotin-conjugated
nucleotides are incorporated as a label and detected using
enzyme-conjugated streptavidin (see Focus box 10.1 for an
application).
FMBC08 9/29/06 11:09 AM Page 209
There are a variety of methods for labeling RNA and DNA.
The choice of method depends on the application. Probes of
the highest specific activity (proportion of incorporated label
per mass of probes) are generated using internal labeling,
where many labeled nucleotides are incorporated uniformly
during DNA or RNA synthesis in vitro. End-labeling involves
either adding a labeled nucleotide to the 3′-hydroxyl end of
a DNA strand or exchanging the unlabeled 5′-phosphate
group for a labeled phosphate. When deciding on a labeling
method, one of the first questions to ask is whether internal
labeling or end-labeling of the nucleic acid is desirable
(Table 1). Internal labeling provides maximal labeling and is
often used for probes to screen libraries or for Southern
blots (see Tool box 8.7). End-labeling is used when precise
definition of one end of the DNA (5′ or 3′) is required. An
example of this is labeling a DNA fragment for use in DNase
I footprinting (see Fig. 9.15), where the researcher wants to
know the orientation of the fragments; that is, is a proteinbinding
site near the 5′ or 3′ end of the DNA sequence?
Common methods of uniform labeling involve DNA or RNA
synthesis reactions; for example, random primed labeling
and synthesis of riboprobes. Some methods for end-labeling
DNA fragments involve DNA synthesis reactions (e.g.
Klenow fill-in), while oligonucleotides are generally endlabeled
by other enzyme-mediated reactions.
Random primed labeling
Random primed labeling is a method of incorporating
radioactive nucleotides along the length of a fragment of
DNA. The DNA is denatured and random oligonucleotides
are annealed to both strands. Each batch of random
oligonucleotides contains all possible sequences (for
hexamers, which are most commonly employed, this would
be 4096 different oligonucleotides), so any DNA template
can be used with this method. The odds are that some of
these primers will anneal to the DNA of interest. The
oligonucleotide primers provide the required free 3′hydroxyl
group for the initiation of DNA synthesis. A Klenow
fragment of E. coli DNA polymerase I is then used to extend
the oligonucleotides, using three unlabeled (“cold”)
nucleotides and one radioactively labeled (“hot”) nucleotide
(or a nonradioactively labeled nucleotide) provided in the
reaction mixture, to produce a uniformly labeled doublestranded
probe. Subsequently, the double-stranded probe is
denatured and added to a hybridization solution (Fig. 1A).
In vitro transcription
RNA can be labeled by in vitro transcription from a DNA
template. The DNA template (often a cDNA) is cloned into a
special plasmid vector so that it can be transcribed under
the control of a promoter specific for recognition by a
bacteriophage RNA polymerase, typically SP6 RNA
polymerase, T7 RNA polymerase, or T3 RNA polymerase.
The transcription reaction is carried out in vitro by the
addition of all four NTPs, with one or more labeled, and the
appropriate phage RNA polymerase (Fig. 1B). Labeled RNA
can be used for tracking the movement and localization of
RNA transcripts in cells, analyzing RNA processing
pathways, and as hybridization probes. RNA probes
(riboprobes) may be either complementary to the sense or
antisense strand of DNA depending on the purpose.
Klenow fill-in
A “fill-in” reaction is used to generate blunt ends
on fragments created by cleavage with restriction
endonucleases that leave 5′ single-stranded overhangs.
The Klenow fragment of E. coli DNA polymerase I is used to
fill in the gaps from 5′ to 3′, in the presence of dNTPs,
including one labeled dNTP (Fig. 1C). The result is a doublestranded
DNA with the 3′ ends labeled.
Table 1 Labeling of nucleic acids.
Labeling method
Random priming
In vitro transcription
Klenow fill-in
Oligonucleotides
Example of application
Hybridization probes
Hybridization probes, tracking
RNA localization
DNase I footprinting
Hybridization probes, EMSA
T O O L B O X 8 . 5 Nucleic acid labeling
Enzyme
Klenow DNA polymerase
Phage SP6, T7, or T3 RNA
polymerase
Klenow DNA polymerase
T4 polynucleotide kinase
Terminal transferase
Type of labeling
Uniform
Uniform
3′ end-labeling
5′ end-labeling
3′ end-labeling
FMBC08 9/29/06 11:09 AM Page 210
Nucleic acid labeling T O O L B O X 8 . 5
Oligonucleotide labeling
Methods for end-labeling oligonucleotides do not involve
DNA synthesis reactions. Instead, they make use of other
enzymes. In 5′ end-labeling, a g-phosphate from ATP is
added to the 5′ end of an oligonucleotide by the enzyme
T4 polynucleotide kinase. In 3′ end-labeling, a labeled
dNTP is added to the 3′ end by the enzyme terminal
transferase.
Figure 1 Some methods for labeling nucleic acids. Two methods of uniform labeling and one method of end-labeling are
depicted that involve nucleic acid synthesis reactions. (A) In random primed labeling, the template DNA is denatured and random
hexamer primers are annealed to both strands. Only one strand is shown for simplicity. The primers provide the 3′-OH for the
initiation of DNA synthesis upon addition of the Klenow fragment of DNA polymerase I, and unlabeled and labeled dNTPs. The
resulting labeled double-stranded DNA probe is denatured and added to a hybridization solution. (B) In vitro transcription generates
a labeled RNA from a DNA template. The DNA template (cDNA) is cloned in a plasmid vector containing a promoter for
bacteriophage SP6 RNA polymerase. The transcription reaction is carried out by the addition of all labeled and unlabeled NTPs and
SP6 RNA polymerase. The labeled RNA probe can then be purified and added to a hybridization solution. (C) Klenow fill-in is used
to create labeled blunt ends on fragments created by cleavage with a restriction endonuclease that leaves a 5′ overhang. The reaction
is conceptually identical to the one described in (A), but with a long primer and a very short segment of single-stranded template.
Denature DNA
Addition of
random hexamer
Fill in reaction
with Klenow fragment
of DNA polymerase I
Denature
Add labeled probe
to hybridization
solution
DNA
(C) Klenow fill-in
(A) Random primed labeling (B) In vitro transcription
Restriction endonuclease
or exonuclease III
Klenow fragment
of DNA polymerase I
dNTPs
+
labeled dNTP
dNTPs
+
labeled dNTP
5′
5′
3′
5′
3′
5′
5′
5'
3′
3′
3′
5′
5′
3′
3′
3′
5′
3′
5′
3′
5′
5′
5′
3′
3′
3′
SP6 RNA polymerase
promoter
Cloned cDNA
Restriction
endonuclease site
Linearize by
restriction
endonuclease
digestion
cDNA
SP6 RNA polymerase
NTPs
+
labeled NTP
RNA transcript
Purify labeled RNA probe
Add to hybridization
solution
5′
3′
5′
3′ 5'
3′
5′
3′
5′ 3′
FMBC08 9/29/06 11:09 AM Page 211
Using an identified cDNA to locate a genomic clone
Since a cDNA contains only the coding region of a gene, researchers often need to isolate a genomic clone
for analysis of regulatory regions, introns, etc. Use of an identified cDNA to locate a genomic clone provides
a highly specific probe for the gene of interest.
8.7 Library screening
Nowadays, because of the wealth of genomic sequence data available for many organisms, a DNA
sequence of interest is more likely to be isolated by polymerase chain reaction (PCR) (see Tool box 8.3)
than by a library screen. DNA cloning and PCR both amplify tiny samples of DNA into large quantities
by repeated rounds of DNA duplication, either carried out by cycles of cell division in a host or cycles of
DNA synthesis in vitro. In PCR, the pair of oligonucleotide primers limits the amplification process to the
particular DNA sequence of interest from the beginning. In contrast, once prepared, a DNA library can be
Chapter 8212
C NH
HO
R4
C C NH
HO
R3
C C NH
HO
R2
C C NH2
HO
R1
C
C NH
HO
R4
C C NH
HO
R3
C C NH
HO
R2
C C NH N
HO
R1
C
C NH
HO
R4
C C NH
HO
R3
C C NH2
HO
R2
C C NH
C C S
O N
H
S
C
S C N
+
Polypeptide chain Phenylisothiocyanate (PITC)
Phenylthiocarbamoyl amino acid
Shortened polypeptide
PITC derivative
Identification
Repeat process
Acid treatment
+
H
R1
Figure 8.10 Protein sequencing by the Edman degradation method. The NH2-terminal end of the
polypeptide to be sequenced is chemically modified by bonding to phenylisothiocyanate (PITC). Acid treatment results
in a PITC derivative of the NH2-terminal amino acid (phenylthiocarbamoyl amino acid) and a polypeptide that is one
amino acid shorter. The PITC derivative can then be identified by analytical methods. The process is repeated for each
amino acid at the NH2-terminus until the polypeptide is sequenced.
FMBC08 9/29/06 11:09 AM Page 212
perpetuated indefinitely in host cells, and can be readily retrieved whenever the researcher wants to seek out
some particular fragment. Assuming a probe is available for the cloned sequence of interest, the library can
be screened using the principles of hybridization. Complementary base pairing of single-stranded nucleic
acids underlies some of the most important biological processes: replication, recombination, DNA repair,
transcription, and translation. Library screening exploits this fundamental ability of double-stranded nucleic
acids to undergo denaturation or melting (separation into single strands) and for complementary single
strands to spontaneously anneal to a labeled nucleic acid probe to form a hybrid duplex (heteroduplex).
The power of the technique is that the labeled nucleic acid probe can detect a complementary molecule in
a complex mixture with exquisite sensitivity and specificity.
Recombinant DNA technology and molecular cloning 213
lys
AAA
AAA
AAA
AAA
AAA
ACC TAC ATG GTG CCC TAA ACT GACTTTACGTATGCG
UGG AUG UAC CAC GGG
AAG
AAG
AAG
AAG
UGG
UGG
UGG
UGG
UGG
UGG
UGG
UGG
AUG
AUG
AUG
AUG
AUG
AUG
AUG
AUG
UAU
UAU
UAC
UAC
UAU
UAU
UAC
UAC
CAU
CAC
CAU
CAC
CAU
CAC
CAU
CAC
GGA
GGT
GGC
GGG
GGA
GGT
GGC
GGG
trp met tyr his gly
Oligonucleotide
Cloned
gene
Screen cloned library to identify
gene encoding purified protein
One of the 32 oligonucleotides is exactly
complementary to the cloned gene
All 32 possible
oligonucleotide
combinations
synthesized as
probes
Partial amino acid
sequence of purified
protein
...etc.
Figure 8.11 Generating degenerate oligonucleotide probes. The coding DNA sequence can be deduced
from the partial amino acid sequence of a protein. In this example, two amino acids, tryptophan (Trp) and methionine
(Met) have only one codon each. Three others, lysine (Lys), histidine (His), and tyrosine (Tyr) are encoded by two
codons, while glycine (Gly) is encoded by codons that include all base combinations at the third position. For this
amino acid sequence, 32 oligonucleotide sequences encompass all the possible combinations of codons. For simplicity,
only eight of these are depicted in the diagram. The exact coding sequence of the gene of interest must be one of the
base combinations. Using a mixture of radioactively labeled oligonucleotides as probes, a cloned library can be screened
to isolate the gene for the complete protein.
FMBC08 9/29/06 11:09 AM Page 213
Like many procedures in molecular biology, the process of library screening sounds simple, but in practice
it can be labor intensive, and may result in “false positives” if the hybridization conditions are not stringent
enough. The example shown in Fig. 8.12 is for screening a cDNA library cloned into plasmid vectors. A
similar protocol would be employed for screening a phage library, but would involve plaque hybridization
instead of colony hybridization.
Transfer of colonies to a DNA-binding membrane
Bacterial colonies with recombinant vectors containing inserts representing the entire library are grown on
nutrient agar plates, forming hundreds or thousands of colonies (Fig. 8.12). The colonies (members of the
library) are transferred to nitrocellulose or nylon membranes by gently pressing to make a replica. Bacteria
attach to the membrane and the cells are then lysed and the DNA purified by treatment with alkali and
proteases. The DNA is denatured to make it single stranded, and fixed to the membrane either by heat
treatment or ultraviolet irradiation. The DNA is covalently bound by its sugar–phosphate backbone and the
unpaired bases are exposed for complementary base pairing.
Colony hybridization
In the next step of library screening, a radioactively labeled, single-stranded DNA probe is applied
(Fig. 8.12). The hybridization step is performed at a nonstringent temperature that ensures the probe will
bind to any clone containing a similar sequence. At the same time, some nonspecific hybridization will
occur because some of the clones will contain limited, but not significant, similarity to the probe. A series
of washes are performed at a stringent temperature that is high enough to remove the probe from all clones
to which it has bound in a nonspecific manner. Heteroduplex stability is influenced by the number of
hydrogen bonds between the bases and base stacking by hydrophobic interactions that hold the two single
strands together. The number of hydrogen bonds is determined by various properties of the heteroduplex,
including the length of the duplex, its GC content, and the degree of mismatch between the probe and the
complementary target DNA sequence. The shorter the duplex, the lower the GC content, and the more
mismatches there are, the lower the melting temperature (Tm) will be because there are fewer hydrogen
bonds and base-stacking interactions to disrupt (see Section 2.6). The appropriate hybridization temperature
is calculated according to the GC content and the percent homology of probe to target according to the
following equation:
Tm = 49.82 + 0.41(% G + C) − (600/l)
where l is the length of the hybrid in base pairs.
It is important that the temperature is not so high that it removes the probe from clones that contain
sequences that are similar (only a few mismatches) or identical to the probe itself (exact complementarity).
Therefore, consideration about the source of the probe (homologous or heterologous) determines the
temperature at which the high stringency washes are performed.
Detection of positive colonies
In the final phase of library screening, an X-ray film is applied to the membrane and is exposed by any
remaining specifically bound radioactive probe. The resulting autoradiogram has a dark spot on the
developed film where DNA–DNA hybrids have formed, by virtue of sequence complementarity to the
radiolabeled probe. If the gene is large, it may be fragmented. Various fragments in different clones may need
to be identified by finding overlapping fragments and reconstructing the order. The original plate is used to
pick bacterial cells with recombinant plasmids that hybridized to the probe. Cells are transferred to medium
for growth and further analysis.
Chapter 8214
FMBC08 9/29/06 11:09 AM Page 214
Recombinant DNA technology and molecular cloning 215
Colonies are transfered
to nitrocellulose
or nylon membrane
Bacteria attached to
membrane
Petri dish with bacterial colonies
Alkali
Wash
Protease
Unpaired bases 80°C for 2 hours
or UV irradiation
DNA
Bacterial cells are
lysed and DNA
is denatured
Radioactive probe
Nonspecific binding Specific binding
Labeled probe is
added to membrane
X-ray film
Radioactive probe
Membrane
Transfer bacterial cells
to medium for growth and
further analysis
Positive
hybridization
DNA is bound to membrane by the
sugar-phosphate backbone
Bacteria
Membrane
membrane
Some bacteria
remain in Petri dish
Washed membrane is
exposed to X-ray film
Pick bacterial colony from original Petri dish
with recombinant DNA that hybridized to probe.
Autoradiogram shows bacterial colony
harbors recombinant DNA of interest
Positive colonies are identified
1
2
3
4 5
+
Figure 8.12 Screening a library by nucleic acid hybridization. The example depicts a method for screening a
cDNA library. Colony hybridization is used to identify bacterial cells that harbor a specific recombinant plasmid. (1) A
sample of each bacterial colony in the library is transferred to a membrane. (2) The bacterial cells on the membrane are
lysed and the DNA is denatured. Using heat or UV treatment, the DNA is covalently bound to the membrane. (3)
The membrane is placed in a hybridization bag along with a labeled single-stranded DNA probe. After hybridization,
the membrane is removed from the bag and washed to remove excess probe and nonspecifically bound probe. (4)
Hybrids are detected by placing a piece of X-ray film over the membrane and exposing for a short time. The film is
developed and the hybridization events are visualized as dark spots on the autoradiogram. (5) From the orientation of
the film, a positive colony containing the insert that hybridized to the probe can be identified. Bacterial cells are picked
from this colony for growth and further analysis.
FMBC08 9/29/06 11:09 AM Page 215
8.8 Expression libraries
Expression libraries are made with a cloning vector that contains the required regulatory elements for
gene expression, such as the promoter region (see Section 10.3). In an E. coli expression vector (plasmid
or bacteriophage), an E. coli promoter is placed next to a unique restriction site where DNA can be
inserted. When a foreign cDNA is cloned into an expression vector in the correct reading frame, the
coding region is transcribed and translated in the E. coli host. Expression libraries are useful for identifying a
clone containing the cDNA of interest when an antibody to the protein encoded by that gene or cDNA is
available. Binding of a radioactively labeled antibody (see Tool box 9.4), using a technique similar to nucleic
acid hybridization, can be used to identify a specific protein made by one of the clones of the expression
library.
8.9 Restriction mapping
Once the clone of interest has been isolated, the first stage of analysis is often the creation of a restriction
map. Restriction mapping provides a compilation of the number, order, and distance between restriction
endonuclease cutting sites along a cloned DNA fragment. In addition, restriction mapping plays an
important role in characterizing DNA, mapping genes, and diagnostic tests for genetic diseases (see
Section 8.10).
To make a restriction map, a cloned DNA fragment is cut with restriction endonucleases and loaded on
to an agarose gel for electrophoresis (Tool box 8.6). The lengths of the DNA fragments can be determined
by comparing their position in the gel to reference DNAs of known lengths in the gel. A DNA fragment
migrates a distance that is inversely proportional to the logarithm of the fragment length in base pairs over
a limited range in the gel. Thus, agarose gel electrophoresis allows the restriction fragment lengths to be
determined. The pattern of cutting in single and double digests indicates what the relationship is between
the two sites. Assume, for example, that you have attempted to subclone a cDNA into a plasmid vector. You
have obtained a positive clone by blue-white screening. Because you want to use the recombinant plasmid
DNA for the preparation of an antisense RNA probe, you need to check that the orientation of the insert in
the plasmid vector is correct. According to the plasmid map shown in Fig. 8.13, if the insert is in the desired
orientation, the fragment sizes generated by a double digest with EcoRI and HindIII will be 4.5 and 1.3 kb,
respectively. If the insert is in the opposite orientation, the order of restriction sites will be reversed and the
fragment sizes will be 3.5 and 2.3 kb. The results of restriction endonuclease digests show that the insert is in
the correct orientation, and that you have successfully subcloned a template for in vitro riboprobe
preparation.
8.10 Restriction fragment length polymorphism (RFLP)
In 1980, Mark Skolnick, Ray White, David Botstein, and Ronald Davis created a restriction fragment
length polymorphism (RFLP, pronounced “rif-lip”) marker map of the human genome. A RFLP is defined
by the existence of alternative alleles associated with restriction fragments that differ in size from each other.
RFLPs are visualized by digesting DNA from different individuals with restriction endonucleases, followed
by gel electrophoresis to separate fragments according to size, then Southern blotting (Tool box 8.7), and
hybridization to a labeled probe that identifies the locus under investigation. A RFLP is demonstrated
whenever the Southern blot pattern obtained with one individual is different from the one obtained with
another individual. These variable regions do not necessarily occur in genes, and the function of most
of those in the human genome is unknown. An exception is a RFLP that can be used to diagnose sickle
cell anemia (Fig. 8.14). In individuals with sickle cell anemia, a point mutation in the β-globin gene has
destroyed the recognition site for the restriction endonuclease MstII. This mutation can be distinguished by
the presence of a larger restriction fragment on a Southern blot in an affected individual, compared with a
shorter fragment in a normal individual.
Chapter 8216
FMBC08 9/29/06 11:09 AM Page 216
RFLPs can serve as markers of genetic diseases
By carefully examining the DNA of members of families that carry genetic diseases, it has been possible to
find forms of particular RFLPs that tend to be inherited with particular diseases. The simplest RFLPs are
those caused by single base pair substitutions. However, RFLPs can also be generated by the insertion of
genetic material such as transposable elements, or by tandem duplications, deletions, translocations, or other
chromosomal rearrangements. In linkage analysis, families in which individuals are at risk for a genetic disease
are identified (i.e. both parents are heterozygous for an autosomal recessive mutation associated with a
particular disease). DNA samples from various family members are then analyzed to determine the frequency
with which specific RFLP markers segregate with the mutant allele causing the disease. This frequency is a
measure of the distance between the markers and the mutation-defined locus.
Generally, the fragment size differences occur not because a restriction site was created or disrupted by the
diseased state itself, but rather because the nucleotide sequence differences just happen to be near the gene
Recombinant DNA technology and molecular cloning 217
Desired orientation
Foreign
DNA
insert
OR
EcoRI EcoR1
BamHI BamHI
BamHI
6.0 kb
Size
markers
Cut with
EcoRI
Cut with
BamHI
Digest with BamHI alone, EcoRI and HindIII together
Load on gel for electrophoresis
Cut with
EcoRI/HindIII
5.8 kb
3.8 kb
2.0 kb
4.5
1.3
5.0 kb
4.0 kb
3.0 kb
2.0 kb
1.0 kb
BamHI
HindIII
HindIII
Plasmid
vector
1.5
1.5
0.8 0.8
0.5
0.5
3.0kb
3.0kb
Figure 8.13 Analysis of recombinant DNA by restriction endonuclease digestion. Assume a 2.0 kb
foreign DNA insert has been successfully ligated into the BamHI site of a 3.8 kb plasmid vector. However, the
orientation of the insert is unknown. Samples of the recombinant plasmid are digested with restriction endonucleases:
one sample is digested with EcoRI, one with BamHI, and one with both EcoRI and HindIII. The resulting fragments
are separated by agarose gel electrophoresis. The sizes of the separated fragments can be measured by comparison with
molecular weight standards in an adjacent lane. EcoRI linearizes the 5.8 kb plasmid which appears as a single band on
the gel. BamHI generates two fragments of 3.8 and 2.0 kb in size, representing the vector and the insert, respectively.
Digestion with EcoRI and HindIII generates two fragments of 4.5 and 1.3 kb. These data indicate that the foreign
DNA has been inserted in the desired orientation. If the DNA had been inserted in the opposite orientation, a double
digest with EcoRI and HindIII would have generated fragment sizes of 3.5 and 2.3 kb.
FMBC08 9/29/06 11:09 AM Page 217
Electrophoresis is the standard method for analyzing,
identifying, and purifying fragments of DNA or RNA that
differ in size, charge, or conformation. It is one of the most
widely used techniques in molecular biology. Walk into any
molecular biology lab, and the odds are you will see at least
one gel apparatus in operation. When charged molecules
are placed in an electric field, they migrate toward the
positive (anode, red) or negative (cathode, black) pole
according to their charge. In contrast to proteins, which can
have either a net positive or net negative charge, nucleic
acids have a consistent negative change due to their
phosphate backbone, and they migrate toward the anode.
Proteins and nucleic acids are separated by electrophoresis
within a matrix or “gel.” Most commonly, the gel is cast in
the shape of a thin slab, with wells for loading the sample.
The gel is immersed within an electrophoresis buffer that
provides ions to carry a current and some type of buffer to
maintain the pH at a relatively constant value.
The gels used for eletrophoresis are composed either of
agarose or polyacrylamide. Agarose gels are used in a
horizontal gel apparatus, while polyacrylamide gels are
used in a vertical gel apparatus. These two differ in
resolving power. Agarose gels are used for the analysis and
preparation of fragments between 100 and 50,000 bp in size
with moderate resolution, and polyacrylamide gels are used
for the analysis and preparation of small molecules with
single nucleotide resolution. This high resolution is required
for applications such as for DNA sequencing (see Section
8.11), DNase I footprinting, and electrophoretic mobility
shift assays (see Fig. 9.15). In contrast to agarose,
polyacrylamide gels are also widely used for the
electrophoresis of proteins (see Tool box 9.3).
Agarose gel electrophoresis
Agarose is a polysaccharide extracted from seaweed.
Agarose gels are easily prepared by mixing agarose powder
with buffer solution, boiling in a microwave to melt, and
pouring the gel into a mold where the agarose (generally
0.5–2.0%) solidifies into a slab (Fig. 1). Agarose gels have a
large range of separation, but relatively low resolving
power. By varying the concentration of agarose, fragments
of DNA from about 100 to 50,000 bp can be separated using
standard electrophoretic techniques. A toothed comb forms
wells in the agarose. The agarose slab is submerged in a
buffer solution and an electric current is passed through the
gel, with the negatively charged DNA (due to the phosphate
in the sugar–phosphate backbone) moving through the gel
from the negatively charged electrode (cathode) towards
the positive electrode (anode). Pores between the agarose
molecules act like a sieve that separates the molecules by
size. In gel filtration chromatography (see Tool box 8.1),
nucleic acids flow around the spherical agarose beads. In
contrast, in an electrophoretic gel, nucleic acids migrate
through the pores; thus fragments separate by size with the
smallest pieces moving the fastest and farthest through the
gel. Because DNA by itself is not visible in the gel, the DNA
is stained with a fluorescent dye such as ethidium bromide
(EtBr). EtBr intercalates between the bases causing DNA to
fluoresce orange when the dye is illuminated by ultraviolet
light.
Pulsed field gel electrophoresis (PFGE)
DNA changes conformation as it moves through gels,
alternating between extended and compact forms. The
mobility of a DNA molecule depends upon the relationship
between the pore size of the gel and the globular size of the
DNA in its compact form, with larger molecules moving
more slowly. Once DNA reaches a critical size, the molecule
is too large to fit through any of the pores in an agarose gel
and can move only as an extended molecule. The mobility of
the DNA thus becomes independent of size, resulting in comigration
of all large molecules. To fractionate large DNA
molecules such as YACs (see Section 8.4), agarose gel
electrophoresis is carried out with a pulsed electric field.
The periodic field causes the DNA molecule to reorient;
longer molecules take longer to realign than shorter ones,
thus delaying their progress through the gel and allowing
them to be resolved. DNA molecules up to 200–400 Mb in
size have been separated by various pulsed field-based
methods.
Polyacrylamide gel electrophoresis (PAGE)
Polyacrylamide is a cross-linked polymer of acrylamide.
The length of the polymer chains is dictated by the
concentration of acrylamide used, which is typically
between 3.5 and 20%. Polyacrylamide gels are significantly
more cumbersome to prepare than agarose gels. Because
oxygen inhibits the polymerization process, they must be
T O O L B O X 8 . 6 Electrophoresis
Chapter 8218
FMBC08 9/29/06 11:09 AM Page 218
involved. A particular form of a polymorphism that is close to a diseased gene tends to stay with that gene
during crossing-over (recombination) in meiosis. Relatively large segments of chromosomes are involved in
crossing-over, so markers close together on a given chromosome are more likely to be transmitted together
(not separated during recombination) than those that are far apart. Linkage thus refers to the likelihood
of having one marker transmitted with another through meiosis. Markers that are transmitted together
frequently are said to be closely linked. Thus RFLPs can serve as markers of disease, even when the RFLP is
Recombinant DNA technology and molecular cloning 219
Electrophoresis T O O L B O X 8 . 6
poured between glass plates. Gels can be either
nondenaturing or denaturing (e.g. contain 8 M urea).
Denaturing gels are used, for example, when singlestranded
DNA is being analyzed, as in DNA sequencing (see
Fig. 8.15). Polyacrylamide gels have a rather small range of
separation, but very high resolving power. In the case of
DNA, polyacrylamide is used for separating fragments
of less than about 500 bp. However, under appropriate
conditions, fragments of DNA differing in length by a single
base pair are easily resolved. Bands in polyacrylamide gels
are usually detected by autoradiography, although silver
staining can also be used.
Fill wells with
DNA solutions
(A)
Gel support
Agarose gel
Buffer solution Direction of movement
+_
Ethidium bromide
H2N NH2
Br−
C2H5
N+
(B)
Figure 1 Agarose gel electrophoresis is used to separate DNA (and RNA) molecules according to size. (A) A
pipet is used to load DNA samples on an agarose gel in a horizontal gel apparatus. The negatively charged nucleic acids move
toward the positive electrode. Larger molecules move more slowly than smaller molecules, so the DNA (or RNA) molecules are
separated according to size. (B) Photograph of an agarose gel stained with ethidium bromide (EtBr) to make the DNA bands visible.
EtBr molecules intercalate between the bases (see inset) causing the DNA to fluoresce orange when the gel is illuminated with UV
light. (Photograph courtesy of Vinny Roggero, College of William and Mary.)
FMBC08 9/29/06 11:09 AM Page 219
Digest DNA with
restriction endonucleases
Perform agarose gel electrophoresis
on the DNA fragments from different digests
DNA DNA restriction fragments Buffer solution Agarose gel
DNA fragments are bound to the
membrane in positions identical to
those on the gel
Transfer (blot) gel to
nitrocellulose or nylon
membrane using Southern
blot technique
DNA fragments fractionated by size
(visible under UV light if gel is
soaked in ethidium bromide)
Weight
Absorbent
paper
Soak gel in NaOH; neutralize
Membrane
Wick
Gel
Buffer
Longer DNA
fragments
Shorter DNA
fragments
Hybridize
membrane
with
radioactively
labeled probe
Radioactive
probe solution
Expose membrane to X-ray film.
Resulting autoradiograph shows
hybridized DNA fragments
2
345
6 7
+−
1
Figure 1 Southern blot. The steps involved in performing a Southern blot hybridization are depicted. (1–3) Samples of the DNA
to be probed are cut with restriction endonucleases and the fragments are separated by gel electrophoresis. (4) After soaking the gel
in an alkaline solution to denature the DNA, the single-stranded DNA is transferred to a DNA-binding membrane for hybridization
by making a sandwich of the gel, membrane, filter paper, and absorbent paper. The blot is held in place with a weight. (5) Capillary
action draws the buffer through the gel, transferring the pattern of DNA fragments from the gel to the membrane. (6) The membrane
is hybridized with a radioactively labeled probe and then washed to remove any nonspecifically bound probe. (7) The membrane is
overlaid with a piece of X-ray film for autoradiography. The hybridized fragments show up as bands on the X-ray film.
T O O L B O X 8 . 7 Southern blot
Chapter 8220
FMBC08 9/29/06 11:09 AM Page 220
not within the disease gene. RFLPs have been useful for detecting such genetic diseases as cystic fibrosis,
Huntington’s disease, and hemophilia.
RFLPs were the predominant form of DNA variation used for linkage analysis until the advent of PCR.
The main advantage of RFLP analysis over PCR-based protocols is that no prior sequence information or
oligonucleotide synthesis is required. However, when a PCR assay for typing a particular locus is developed,
it is generally preferable to RFLP analysis. In some cases, a combined approach of PCR and RFLP is used
for analysis (Disease box 8.1).
8.11 DNA sequencing
Until 1977, determining the sequence of bases in DNA was a labor-intensive process that could be applied
only to very short sequences, such as the template region for tRNA. With the development of techniques
for rapid, large-scale DNA sequencing, today molecular biologists determine the order of bases in DNA
as a matter of course. DNA sequencing is used to provide the ultimate characterization once a gene has
Recombinant DNA technology and molecular cloning 221
Southern blot T O O L B O X 8 . 7
The capillary transfer of fragments of DNA separated on an
agarose gel from the gel to a solid support was first carried
out by Edward Southern. This technique thus bears his name
and is called a Southern blot. Southern blots have many
applications, but their primary purpose is to identify a specific
gene fragment from the often many DNA bands on a gel.
Southern blot method
In the classic Southern blot method, DNA samples are first
digested with one or more restriction endonucleases
to reduce the size of the DNA molecules (Fig. 1). An
endonuclease with a six base pair recognition sequence,
statistically cuts once every 46 base pairs – producing many
thousands of restriction fragments in the genomes of higher
eukaryotes. For example, 732,422 restriction fragments will
be generated in mouse genomic DNA by EcoRI. The digested
DNA is then separated by agarose gel electrophoresis. The
DNA fragments are denatured by an alkaline (high pH)
buffer, and the single strands are transferred by capillary
action to a nylon or nitrocellulose membrane. The membrane
is a replica of the agarose gel. To identify the DNA fragment
that contains a gene of interest, a specific DNA probe, such
as a small region of the DNA of interest, can be used to
hybridize to the membrane, as described earlier for colony
hybridization (see Section 8.7). If the probe hybridizes to
fragments on the membrane, then photographic film
applied to the membrane will be exposed where the probe
has hybridized to a specific DNA band or bands (Fig. 1).
Applications
Southern blots can be used to complement restriction
mapping of cloned DNA and to identify overlapping
fragments. For example, the exact location of a 2.0 kb cDNA
within a 10 kb insert of foreign DNA can be identified so that
it can be isolated for further analysis or sequencing.
Alternatively, Southern blots can used to identify structural
differences between genomes, through analysis of RFLPs,
or to study families of related DNA sequences. To illustrate
this point, assume that a gene of interest does not contain
any internal HindIII sites. If a clone (e.g. a cDNA clone for
some gene) is hybridized to a HindIII digestion of the DNA
sample and two fragments are seen, then it can be
concluded that the organism being analyzed has two copies
of the gene. Normally, it is not known at the start of analysis
what restriction endonuclease sites are located in the gene,
so a series of digestions and hybridizations are performed.
If four out of the five restriction endonucleases reveal two
bands, and the probe hybridizes to three fragments of DNA
digested with a fifth restriction endonuclease (e.g. EcoRI),
then it can be concluded that two genes exist and one of
these genes contains a restriction endonuclease site for
EcoRI. In the case of transgenic animals and plants,
Southern blots can be used to determine whether the
foreign gene is present and is now part of the host
chromosome (see Sections 15.2 and 15.6). The integration of
foreign DNA can be visualized by an increase in restriction
fragment sizes.
FMBC08 9/29/06 11:09 AM Page 221
Chapter 8222
D I S E A S E B O X 8 . 1 PCR-RFLP assay for maple syrup urine disease
mR
Leu, Ile, or Val
Branched chain α−keto
acid dehydrogenase
Defective in MSUD
CH
NH3
COO− R C
O
COO− R C
O
S CoA
NAD+,
CoA SH
NADH + H+,
CO2
+
Transamination
400 bp
186 bp (Uncut)
170 bp (MSUD)
147 bp (Normal)
1 2 3 4 5 6 7 8 9 10 11
300 bp
200 bp
100 bp
(A)
(B)
Figure 1 Diagnosis of maple syrup urine disease (MSUD). (A) Degradation of the amino acids leucine, isoleucine, and
valine starts with transamination followed by oxidative decarboxylation of the respective keto acids. The latter reaction is carried out
by a multienzyme complex, called the branched-chain α-keto acid dehydrogenase complex, which is defective in MSUD patients.
(B) Genotype analysis of MSUD by PCR-RFLP assay. DNA samples were amplified by PCR with primers specific for the MSUD
allele. Following digestion with restriction endonuclease ScaI, samples were visualized by agarose gel electrophoresis and staining
with ethidium bromide. Heterozygous individuals are indicated by the presence of a 170 and 147 bp DNA fragment: lane 2 (father),
lane 5 (sibling), lane 9 (mother), and lane 10 (maternal grandmother). Individuals homozygous for the normal allele are indicated by
the presence of the 147 bp DNA fragment only: lane 3 (paternal grandmother) and lanes 6–8 (maternal great grandfather, maternal
grandfather, maternal great grandmother, respectively). Lane 4 indicates the resulting 170 bp fragment from the family member
homozygous for the MSUD allele. Lane 11 shows the undigested 186 bp PCR product. (Love-Gregory, L.D., Dyer, J.A., Grasela,
J., Hillman, R.E., Philips, C.L. 2001. Carrier detection and rapid newborn diagnostic test for the common Y393N maple syrup
urine disease allele by PCR-RFLP: culturally permissible testing in the Mennonite community. Journal of Inherited and Metabolic
Diseases 24:393–403, Fig. 2. Copyright © 2001 SSIEM and Kluwer Academic Publishers. Reprinted with kind permission of
Springer Science and Business Media.)
FMBC08 9/29/06 11:09 AM Page 222
been cloned or amplified by PCR. Although a sequence on its own is of limited value, it is the necessary
stepping-stone to more informative analyses of the cloned gene. DNA sequencing is used to identify genes,
determine the sequence of promoters and other regulatory DNA elements that control expression, reveal the
fine structure of genes and other DNA sequences, confirm the DNA sequence of cDNA and other DNA
synthesized in vitro (for example, after in vitro mutagenesis to confirm the mutation), and help deduce the
amino acid sequence of a gene or cDNA from the DNA sequence. With the advent of automated DNA
sequencing technology, large genome sequencing projects are yielding information about the evolution of
genomes, the location of coding regions, regulatory elements, and other sequences, and the presence of
mutations that give rise to genetic diseases (see Section 16.3).
Recombinant DNA technology and molecular cloning 223
Maple syrup urine disease (MSUD) was first described in
1954. It is a metabolic disorder inherited as an autosomal
recessive that affects the metabolism of the three
branched-chain amino acids, leucine, isoleucine, and valine.
In a normal individual, when more protein is consumed than
is needed for growth, the branched-chain amino acids are
degraded to generate energy. Breakdown of these amino
acids involves a series of chemical reactions. The second
step of the degradation pathway is mediated by an
enzyme system consisting of six components, called the
multienzyme branched-chain a-keto acid dehydrogenase
complex (Fig. 1). In MSUD, one or several of the genes
encoding components of this complex are mutated. Because
the degradation pathway is blocked, the a-keto acid
derivatives of isoleucine, leucine, and valine accumulate in
the blood and urine. This accumulation of keto acids gives
the urine of affected children a sweet odor resembling
maple syrup, and causes a toxic effect that interferes with
brain function.
Infants with classic MSUD appear normal at birth and
become symptomatic within 4–7 days after birth. They
follow a progressive course of neurological deterioration,
exhibiting lethargy, seizures, coma, and death within the
first 2–3 weeks of life if untreated. Early diagnosis is
essential for the child with MSUD to develop normally.
Treatment involves a special, carefully controlled diet that
requires detailed monitoring of protein intake. The diet
centers around a synthetic formula that provides nutrients
and all the amino acids except for leucine, isoleucine, and
valine. These three amino acids are then added to the diet in
carefully controlled amounts to provide enough of these
essential amino acids for normal growth and development
without exceeding the level of tolerance. In older patients,
this special metabolic product provides basic nutrients
and takes the place of cow’s milk in a normal diet. The
remainder of the diet is essentially a vegetarian diet.
Worldwide, the incidence of MSUD is one in
185,000–225,000; however, in certain Old Order Mennonite
communities, the incidence of classic MSUD is estimated to
be one in 176 live births. The defect in Mennonite MSUD
patients is caused by a single nucleotide change in one of
the genes encoding a component of the enzyme complex.
The missense mutation results in a tyrosine (Y) to
asparagine (N) substitution, called the Y393N allele. MSUD
in the non-Mennonite population is clinically and genetically
heterogeneous; however the Y393N allele is present in a
significant portion of the non-Mennonite MSUD population.
A mismatch PCR-RFLP assay has been designed to
identify the Y393N allele. Owing to religious and cultural
preferences, prenatal testing is not permitted in the
Mennonite community. Hence, neonatal testing is vital.
Various tests are available to monitor the levels of the
amino acids and their a-keto acid derivatives in the blood
and urine. Traditional serum-based assays may not give
results quickly enough, and there have been reports of
infants dying before newborn screening results were
reported. The mismatch PCR-RFLP assay provides rapid
turnaround times. Since the assay is DNA-based it does
not require time for the levels of keto acid derivatives to
increase in the blood serum, which may take up to 72 hours.
Buccal swabs or blood samples are used and results are
available in a minimum of 8 hours. Identification of the
normal allele (147 bp) results from the cleavage of a PCR
product at a ScaI site. Identification of the Y393N allele
(170 bp) results in the absence of this second ScaI site
(Fig. 1).
PCR-RFLP assay for maple syrup urine disease D I S E A S E B O X 8 . 1
FMBC08 9/29/06 11:09 AM Page 223
Manual DNA sequencing by the Sanger “dideoxy” DNA method
In 1977, Frederick Sanger, Allan Maxam, and Walter Gilbert pioneered DNA sequencing. The Maxam and
Gilbert sequencing method uses a chemical method that involves selective degradation of bases. The most
widely used method for DNA sequencing is the Sanger or “dideoxy” method, which is, in essence, a DNA
synthesis reaction (Fig. 8.15). In this method, single-stranded DNA is mixed with a radioactively labeled primer
to provide the 3′-OH required for DNA polymerase to initiate DNA synthesis. The primer is usually
complementary to a region of the vector just outside the multiple cloning site. The sample is then split into
four aliquots, each containing DNA polymerase, four dNTPs (at high concentration), and a low concentration
of a replication terminator. The replication terminators are dideoxynucleoside triphosphates (ddNTPs) that
are missing the 3′-OH. Because they lack the 3′-OH, they cannot form a phosphodiester bond with another
nucleotide. Thus, each reaction proceeds until a replication-terminating nucleotide is added, and each of the four
sequencing reactions produces a series of single-stranded DNA molecules, each one base longer than the last.
The polymerase of choice for DNA sequencing is phage T7 DNA polymerase (called “Sequenase”). The
sequencing mixtures are loaded into separate lanes of a denaturing polyacrylamide gel and electrophoresis is
used to separate the DNA fragments. Autoradiography is used to detect a ladder of radioactive bands. The
radioactive label (primer) is at the 5′ end of each newly synthesized DNA molecule. Thus, the smallest
fragment at the bottom of the gel represents the 5′ end of the DNA. Reading the sequence of bases from
the bottom up (5′ → 3′) gives the sequence of the DNA molecule synthesized in the sequencing reaction.
The sequence of the original strand of DNA is complementary to the sequence read from the gel (3′ → 5′).
Chapter 8224
Region recognized
by probe
βA/βS βA/βS βA/βA βS/βS βA/βS
Patient Genomic DNA
Digest with Mst II
Sickle cell βS
globin gene
Normal βA
globin gene
CCTGAGG
CCTGAGG
CCTGAGG
CCTGAGG
CCTGTGG
CCTGAGG
1.35 kb
1.35 kb
1.15 kb
1.15 kb
Southern blot
5′
5′ 3′
3′
I
I
1 2
2
3
II
Figure 8.14 Diagnosis of sickle cell anemia by restriction fragment length polymorphism (RFLP) and
Southern blot. Black arrows represent the location of recognition sites for the restriction endonuclease MstII in the
β-globin gene. In the mutant β-globin gene (βS
), a point mutation (GAG → GTG) has destroyed one MstII recognition
site. Digestion of patient genomic DNA with MstII results in a 1.35 kb DNA fragment, compared with a 1.15 kb
DNA fragment in normal individuals. For diagnosis, the restriction-digested DNA fragments are separated by gel
electrophoresis and transferred to a nylon or nitrocellulose membrane (see Tool box 8.7). The fragments are visualized
by hybridization using a probe that spans a portion of the β-globin gene where the 1.15 kb MstII restriction fragment
resides. In the pedigree, the family has one unaffected homozygous normal daughter (II-1), an affected homozygous
son (II-2), and an unaffected heterozygous fetus (II-3). The genotypes of each family member can be read directly
from the Southern blot. (Wilson, J.T., Milner, P.F., Summer, M.E., Nallaseth, F.S., Fadel, H.E., Reindollar, R.H.,
McDonough, P.G., Wilson, L.B. 1982. Use of restriction endonucleases for mapping the allele for βS
-globin.
Proceedings of the National Academy of Sciences USA 79:3628–3631; and Chang, J.C., Alberti, A., Kan, Y.W. 1983. A
β-thalassemia lesion abolishes the same MstII site as the sickle mutation. Nucleic Acids Research 11:7789–7794.)
FMBC08 9/29/06 11:09 AM Page 224
Recombinant DNA technology and molecular cloning 225
GC T A
5′ 3′
PP
P
P
P
C T T C G
T
A
G
C
T
A
T
A
A
C
C
C
T
T
T
G
G
Single-stranded
DNA of unknown
sequence
Radioactively
labeled probe
OHO
O
O–
P
O
O–
P
O
O–
PO O O
3′
eparate by
gel electrophoresis
-ray film
Read sequence
of original strand
q
2′3′ P
5′
(A)
(B)
A C G T
Figure 8.15 Sanger “dideoxy” DNA sequencing. (A) Four DNA synthesis reaction mixes are set up using
template DNA, a labeled primer, DNA polymerase, and a mixture of dNTPs and one each of the four dideoxy NTPs
(ddNTPs). The direction of synthesis is from 5′ to 3′. The radioactive products of each reaction mixture are separated
by polyacrylamide gel electrophoresis and located by exposing the gel to X-ray film. The nucleotide sequence of the
newly synthesized DNA is read directly from the autoradiogram in the 5′ → 3′ direction, beginning at the bottom
of autoradiogram. The sequence in the original template strand is its complement (3′ → 5′). (Inset) The random
incorporation of dideoxy ATP into the growing chain generates a series of smaller DNA fragments ending at all possible
positions where adenine is found in the newly synthesized fragments. These correspond to positions where thymine
occurs in the original template strand. (B) An exposed X-ray film of a DNA sequencing gel. The four lanes represent A,
C, G, and T dideoxy reaction mixes, respectively. (Photograph courtesy of Jim Nicoll, College of William and Mary.)
FMBC08 9/29/06 11:09 AM Page 225
This method can separate DNA of approximately 500 nt. For longer sequences, overlapping fragments are
sequenced. The technique is very laborious and the sequences have to be read by hand.
Automated DNA sequencing
In 1986, Leroy Hood and Lloyd Smith automated Sanger’s method. In this new sequencing technology,
radioactive markers are replaced with fluorescent ones. Each ddNTP terminator is tagged with a different
color of fluorophore: red, green, blue, or yellow. Thus, instead of having to run four separate sequencing
reactions, the reactions can be combined into one tube. The first automated sequencer made use of a
polyacrylamide gel to resolve the samples, a laser to excite the dye molecules as they reached a detector near
the end of the gel, and a computer to read the results as a DNA sequence. In this system each automated
sequencer was able to produce 4800 bases of sequence per day. The current automated systems replace the
old-style gel with arrays of tiny capilliaries, each of which acts as a “lane.” A pump loads special capillaries
with a polymer that serves as the separation matrix. DNA samples in a 96-well plate are loaded into the
capillary array by a short burst of electrophoresis, called “electrokinetic injection.” The capillary array is
immersed in running buffer and the DNA fragments then migrate through the capillary matrix by size,
smallest to largest. As the DNA fragments reach the detection window, a laser beam excites the dye
molecules causing them to fluoresce. Emitted light from 96 capillaries is collected at once, spectrally
separated into the four colors and focused onto a CCD camera. Computer software interprets the pattern of
peaks to produce a graph of fluorescence intensity versus time (electropherogram), which is then converted
to the DNA sequence (Fig. 8.16). With this system, as many as 2 million bases can be sequenced per day.
Chapter summary
Insights from bacteriophage λ cohesive sites and bacterial restriction and modification systems led to the
development of genetic engineering, and the characterization of restriction endonucleases. Type II restriction
endonucleases are widely used for mapping and reconstructing DNA in vitro because they recognize specific
4–8 bp sequences in double-stranded DNA and make cuts in both strands just at these sites. Restriction
endonucleases function as homodimers. The first contact with DNA is nonspecific. By linear diffusion
(sliding) along the DNA in combination with repeated dissociation/reassociation (hopping/jumping), the
enzyme locates the target restriction site. The recognition process triggers a large conformational change in
the enzyme and DNA, which leads to catalysis. Because the cuts in the two strands are frequently staggered,
restriction endonucleases can create sticky ends that help link together two DNA molecules from different
sources in vitro. DNA ligase is used to join the two pieces of DNA, forming a recombinant DNA molecule.
Cloning vectors are carrier DNA molecules that can independently replicate themselves and the foreign
DNA segments they carry in host cells. Sources of foreign DNA include genomic DNA, cDNA, polymerase
chain reaction (PCR) products, and chemically synthesized oligonucleotides. There are many possible
choices of vector depending on the purpose of cloning and the size of the foreign insert. The classic
cloning vectors are plasmids, phages, and cosmids, which are limited to inserts of up to 10, 20, or 45 kb,
respectively. A new generation of artificial chromosome vectors that can carry much larger inserts include
bacterial artificial chromosomes (BACs), yeast artificial chromosomes (YACs), and mammalian artificial
chromosomes (MACs).
Among the first generations of plasmid cloning vectors were pUC plasmids that replicate autonomously
in bacterial cells after transformation of the bacteria. These have an ampicillin resistance gene and a
multiple cloning site that interrupts a partial lacZ (β-galactosidase) gene. The multiple cloning sites make it
convenient to carry out directional cloning into two different restriction sites. Ampicillin-resistant clones are
screened for those that do not make active β-galactosidase and therefore do not turn the indicator substrate,
X-gal, blue. Positive bacterial colonies can be amplified in liquid growth medium, followed by purification
of the amplified recombinant plasmid DNA by liquid chromatography methods. Ion-exchange
chromatography can be used to separate substances according to their charges. Gel filtration chromatography
Chapter 8226
FMBC08 9/29/06 11:09 AM Page 226
uses columns filled with porous resins that let in smaller substances, but exclude larger ones. Thus, the
smaller substances are slowed in their journey through the column, but larger substances travel relatively
rapidly through the column.
Engineered phage λ from which certain nonessential genes have been removed to make room for inserts
are useful for preparing genomic libraries, in which it is important to have large pieces of genomic DNA
in each clone. Even more useful are YAC vectors that are designed to act like chromosomes in host yeast
cells, and can accommodate up to 1 Mb of foreign DNA. YAC vectors included an origin of replication,
a centromere, telomeres, and growth selectable markers in each arm. Positive selection is carried out by
auxotrophic complementation for molecules in which the arms are joined together. Recombinant YACs
are often screened for by a “red-white” selection process, in which insertion of foreign DNA leads to the
expression of a red pigment in particular mutant strains of yeast.
A genomic library contains DNA fragments that represent the entire genome of an organism. The library
created from all the cDNAs derived from the expressed mRNAs in a specific cell type forms a cDNA library
Recombinant DNA technology and molecular cloning 227
Computer
Sequencing Machine
(B)
Detector Laser beam
A C TG
(A)
AACACCATAA AA A A A A AA A A AAAC CC C CCAG G G G G G G G G G GGGGT T T T T T T T TT TT T TG G
AACACCATAA AA A A A A AA A A AAAC CC C CCAG G G G G G G G G G GGGGT T T T TT T T TT T T T TG G
130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149150 151 152 153 154 155 156 157 158 159 160 161 162 163 164165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186187 188189
9946
0
A
T
G
C
AT T T T T TTA AG G GG GC C C C C
Figure 8.16 Automated DNA sequencing. (A) The diagram depicts the steps involved in automated DNA
sequencing. This technique uses dideoxynucleotides, just as in the manual technique shown in Fig. 8.15, but the
primers used in each of the four reactions are tagged with different fluorescent molecules. The products from each tube
will emit a different color fluorescence when excited by light. (B) Sample computer printout of an automated DNA
sequencing experiment. (Electropherogram courtesy of Ghislain Bonamy, College of William and Mary.)
FMBC08 9/29/06 11:09 AM Page 227
of cDNA clones. To make a cDNA library, one can synthesize cDNAs one strand at a time, using mRNAs
from a cell as templates for the first strands, and these first strands as templates for the second strands.
Reverse transcriptase generates the first strands and the Klenow subunit of E. coli DNA polymerase I
generates the second strands. Double-stranded DNA linkers with ends that are complementary to an
appropriate cloning vector are added to the cDNA before ligation into the cloning vector. Gene coding
sequences of expressed genes are represented in the library. Sequences corresponding to introns and
regulatory regions are not present.
The polymerase chain reaction (PCR) amplifies a region of DNA between two predetermined sites.
Oligonucleotides complementary to these sites serve as primers for the synthesis of copies of the DNA
between the sites. Each cycle of PCR doubles the number of copies of the amplified DNA until a large
quantity has been made. PCR is used extensively in many areas of molecular cloning, analysis of gene
expression, and diagnosis of genetic diseases.
Particular recombinant DNA clones in a library can be detected by colony or plaque hybridization with
labeled probes, or with antibodies if an expression vector is used. Specific clones can be identified using
heterologous or homologous probes that bind to the gene itself. Knowing the amino acid sequence of a gene
product, one can design a set of degenerate or expressed sequence tag (EST) based oligonucleotides that
encode part of this amino acid sequence. cDNA probes are often used to screen genomic libraries.
There are a variety of methods for labeling RNA and DNA. Probes of the highest specific activity are
generated using internal labeling, where many labeled nucleotides are incorporated uniformly during DNA
or RNA synthesis in vitro. End-labeling involves either adding a labeled nucleotide to the 3′-OH end of a
DNA strand or exchanging the unlabeled 5′-phosphate group for a labeled phosphate, and is used when
precise definition of one end of the DNA is required. If the probe is radiolabeled one can detect it by
autoradiography, using X-ray film or a phosphorimager, or by liquid scintillation counting. Some very
sensitive nonradioactive labeling methods are now available. Those that employ chemiluminescence can be
detected by autoradiography or by phosphorimaging. Those that produce colored products can be detected
directly.
Restriction mapping determines the number, order, and distance between restriction endonuclease
cutting sites along a cloned DNA fragment. To make a restriction map, a cloned DNA fragment is cut with
restriction endonucleases and loaded on an agarose gel for electrophoresis. Both DNA and RNA fragments
can be separated by size using gel electrophoresis. The most common gel used in nucleic acid electrophoresis
is agarose, but polyacrylamide is used for the separation of smaller fragments such as in DNA sequencing.
Some restriction fragment length polymorphisms (RFLPs) are used as markers for genetic diseases.
Labeled DNA (or RNA) probes can be used to hybridize to DNAs of the same, or very similar, sequence
on a Southern blot. The number of bands that hybridize to a short probe gives an estimate of the number
of closely related genes in an organism. Southern blots can be used to complement restriction mapping of
cloned DNA and to identify overlapping fragments, or to identify structural differences between genomes,
through analysis of RFLPs.
The Sanger DNA sequencing method uses a radiolabeled primer to initiate synthesis by DNA polymerase
and dideoxynucleotides (ddNTPs) to terminate DNA synthesis, yielding a series of labeled DNA fragments,
each one base longer than the last. These fragments can be separated according to size by electrophoresis.
The last base in each of these fragments is known, because we know which ddNTP was used to teminate
each of four reactions. Ordering these fragments by size tells us the base sequence of the DNA. The
sequence of the original strand of DNA is complementary to the sequence read from the autoradiograph
of the gel. In automated DNA sequencers, radioactive markers are replaced with fluorescent ones. An
electropherogram – a graph of fluorescence intensity versus time – is converted to the DNA sequence.
Analytical questions
1 You have attempted to ligate a 1.5 kb fragment of foreign DNA into the EcoRI site in the multiple
cloning site of the 4.0 kb plasmid vector shown below:
Chapter 8228
FMBC08 9/29/06 11:09 AM Page 228
Recombinant DNA technology and molecular cloning 229
Ampicillin
resistance gene
LacZ
gene
Hind III
EcoRI
SmaI
Multiple cloning site
3kb 2kb 1kb
1 2 3 4
Probe A
Probe B
(a) After ligation you use the DNA in the ligation mixture to transform host bacteria. Why is it important to use
host bacteria that are deficient for restriction modification?
(b) You screen the bacteria that supposedly have been transformed with recombinant plasmid DNA. Some of the
bacterial colonies growing on the nutrient agar plate that contains ampicillin and X-gal are white and some are
blue. Explain these results.
(c) To confirm the presence of the foreign DNA insert, you perform EcoRI restriction endonuclease digests on
DNA extracted from bacterial colonies. Draw a diagram of an agarose gel showing the orientation of the
positive and negative electrodes and the pattern of bands (label their size in kilobases) you would expect to
see for EcoRI-digested recombinant plasmid and EcoRI-digested nonrecombinant plasmid vector, after
electrophoresis and staining of the gel with ethidium bromide.
2 A chromatographic column in which oligo-dT is linked to an inert substance is useful in separating
eukaryotic mRNA from other RNA molecules. On what principle does this column operate?
3 Starting with the nucleotide sequence of the human DNA ligase I gene, describe how you would search
for a homologous gene in another organism whose genome has been sequenced, such as the pufferfish
Tetraodon nigroviridis. Then, describe how you would obtain the protein and test it for ligase activity.
4 You plan to use the polymerase chain reaction to amplify part of the DNA sequence shown below, using
oligonucleotide primers that are hexamers matching the regions shown in bold. (In practice, hexamers are
too short for most purposes.) State the sequence of the primer oligonucleotides that should be used,
including their polarity (5′ → 3′), and give the sequence of the DNA molecule that results from
amplification.
5′-TAGGCATGCAATGGTAATTTTTCAGGAACCAGGGCCCTTAAGCCGTAGGCAT-3′
3′-ATCGGTACGTTACCATTAAAAACTCCTTGGTCCCGGGAATTCGGCATCGGTA-5′
5 The following is a physical map of a region you are mapping for RFLP analysis:
FMBC08 9/29/06 11:09 AM Page 229
NTP
N
H H
N
dNTP
O O O
ddNTP
ON
N
H H
N
ON
N
H H
N
ON
PPPPPPPPP
The numbered vertical lines represent restriction sites recognized by SmaI. Sites 2 and 3 are polymorphic,
the others are not. You cut the DNA with SmaI, electrophorese the fragments, and Southern blot them
to a membrane. You have a choice of two probes that recognize the DNA regions shown above: probe A,
green line; probe B, blue line.
(a) Explain which probe you would use for analysis and why the other choice would be unsuitable.
(b) Give the sizes of bands you will detect in individuals homozygous for the following genotypes with respect to
sites 2 and 3:
6 Complete the incomplete diagrams below to show the key structural difference between an NTP, dNTP,
and ddNTP (e.g. CTP, dCTP, ddCTP):
(a) What do “d” and “dd” stand for?
(b) Explain why ddNTPs are called “chain terminators” in DNA sequencing reactions.
7 The nucleotide sequence of a DNA fragment was determined by the Sanger (dideoxy) DNA sequencing
method. The data are shown below. What is the 5′ → 3′ sequence of the nucleotides in the original DNA
fragment?
Chapter 8230
Haplotype
A
B
C
D
Site 3
Present
Absent
Present
Absent
Site 2
Present
Present
Absent
Absent
dGTP
dCTP
dTTP
dATP
ddATP
dGTP
ddGTP
dCTP
dTTP
dATP
dGTP
dCTP
ddCTP
dTTP
dATP
dGTP
dCTP
dTTP
ddTTP
dATP
FMBC08 9/29/06 11:09 AM Page 230
Suggestions for further reading
Ausubel, F.M., Brent, R., Kingston, R.E., Moore, D.D., Seidman, J.G., Smith, J.A., Struhl, K., eds (2002) Short
Protocols in Molecular Biology, 5th edn. John Wiley & Sons, New York.
Echols, H. (2001) Operators and Promoters. The Story of Molecular Biology and Its Creators. University of California Press,
Berkeley, CA.
Gowers, D.M., Wilson, G.G., Halford, S.E. (2005) Measurement of the contributions of 1D and 3D pathways to the
translocation of a protein along DNA. Proceedings of the National Academy of Sciences USA 102:15883–15888.
Harrington, J.J., van Bokkelen, G., Mays, R.W., Gutashaw, K., Willard, H.F. (1997) Formation of de novo centromeres
and construction of first generation human artificial microchromosomes. Nature Genetics 125:345–355.
Katoh, M., Ayabe, F., Norikane, S. et al. (2004) Construction of a novel human artificial chromosome vector for gene
delivery. Biochemical and Biophysical Research Communications 321:280–290.
Kurpiewski, M.R., Engler, L.E., Wozniak, L.A., Kobylanska, A., Koziolkiewicz, M., Stec, W.J., Jen-Jacobsen, L.
(2004) Mechanisms of coupling between DNA recognition and specificity and catalysis in EcoRI endonuclease.
Structure 12:1775–1788.
Lipps, H.J., Jenke, A.C.W., Nehlsen, K., Scinteie, M.F., Stehle, I.M., Bode, J. (2003) Chromosome-based vectors for
gene therapy. Gene 304:23–33.
Love-Gregory, L.D., Dyer, J.A., Grasela, J., Hillman, R.E., Philips, C.L. (2001) Carrier detection and rapid newborn
diagnostic test for the common Y393N maple syrup urine disease allele by PCR-RFLP: culturally permissible testing
in the Mennonite community. Journal of Inherited and Metabolic Diseases 24:393–403.
Morrow, J.F., Cohen, S.N., Chang, A.C.Y., Boyer, H.W., Goodman, H.M., Helling, R.B. (1974) Replication and
transcription of eukaryotic DNA in Escherichia coli. Proceedings of the National Academy of Science USA 71:1743–1747.
Mullis, K.B. (1990) The unusual origin of the polymerase chain reaction. Scientific American 262:36–43.
Pingoud, A., Jeltsch, A. (2001) Structure and function of type II restriction endonucleases. Nucleic Acids Research
29:3705–3727.
Sambrook, J., Russell, D.W. (2001) Molecular Cloning: a Laboratory Manual, 3rd edn. Cold Spring Harbor Laboratory
Press, New York.
Viadiu, H., Aggarwal, A.K. (2000) Structure of BamHI bound to nonspecific DNA: a model for DNA sliding.
Molecular Cell 5:889–895.
Watson, J. (1993) The human genome initiative. In: Genetics and Society (eds B. Holland, C. Kyriacou), pp. 13–26.
Addison-Wesley Publishing Co., New York.
Recombinant DNA technology and molecular cloning 231
FMBC08 9/29/06 11:09 AM Page 231