PV191 Embedded systems seminar

Faculty of Informatics
Autumn 2024
Extent and Intensity
0/3/0. 3 credit(s) (plus extra credits for completion). Type of Completion: k (colloquium).
In-person direct teaching
Teacher(s)
doc. RNDr. Zdeněk Matěj, Ph.D. (lecturer)
prof. Ing. Václav Přenosil, CSc. (lecturer)
Ing. Jan Král, Ph.D. (lecturer)
Bc. Petr Kubica (seminar tutor)
Bc. Tomáš Rohlínek (seminar tutor)
RNDr. Aleš Jančář, Ph.D. (seminar tutor)
Guaranteed by
doc. RNDr. Zdeněk Matěj, Ph.D.
Department of Computer Systems and Communications – Faculty of Informatics
Contact Person: doc. RNDr. Zdeněk Matěj, Ph.D.
Supplier department: Department of Computer Systems and Communications – Faculty of Informatics
Timetable of Seminar Groups
PV191/AplikaceDS: Tue 24. 9. to Tue 17. 12. Tue 8:00–9:50 A415, A. Jančář, Z. Matěj
PV191/Digital_design: Tue 24. 9. to Tue 17. 12. Tue 10:00–11:50 A415, Z. Matěj
PV191/ESP32: Wed 25. 9. to Wed 18. 12. Wed 10:00–11:50 A415, P. Kubica, Z. Matěj, T. Rohlínek
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 36 fields of study the course is directly associated with, display
Course objectives
The course is suitable for students who are processing final theses. One is aimed at practical solutions to the particular problems of digital systems development. The aim is to gain practical experience and skills in the implementation and management of research and development activities related to the analysis, design, and implementation of specialized circuits, digital systems.
Learning outcomes
At the end of the course, students will be able to:
independent work in the design and implementation of the digital system
Syllabus
  • IrDA port design, market analysis
  • Data transmission using IrDA
  • Current RF technology data transmission, market analysis
  • Design of security device using RF data communication
  • Freescale digital barometer data processing with barometric pressure display
  • Touch graphical display control application
  • Position and altitude display using GPS module
  • MEMSIC accelerometer data filtration - inclinometer
  • Hitachi Compass module control, azimuth measurement
  • Humidity and temperature module data processing – display application
  • Distance measurement using ultrasonic rangefinder module with object counter using reflexive IR module
Literature
  • Qiug Li with Caroline Yao: Real Tme Concepts for Embeded Systems. CMP Books
  • 3. HDL - Chip Design, Douglas J. Smith, ISBN 0-9651934-3-8
Teaching methods
Individual or group project.
Assessment methods
The final examination rests on a defense of the design and implementation of the particular project.
Language of instruction
English
Further comments (probably available only in Czech)
Study Materials
The course is taught each semester.
Teacher's information
The course is focused on acquiring practical skills in the implementation of digital system components. Teaching will take place on technical and software equipment in the EmLab - A415.
The course is also listed under the following terms Spring 2008, Spring 2009, Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2014, Spring 2015, Spring 2016, Spring 2017, Spring 2018, Spring 2019, Spring 2020, Spring 2021, Spring 2022, Spring 2023, Spring 2024, Spring 2025.

PV191 Embedded systems seminar

Faculty of Informatics
Spring 2025
Extent and Intensity
0/3/0. 3 credit(s) (plus extra credits for completion). Type of Completion: k (colloquium).
In-person direct teaching
Teacher(s)
doc. RNDr. Zdeněk Matěj, Ph.D. (lecturer)
prof. Ing. Václav Přenosil, CSc. (seminar tutor)
Ing. Jan Král, Ph.D. (lecturer)
Guaranteed by
doc. RNDr. Zdeněk Matěj, Ph.D.
Department of Computer Systems and Communications – Faculty of Informatics
Contact Person: doc. RNDr. Zdeněk Matěj, Ph.D.
Supplier department: Department of Computer Systems and Communications – Faculty of Informatics
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 37 fields of study the course is directly associated with, display
Course objectives
The course is suitable for students who are processing final theses. One is aimed at practical solutions to the particular problems of digital systems development. The aim is to gain practical experience and skills in the implementation and management of research and development activities related to the analysis, design, and implementation of specialized circuits, digital systems.
Learning outcomes
At the end of the course, students will be able to:
independent work in the design and implementation of the digital system
Syllabus
  • IrDA port design, market analysis
  • Data transmission using IrDA
  • Current RF technology data transmission, market analysis
  • Design of security device using RF data communication
  • Freescale digital barometer data processing with barometric pressure display
  • Touch graphical display control application
  • Position and altitude display using GPS module
  • MEMSIC accelerometer data filtration - inclinometer
  • Hitachi Compass module control, azimuth measurement
  • Humidity and temperature module data processing – display application
  • Distance measurement using ultrasonic rangefinder module with object counter using reflexive IR module
Literature
  • Qiug Li with Caroline Yao: Real Tme Concepts for Embeded Systems. CMP Books
  • 3. HDL - Chip Design, Douglas J. Smith, ISBN 0-9651934-3-8
Teaching methods
Individual or group project.
Assessment methods
The final examination rests on a defense of the design and implementation of the particular project.
Language of instruction
English
Further comments (probably available only in Czech)
The course is taught each semester.
The course is taught: every week.
Teacher's information
The course is focused on acquiring practical skills in the implementation of digital system components. Teaching will take place on technical and software equipment in the EmLab - A415.
The course is also listed under the following terms Spring 2008, Spring 2009, Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2014, Spring 2015, Spring 2016, Spring 2017, Spring 2018, Spring 2019, Spring 2020, Spring 2021, Spring 2022, Spring 2023, Spring 2024, Autumn 2024.

PV191 Embedded systems seminar

Faculty of Informatics
Spring 2024
Extent and Intensity
0/3/0. 3 credit(s) (plus extra credits for completion). Type of Completion: k (colloquium).
Teacher(s)
doc. RNDr. Zdeněk Matěj, Ph.D. (lecturer)
prof. Ing. Václav Přenosil, CSc. (assistant)
Ing. Jan Král, Ph.D. (lecturer)
Guaranteed by
doc. RNDr. Zdeněk Matěj, Ph.D.
Department of Computer Systems and Communications – Faculty of Informatics
Contact Person: doc. RNDr. Zdeněk Matěj, Ph.D.
Supplier department: Department of Computer Systems and Communications – Faculty of Informatics
Timetable
Thu 12:00–13:50 A415
  • Timetable of Seminar Groups:
PV191/NXP: No timetable has been entered into IS. Z. Matěj
PV191/Silicon_chip: No timetable has been entered into IS. J. Král, Z. Matěj
PV191/HW_developing: No timetable has been entered into IS. Z. Matěj
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 70 fields of study the course is directly associated with, display
Course objectives
The course is suitable for students who are processing final theses. One is aimed at practical solutions to the particular problems of digital systems development. The aim is to gain practical experience and skills in the implementation and management of research and development activities related to the analysis, design, and implementation of specialized circuits, digital systems.
Learning outcomes
At the end of the course, students will be able to:
independent work in the design and implementation of the digital system
Syllabus
  • IrDA port design, market analysis
  • Data transmission using IrDA
  • Current RF technology data transmission, market analysis
  • Design of security device using RF data communication
  • Freescale digital barometer data processing with barometric pressure display
  • Touch graphical display control application
  • Position and altitude display using GPS module
  • MEMSIC accelerometer data filtration - inclinometer
  • Hitachi Compass module control, azimuth measurement
  • Humidity and temperature module data processing – display application
  • Distance measurement using ultrasonic rangefinder module with object counter using reflexive IR module
Literature
  • Qiug Li with Caroline Yao: Real Tme Concepts for Embeded Systems. CMP Books
  • 3. HDL - Chip Design, Douglas J. Smith, ISBN 0-9651934-3-8
Teaching methods
Individual or group project.
Assessment methods
The final examination rests on a defense of the design and implementation of the particular project.
Language of instruction
English
Further comments (probably available only in Czech)
Study Materials
The course is taught each semester.
Teacher's information
The course is focused on acquiring practical skills in the implementation of digital system components. Teaching will take place on technical and software equipment in the EmLab - A415.
The course is also listed under the following terms Spring 2008, Spring 2009, Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2014, Spring 2015, Spring 2016, Spring 2017, Spring 2018, Spring 2019, Spring 2020, Spring 2021, Spring 2022, Spring 2023, Autumn 2024, Spring 2025.

PV191 Seminar in Digital System Design

Faculty of Informatics
Spring 2023
Extent and Intensity
0/3. 3 credit(s) (plus extra credits for completion). Type of Completion: k (colloquium).
Teacher(s)
doc. RNDr. Zdeněk Matěj, Ph.D. (lecturer)
Ing. Jiří Čulen (seminar tutor)
Mgr. Oldřich Pecák (lecturer)
prof. Ing. Václav Přenosil, CSc. (lecturer)
Guaranteed by
doc. RNDr. Zdeněk Matěj, Ph.D.
Department of Computer Systems and Communications – Faculty of Informatics
Contact Person: doc. RNDr. Zdeněk Matěj, Ph.D.
Supplier department: Department of Computer Systems and Communications – Faculty of Informatics
Timetable
Tue 14. 2. to Tue 9. 5. Tue 8:00–9:50 A415
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 70 fields of study the course is directly associated with, display
Course objectives
The course is suitable for students who are processing final theses. One is aimed at practical solutions to the particular problems of digital systems development. The aim is to gain practical experience and skills in the implementation and management of research and development activities related to the analysis, design, and implementation of specialized circuits, digital systems.
Learning outcomes
At the end of the course, students will be able to:
independent work in the design and implementation of the digital system
Syllabus
  • IrDA port design, market analysis
  • Data transmission using IrDA
  • Current RF technology data transmission, market analysis
  • Design of security device using RF data communication
  • Freescale digital barometer data processing with barometric pressure display
  • Touch graphical display control application
  • Position and altitude display using GPS module
  • MEMSIC accelerometer data filtration - inclinometer
  • Hitachi Compass module control, azimuth measurement
  • Humidity and temperature module data processing – display application
  • Distance measurement using ultrasonic rangefinder module with object counter using reflexive IR module
Literature
  • Qiug Li with Caroline Yao: Real Tme Concepts for Embeded Systems. CMP Books
  • 3. HDL - Chip Design, Douglas J. Smith, ISBN 0-9651934-3-8
Teaching methods
Individual or group project.
Assessment methods
The final examination rests on a defense of the design and implementation of the particular project.
Language of instruction
English
Further comments (probably available only in Czech)
Study Materials
The course is taught annually.
Teacher's information
The course is focused on acquiring practical skills in the implementation of digital system components. Teaching will take place on technical and software equipment in the EmLab - A415.
The course is also listed under the following terms Spring 2008, Spring 2009, Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2014, Spring 2015, Spring 2016, Spring 2017, Spring 2018, Spring 2019, Spring 2020, Spring 2021, Spring 2022, Spring 2024, Autumn 2024, Spring 2025.

PV191 Project from Designing Digital Systems

Faculty of Informatics
Spring 2022
Extent and Intensity
0/3. 3 credit(s) (plus extra credits for completion). Type of Completion: k (colloquium).
Teacher(s)
doc. RNDr. Zdeněk Matěj, Ph.D. (lecturer)
Ing. Jiří Čulen (seminar tutor)
prof. Ing. Václav Přenosil, CSc. (lecturer)
Guaranteed by
doc. RNDr. Zdeněk Matěj, Ph.D.
Department of Computer Systems and Communications – Faculty of Informatics
Contact Person: doc. RNDr. Zdeněk Matěj, Ph.D.
Supplier department: Department of Computer Systems and Communications – Faculty of Informatics
Timetable
Tue 15. 2. to Tue 10. 5. Tue 14:00–15:50 A415
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 70 fields of study the course is directly associated with, display
Course objectives
The course is suitable for students who are processing final theses. One is aimed at practical solutions to the particular problems of digital systems development. The aim is to gain practical experience and skills in the implementation and management of research and development activities related to the analysis, design, and implementation of specialized circuits, digital systems.
Learning outcomes
At the end of the course, students will be able to:
independent work in the design and implementation of the digital system
Syllabus
  • IrDA port design, market analysis
  • Data transmission using IrDA
  • Current RF technology data transmission, market analysis
  • Design of security device using RF data communication
  • Freescale digital barometer data processing with barometric pressure display
  • Touch graphical display control application
  • Position and altitude display using GPS module
  • MEMSIC accelerometer data filtration - inclinometer
  • Hitachi Compass module control, azimuth measurement
  • Humidity and temperature module data processing – display application
  • Distance measurement using ultrasonic rangefinder module with object counter using reflexive IR module
Literature
  • Qiug Li with Caroline Yao: Real Tme Concepts for Embeded Systems. CMP Books
  • 3. HDL - Chip Design, Douglas J. Smith, ISBN 0-9651934-3-8
Teaching methods
Individual or group project.
Assessment methods
The final examination rests on a defense of the design and implementation of the particular project.
Language of instruction
English
Further comments (probably available only in Czech)
Study Materials
The course is taught annually.
Teacher's information
The course is focused on acquiring practical skills in the implementation of digital system components. Teaching will take place on technical and software equipment in the EmLab - A415.
The course is also listed under the following terms Spring 2008, Spring 2009, Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2014, Spring 2015, Spring 2016, Spring 2017, Spring 2018, Spring 2019, Spring 2020, Spring 2021, Spring 2023, Spring 2024, Autumn 2024, Spring 2025.

PV191 Project from Designing Digital Systems

Faculty of Informatics
Spring 2021
Extent and Intensity
0/3. 3 credit(s) (plus extra credits for completion). Type of Completion: k (colloquium).
Teacher(s)
doc. RNDr. Zdeněk Matěj, Ph.D. (lecturer)
prof. Ing. Václav Přenosil, CSc. (lecturer)
Ing. Jiří Čulen (seminar tutor)
Guaranteed by
doc. RNDr. Zdeněk Matěj, Ph.D.
Department of Computer Systems and Communications – Faculty of Informatics
Contact Person: doc. RNDr. Zdeněk Matěj, Ph.D.
Supplier department: Department of Computer Systems and Communications – Faculty of Informatics
Timetable
Mon 14:00–15:50 A415
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 70 fields of study the course is directly associated with, display
Course objectives
The course is suitable for students who are processing final theses. One is aimed at practical solutions to the particular problems of digital systems development. The aim is to gain practical experience and skills in the implementation and management of research and development activities related to the analysis, design, and implementation of specialized circuits, digital systems.
Learning outcomes
At the end of the course, students will be able to:
independent work in the design and implementation of the digital system
Syllabus
  • IrDA port design, market analysis
  • Data transmission using IrDA
  • Current RF technology data transmission, market analysis
  • Design of security device using RF data communication
  • Freescale digital barometer data processing with barometric pressure display
  • Touch graphical display control application
  • Position and altitude display using GPS module
  • MEMSIC accelerometer data filtration - inclinometer
  • Hitachi Compass module control, azimuth measurement
  • Humidity and temperature module data processing – display application
  • Distance measurement using ultrasonic rangefinder module with object counter using reflexive IR module
Literature
  • 3. HDL - Chip Design, Douglas J. Smith, ISBN 0-9651934-3-8
  • Qiug Li with Caroline Yao: Real Tme Concepts for Embeded Systems. CMP Books
Teaching methods
Individual or group project.
Assessment methods
The final examination rests on a defense of the design and implementation of the particular project.
Language of instruction
English
Further comments (probably available only in Czech)
Study Materials
The course is taught annually.
Teacher's information
The course is focused on acquiring practical skills in the implementation of digital system components. Teaching will take place on technical and software equipment in the EmLab - A415.
The course is also listed under the following terms Spring 2008, Spring 2009, Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2014, Spring 2015, Spring 2016, Spring 2017, Spring 2018, Spring 2019, Spring 2020, Spring 2022, Spring 2023, Spring 2024, Autumn 2024, Spring 2025.

PV191 Project from Designing Digital Systems

Faculty of Informatics
Spring 2020
Extent and Intensity
0/3. 3 credit(s) (plus extra credits for completion). Type of Completion: k (colloquium).
Teacher(s)
doc. RNDr. Zdeněk Matěj, Ph.D. (lecturer)
RNDr. Martin Veškrna (lecturer)
Mgr. Filip Roth (seminar tutor)
Ahmad Abbadi, Ph.D. (alternate examiner)
Guaranteed by
doc. RNDr. Zdeněk Matěj, Ph.D.
Department of Computer Systems and Communications – Faculty of Informatics
Contact Person: doc. RNDr. Zdeněk Matěj, Ph.D.
Supplier department: Department of Computer Systems and Communications – Faculty of Informatics
Timetable
Mon 17. 2. to Fri 15. 5. Fri 10:00–11:50 A415
Prerequisites
A prerequisite is a completion of courses PA174-Design of the Digital Systems-II and PA176-Architecture of the Digital Systems-II or PV170-Konstrukce číslicových systémů and PV172-Architektura číslicových systémů.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 70 fields of study the course is directly associated with, display
Course objectives
The course is suitable for students who are processing final theses. One is aimed at practical solutions of the particular problems of digital systems development. The aim is to gain practical experience and skills in implementation and management of research and development activities related to the analysis, design, and implementation of specialized circuits, digital system.
Learning outcomes
At the end of the course, students will be able to:
independent work in the design and implementation of the digital system
Syllabus
  • IRDa port design, market analysis
  • Data transmission using IRDa
  • Current RF technology data transmission, market analysis
  • Design of security device using RF data communication
  • Freescale digital barometer data processing with barometric pressure display
  • Touch graphical display control application
  • Position and altitude display using GPS module
  • MEMSIC accelerometer data filtration - inclinometer
  • Hitachi Compass module control, azimuth measurement
  • Humidity and temperature module data processing – display application
  • Distance measurement using ultrasonic rangefinder module with object counter using reflexive IR module
Literature
  • 3. HDL - Chip Design, Douglas J. Smith, ISBN 0-9651934-3-8
  • Qiug Li with Caroline Yao: Real Tme Concepts for Embeded Systems. CMP Books
Teaching methods
Individual or group project.
Assessment methods
Final examination rests on a defense of the design and implementation of the particular project.
Language of instruction
English
Further comments (probably available only in Czech)
Study Materials
The course is taught annually.
The course is also listed under the following terms Spring 2008, Spring 2009, Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2014, Spring 2015, Spring 2016, Spring 2017, Spring 2018, Spring 2019, Spring 2021, Spring 2022, Spring 2023, Spring 2024, Autumn 2024, Spring 2025.

PV191 Project of Designing Digital Systems

Faculty of Informatics
Spring 2019
Extent and Intensity
0/3. 3 credit(s) (plus extra credits for completion). Type of Completion: k (colloquium).
Teacher(s)
doc. RNDr. Zdeněk Matěj, Ph.D. (lecturer)
RNDr. Ondřej Herman (lecturer)
prof. Ing. Václav Přenosil, CSc. (lecturer)
Guaranteed by
doc. RNDr. Aleš Horák, Ph.D.
Department of Machine Learning and Data Processing – Faculty of Informatics
Contact Person: doc. RNDr. Zdeněk Matěj, Ph.D.
Supplier department: Department of Machine Learning and Data Processing – Faculty of Informatics
Timetable
Tue 19. 2. to Tue 14. 5. Tue 10:00–11:50 A415
Prerequisites
A prerequisite is completion of courses PA174-Design of the Digital Systems-II and PA176-Architecture of the Digital Systems-II or PV170-Konstrukce číslicových systémů and PV172-Architektura číslicových systémů.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 33 fields of study the course is directly associated with, display
Course objectives
The course is suitable for students who are processing final theses. One is aimed on practical solutions of the particular problems of digital systems development. The aim is to gain practical experience and skills in implementation and management of research and development activities related to the analysis, design and implementation of specialized circuits, digital system.
Learning outcomes
At the end of the course, students will be able to:
independent work in the design and implementation of the digital system
Syllabus
  • IRDa port design, market analysis
  • Data transmission using IRDa
  • Current RF technology data transmission, market analysis
  • Design of security device using RF data communication
  • Freescale digital barometer data processing with barometric pressure display
  • Touch graphical display control application
  • Position and altitude display using GPS module
  • MEMSIC accelerometer data filtration - inclinometer
  • Hitachi Compass module control, azimuth measurement
  • Humidity and temperature module data processing – display application
  • Distance measurement using ultrasonic rangefinder module with object counter using reflexive IR module
Literature
  • Qiug Li with Caroline Yao: Real Tme Concepts for Embeded Systems. CMP Books
  • 3. HDL - Chip Design, Douglas J. Smith, ISBN 0-9651934-3-8
Teaching methods
Individual or group project.
Assessment methods
Final examination rests on defense of the design and implementation of particular project.
Language of instruction
Czech
Further comments (probably available only in Czech)
Study Materials
The course is taught annually.
Teacher's information
The course is focused on acquiring practical skills in the implementation of digital system components. Teaching will take place on technical and software equipment in the Laboratory of Architecture and Design of Digital Systems.
The course is also listed under the following terms Spring 2008, Spring 2009, Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2014, Spring 2015, Spring 2016, Spring 2017, Spring 2018, Spring 2020, Spring 2021, Spring 2022, Spring 2023, Spring 2024, Autumn 2024, Spring 2025.

PV191 Project of Designing Digital Systems

Faculty of Informatics
Spring 2018
Extent and Intensity
0/3. 3 credit(s) (plus extra credits for completion). Type of Completion: k (colloquium).
Teacher(s)
doc. RNDr. Zdeněk Matěj, Ph.D. (lecturer)
prof. Ing. Václav Přenosil, CSc. (lecturer)
Ing. Zbyněk Bureš, Ph.D. (lecturer)
Guaranteed by
doc. RNDr. Aleš Horák, Ph.D.
Department of Machine Learning and Data Processing – Faculty of Informatics
Contact Person: doc. RNDr. Zdeněk Matěj, Ph.D.
Supplier department: Department of Machine Learning and Data Processing – Faculty of Informatics
Timetable
Thu 10:00–11:50 A415
Prerequisites
A prerequisite is completion of courses PA174-Design of the Digital Systems-II and PA176-Architecture of the Digital Systems-II or PV170-Konstrukce číslicových systémů and PV172-Architektura číslicových systémů.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 33 fields of study the course is directly associated with, display
Course objectives
The course is suitable for students who are processing final theses. One is aimed on practical solutions of the particular problems of digital systems development. The aim is to gain practical experience and skills in implementation and management of research and development activities related to the analysis, design and implementation of specialized circuits, digital system.
Learning outcomes
At the end of the course, students will be able to:
independent work in the design and implementation of the digital system
Syllabus
  • IRDa port design, market analysis
  • Data transmission using IRDa
  • Current RF technology data transmission, market analysis
  • Design of security device using RF data communication
  • Freescale digital barometer data processing with barometric pressure display
  • Touch graphical display control application
  • Position and altitude display using GPS module
  • MEMSIC accelerometer data filtration - inclinometer
  • Hitachi Compass module control, azimuth measurement
  • Humidity and temperature module data processing – display application
  • Distance measurement using ultrasonic rangefinder module with object counter using reflexive IR module
Literature
  • Qiug Li with Caroline Yao: Real Tme Concepts for Embeded Systems. CMP Books
  • 3. HDL - Chip Design, Douglas J. Smith, ISBN 0-9651934-3-8
Teaching methods
Individual or group project.
Assessment methods
Final examination rests on defense of the design and implementation of particular project.
Language of instruction
Czech
Further comments (probably available only in Czech)
Study Materials
The course is taught annually.
The course is also listed under the following terms Spring 2008, Spring 2009, Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2014, Spring 2015, Spring 2016, Spring 2017, Spring 2019, Spring 2020, Spring 2021, Spring 2022, Spring 2023, Spring 2024, Autumn 2024, Spring 2025.

PV191 Project of Designing Digital Systems

Faculty of Informatics
Spring 2017
Extent and Intensity
0/3. 3 credit(s) (plus extra credits for completion). Type of Completion: k (colloquium).
Teacher(s)
doc. RNDr. Zdeněk Matěj, Ph.D. (lecturer)
RNDr. Ondřej Herman (seminar tutor)
Mgr. Filip Roth (seminar tutor)
Ahmad Abbadi, Ph.D. (alternate examiner)
Guaranteed by
doc. RNDr. Aleš Horák, Ph.D.
Department of Machine Learning and Data Processing – Faculty of Informatics
Contact Person: doc. RNDr. Zdeněk Matěj, Ph.D.
Supplier department: Department of Machine Learning and Data Processing – Faculty of Informatics
Timetable
Tue 8:00–9:50 A415
Prerequisites
A prerequisite is completion of courses PA174-Design of the Digital Systems-II and PA176-Architecture of the Digital Systems-II or PV170-Konstrukce číslicových systémů and PV172-Architektura číslicových systémů.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 33 fields of study the course is directly associated with, display
Course objectives
The course is suitable for students who are processing final theses. One is aimed on practical solutions of the particular problems of digital systems development. The aim is to gain practical experience and skills in implementation and management of research and development activities related to the analysis, design and implementation of specialized circuits, digital system.
Syllabus
  • IRDa port design, market analysis
  • Data transmission using IRDa
  • Current RF technology data transmission, market analysis
  • Design of security device using RF data communication
  • Freescale digital barometer data processing with barometric pressure display
  • Touch graphical display control application
  • Position and altitude display using GPS module
  • MEMSIC accelerometer data filtration - inclinometer
  • Hitachi Compass module control, azimuth measurement
  • Humidity and temperature module data processing – display application
  • Distance measurement using ultrasonic rangefinder module with object counter using reflexive IR module
Literature
  • 3. HDL - Chip Design, Douglas J. Smith, ISBN 0-9651934-3-8
  • Qiug Li with Caroline Yao: Real Tme Concepts for Embeded Systems. CMP Books
Teaching methods
Individual or group project.
Assessment methods
Final examination rests on defense of the design and implementation of particular project.
Language of instruction
Czech
Further comments (probably available only in Czech)
Study Materials
The course is taught annually.
The course is also listed under the following terms Spring 2008, Spring 2009, Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2014, Spring 2015, Spring 2016, Spring 2018, Spring 2019, Spring 2020, Spring 2021, Spring 2022, Spring 2023, Spring 2024, Autumn 2024, Spring 2025.

PV191 Project of Designing Digital Systems

Faculty of Informatics
Spring 2016
Extent and Intensity
0/3. 3 credit(s) (plus extra credits for completion). Type of Completion: k (colloquium).
Teacher(s)
doc. RNDr. Zdeněk Matěj, Ph.D. (lecturer)
RNDr. Martin Veškrna (lecturer)
Mgr. Filip Roth (seminar tutor)
Ahmad Abbadi, Ph.D. (alternate examiner)
Guaranteed by
doc. RNDr. Aleš Horák, Ph.D.
Department of Machine Learning and Data Processing – Faculty of Informatics
Contact Person: doc. RNDr. Zdeněk Matěj, Ph.D.
Supplier department: Department of Machine Learning and Data Processing – Faculty of Informatics
Timetable
Wed 16:00–17:50 A415
Prerequisites
( PA174 Design of Digital Systems II && PA176 Architecture of Digit. Syst.II )||( PV170 Design of Digital Systems && PV172 Architecture of Digit. Systems )||( PV170 Design of Digital Systems && PA176 Architecture of Digit. Syst.II )||( PA174 Design of Digital Systems II && PV172 Architecture of Digit. Systems )
A prerequisite is completion of courses PA174-Design of the Digital Systems-II and PA176-Architecture of the Digital Systems-II or PV170-Konstrukce číslicových systémů and PV172-Architektura číslicových systémů.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 33 fields of study the course is directly associated with, display
Course objectives
The course is suitable for students who are processing final theses. One is aimed on practical solutions of the particular problems of digital systems development. The aim is to gain practical experience and skills in implementation and management of research and development activities related to the analysis, design and implementation of specialized circuits, digital system.
Syllabus
  • IRDa port design, market analysis
  • Data transmission using IRDa
  • Current RF technology data transmission, market analysis
  • Design of security device using RF data communication
  • Freescale digital barometer data processing with barometric pressure display
  • Touch graphical display control application
  • Position and altitude display using GPS module
  • MEMSIC accelerometer data filtration - inclinometer
  • Hitachi Compass module control, azimuth measurement
  • Humidity and temperature module data processing – display application
  • Distance measurement using ultrasonic rangefinder module with object counter using reflexive IR module
Literature
  • 3. HDL - Chip Design, Douglas J. Smith, ISBN 0-9651934-3-8
  • Qiug Li with Caroline Yao: Real Tme Concepts for Embeded Systems. CMP Books
Teaching methods
Individual or group project.
Assessment methods
Final examination rests on defense of the design and implementation of particular project.
Language of instruction
Czech
Further comments (probably available only in Czech)
Study Materials
The course is taught annually.
The course is also listed under the following terms Spring 2008, Spring 2009, Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2014, Spring 2015, Spring 2017, Spring 2018, Spring 2019, Spring 2020, Spring 2021, Spring 2022, Spring 2023, Spring 2024, Autumn 2024, Spring 2025.

PV191 Project of Designing Digital Systems

Faculty of Informatics
Spring 2015
Extent and Intensity
0/3. 3 credit(s) (plus extra credits for completion). Type of Completion: k (colloquium).
Teacher(s)
doc. RNDr. Zdeněk Matěj, Ph.D. (lecturer)
Ing. Zbyněk Bureš, Ph.D. (lecturer)
Mgr. Filip Roth (seminar tutor)
prof. Ing. Václav Přenosil, CSc. (lecturer)
Guaranteed by
doc. RNDr. Aleš Horák, Ph.D.
Department of Machine Learning and Data Processing – Faculty of Informatics
Supplier department: Department of Machine Learning and Data Processing – Faculty of Informatics
Timetable
Thu 10:00–11:50 A415
Prerequisites
( PA174 Design of Digital Systems II && PA176 Architecture of Digit. Syst.II )||( PV170 Design of Digital Systems && PV172 Architecture of Digit. Systems )||( PV170 Design of Digital Systems && PA176 Architecture of Digit. Syst.II )||( PA174 Design of Digital Systems II && PV172 Architecture of Digit. Systems )
A prerequisite is completion of courses PA174-Design of the Digital Systems-II and PA176-Architecture of the Digital Systems-II or PV170-Konstrukce číslicových systémů and PV172-Architektura číslicových systémů.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 32 fields of study the course is directly associated with, display
Course objectives
The course is suitable for students who are processing final theses. One is aimed on practical solutions of the particular problems of digital systems development. The aim is to gain practical experience and skills in implementation and management of research and development activities related to the analysis, design and implementation of specialized circuits, digital system.
Syllabus
  • IRDa port design, market analysis
  • Data transmission using IRDa
  • Current RF technology data transmission, market analysis
  • Design of security device using RF data communication
  • Freescale digital barometer data processing with barometric pressure display
  • Touch graphical display control application
  • Position and altitude display using GPS module
  • MEMSIC accelerometer data filtration - inclinometer
  • Hitachi Compass module control, azimuth measurement
  • Humidity and temperature module data processing – display application
  • Distance measurement using ultrasonic rangefinder module with object counter using reflexive IR module
Literature
  • 3. HDL - Chip Design, Douglas J. Smith, ISBN 0-9651934-3-8
  • Qiug Li with Caroline Yao: Real Tme Concepts for Embeded Systems. CMP Books
Teaching methods
Individual or group project.
Assessment methods
Final examination rests on defense of the design and implementation of particular project.
Language of instruction
Czech
Further comments (probably available only in Czech)
Study Materials
The course is taught annually.
The course is also listed under the following terms Spring 2008, Spring 2009, Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2014, Spring 2016, Spring 2017, Spring 2018, Spring 2019, Spring 2020, Spring 2021, Spring 2022, Spring 2023, Spring 2024, Autumn 2024, Spring 2025.

PV191 Project of Designing Digital Systems

Faculty of Informatics
Spring 2014
Extent and Intensity
0/3. 3 credit(s) (plus extra credits for completion). Type of Completion: k (colloquium).
Teacher(s)
doc. RNDr. Zdeněk Matěj, Ph.D. (lecturer)
Ing. Zbyněk Bureš, Ph.D. (lecturer)
Mgr. Filip Roth (seminar tutor)
prof. Ing. Václav Přenosil, CSc. (lecturer)
Guaranteed by
prof. Ing. Václav Přenosil, CSc.
Department of Machine Learning and Data Processing – Faculty of Informatics
Supplier department: Department of Machine Learning and Data Processing – Faculty of Informatics
Timetable
Mon 12:00–13:50 B202
Prerequisites
( PA174 Design of Digital Systems II && PA176 Architecture of Digit. Syst.II )||( PV170 Design of Digital Systems && PV172 Architecture of Digit. Systems )||( PV170 Design of Digital Systems && PA176 Architecture of Digit. Syst.II )||( PA174 Design of Digital Systems II && PV172 Architecture of Digit. Systems )
A prerequisite is completion of courses PA174-Design of the Digital Systems-II and PA176-Architecture of the Digital Systems-II or PV170-Konstrukce číslicových systémů and PV172-Architektura číslicových systémů.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 32 fields of study the course is directly associated with, display
Course objectives
The course is suitable for students who are processing final theses. One is aimed on practical solutions of the particular problems of digital systems development. The aim is to gain practical experience and skills in implementation and management of research and development activities related to the analysis, design and implementation of specialized circuits, digital system.
Syllabus
  • IRDa port design, market analysis
  • Data transmission using IRDa
  • Current RF technology data transmission, market analysis
  • Design of security device using RF data communication
  • Freescale digital barometer data processing with barometric pressure display
  • Touch graphical display control application
  • Position and altitude display using GPS module
  • MEMSIC accelerometer data filtration - inclinometer
  • Hitachi Compass module control, azimuth measurement
  • Humidity and temperature module data processing – display application
  • Distance measurement using ultrasonic rangefinder module with object counter using reflexive IR module
Literature
  • Qiug Li with Caroline Yao: Real Tme Concepts for Embeded Systems. CMP Books
  • 3. HDL - Chip Design, Douglas J. Smith, ISBN 0-9651934-3-8
Teaching methods
Individual or group project.
Assessment methods
Final examination rests on defense of the design and implementation of particular project.
Language of instruction
Czech
Further comments (probably available only in Czech)
The course is taught annually.
The course is also listed under the following terms Spring 2008, Spring 2009, Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2015, Spring 2016, Spring 2017, Spring 2018, Spring 2019, Spring 2020, Spring 2021, Spring 2022, Spring 2023, Spring 2024, Autumn 2024, Spring 2025.

PV191 Project of Designing Digital Systems

Faculty of Informatics
Spring 2013
Extent and Intensity
0/3. 3 credit(s) (plus extra credits for completion). Type of Completion: k (colloquium).
Teacher(s)
doc. RNDr. Zdeněk Matěj, Ph.D. (lecturer)
RNDr. Radek Krejčí (lecturer)
Ing. Zbyněk Bureš, Ph.D. (lecturer)
prof. Ing. Václav Přenosil, CSc. (lecturer)
Guaranteed by
prof. Ing. Václav Přenosil, CSc.
Department of Machine Learning and Data Processing – Faculty of Informatics
Supplier department: Department of Machine Learning and Data Processing – Faculty of Informatics
Timetable
Thu 10:00–11:50 B202
Prerequisites
( PA174 Design of Digital Systems II && PA176 Architecture of Digit. Syst.II )||( PV170 Design of Digital Systems && PV172 Architecture of Digit. Systems )||( PV170 Design of Digital Systems && PA176 Architecture of Digit. Syst.II )||( PA174 Design of Digital Systems II && PV172 Architecture of Digit. Systems )
A prerequisite is completion of courses PA174-Design of the Digital Systems-II and PA176-Architecture of the Digital Systems-II or PV170-Konstrukce číslicových systémů and PV172-Architektura číslicových systémů.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 32 fields of study the course is directly associated with, display
Course objectives
The course is suitable for students who are processing final theses. One is aimed on practical solutions of the particular problems of digital systems development. The aim is to gain practical experience and skills in implementation and management of research and development activities related to the analysis, design and implementation of specialized circuits, digital system.
Syllabus
  • IRDa port design, market analysis
  • Data transmission using IRDa
  • Current RF technology data transmission, market analysis
  • Design of security device using RF data communication
  • Freescale digital barometer data processing with barometric pressure display
  • Touch graphical display control application
  • Position and altitude display using GPS module
  • MEMSIC accelerometer data filtration - inclinometer
  • Hitachi Compass module control, azimuth measurement
  • Humidity and temperature module data processing – display application
  • Distance measurement using ultrasonic rangefinder module with object counter using reflexive IR module
Literature
  • 3. HDL - Chip Design, Douglas J. Smith, ISBN 0-9651934-3-8
  • Qiug Li with Caroline Yao: Real Tme Concepts for Embeded Systems. CMP Books
Teaching methods
Individual or group project.
Assessment methods
Final examination rests on defense of the design and implementation of particular project.
Language of instruction
Czech
Further comments (probably available only in Czech)
The course is taught annually.
The course is also listed under the following terms Spring 2008, Spring 2009, Spring 2010, Spring 2011, Spring 2012, Spring 2014, Spring 2015, Spring 2016, Spring 2017, Spring 2018, Spring 2019, Spring 2020, Spring 2021, Spring 2022, Spring 2023, Spring 2024, Autumn 2024, Spring 2025.

PV191 Project of Designing Digital Systems

Faculty of Informatics
Spring 2012
Extent and Intensity
0/3. 3 credit(s) (plus extra credits for completion). Type of Completion: k (colloquium).
Teacher(s)
prof. Ing. Václav Přenosil, CSc. (alternate examiner)
doc. RNDr. Zdeněk Matěj, Ph.D. (lecturer)
Mgr. Martin Elich (lecturer)
Guaranteed by
prof. Ing. Václav Přenosil, CSc.
Department of Machine Learning and Data Processing – Faculty of Informatics
Supplier department: Department of Machine Learning and Data Processing – Faculty of Informatics
Timetable
Tue 16:00–17:50 B202
Prerequisites
( PA174 Design of Digital Systems II && PA176 Architecture of Digit. Syst.II )||( PV170 Design of Digital Systems && PV172 Architecture of Digit. Systems )||( PV170 Design of Digital Systems && PA176 Architecture of Digit. Syst.II )||( PA174 Design of Digital Systems II && PV172 Architecture of Digit. Systems )
A prerequisite is completion of courses PA174-Design of the Digital Systems-II and PA176-Architecture of the Digital Systems-II or PV170-Konstrukce číslicových systémů and PV172-Architektura číslicových systémů.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 32 fields of study the course is directly associated with, display
Course objectives
The course is suitable for students who is processing final theses. One is aimed on practical solutions of the particular problems of digital systems development. The aim is to gain practical experience and skills in implementation and management of research and development activities related to the analysis, design and implementation of specialized circuits, digital system.
Syllabus
  • IRDa port design, market analysis
  • Data transmission using IRDa
  • Current RF technology data transmission, market analysis
  • Design of security device using RF data communication
  • Freescale digital barometer data processing with barometric pressure display
  • Touch graphical display control application
  • Position and altitude display using GPS module
  • MEMSIC acceleloremeter data filtration - inclinometer
  • Hitachi Compass module control, azimuth measurement
  • Humidity and temperature module data processing – display application
  • Distane measurement using ultrasonic rangefinder module with object counter using reflexive IR module
Literature
  • Qiug Li with Caroline Yao: Real Tme Concepts for Embeded Systems. CMP Books
  • 3. HDL - Chip Design, Douglas J. Smith, ISBN 0-9651934-3-8
Teaching methods
Individual or group project.
Assessment methods
Final examination rests on defence of the design and implementation of particular project.
Language of instruction
Czech
Further comments (probably available only in Czech)
The course is taught annually.
The course is also listed under the following terms Spring 2008, Spring 2009, Spring 2010, Spring 2011, Spring 2013, Spring 2014, Spring 2015, Spring 2016, Spring 2017, Spring 2018, Spring 2019, Spring 2020, Spring 2021, Spring 2022, Spring 2023, Spring 2024, Autumn 2024, Spring 2025.

PV191 Project of Designing Digital Systems

Faculty of Informatics
Spring 2011
Extent and Intensity
0/3. 3 credit(s) (plus extra credits for completion). Type of Completion: k (colloquium).
Teacher(s)
prof. Ing. Václav Přenosil, CSc. (lecturer)
Mgr. Šimon Řeřucha, Ph.D. (lecturer)
Guaranteed by
prof. Ing. Václav Přenosil, CSc.
Department of Machine Learning and Data Processing – Faculty of Informatics
Timetable
Wed 10:00–11:50 B202
Prerequisites
( PA174 Design of Digital Systems II && PA176 Architecture of Digit. Syst.II )||( PV170 Design of Digital Systems && PV172 Architecture of Digit. Systems )
A prerequisite is completion of courses PA174-Design of the Digital Systems-II and PA176-Architecture of the Digital Systems-II or PV170-Konstrukce číslicových systémů and PV172-Architektura číslicových systémů.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 35 fields of study the course is directly associated with, display
Course objectives
The course is suitable for students who is processing final theses. One is aimed on practical solutions of the particular problems of digital systems development. The aim is to gain practical experience and skills in implementation and management of research and development activities related to the analysis, design and implementation of specialized circuits, digital system.
Syllabus
  • IRDa port design, market analysis
  • Data transmission using IRDa
  • Current RF technology data transmission, market analysis
  • Design of security device using RF data communication
  • Freescale digital barometer data processing with barometric pressure display
  • Touch graphical display control application
  • Position and altitude display using GPS module
  • MEMSIC acceleloremeter data filtration - inclinometer
  • Hitachi Compass module control, azimuth measurement
  • Humidity and temperature module data processing – display application
  • Distane measurement using ultrasonic rangefinder module with object counter using reflexive IR module
Literature
  • 3. HDL - Chip Design, Douglas J. Smith, ISBN 0-9651934-3-8
  • Qiug Li with Caroline Yao: Real Tme Concepts for Embeded Systems. CMP Books
Teaching methods
Individual or group project.
Assessment methods
Final examination rests on defence of the design and implementation of particular project.
Language of instruction
Czech
Further comments (probably available only in Czech)
Study Materials
The course is taught annually.
The course is also listed under the following terms Spring 2008, Spring 2009, Spring 2010, Spring 2012, Spring 2013, Spring 2014, Spring 2015, Spring 2016, Spring 2017, Spring 2018, Spring 2019, Spring 2020, Spring 2021, Spring 2022, Spring 2023, Spring 2024, Autumn 2024, Spring 2025.

PV191 Project of Designing Digital Systems

Faculty of Informatics
Spring 2010
Extent and Intensity
0/3. 3 credit(s) (plus extra credits for completion). Type of Completion: k (colloquium).
Teacher(s)
prof. Ing. Václav Přenosil, CSc. (lecturer)
Mgr. Šimon Řeřucha, Ph.D. (lecturer)
Guaranteed by
prof. Ing. Václav Přenosil, CSc.
Department of Machine Learning and Data Processing – Faculty of Informatics
Timetable
Wed 10:00–11:50 B202
Prerequisites
Courses PA174 - Design of Digital Systems II, PA176 - Digital Systems Architecture II, PA175 - Digital Systems Diagnostics II.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 36 fields of study the course is directly associated with, display
Course objectives
The course is aimed at solving of the particular problems on the field of digital systems design. Main goal of this course is to acquire the skills in the administration and execution of the analysis, design and implementation of the digital subsystems and specialized circuits.
Syllabus
  • Project assignment
  • Task analysis.
  • Proposal of solutions.
  • Selection of proper design method.
  • Choice of the implementation technology;
  • Design modelling and simulation.
  • Debugging.
  • Design implementation.
Literature
  • Qiug Li with Caroline Yao: Real Tme Concepts for Embeded Systems. CMP Books
  • 3. HDL - Chip Design, Douglas J. Smith, ISBN 0-9651934-3-8
Teaching methods
Individual or group project.
Assessment methods
Final examination rests on defence of the design and implementation of particular project.
Language of instruction
Czech
Further comments (probably available only in Czech)
Study Materials
The course is taught annually.
The course is also listed under the following terms Spring 2008, Spring 2009, Spring 2011, Spring 2012, Spring 2013, Spring 2014, Spring 2015, Spring 2016, Spring 2017, Spring 2018, Spring 2019, Spring 2020, Spring 2021, Spring 2022, Spring 2023, Spring 2024, Autumn 2024, Spring 2025.

PV191 Project of Designing Digital Computer

Faculty of Informatics
Spring 2009
Extent and Intensity
2/2. 4 credit(s) (plus extra credits for completion). Type of Completion: zk (examination).
Teacher(s)
prof. Ing. Václav Přenosil, CSc. (lecturer)
Guaranteed by
prof. Ing. Václav Přenosil, CSc.
Department of Machine Learning and Data Processing – Faculty of Informatics
Prerequisites
Courses PA174 - Design of Digital Computersis II, PA176 - Digital Computers Architecture II, PA175 - Computer Diagnostics II and PB161 - C++ Programming are advisable source of necessary knowledges for current course.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 37 fields of study the course is directly associated with, display
Course objectives
The course is specialized in solving of the particular problem from design of the digital systems. Main aim of this course is acquire habitudes and skills in the administration and execution of the analysis, design and implementation of the digital subsystems and particular circuits.
Syllabus
  • Submission of the project;
  • analyse of the task;
  • proposal of the solving;
  • choice of the design method;
  • choice of the implementation technology;
  • modelling and simulation of the design;
  • debugging of the design;
  • implementation of the design.
Literature
  • Qiug Li with Caroline Yao: Real Tme Concepts for Embeded Systems. CMP Books
  • 3. HDL - Chip Design, Douglas J. Smith, ISBN 0-9651934-3-8
Assessment methods
Final examination rest on defence of the design and implementation of the concrete project.
Language of instruction
Czech
Further comments (probably available only in Czech)
The course is taught annually.
The course is taught: every week.
The course is also listed under the following terms Spring 2008, Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2014, Spring 2015, Spring 2016, Spring 2017, Spring 2018, Spring 2019, Spring 2020, Spring 2021, Spring 2022, Spring 2023, Spring 2024, Autumn 2024, Spring 2025.

PV191 Project of Designing Digital Computer

Faculty of Informatics
Spring 2008
Extent and Intensity
2/2. 4 credit(s) (plus extra credits for completion). Type of Completion: zk (examination).
Teacher(s)
prof. Ing. Václav Přenosil, CSc. (lecturer)
Guaranteed by
prof. Ing. Václav Přenosil, CSc.
Department of Machine Learning and Data Processing – Faculty of Informatics
Timetable
Mon 16:00–17:50 B202
Prerequisites
Courses PA174 - Design of Digital Computersis II, PA176 - Digital Computers Architecture II and PB161 - C++ Programming are advisable source of necessary knowledges for current course.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
there are 37 fields of study the course is directly associated with, display
Course objectives
Analyse, design and implementation of the digital system particular circuit.
Syllabus
  • Submission of the project Analyse of the task Proposal of the solving Choice of the design method Choice of the implementation technology Modelling and simulation of the design Debugging of the design Design implementation
Assessment methods (in Czech)
Předmět je zaměřen na praktické řešení konkrétního problému z konstrukce číslicových systémů. Závěrečné hodnocení má formu obhajoby navrženého řešení a jiho realizace.
Language of instruction
Czech
Further comments (probably available only in Czech)
The course is taught annually.
The course is also listed under the following terms Spring 2009, Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2014, Spring 2015, Spring 2016, Spring 2017, Spring 2018, Spring 2019, Spring 2020, Spring 2021, Spring 2022, Spring 2023, Spring 2024, Autumn 2024, Spring 2025.

PV191 Project of Designing Digital Computer

Faculty of Informatics
Spring 2007

The course is not taught in Spring 2007

Extent and Intensity
2/2. 4 credit(s) (plus extra credits for completion). Type of Completion: zk (examination).
Teacher(s)
prof. Ing. Václav Přenosil, CSc. (lecturer)
Guaranteed by
prof. Ing. Václav Přenosil, CSc.
Department of Machine Learning and Data Processing – Faculty of Informatics
Prerequisites
Courses PA174 - Design of Digital Computersis II, PA176 - Digital Computers Architecture II and PB161 - C++ Programming are advisable source of necessary knowledges for current course.
Course Enrolment Limitations
The course is offered to students of any study field.
Course objectives
Analyse, design and implementation of the digital system particular circuit.
Syllabus
  • Submission of the project Analyse of the task Proposal of the solving Choice of the design method Choice of the implementation technology Modelling and simulation of the design Debugging of the design Design implementation
Assessment methods (in Czech)
Předmět je zaměřen na praktické řešení konkrétního problému z konstrukce číslicových systémů. Závěrečné hodnocení má formu obhajoby navrženého řešení a jiho realizace.
Language of instruction
Czech
Further comments (probably available only in Czech)
The course is taught annually.
The course is taught: every week.
The course is also listed under the following terms Spring 2008, Spring 2009, Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2014, Spring 2015, Spring 2016, Spring 2017, Spring 2018, Spring 2019, Spring 2020, Spring 2021, Spring 2022, Spring 2023, Spring 2024, Autumn 2024, Spring 2025.
  • Enrolment Statistics (recent)