Přeskočit na horní lištu
Přeskočit na hlavičku
Přeskočit na obsah
Přeskočit na patičku
EN
>
Publikace
>
Vyhledávání publikací
Vyhledávání publikací
Pokročilé vyhledávání
Repozitář
Vybrané publikace/výsledky
Influence of deposition parameters on mechanical properties of plasma deposited silicon oxide films on polycarbonates (1997)
Influence of discharge and substrate parameters on PECVD of TEOS/argon mixtures (1997)
Temperature measurements of various objects immersed in rf low pressure plasma supported by plasma optical diagnostics (1997)
Mechanical and optical properties of silicon oxide protective coatings prepared by PECVD (1997)
Protection Coatings for Polycarbonates based on PECVD from Organosilicon Feeds (1998)
Mechanical Properties of Thin Films Prepared by PECVD under Various Deposition Conditions (1998)
Influence of Deposition Parameters on Mechanical Properties opf SiO2-like Protective Coatings (1998)
Optimization of PECVD from Standpoint of Optical Properties of Protective Coatings on Polycarbonates (1998)
Influence of Substrate Emisivity on Plasma Enhanced CVD (1998)
Optical Characterisation of Carbon Containing Films Deposited by Plasma Enhanced CVD (1998)
Properties of Silicon Containing Thin Films Deposited by PECVD (1998)
Influence of Substrate and Electrode Emissivity on Plasma Enhanced CVD (1998)
The influence of substrate emissivity on plasma enhanced CVD of diamond-like carbon films (1999)
Plazmochemicka depozice oteruvzdornych tenkych vrstev na plastickych materialech (1999)
Deposition of CNx Films in Inductively Coupled RF Discharge (1999)
Characterization of Composite Carbon Nitride Films Prepared by the Inductively Coupled RF Plasma (1999)
Plazmova depozice oteruvzdornych ochrannych vrstev na polykarbonatech a vliv teploty substratu na vlastnosti techto vrstev (1999)
Characterization of CNx/SiOy Films Prepared by the Inductively Coupled RF Discharge (2000)
Deposition of nanocomposite CNx/SiO films in inductively coupled r.f. discharge (2000)
Optical diagnostics of inductively coupled RF discharge during deposition of nanocomposite CNx/SiOy films (2000)
Modification of Plasma Deposited DLC Films by Hexamethyldisiloxane Addition (2001)
Optical diagnostics of inductively coupled RF discharge (2001)
Deposition of DLC:Si(O) Films in Low Pressure Discharges (2001)
Plasma enhanced chemical vapor deposition of silicon incorporated diamond-like carbon films (2000)
Temperature Measurements and Energy Balance of Polycarbonate Samples during Plasma Treatment (2000)
Influence of Discharge Parameters on Composition of Films Deposited by PECVD from Hexamethyldisiloxane/Oxygen Mixtures (2000)
Low Pressure Plasma Treatment of Polycarbonate (2000)
Surface Modification of Polymers by Low Pressure Plasma and Its Characterization (2000)
Plazmová depozice ochranných vrstev na bázi uhlíku (1999)
Treatise on Heating of Objects Immersed in Plasma (2000)
Superplasticita (1996)
Fyzikální experiment a jeho počítačový model (1996)
Dvojkužel na nakloněné rovině, pohled geometrický (1996)
Preparation of enhanced CN-based hard coatings by PECVD (2001)
Optical Properties of Si Incorporated Diamond-like Carbon Films Deposited by RF PECVD (2001)
Stanovení povrchové energie tenkých vrstev nanášených v plazmatu vysokofrekvenčního výboje (2001)
Improvement of the Efficiency of the Silicon P-I-N cells by Silicon Incorporated Diamond-like Carbon Antireflective Coating (2001)
Plasma Enhanced CVD of DLC:Si(O) Films from Methane/Hexamethyldisiloxane Feeds (2001)
Diagnostics of Radio Frequency Oxygen Plasma by Optical Emission Spectroscopy (2001)
Optical characterization of DLC:Si films prepared by PECVD (2001)
Plasma modification of polycarbonates (2001)
Determination of Mechanical Properties of Thin Films by the Indentation Techniques (2001)
Creep behaviour of leaded brasses (2002)
Temperature dependence of mechanical properties of DLC/Si protective coatings prepared by PECVD (2002)
Stanovení povrchové energie diamantu-podobných vrstev nanášených v plazmatu vysokofrekvenčního výboje (2001)
Improvement of the efficiency of the silicon solar cells by silicon incorporated diamond-like carbon antireflective coatings (2002)
Advanced methods for deposition of thin films: monitoring, properties, application (2002)
Enhancement of the Material Surface Properties by Plasma Deposition of Thin Films at Atmospheric Pressure (2002)
Enhancement of the Material Surface Properties by Plasma Deposition of Thin Films at Atmospheric Pressure (2002)
Study of the Surface Energy of Plasma Activated Non-Woven Polypropylene Textiles (2003)
Optical diagnostics of atmospheric pressure glow discharge in nitrogen with admixture of organosilicon (2003)
Deposition of polymer films by rf plasma nozle at atmospheric pressure (2003)
Plasma diagnostics of surface discharge at atmospheric pressure in nitrogen and organosilicon mixture (2003)
Srovnání acido-bazického a OWRK modelu pro stanovení volné povrchové energie (2003)
Optical properties of diamond-like carbon films containing SiOx (2003)
New Dispersion Model of the Optical Constants of the DLC Films (2003)
Plasma Deposition of Diamond-Like Protective Coating with Silicon Oxide Content (2003)
Utilization of atmospheric pressure glow discharge for the deposition of thin polymer films (2003)
Effect of the Discharge Conditions on the Mechanical Properties of the Plasma Deposited DLC:SiOx Films (2003)
Study of Mechanical Properties of Nanostructured Multilayer NbN/C-N Coatings Prepared by Reactive Sputtering (2003)
Estimation of the Surface Free Energy of Diamond-like Carbon Films (2002)
Mechanical Properties of Multilayer Coatings on Polycarbonates Prepared by PECVD (2003)
Deposition of polymer films in diffuse coplanar surface discharge (2003)
Deposition of protective hydrophobic thin films in surface discharge at atmospheric pressure (2003)
Deposition of thin organosilicon polymer films in atmospheric pressure glow discharge (2003)
Depozice hydrofobních polymerových vrstev v povrchovém barierovém výboji za atmosfericlého tlaku (2003)
Deposition of Polymer Coatings in Atmospheric pressure glow discharge (2003)
Surface properties of polyethylene after low-temperature plasma treatment (2003)
Study of influence of discharge parameters on mechanical properties of plasma treated surfaces (2003)
Surface treatment in atmospheric pressure glow discharge (2003)
Dependence of the Normalized Absorbance of the DLC:SiOx Thin Films on the Flow Rate of HMDSO (2003)
Plasma enhanced CVD of organisilicon plasma polymers (2003)
Electrical conductivity of Si incorporated diamond-like carbon films deposited by PECVD (2003)
Diamond Growth on silicon and WC-Co by microwave plasma chemical vapor deposition (2003)
Optical Properties of Diamond-Like Carbon Films Containing SiOx Studied by the Combined Method of Spectroscopic Ellipsometry and Spectroscopic Reflectometry (2004)
Mirror effect in PECVD reactor and its explanation via MC-PIC computer simulation (2004)
Deposition of polymer films by rf discharge at atmospheric pressure (2004)
Activation of polyethylene and polypropylene in atmospheric pressure glow discharge (2004)
Structural changes of plasma deposited SiOxCyHz thin films attained by thermal annealing (2004)
Thermal stability of coatings prepared in atmospheric pressure glow discharge (2004)
On the analysis of surface free energy of DLC coatings deposited in low pressure RF discharge (2004)
Deposition of teflon like coatings in surface barrier discharge (2004)
Deposition of thin organosilicon polymer films in atmospheric pressure glow discharge (2004)
Study of Argon Plasma Treatment of Polycarbonate Substrate (2003)
DSI - nový trend ve fyzice materiálů (2004)
Effect of the Creep Deformation on the Microstructure and Indentation Response of Leaded Brass (2004)
Study of mechanical properties of nanocomposite multilayer coatings (2004)
Plasma treated polymer surfaces studied by SEM and AFM (2004)
Deposition of Protective Hydrophobic Coatings in Atmospheric Pressure Surface Barrier Discharge (2004)
Monte Carlo and Particle in Cell Simulation of Mirror Effect in PECVD reactor (2004)
Surface modification of polyethylene and polypropylene in atmospheric pressure glow discharge (2005)
Enhancement of Hydrophilicity of Polymers in Atmospheric Pressure Glow Discharge (2004)
Study of the Fracture of Coating/Substrate Systems (2004)
Electrical Properties of SiOxHyCz Coatings Prepared by PECVD (2005)
Protective Coatings Deposition on Paper by Atmospheric Pressure Surface barrier Discharge (2005)
Atmospheric Pressure Glow Discharges and Their Applications (2005)
Zařízení pro měření povrchové energie pevných látek (2004)
Mechanical stresses studied by optical methods in diamond-like carbon films containing Si and O (2004)
Influence of the temperature on properties of plasma polymerised organosilicon coatings (2005)
Study of the Fracture of Coating/Substrate Systems (2004)
Mechanical stability of the p-i-n solar cells studied by indentation method (2005)
Study of carbon films on silicon substrate (2005)
Mechanické vlastnosti plazmově deponovaných tenkých vrstev na různých substrátech (2005)
Possibilities of the Depth Sensing Indentation Test (2005)
Thermomechanical stability of the p-i-n solar cells studied by DSI technique (2005)
Complex study of the mechanical properties of a-Si:H and a-SiC:H thin films (2005)
Modification of polymer surfaces using atmospheric pressure barrier discharges (2005)
Influence of silicon, oxygen and nitrogen admixtures on the properies of plasma deposited amorphous diamond-like carbon coating (2005)
Investigation of High Power Pulsed Microwave Discharge (2005)
Time resolved measurements of the N2-O2 afterglow (2005)
Electrical and dielectrical properties of SiOxHyCz thin films prepared by PECVD (2005)
Enhancement of mechanical properties of PP-HMDSO/HMDSZ films by means of thermal annealing (2005)
Thermal stability of SiOxCyHz films prepared by PECVD (2005)
Měření mechanického napětí v tenkých vrstvách pomocí kombinované optické metody (2005)
Theoretical study of pulsed microwave discharge in nitrogen (2005)
Actinometry for understanding PECVD of thin films from O2/HMDSO plasmas (2005)
Study of the mechanical properties of thin films using combined nanoindentation and AFM measurements (2005)
Thermal stability of the optical properties of plasma deposited diamond-like carbon thin films (2005)
Influence of technological conditions on mechanical stresses inside diamond-like carbon films (2005)
Influence of the pulse duration of fast high power magnetron discharge on the amount of ion collected on the substrate (2005)
Experimental Study and Modelling of the Afterglow of an N2-O2 Microwave Discharge (2005)
Comparison of the ionisation efficiency in a microwave and a radio-frequency assisted magnetron discharge (2005)
Spectroscopic analysis of a pulsed magnetron discharge (2005)
Preionised pulsed magnetron discharges for ionised physical vapour deposition (2005)
Spatial characterization of an IPVD reactor: neutral gas temperature and interpretation of optical spectroscopy measurements (2005)
Characterisation of nitrogen-oxygen flowing afterglow (2005)
Diagnostics of high power pulsed microwave discharge (2005)
Modeling of high power pulsed microwave discharge (2005)
Role of Oxygen Admixture on Nitrogen Afterglow (2005)
Study of High Power Pulsed Microwave Discharge Afterglow (2005)
Electrical Properties of Plasma Deposited Thin Films (2005)
Correlation between SiOx Content and Properties of DLC:SiOx Films Prepared by PECVD (2003)
Reduction of transient regime in fast preionized high power pulsed magnetron discharge (2005)
REFRACTORY METAL FILM DEPOSITION BY THERMIONIC VACUUM ARC METHOD (2005)
Thermal stability of diamond like carbon thin films prepared using plasma enhanced chemical vapor deposition (2005)
Preparation and study of protective coatings deposited on polycarbonate substrate by PECVD (2005)
Atmospheric pressure microwave torch for synthesis of carbon nanotubes (2005)
Plasma Enchanced CVD of Carbon Nanotubes in Atmosferic Pressure Microwave Torch (2005)
Growth of Carbon Nanotubes in Microwave Plasma Torch at Atmospheric Pressure (2005)
Analytical electron microscopy of plasma deposited carbon nanostructures (2005)
Scanning electron microscopy of carbon micro- and nanostructures prepared in microwave discharges (2005)
High resolution SEM of carbon micro - and nanostructures prepared in microwave discharge (2005)
Optical measurement of mechanical stresses in diamond-like carbon films (2005)
Plasma enhanced CVD of hard DLC/SiOx coatings from methane and hexamethyldisiloxane (2005)
Ionized physical vapor deposition by high power fast pulsed magnetron discharge (2005)
Mechanical properties of amorphous and nanocrystalline silicon thin films on flexible substrates (2005)
Thermoionic vacuum arc (TVA) deposited tungsten thin film characterization (2006)
RF plasma pencil - charakteristics and application (2006)
Plasma Modification of Paper by Means of Surface Barrier Discharge (2005)
Carbon nanotubes synthesis in microwave plasma torch at atmospheric pressure (2006)
An experimental study of high power microwave pulsed discharge in nitrogen (2006)
Modification of Polymer Surfaces Using Atmospheric Pressure Barrier Discharges (2006)
Dissociation Increase Due to Admixtures (2006)
Influence of Oxygen Admixture on Nitrogen Capacitively Coupled Discharge (2006)
On Oxygen Added into Nitrogen Post-Discharge (2006)
Laser Ablation Time-of-Flight Mass Spectrometry (LA-TOF-MS) of “Nitrogen Doped Diamond-Like Carbon (DLN) Nano-Layers” (2006)
Microwave PECVD of nanocrystalline diamond with rf induced bias nucleation (2006)
Carbon nanotubes deposition by plasma enhanced chemical vapor deposition (2006)
SEM/EBSD Study of Indentation Induced Twinning in HCP Metals (2006)
Nanocomposite Diamond-Like Carbon Coatings Studied by AEM and Depth Sensing Indentation Test (2006)
Effect of changes in composition design on properties and defect structure of crystalline Sm-doped ZrO2 (2006)
Mechanical properties of nanostructured composite diamond films prepared by PECVD enhanced by RF induced DC self bias (2006)
Influence of Silicon, Oxygen and Nitrogen Upon the Properties of Plasma Deposited Amorphous Diamond-like Carbon Coatings (2006)
Complex study of mechanical properties of a-Si : H and a-SiC : H boron doped films (2006)
Mechanical properties of thin silicon films deposited on glass and plastic substrates studied by depth sensing indentation technique (2006)
Comparison of structure and mechanical properties of SiO2-like films deposited in O2/HMDSO pulsed and continuous plasmas (2006)
Deposition and Characterisation of Nanostructured silicon-oxide Containing Diamond-like Carbon Coatings (2006)
Application of Surface Barrier Discharge for deposition of Protective Coatings and Plasma Activation of Surfaces (2006)
Properties of the Carbon Thin Films Deposited by Thermoionic Vacuum Arc (2006)
Mechanické vlastnosti nanokrystalických diamantových vrstev (2006)
Poole–Frenkel conductivity in SiOxHyCz coatings prepared by PECVD (2006)
Dissociation increase due to admixtures (2006)
Carbon nanotubes synthesized by plasma enhanced CVD: Preparation of measurement of their electrical properties (2006)
Depozice uhlíkových nanotrubek metodami PECVD (2006)
Carbon nanostructures synthesis in microwave plasma torch at atmospheric pressure (2006)
Depozice nanokrystalických diamantových vrstev metodou PECVD v mikrovlnném reaktoru typu ASTEX (2006)
Deposition of teflon-like protective layers in surface discharge at atmospheric pressure (2006)
Deposition of organic polymers at higher substrate temperatures in atmospheric pressure glow discharge (2006)
Surface barrier discharge at atmospheric pressure used for deposition of protective coatings (2006)
Deposition of thin films at higher substrate temperatures in atmospheric pressure glow discharge (2006)
Vliv reakčního času na přesnost stanovení koncentrace atomů dusíku titrační metodou (2006)
Application of surface barrier discharge for deposition of protective coatings at atmospheric pressure (2006)
Microstructure and Micromechanical Properties of As-cast Mg-Sn-Ca and Mg-Sn-Mn Alloys (2006)
Effect of Heat-Treatment on the Microstructure, Microhardness and Corrosion of Cast Mg-3Sn-2Ca Alloy (2006)
Study od Mechanocal Properties of Diamond-like Crabon and Nanocomposite Diamond Coatings Prepared by Several Different Deposition Techniques (2006)
Modeling of DLC Optical Properties Based on Parameterization of Density of States (2006)
Silicon-oxide Containing Diamond-like Carbon Coatings Prepared Using Plasma Enhanced Chemical Vapor Deposition (2006)
Comparison of evaluating methods of thin films nanohardness (2006)
Depth sensing indentation at nano- and microscale (2006)
Study of depth sensing indentation method using well defined standard and multilayer NbN/C-N coatings (2006)
Deposition of protective couatings in RF organosilicon discharges (2006)
Optical emission spectroscopy of microwave plasma torch during deposition of carbon nanotubes (2006)
Thermomechanical Stability of the p-i-n Solar Cells Studied by Depth Sensing Indentation Technique (2006)
Effect of Changes in Composition Design on Properties and Defect Structure of Crystalline Sm-doped ZrO2 (2007)
Plasmachemical Processes in Oxygen-Nitrogen Afterglow (2007)
Increase of Nitrogen Dissociation Degree due to Oxygen Admixture to Nitrogen Post-Discharge (2007)
Kinetic of O Species in Low-Pressure Microwave N2-O2 Afterglow (2007)
Analysis of the Transport of Ionized Titanium Atoms in a Highly Ionized Sputter Deposition Process (2007)
Experimental study of a pre-ionized high power pulsed magnetron discharge (2007)
Comparative Study of Films Deposited from HMDSO/O2 in Continuous Wave and Pulsed rf Discharges (2007)
Deposition of protective coatings in rf organosilicon discharges (2007)
Organosilicon thin films deposited by plasma enhanced CVD: Thermal changes of chemical structure and mechanical properties (2007)
Characterization of Carbon Nanotubes Deposited in Microwave Torch at Atmospheric Pressure (2007)
Discussion of important factors in deposition of carbon nanotubes by atmospheric pressure microwave plasma torch (2007)
Deposition of Protective Coatings in Surface Barrier Discharge at Atmospheric Pressure (2007)
Study of the indentation size effect using depth sensing indentation and continuous stiffness measurement techniques (2007)
Deposition and analysis of thin films produced in atmospheric pressure glow discharge (2007)
Evolution of nitrogen atom density in the nitrogen post-discharge with oxygen admixture (2007)
Model of reactive magnetron sputtering process with non-uniform discharge current density (2007)
Způsob realizace polyreakcí, plazmo-chemických polyreakcí, jejich modifikace a modifikace makromolekulárních látek plazmovou tryskou s dielektrickou kapilárou obepnutou dutou katodou (2007)
Carbon nanostructures deposition in microwave plasma torch at atmospheric pressure on sensors for heavy metal detection (2007)
Comparative study on several micro and nanoindentation techniques including AFM (2007)
ZrO2 - Yb2O3 System as an Alternative Electrolyte for Planar Intermediate Solid State Fuel Cells (IT-SOFCs) (2007)
Deposition of thin films on glass substrate in atmospheric pressure glow discharge (2007)
Surface modification of polycarbonate in homogeneous atmospheric pressure discharge (2007)
Gas Pressure Sensor Based on PECVD Grown Carbon Nanotubes (2007)
UHLÍKOVÝMI NANOTRUBICEMI NANOSTRUKTOROVANÉ PRACOVNÍ ELEKTRODY SENZORŮ (2007)
CARBON NANOTUBES SYNTHESIZED BY PLASMA ENHANCED CVD AT ATMOSPHERIC PRESSURE AND THEIR POST-DEPOSITION TREATMENT (2007)
Importance of Nucleation Phase in Microwave PECVD of Ultra-Nanocrystalline Diamond Films (2007)
Study of nanocrystalline iron phases on Si-SiO2/Fe MWCNT Samples (2007)
Studying an Influence of a Nucleation Phase on Nanocrystalline Diamond Film Properties (2007)
Treatment of catalytic iron layer for carbon nanotube growth (2007)
Deposition and Characterization of Nanostructured Silicon-Oxide Containing Diamond-Like Carbon Coatings (2007)
Plasma enhanced CVD of thin films using hexamethyldisiloxane and octamethyltetrasiloxane monomers (2007)
The instrumented indentation test - powerful tool in development of new materials (2006)
Self-consistent spatio-temporal simulation of pulsed microwave discharge (2008)
Experimental Study of High Power Pulsed Microwave Discharge (2007)
Kinetics of O(3P) species in N2-O2 microwave post-discharge (2007)
Model pulzního MW výboje velkého výkonu (2007)
Space and time dependent simulation of pulsed microwave discharge (2007)
Laser Ablation Time-of-Flight Mass Spectrometry LA-TOF-MS of Nitrogen Doped Diamond-Like Carbon DLN Nano-Layers (2007)
Deposition of protective hydrophobic coatings in atmospheric pressure surface barrier discharge (2007)
Correlation of thermal stability of the mechanical and optical properties of diamond-like carbon films (2007)
Preparation of protective coatings on polycarbonate from CH4/HMDSZ mixture using PECVD (2007)
Study of Mechanical Properties of Metallic Surface Layers on Silicon Substrates (2007)
Comparative study on mechanical properties of nanostructured carbon films (2007)
Preparation and characterisation of nanostructured diamond-like carbon films (2007)
Plasma deposition of doped Diamond-like carbon nano layers. Process modeling and prediction using Artificial Neural Networks (2007)
Structure and properties of DLC/SiOx films deposited in CW and pulsed plasma (2007)
Structure and properties of carbon thin film deposited using Thermionic Vacuum Arc (TVA) methode (2007)
Investigation of the mechanical properties of the thin tungsten films deposited by Thermionic Vacuum Arc (TVA) methode (2007)
Effect of composition changes on properties and defect structure of crystalline Sm-doped ZrO2 (2007)
Mechanical properties of superhard TiB2 coatings prepared by DC magnetron sputtering (2007)
Lokální mechanické vlastnosti 2007 (2007)
Studium DLC vrstev na plastových substrátech (2007)
Study of Mechanical Properties of NCD Coatings (2007)
The instrumented indentation test - powerful tool in development of new materials (2006)
The instrumented indentation test - powerful tool in development of new materials (2007)
Studium vlivu velikosti vtisku při užití DSI a CSM techniky (2006)
Properties of the carbon thin films deposited by thermionic vacuum arc (2007)
Characterization by nanoindentation and Scanning Electron Microscopy of the spin valves structuresprepared by Thermionic Vacuum Arc (TVA) method (2007)
Multiscale modelling of nanoindentation test in nickel crystal (2007)
Studying an influence of a nucleation phase on nanocrystalline diamond film properties (2007)
Polyurethane composite with carbon nanotube filler and its properties (2007)
Hydrophylisation of non-woven polypropylene textiles using atmospheric pressure surface barrier discharge (2008)
Tribological Properties and Characterization of the Nanostructured Carbon Thin Films Deposited by Thermionic Vacuum Arc Technology (2007)
Influence of postanneling on structure, hardness and residual stress of TiB2 superhard coatings (2006)
Mechanical properties of the tungsten thin film deposited by thermionic vacuum arc (TVA) method (2006)
Surface modification of polycarbonate (bisphenol A) by low pressure rf plasma (2003)
On the Relation between Pop-Ins in Nanoindentation Tests and the Ideal Shear Strength (2007)
Scanning probe microscopy analysis of delaminated thin films (2007)
Phase composition-dependent physical and mechanical properties of YbZrO solid solutions (2008)
Influence of substrate material on plasma indeposition/sputtering reactor: experiment and computer simulation (2008)
Harmonic analysis of discharge voltages as a tool to control RF sputtering deposition process (2008)
Measurement of Fundamental and Higher Harmonic Frequencies as Tool to Control RF Sputtering Deposition Process (2008)
Role of Neutral Gas Temperature on Hysteresis Behaviour of Reactive Sputtering Deposition Process (2008)
Electron Density Measurement Using Self-Oscillating Resonant Cavity (2008)
Absolute Density of N Atoms Produced by Dielectric Barrier Atmospheric Discharge (2008)
Nitrogen Atom Behaviour in N2 Post-Discharge (2008)
Modeling of Radial Variation of Target Poisoning During Reactive Sputtering Deposition Process (2008)
Limits for H, N, O and O2 Detection by Means of Electron Paramagnetic Resonance (2008)
Study of Local Mechanical Preoperties of Magnesium based Alloys (2007)
STUDIUL PROPRIETĂŢILOR MECANICE ALE STRATURILOR SUBŢIRI DE CARBON TIP DIMOND-LIKE OBŢINUTE PRIN DIFERITE METODE DE DEPUNERE (2008)
Relationship between the nanoindentation response of amorphous carbon thin films and the depth profile of their structure (2008)
Deposition of Diamond-Like Carbon by Gaseous Thermionic Vacuum Arc Method (2007)
Comparative Study on Mechanical Properties of DLC Coatings Prepared by Several Different Deposition Techniques (2008)
Preparation and characterisation of carbon films prepared from HMDSZ/methane/nitrogen or hydrogen mixture using PECVD (2008)
Study of mechanical properties of graded amorphous carbon coatings prepared using PECVD (2008)
Study of the Mechanical Properties of Diamond-like Carbon Thin Films Deposited in Single and Dual Frequency Capacitive Discharges (2008)
Deposition of Nanostructured Diamond-Like Carbon Films in Dual Frequency Capacitive Discharge (2008)
DEPOSITION OF THIN FILMS IN ATMOSPHERIC PRESSURE HOMOGENEOUS DISCHARGE (2008)
Surface morphology of amorphous hydrocarbon thin films deposited in pulsed radiofrequency discharge (2008)
Comparison of various plasmachemical processes with respect to the gas temperature (2008)
DEPOSITION OF THIN FILMS IN ATMOSPHERIC PRESSURE GLOW DISCHARGE IN N2 + HMDSO + O2 ATMOSPHERE (2008)
DEPOSITION OF THIN FILMS IN ATMOSPHERIC PRESSURE HOMOGENOUS DISCHARGE IN N2 + HMDSO + O2 ATMOSPHEREIN N2 + HMDSO + O2 ATMOSPHERE (2008)
Soustava s ultrahydrofobními vlastnostmi, stavební a přírodní zábavný a/nebo relaxační element (2008)
Lokální modifikace povrchu plazmovou tužkou (2008)
High power pulsed microvawe discharge: theory and experiment (2008)
Evolution of N and O atom densities for oxygen admixture added into nitrogen afterglow (2008)
Processes in afterglow of N2-O2 discharges (2008)
Modeling of reactive sputtering process with non-linear discharge current density (2008)
Influence of N2 and CH4 on deposition rate of boron based thin films prepared by magnetron sputtering (2008)
Advanced modeling of reactive sputtering process with non-linear discharge current density (2008)
Influence of N2 and CH4 on depositon rate of boron based thin films prepared by magnetron sputtering (2008)
Study of a fast high power pulsed magnetron discharge: role of plasma deconfinement on the charged particle transport (2008)
Optical Characterization of Ultrananocrystalline Diamond Films (2008)
Modeling of optical constants of diamond-like carbon (2008)
Optical characterization of diamond-like carbon thin films non-uniform in thickness using spectroscopic reflectometry (2008)
Studying an influence of a nucleation phase on nanocrystalline diamond film properties (2007)
Determination of N2(A) population from optical emission spectra (2008)
FUNCTIONALIZATION OF CARBON NANOTUBES IN LOW PRESSURE CAPACITIVE COUPLED RF DISCHARGE (2008)
SYNTHESIS OF CARBON NANOTUBES AND IRON OXIDE NANOPARTICLES IN MW PLASMA TORCH WITH IRON PENTACARBONYL IN GAS FEED (2008)
NUCLEATION AND PLASMA ENHANCED CHEMICAL VAPOR DEPOSITION OF ULTRANANOCRYSTALLINE DIAMOND FILMS ON DIFFERENT SUBSTRATES (2008)
Limitations and possible improuvements of DLC dielectric response model based on parameterization of density of states (2009)
Optimization of the performance of graded amorphous carbon coatings to steel substrates using PECVD (2008)
Study of thermal stability of Silicon, Oxygen and/or Nitrogen containing Diamon-like Carbon coatings (2008)
Nanoindentation studies on amorphous carbon films prepared using plasma enchanced chemical vapor deposition (2008)
Characterization of non-uniform diamond-like carbon films by spectroscopic ellipsometry (2009)
Characterization of nanostructured diamond-like carbon coatings deposited in single and dual frequency capacitive discharges (2008)
Surface morphology of amorphous hydrocarbon thin films deposited in pulsed radiofrequency discharge (2008)
Preparation and characterisation of carbon films prepared from HMDSZ/Methane/Nitrogen or Hydrogen mixture using PECVD (2008)
The Second Central European Symposium on Plasma Chemistry (2008)
Ionization Processes and Plasma Chemistry in Pulsed RF Glow Discharge TOF Mass Spectroscopy for Thin Film Depth Profile Analyses (2008)
Higher harmonic frequencies of discharge voltages as extremely sensitive marker of state of RF reactive sputtering deposition process (2009)
Harmonic analysis of discharge voltages as a tool to control the RF sputtering deposition process (2009)
Application of spectroscopic imaging reflectometry to analysis of area non-uniformity in diamond-like carbon films (2009)
Synthesis of carbon nanotubes and iron oxide nanoparticles in MW plasma torch with Fe(CO)5 in gas feed (2009)
Mechanical and microwave absorbing properties of carbon-filled polyurethane (2009)
Plasma diagnostics using electron paramagnetic resonance (2009)
Modelling of surface processes taking place during reactive magnetron sputtering deposition process with simultaneous adding of hydrogen and oxygen (2009)
Is it possible to control degree of target poisoning during RF reactive magnetron sputtering by higher harmonic frequencies of discharge voltage? (2009)
Spectroscopic investigation of high power pulsed microwave discharge (2009)
Hybrid PVD-PECVD sputtering deposition process - from properties of deposited films to process characteristics (2009)
Modelling of the reactive sputtering process with non-uniform discharge current density and different temperature conditions (2009)
On the oxygen addition into nitrogen post-discharge (2009)
Relationship between effective ionic radii, structure and electro-mechanical properties of zirconia stabilized with rare earth oxides M2O3 (M = Yb, Y, Sm) (2009)
Laser ablation time-of-flight mass spectrometry (LA-TOF-MS) of silicon doped diamond-like carbon (DLC-Si) (2009)
Gold carbides laser ablation synthesis and mass spectrometry (2009)
Study of the Mechanical Properties of Diamond-like Carbon Coatings on Polymer Substrates (2009)
Thermal Desorption Spectroscopy Study on Diamond-like Carbon Coatings (2009)
Composition and functional properties of organosilicon plasma polymers from hexamethyldisiloxane and octamethylcyclotetrasiloxane (2008)
Optimisation of mechanical properties of plasma deposited graded multilayer diamond-like carbon coatings (2008)
Reactive magnetron sputtering - modelling of different target utilization in metallic and compound mode and situation when oxygen and hydrogen are added simultaneously (2009)
Výzkum a aplikace nízkoteplotního plazmatu na ÚFE PřF MU v Brně (2009)
MECHANICAL PROPERTIES OF THIN FILMS DEPOSITED BY TVA AND G-TVA METHODS (2010)
Higher harmonics of discharge voltage as tool to control accurately state of RF sputtering deposition process (2009)
Modeling of reactive magnetron sputtering deposition process - different target utilization, situation when O2 and H2 are added simultaneously (2009)
Suppressed hysteresis behaviour of titanium sputtering in acetylene gas. (2009)
Carbon Nanotubes Functionalized in Oxygen and Water Low Pressure Discharges used as Reinforcement of Polyurethane Composites (2009)
Passivation of iron nanoparticles synthesized in microwave plasma (2009)
Structural and defect changes of hydrogenated SiGe films due to annealing up to 600degC (2009)
Synthesis of Carbon Nanotubes in MW Plasma Torch with Different Methods of Catalyst Layer Preparation and their Applications (2009)
Optimization of Discharge Conditions for Deposition of Protective Coatings on Polymer Substrates (2009)
Synthesis of iron nanoparticles as precursor for carbon nanostructures growth in atmospheric pressure microwave plasma torch (2010)
Technika pro zlepšení plstnících vlastností živočišných vláken využívající plazmovou úpravu (2009)
Plasma diagnostics using electron paramagnetic resonance (2010)
Structural and defect changes of hydrogenated SiGe films due to annealing up to 600°C (2010)
Deposition of hard thin films from HMDSO in atmospheric pressure dielectric barrier discharge (2010)
Synthesis of carbon nanotubes by plasma-enhanced chemical vapor deposition in an atmospheric-pressure microwave torch (2010)
Influence on surface morphology by plasma-surface interaction between Al film and atmospheric pressure DCSBD plasma (2010)
Interaction of Silver Nanoparticles with Copper Substrate under Air Atmosphere (2010)
Diagnostics of reactive magnetron sputtering (2010)
Small-load nanoindentation experiments on metals (2010)
Impact of neutral gas temperatures on reactive magnetron sputtering (2010)
Preparation of self-adhesive nc-TiC/a-C:H coatings (2010)
Diagnostics of microwave discharge for surface modification (2010)
Optical and mechanical characterization of ultrananocrystalline diamond films prepared in dual frequency discharges (2010)
Band structure of diamond-like carbon films assessed from optical measurements in wide spectral range (2010)
Behaviour of hybrid PVD-PECVD process of Ti sputtering in argon and acetylene atmosphere (2010)
Deposition and characterization of nc-TiC/a-C:H coatings prepared by hybrid PVD-PECVD (2010)
Monitoring of magnetron target poisoning by measurement of higher harmonics of discharge voltages (2010)
Plasma synthesis of Fe-based nanoparticles in low-pressure discharge (2010)
Plazmová syntéza železných nanočástic a jejich aplikace (2010)
Higher harmonic frequencies in capacitive discharges (2010)
Higher harmonic frequencies in capacitive discharges (2010)
Behaviour of Hybrid PVD-PECVD Process in Comparison with Conventional Reactive Magnetron Sputtering (2010)
ATMOSPHERIC PRESSURE DCSBD PLASMA TREATMENT OF AL SURFACE: STUDY OF SURFACE MORPHOLOGY AND CHEMICAL COMPOSITION (2010)
Plasma synthesis of Fe- and Co-based nanoparticles in low-pressure discharge (2010)
Nanocrystalline layer deposition by organometallic compound deposition in microwave discharges (2010)
Microwave plasma synthesis of magnetic nanoparticles (2010)
Deposition and characterization of n-TiC/a-C:H coatings prepared by hybrid PVD-PECVD (2010)
Suppressed hysteresis behaviour of Ti sputtering in acetylene gas (2010)
Behaviour of Hybrid PVD-PECVD in Comparison with Conventional Reactive Magnetron Sputtering. (2010)
Hybrid PVD-PECVD process: focusing on modelling and steady-state conditions (2010)
Deposition and analyses of nc-TiC/a-C:H coating prepared by balanced magnetron sputtering (2010)
MICROWAVE PLASMA SYNTHESIS OF IRON NANOPARTICLES (2010)
SYNTHESIS OF CARBON NANOSTRUCTURES BY PLASMA ENHANCED CHEMICAL VAPOUR DEPOSITION AT ATMOSPHERIC PRESSURE (2010)
Derivatization and analysis of carbon nanotubes (2010)
Monitoring of PVD, PECVD and etching plasmas using Fourier components of RF voltage (2010)
Development of transparent protective coatings on polycarbonate substrates using PECVD (2010)
Preparation of multifunctional layered materials (2010)
Multilayered transparent polymer protective coatings using PECVD (2010)
Comparative study on hydrogenated and deuterated amorphous carbon films deposited by RF PECVD (2010)
Plasma deposition of hard carbon films from hydrogen or deuterium + methane mixtures (2010)
Study on the properties of modified amorphous carbon thin films deposited by PECVD. (2010)
Plasmachemical synthesis of maghemite nanoparticles in atmospheric pressure microwave torch (2011)
Role vodíku na strukturální změny SiGe:H vrstev (2011)
Microwave plasma synthesis of magnetic nanoparticles (2010)
Time resolved spectroscopy of high power pulsed microwave discharge in nitrogen (2010)
Time resolved investigations of high power pulsed microwave discharge in nitrogen and neon (2010)
PREPARATION AND CHARACTERIZATION OF DLC:N FILMS (2010)
Effect of nitrogen incorporation on mechanical properties of DLC coatings on metallic substrates (2010)
Combination of Synchrotron Ellipsometry and Table-Top Optical Measurements for Determination of Band Structure of DLC Films (2011)
Mechanical properties of thin films deposited by TVA and G-TVA methods (2011)
Deposition and analyses of hard and thick well adherent nc-TiC/a-C:H coatings prepared by hybrid PVD-PECVD process (2011)
Metal/carbon nanocomposite coatings: metal reactivity effect on the microstructure and the physical properties (2011)
Morphological study of nanocrystalline TiC/a-C:H composites deposited by hybrid PVD-PECVD process (2011)
Microstructural Study and Mechanical Properties of TiC/C Composite Coatings Deposited by hybrid PVD/PECVD Process (2011)
Optical characterisation of SiOxCyHz thin films non-uniform in thickness using spectroscopic ellipsometry, spectroscopic reflectometry and spectroscopic imaging reflectometry (2011)
Ellipsometric characterisation of thin films non-uniform in thickness (2011)
Dielectric response and structure of amorphous hydrogenated carbon films with nitrogen admixture (2011)
Depth profile analyses of nc-TiC/a-C:H coating prepared by balanced magnetron sputtering (2011)
Study of hybrid PVD–PECVD process of Ti sputtering in argon and acetylene (2011)
Deposition and analyses of thick hard adherent nanocomposite titanium/carbon based coatings (2011)
Complex analysis of SiOxCyHz films deposited by an atmospheric pressure dielectric barrier discharge (2011)
Determination of metastable densities in surface-wave neon plasma by self-absorption method (2011)
Experimental study of hybrid PVD-PECVD process of metallic target sputtering in argon and acetylene (2011)
Properties of nanocomposite coatings prepared by hybrid process of metallic target sputtering in argon and acetylene (2011)
Plasma synthesised magnetic nanoparticles containing FeII and FeIII oxides (2011)
Iron-Based Nanopowders Containing alfa-Fe, Fe3C, and gamma-Fe Particles Synthesised in Microwave Torch Plasma and Investigated with Mossbauer Spectroscopy (2011)
Multilayered films based on DLC, DLC:N and SiOx grown by PECVD on stainless steel (2011)
INFLUENCE OF PLASMA DEPOSITION PARAMETERS ON INCORPORATION OF HYDROGEN OR NITROGEN INTO DLC (2011)
Optimized Plasma Enhanced Chemical Vapor Deposition from HMDSO/O2 for Surface Protection of Metals (2011)
Characterization of ultrananocrystalline diamond thin films using low energy scanning electron microscopy (2011)
On the effect of carbon content on the mechanical properties of nc-TiC/a-C:H coatings prepared by balanced magnetron sputtering (2011)
Reaction of higher harmonic frequencies on thin films (2011)
Interaction of Silver Nanopowder with Copper Substrate (2011)
Understanding of hybrid PVD-PECVD deposition process – titanium magnetron sputtering in argon and acetylene (2011)
Effect of chemical composition on in-depth mechanical properties of nc-TiC/a-C:H coatings (2011)
Experimental study of hybrid PVD-PECVD process of titanium target sputtering in argon and acetylene (2011)
Carbon composite micro- and nano-tubes-based electrodes for detection of nucleic acids (2011)
Methods for carbon nanotubes synthesis—review (2011)
Visualization of revolving modes in RF and MW nonthermal atmospheric pressure plasma jet (2011)
Mechanical Properties of Ultrananocrystalline Thin Films Deposited Using Dual Frequency Discharges (2011)
Deposition and Characterisation of Thin Hydrophobic Layers Using Atmospheric-pressure Surface Barrier Discharge (2011)
Measurement of Mechanical Properties of Composite Materials (2011)
Synthesis and Characterization of Nanostructured a-C:H (Hydrogenated Amorphous Carbon) Thin Films by Gaseous Thermionic Vacuum Arc (G-TVA) Deposition Technique (2012)
Hydrogenated Radiation Defects in Silicon: Isotopic Effect of Hydrogen and Deuterium (2011)
Effect of crystallographic structure on electrical and mechanical characteristics of Sm2O3-Doped CeO2 films (2011)
The influence of low-energy ion bombardment on the microstructure development and mechanical properties of TiBx coatings (2011)
Evaluation of hardness, tribological behaviour and impact load of carbon-based hard composite coatings exposed to the influence of humidity (2011)
Interaction of hydrogen and deuterium with radiation defects introduced in silicon by high-energy helium irradiation (2011)
Microstructure and local mechanical properties of model joints with Pb-free nanopowders (2009)
Characterization of sintered Ag nanopowder joints using nanoindentation tests (2011)
Evaluation of composition, mechanical properties and structure of nc-TiC/a-C:H coatings prepared by balanced magnetron sputtering (2012)
Higher harmonic frequencies in capacitive discharges and their using for monitoring of plasma processing (2011)
Influence of DLC films on higher harmonic frequencies in capacitive discharges (2011)
Application of higher harmonic frequencies generated in RF plasmas for monitoring of deposition processes (2011)
Growth of Carbon Materials on Gold Substrate by Plasma Enhanced CVD (2012)
Artificial Neural Networks for Diamond Like Carbon deposition: process modelling and prediction of optimal conditions (2011)
Versatile low-pressure plasma-enhanced process for synthesis of iron and iron-based magnetic nanopowders (2012)
Air DCSBD plasma treatment of Al surface at atmospheric pressure (2012)
Characterization of a periodic instability in filamentary surface wave discharge at atmospheric pressure in argon (2012)
alpha-Fe nanopowder synthesised in low-pressure microwave plasma and studied by Mossbauer spectroscopy (2011)
Versatile PECVD process for preparation of iron-based magnetic nanoparticles (2011)
Alternative method for flow measurement of clog producing gases and liquids in PVD and PECVD processes (2011)
Hydrogenation of platinum introduced in silicon by radiation enhanced diffusion (2009)
Development of reference materials for the investigation of local mechanical properties at the nanoscale (2012)
Comparison of methods of self-absorption and effective branching fractions for metastable densities determination in surface-wave neon plasma (2012)
Comparison of nc-TiC/a-C:H coatings prepared by magnetron sputtering in well balanced and highly unbalanced magnetic field (2012)
Experimental study of DC driven hybrid PVD-PECVD process (2012)
Properties of nc-TiC/a-C:H films prepared by PVD-PECVD process at low and high ion bombardment (2012)
Hybrid PVD-PECVD Process and Its Application for Carbon Ritch Nanocomposite Thin Film Deposition (2012)
Probing the structure and the hardness of titanium/carbon nanocomposite coatings deposited by hybrid PVD/PECVD process (2012)
Study of hybrid PVD-PECVD process and its application for metal/carbon film deposition (2012)
Higher harmonic frequencies in capacitive discharges and their using for monitoring of plasma processing (2012)
Feedback system to control reactive magnetron sputtering (2012)
CARBON NANOTUBES DEPOSITION USING ATMOSPHERIC PRESSURE GLOW BARRIER DISCHARGE IN ARGON WITH ACETYLENE ADMIXTURE (2012)
Comparison of nc-TiC/a-C:H Films Prepared by PVD-PECVD Process at Low and High Ion Bombardment (2012)
Hybrid PVD-PECVD Process for Synthesis of Me/C Nanocomposite Coatings (2012)
CARBON NANOTUBES DEPOSITION USING ATMOSPHERIC PRESSURE GLOW BARRIER DISCHARGE IN ARGON WITH ACETYLENE ADMIXTURE (2012)
Magnetron sputtering at CEPLANT project (2012)
Influence of hydrogen on behaviour of reactive magnetron sputtering (2012)
Monitoring and control of RF driven PVD, PECVD and etching plasmas using Fourier components of discharge voltages (2012)
Determination of metastable and ground state density by method of effective branching fractions in Ar, Ar-Ti plasma (2012)
Iron-oxide nanoparticles produced in low-pressure plasma discharge by PECVD process (2012)
Optimization of nanocomposite n-TiC/a-C:H coatings preparation and TEM study of coatings structure after deformation (2012)
Surface Treatment by Atmospheric-Pressure Surfatron Jet (2012)
Surface Nanotreatment of Silicon and Polyamide by Means of Atmospheric Microwave Plasma Jet (2012)
Methods of making graphene (2012)
MECHANICAL PROPERTIES AND MICROSTRUCTURE OF MODEL LEAD-FREE JOINTS FOR ELECTRONICS MADE WITH USE OF NANOPOWDERS (2012)
Modelling of Reactive Magnetron Sputtering with Focus on Changes in Target Utilization (2012)
Study of the Indentation Response of Nanocomposite n-TiC/a-C:H Coatings (2012)
MULTIFUNCTIONAL TRANSPARENT PROTECTIVE COATINGS ON POLYCARBONATES PREPARED USING PECVD (2012)
SILVER IONS BONDING ON POLYPROPYLENE BY UNDERWATER DOUBLE DIAPHRAGM DISCHARGE FOR ANTIMICROBIAL APPLICATIONS (2012)
ANTIBACTERIAL EFFECT OF COPPER IONS BONDED ON POLYPROPYLENE NONWOVEN BY UNDERWATER DOUBLE DIAPHRAGM DISCHARGE (2012)
PROPERTIES OF MODIFIED AMORPHOUS CARBON THIN FILMS DEPOSITED BY PECVD (2012)
MECHANICAL STABILITY OF THE P-I-N SOLAR CELLS STUDIED BY INDENTATION METHOD (2012)
gamma-Fe2O3 Nanopowders Synthesized in Microwave Plasma and Extraordinarily Strong Temperature Influence on Their Mossbauer Spectra (2012)
Laser desorption ionisation quadrupole ion trap time-of-flight mass spectrometry of titanium-carbon thin films (2013)
Method of realisation of polyreactions, plasma-chemical polyreactions, their modification and modification of macromolecular substances by the plasma jet with a dielectric capillary enlaced by a hollow cathode (2012)
Zařízení pro generování plazmatu (2013)
Increase of wettability of soft- and hardwoods using microwave plasma (2013)
Study of the thermal dependence of mechanical properties, chemical composition and structure of the nanocomposite TiC/a-C:H coatings (2013)
Gold-diamond nanocomposite as a precursor for laser ablation synthesis of gold carbides (2013)
PECVD of nanostructured SiO2 in a modulated microwave plasma jet at atmospheric pressure (2013)
Optical diagnostics of a surface-wave-sustained neon plasma by collisional-radiative modelling and a self-absorption method (2013)
On sputtered particle distribution towards substrate during target erosion - simulation and experiment (2013)
ON SPUTTERED PARTICLE DISTRIBUTION TOWARDS SUBSTRATE DURING TARGET EROSION - SIMULATION AND EXPERIMENT (2013)
INFLUENCE OF Ni DOPING ON PROPERTIES OF Ti-C NANOCOMPOSITE COATING PREPARED BY HYBRID PVD-PECVD PROCESS (2013)
INFLUENCE OF Cu AND Ni DOPING ON PROPERTIES OF Ti-C NANOCOMPOSITE COATING PREPARED BY HYBRID PVD-PECVD PROCESS (2013)
Preparation of hard nc-TiC/a-C:H coatings using hybrid PVD-PECVD process with rotating cylindrical magnetron (2013)
Comparison of nc-TiC/a-C:H nanocomposite coatings deposited by DC magnetron sputtering at low and high flux of impinging ions (2013)
TF-P2-17 Preparation of Hard nc-TiC/a-C:H Coatings Using Hybrid PVD-PECVD Process with Rotating Cylindrical Magnetron (2013)
Novel method of reactive magnetron sputtering process control (2013)
Evolution of discharge current in high power impulse magnetron sputtering (2013)
Hybrid PVD-PECVD Process and Its Applications for Carbon Rich Nanocomposite Thin Film Deposition (2013)
Preparation of hard TiC/a-C:H coatings using hybrid PVD-PECVD process with rotating cylindrical magnetron (2013)
Spatially resolved spectroscopy of atmospheric pressure microwave plasma jet used for surface treatment (2013)
Surface treatment by microwave plasma jet (2012)
Non-monotonous evolution of hybrid PVD – PECVD process characteristics on hydrocarbon supply (2013)
Rapid surface treatment of polyamide 12 by microwave plasma jet (2014)
Electrode-less plasma jet synthesis of core-shell iron/iron oxide nanoparticles (2013)
Hypergravity effects on glide arc plasma (2013)
Influence of deposition conditions on electrical and mechanical properties of Sm2O3 doped CeO2 thin films prepared by EB-PVD (+IBAD) methods part 2. Indentation hardness and effective elastic modulus (2013)
Laser ablation synthesis of new gold carbides. From gold-diamond nano-composite as a precursor to gold-doped diamonds. Time-of-flight mass spectrometric study (2014)
Time-resolved study of amplitude modulation effects in surface-wave atmospheric pressure argon plasma jet (2014)
Time resolved optical emission spectroscopy in power modulated atmospheric pressure plasma jet (2013)
Hypergravity diagnostics and material synthesis in noble gas gliding arc plasma (2013)
Surface Engineering of the Hydrogenated DLC (a-C:H) Coatings with Optimized Mechanical Performance (2013)
Microstructure and Local Mechanical Properties of Cu-Co Alloys after Severe Plastic Deformation (2014)
Analytical Electron Microscopy of Lead-free Nanopowder Solders (2010)
Tribological properties of nc-TiC/a-C:H coatings prepared by magnetron sputtering at low and high ion bombardment of the growing film (2014)
Low pressure plasmachemical processing of multi-walled carbon nanotubes for the production of polyurethane composite films with improved mechanical properties (2013)
Study of the thermal dependence of mechanical properties, chemical composition and structure of nanocomposite TiC/a-C:H coatings (2014)
Hypergravity synthesis of graphitic carbon nanomaterial in glide arc plasma (2014)
Využití hydridního PVD-PECVD procesu pro růst nc-TiC/a-C:H vrstev na zařízení s rotačními katodami (2013)
Study of Microwave Torch Plasmachemical Synthesis of Iron Oxide Nanoparticles Focused on the Analysis of Phase Composition (2014)
epsilon-Fe2O3 nanoparticles synthesized in atmospheric-pressure microwave torch (2014)
Study of the nanoindentation induced defects in nanocomposite n-TiC/a-C:H films (2014)
Modulation-Induced Filament Tearing in Microwave Atmospheric Plasma Jet (2014)
Functionalisation and pore size control of electrospun PA6 nanofibres using a microwave jet plasma (2014)
Influence of Ni dopping on structure and mechanical properties of nc-TiC/a- C:H coatings (2014)
Determination of sputtered species densities in HIPIMS discharge by optical emission spectroscopy (2014)
Nanocrystalline alpha-Fe Layer Examined by Mossbauer Spectrometry (2014)
On the control of deposition process for enhanced mechanical properties of nc-TiC/a-C:H coatings with DC magnetron sputtering at low or high ion flux (2014)
Titanium carbide/carbon nanocomposite hard coatings: A comparative study between various chemical analysis tools (2014)
Zařízení pro plazmové opracování různých typů povrchů (2014)
Preparation of hard and moderately ductile Mo2BC coatings by pulsed DC magnetron sputtering (2014)
Automatic and robust deposition process control to grow hard nc-TiC/a-C:H coatings using industrial magnetron sputtering devices (2014)
DIFFUSE COPLANAR SURFACE BARRIER DISCHARGE PRE-TREATMENT FOR IMPROVING COATING PROPERTIES (2015)
Non-thermal Atmospheric Pressure Plasma Jet Operated in Krypton and Argon: Visual Characterisation of Discharge using High-speed Camera (2014)
Self-organisation in atmospheric pressure plasma jet operating in noble gases (2014)
Electrode-less plasma jet synthesis of core-shell iron/iron oxide nanoparticles (2014)
Spatially resolved measurement of hydroxyl (OH) radical concentration in a microwave plasma jet by planar laser-induced fluorescence (2014)
On periodic oscillations observed on cathode voltage and discharge current during HIPIMS process (2014)
Determination of sputtered species densities in a HIPIMS discharge by optical emission spectroscopy (2014)
Study of the adhesion of nc-TiC/a-C:H coatings on plasma-treated steel substrates (2014)
Understanding of hybrid PVD–PECVD process with the aim of growing hard nc-TiC/a-C:H coatings using industrial devices with a rotating cylindrical magnetron (2014)
EBF Fit (2014)
Time resolved optical emission spectroscopy in power modulated atmospheric pressure plasma jet (2015)
Spatially resolved spectroscopy of an atmospheric pressure microwave plasma jet used for surface treatment (2015)
DIAGNOSTICS OF A MW ATMOSPHERIC PRESSURE PLASMA JET USING SPATIALLY RESOLVED LASER-INDUCED FLUORESCENCE OF OH RADICALS (2014)
Diamond-Like Carbon (DLC) chemical vapor deposition technology: Characterization of DLC nano-layers and artificial neural networks for process modelling (2011)
INFLUENCE OF THE HUMIDITY ON THE WEAR RESISTANCE OF nc-TiC/a-C:H COATING UNDER DYNAMIC LOADING CONDITIONS (2014)
Study of the thermal dependence of mechanical properties, chemical composition and structure of nanocomposite TiC/a-C:H coatings (Reprinted from Surface & Coatings Technology, vol 242, pg 62-67, 2014) (2014)
Comparison of different modifications of screen-printed working electrodes of electrochemical sensors using carbon nanotubes and plasma treatment (2014)
MEMS Carbon Nanotubes Field Emission Pressure Sensor With Simplified Design: Performance and Field Emission Properties Study (2015)
Influence of modulation regimes on longitudinal distribution of active species in atmospheric pressure plasma jet (2013)
Atmospheric pressure barrier discharge at high temperature: Diagnostics and carbon nanotubes deposition (2015)
Sensing Properties of Multiwalled Carbon Nanotubes Grown in MW Plasma Torch: Electronic and Electrochemical Behavior, Gas Sensing, Field Emission, IR Absorption (2015)
Optimization of Cyclopropylamine Plasma Polymerization toward Enhanced Layer Stability in Contact with Water (2014)
Method for improving felting properties of animal fibers by plasma treatment (2014)
Využití hydridního PVD-PECVD procesu pro růst TiCC II vrstev na zařízení s rotačními katodami (2014)
Comparative analysis of thermal stability of two different nc-TiC/a-C:H coatings (2015)
A comparison of different measurement methods of mechanical properties of Al thin films (2015)
MAGHEMITE NANOPOWDER SYNTHESIZED BY ATMOSPHERIC-PRESSURE MICROWAVE TORCH DISCHARGE USING IRON PENTACARBONYL AS A PRECURSOR (2011)
SYNTHESIS OF IRON NANOPARTICLES WITH CONTENT OF GAMMA-FE AND FE3C IN MICROWAVE PLASMA DISCHARGES (2011)
NANOSTRUCTURED ALPHA-FE LAYERS SYNTHESIZED IN LOW-PRESSURE MICROWAVE PLASMA (2012)
PLASMA TECHNOLOGIES FOR SYNTHESIS OF CARBON NANOTUBES AND IRON OXIDE NANOPARTICLES (2012)
SYNTHESIS OF CARBON NANOSTRUCTURES BY PLASMA ENHANCED CHEMICAL VAPOUR DEPOSITION AT ATMOSPHERIC PRESSURE (2010)
Nanocomposite nc-TiC/a-C:H protective coatings: from process characterization to mass production (2015)
Cell proliferation on modified DLC thin films prepared by plasma enhanced chemical vapor deposition (2015)
Influence of pulse off time on temporal evolution of sputtered species densities in HIPIMS discharge (2015)
Influence of pulse off time on temporal evolution of sputtered species densities in a HiPIMS discharge (2015)
Spoke induced cathode voltage and discharge current oscillations in HiPIMS (2015)
NANOSTRUCTURED Mo-B-C COATINGS (2015)
OPTIMISATION OF MECHANICAL PROPERTIES OF NANOLAMINATE COATINGS (2015)
Temporal evolution of sputtered species densities in multi-pulse HiPIMS discharge (2015)
On the study of the mechanical properties of MoBC coatings (2015)
Cathode voltage and discharge current oscillations and spoke behavior during HiPIMS discharge (2015)
Spokes and cathode voltage and discharge current oscillations in HiPIMS (2015)
Reactive argon/acetylene HiPIMS discharge – time-resolved diagnostic of present species (2015)
Study of Ni doped nc-TiC/a-C(:H) coatings prepared by hybrid PVD-PECVD process (2015)
Plasma treatment of glass using dielectric barrier discharge and gliding arc (2015)
STUDY OF MECHANICAL PROPERTIES OF NANOSTRUCTURED POLYMER COATINGS PREPARED USING PLASMA ENHANCED CHEMICAL VAPOR DEPOSITION (2015)
Mechanical properties of polymer nanocomposite coatings prepared under dusty plasma conditions (2015)
CHARACTERISATION OF SURFACE AND BULK PROPERTIES OF POLYMER-LIKE THIN FILMS PREPARED USING PECVD ON VARIOUS SUBSTRATES (2015)
Protective double-layer coatings prepared by plasma enhanced chemical vapor deposition on tool steel (2015)
Surface activation of wood by plasma treatment (2015)
Spatially resolved and phase synchronized optical diagnostics of power modulated plasma jet (2015)
Tetrakis(trimethylsilyloxy)silane for nanostructured SiO2-like films deposited by PECVD at atmospheric pressure (2016)
COMPARISON OF STRUCTURE AND MECHANICAL PROPERTIES OF nc-TiC/a-C(:H) AND nc-(Ti,Ni)C/a-C(:H) COATINGS (2015)
Determination of titanium atom and ion densities in sputter deposition plasmas by optical emission spectroscopy (2015)
Structure and mechanical properties of Ni doped nc-TiC/a-C(:H) coatings (2015)
Effect of pulse off time on temporal evolution of sputtered species densities in multi-pulse HiPIMS discharge (2015)
Observation of cathode voltage and discharge current oscillations and spoke behaviour in HiPIMS (2015)
Deposition of Hard Yet Moderately Ductile MoBC Coatings by p-DC Magnetron Sputtering (2015)
Mechanical properties of atomic layer deposited Al2O3/ZnO nanolaminates (2015)
Mechanical properties of polymer nanocomposite coatings prepared under dusty plasma conditions (2015)
Improvement of glass wettability using Diffuse Coplanar Surface Barrier Discharge and gliding arc considering aging effect (2015)
Study of the mechanical properties and the microstructure of magnetron sputtered MoBC coatings (2015)
DEPOSITION OF HARD YET MODERATELY DUCTILE MoBC COATINGS BY PULSED-DC MAGNETRON SPUTTERING (2015)
Treatment of glass with different plasma discharges at atmospheric pressure (2014)
Gas mixing enhanced by power modulations in atmospheric pressure microwave plasma jet (2016)
Influence of deposition conditions on electrical and mechanical properties of Sm2O3-doped CeO2 thin films prepared by EB-PVD ( plus IBAD) methods. Relationship between investigated film and substrate at indentation (2015)
Functionalisation and pore size control of electrospun PA6 nanofibres using a microwave jet plasma (2015)
Plazmochemická modifikace jednovrstevných nátěrových hmot a jejich diagnostika (2015)
Výzkumná zpráva smluvního výzkumu v roce 2015 MU pro SHM (2015)
Report of contracted reserch results - MU for Platit, 2015 (2015)
Mo-B-C and Ta-B-C Nanostructured Layers with Promising Fracture Toughness (2016)
Study of the Local Mechanical Properties of Magnetron Sputtered Nanolaminate Coatings (2016)
GROWTH OF SILICON NANOWIRES BY THERMAL ANNEALING OF THICK GOLD CATALYTIC LAYER ON SILICON SUBSTRATE UNDER DIFFERENT ATMOSPHERES (2015)
Principles and practice of an automatic process control for the deposition of hard nc-TiC/a-C:H coatings by hybrid PVD-PECVD under industrial conditions (2016)
On the study of the mechanical properties of Mo-B-C coatings (2016)
gamma-Fe2O3 Nanopowders Synthesized in Microwave Plasma and Extraordinarily Strong Temperature Influence on Their Mossbauer Spectra (2016)
Atmospheric-pressure microwave torch discharge generated gamma-Fe2O3 nanopowder (2013)
Facile electrodeposition of superhydrophobic and oil-repellent thick layers on steel substrate (2016)
Ductile behavior of hard partially crystalline Mo2BC nanolaminate (2016)
Structure Reinforcement and Phase Change in nc-TiC/a-C:H Coatings Induced by HiPIMS (2016)
Study of the thermal stability of MoBC coatings (2016)
Preparation of Hard Yet Moderately Ductile Mo2BC Thin Films by Pulsed-DC Magnetron Sputtering (2016)
Behavior of spokes at different magnetic fields (2016)
NANOSTRUCTURED Mo-B-C COATINGS (2016)
Application of Plasma Treatment in the Nanofibers Processing (2016)
Magnetic field effect on spoke behaviour (2016)
Time resolved study of Ti sputtered species number densities in multi-pulse HiPIMS discharge (2016)
NITROGEN DOPED ORGANOSILICON PLASMA POLYMERS FOR BIOAPPLICATIONS (2016)
STUDY OF NITROGEN DOPED ORGANOSILICON PLASMA POLYMER THIN FILMS (2017)
Gas Sensing Properties of Carbon Nanomaterials (2016)
Simultaneous electrical and optical study of spoke rotation, merging and splitting in HiPIMS plasma (2017)
Nanostructured W-B-C coatings: synthesis and characterization (2016)
Pulsed-DC Magnetron Sputtering Process for Low Temperature Deposition of Hard Yet Moderately Ductile MoBC Coatings (2016)
Electron density in amplitude modulated microwave atmospheric plasma jet as determined from microwave interferometry and emission spectroscopy (2017)
Development of deposition process for growth of titanium/carbon coatings at laborato ry and industrial scale (2016)
Superhard nanocomposite nc-TiC/a-C:H coatings: The effect of HiPIMS on coating microstructure and mechanical properties (2017)
Study of Fracture Resistance of Nanolaminate Coatings Using Indentation and Impact Tests (2017)
W-B-C Nanostructured Layers - Microstructure and Mechanical Properties (2017)
Synthesis of Graphene Sheets using Microwave Plasma Torch Discharge (2016)
Microwave plasma synthesis of iron oxide nanoparticles and their applications (2016)
Carbon Nanotubes Grown by Microwave Torch for Ammonia Gas Detection (2016)
Investigation of ammonia gas sensing properties of graphite oxide (2016)
Investigation of Pristine Graphite Oxide as Room-Temperature Chemiresistive Ammonia Gas Sensing Material (2017)
On the significance of running-in of hard nc-TiC/a-C:H coating for short-term repeating machining (2017)
Structural properties and corrosion resistance of tantalum nitride coatings produced by reactive DC magnetron sputtering (2016)
Thermal stability of hard nanocomposite Mo-B-C coatings (2017)
Batch processing of overlapping molecular spectra as a tool for spatio-temporal diagnostics of power modulated microwave plasma jet (2017)
Výzkumná zpráva Platit a.s. za spolupráci v roce 2016 - 3103/0006/16 - příprava a analýza tenkých vrstev (2016)
Výzkumná zpráva SHM s.r.o. za spolupráci v roce 2016 - 3103/0007/15 - příprava a analýza tenkých vrstev (2016)
Výzkumná zpráva FEI Czech Republic za spolupráci v roce 2016 - 3119/0012/15 - příprava a analýza tenkých vrstev (2016)
Hafnium oxide thin films as a barrier against copper diffusion in solar absorbers (2017)
Cathode voltage and discharge current oscillations in HiPIMS (2017)
Investigation of the Influence of Ni Doping on the Structure and Hardness of Ti-Ni-C Coatings (2017)
Temporal evolution of Ti sputtered species number densities in multi-pulse HiPIMS process (2017)
The Study of Spoke Merging and Splitting in HiPIMS Plasma (2017)
HiPIMS and Ni Doping Induced Structure Reinforcement and Phase Change in nc-TiC/a-C:H Coatings (2017)
Ductile Behavior of Hard MoBC and WBC Nanolaminates (2017)
Ti atom and Ti ion number density evolution in standard and multi-pulse HiPIMS (2017)
Silicon Oxide Films: Plasma Assisted Formation of Nanostructures from Glass to Organic Polymers (2016)
Study of spoke rotation, merging and splitting in HiPIMS plasma (2017)
The influence of gas admixtures on the synthesis of graphene nanosheets in argon microwave plasma torch discharge (2017)
High-Performance Ammonia Gas Sensors Based on Plasma Treated Carbon Nanostructures (2017)
Theory-guided design of novel Fe-Al-based superalloys (2017)
Tribological properties of W-B-C protective coatings prepared by pulsed DC magnetron sputtering (2017)
Spokes occurrence in HiPIMS discharge at different magnetic field strengths (2017)
Transition from spokes into a homogeneous plasma in HiPIMS discharge (2017)
Properties of WBC coatings prepared by magnetron sputtering from industrial segmented target (2017)
Feasibility study of WBC synthesis from segmented magnetron target (2017)
Nanocomposite nc-TiC/a-C:H Coatings: Enhancement of Coating Properties by Utilization of HiPIMS and Ni Doping (2017)
Dynamic impact resistance of nc-TiC/a-C:H coatings prepared by DCMS and HiPIMS (2017)
Microstructure and mechanical properties of nanostructured W-B-C coatings prepared by magnetron sputtering (2017)
Report on spoke rotation, merging and splitting in HiPIMS plasma (2017)
Evolution of sputtered species densities in HiPIMS process with acetylene gas (2017)
Impact of Sputtered Species Ionization on Hysteresis Curve Shape – Model and Experiment (2017)
Spoke rotation, merging and splitting in HiPIMS plasma (2017)
Evolution of Titanium Atom and Ion Density in Reactive HiPIMS - Impact on Hysteresis Curve Shape (2017)
Titanium Atom and Ion Number Density Evolution in Reactive HiPIMS (2017)
The Influence of Curing Methods on the Physico-chemical Properties of Printed Mesoporous Titania Patterns Reinforced By Methylsilica Binder (2018)
Výzkumná zpráva smluvního výzkumu v roce 2017 – Masarykova univerzita pro SHM s.r.o. (2017)
Research report of contracted research in 2017 - Masaryk University for Platit a.s. (2017)
Atmospheric dry hydrogen plasma reduction of inkjet-printed flexible graphene oxide electrodes (2018)
Magnetron sputtered W-B-C coatings (2017)
Structural and Mechanical Behavior of W-B-C Coatings Produced by Magnetron Sputtering (2017)
Evolution of structure and mechanical properties of hard yet fracture resistant WBC coatings with varying C/W ratio (2018)
Characterization of Ta-B-C nanostructured hard coatings (2017)
Metal-boron-carbon Based Coatings-novel Material with High Hardness and Fracture Resistance (2018)
Carbon nanotubes synthesis and potential applications (2017)
Fracture Resistance Enhancement in Hard Mo-B-C Coatings Tailored by Composition and Microstructure (2018)
On the effect of the substrate to target position on the properties of titanium carbide/carbon coatings (2017)
Effect of magnetic field on spoke behaviour in HiPIMS plasma (2018)
Plasma diagnostics during microwave plasma synthesis of graphene nanosheets (2018)
Study of cavitation in liquid water under the action of inhomogeneous pulsed electric fields: application to sub-nanosecond electrical breakdown (2018)
Tribological properties of WBC protective coatings prepared by magnetron sputtering (2018)
Novel coatings with high hardness and fracture resistance based on metal-carbon-boron design (2018)
Magnetron sputtered hard and fracture resistant metal-boron-carbon based coatings (2018)
The role of applied bias on the properties of HiPIMS deposited nc-TiC/a-C:H coatings (2018)
Influence of Ti interlayer to adhesion and dynamic wear resistance of nc-TiC/a-C:H coatings prepared by DCMS and HiPIMS (2018)
Nanoindentation Testing on Mo-B-C Micropillars Prepared by Focused Ion Beam Milling (2018)
W-B-C hard yet ductile coatings prepared by High Power Impulse Magnetron Sputtering (2018)
Titanium Atom and Ion Number Density Evolution in Reactive High Power Impulse Magnetron Sputtering (2018)
Space-resolved evolution of sputtered species number densities in HiPIMS and DCMS discharge (2018)
On the origin of the mechanical properties of W-B-C coatings with different W content (2018)
Determination of the deposition and energy fluxes in industrial deposition system (2018)
Synthesis and Characterization of Multicomponent Nitrides in the Al-Cr-NbY-Zr System (2018)
STUDY OF MECHANICAL PROPERTIES OF NANOLAYERED TI/NI COATINGS (2018)
The tribological properties of short range ordered W-B-C protective coatings prepared by pulsed magnetron sputtering (2019)
Enhanced Ammonia Adsorption on Directly Deposited Nanofibrous Carbon Films (2018)
Use of the Richardson extrapolation in optics of inhomogeneous layers: Application to optical characterization (2018)
Technologie pro depozici materiálu magnetronovým naprašováním (2018)
Effect of bonding structure on hardness and fracture resistance of W-B-C coatings with varying B/W ratio (2019)
Optical spectroscopy as a tool for visualization of sputtering plasma dynamics (2018)
Souhrnná výzkumná zpráva pro depozici magnetronem (2018)
Influence of chemical composition on structure and mechanical properties of W-B-C coating deposited in industrial sputtering system (2018)
The statistics of spoke configurations in HiPIMS discharges (2019)
SELF-ORGANIZATION IN MICROWAVE FILAMENTARY DISCHARGES (2018)
Evolution of discharge parameters and sputtered species ionization in reactive HiPIMS with oxygen, nitrogen and acetylene (2019)
Electrochemical properties of graphene nanosheets synthesized in microwave plasma torch discharge (2018)
Structure, mechanical and tribological properties of hard yet tough W-B-C coatings as a function of their chemical composition (2019)
Study of self-organization in HiPIMS plasma, spoke merging and splitting (2019)
Soustava s ultrahydrofobními vlastnostmi (2018)
Preparation of superhydrophobic biodegradable carnauba wax layers on paper substrate (2018)
Study of Local Mechanical Properties of Fe78Al22 Alloy (2018)
Structural and Mechanical Properties of Nanostructured C-Ag Thin Films Synthesized by Thermionic Vacuum Arc Method (2018)
ENVIRONMENTAL STABILITY OF NITROGEN CONTAINING PLASMA-POLYMERIZED HEXAMETHYLDISILOXANE FILMS (2018)
On the origin of multilayered structure of W B C coatings prepared by non reactive magnetron sputtering from a single segmented target (2019)
Preparation of Hard Yet Fracture Resistant W-B-C Coatings Using High Power Impulse Magnetron Sputtering (2019)
Statistical examination of spoke evolution in HiPIMS (2019)
Titanium Atom and Ion Number Density Evolution in Reactive HiPIMS with Oxygen‚ Nitrogen and Acetylene Gas (2019)
Fast camera imaging and strip probe measurements of spokes in HiPIMS plasma (2019)
Different types of HiPIMS discharges: a comparative study via time-resolved particle imaging (2019)
On the interplay between plasma discharge instability and formation of free-standing graphene nanosheets in a dual-channel microwave plasma torch at atmospheric pressure (2019)
Optical Characterization of Non-Stoichiometric Silicon Nitride Films Exhibiting Combined Defects (2019)
Study of W-B-C thin films prepared by magnetron sputtering using a combinatorial approach (2019)
Mechanical properties of hard and moderately ductile X2BC coatings (2019)
On the origin of multilayered structure of W-B-C coatings prepared by non-reactive magnetron sputtering from a single segmented target (2019)
Effects of additives on atmospheric pressure gliding arc applied to the modification of polypropylene (2019)
Influence of molecular admixtures on filamentation in microwave plasma torch (2019)
Optical emission spectroscopy of gas mixing process during graphene nanosheets synthesis by dual channel microwave plasma torch at atmospheric pressure (2018)
Fast Surface Hydrophilization via Atmospheric Pressure Plasma Polymerization for Biological and Technical Applications (2019)
Microstructural changes of amorphous Mo–B–C coatings upon thermal annealing (2019)
The Effect of Uncoated SPIONs on hiPSC-Differentiated Endothelial Cells (2019)
On ionization fraction of sputtered species (2019)
Adhesion and dynamic impact wear of nanocomposite TiC-based coatings prepared by DCMS and HiPIMS (2020)
Proceedings of 46th EPS Conference on Plasma Physics: Determination of electron density in microwave plasma torch by microwave interferometry (2019)
Approximate methods for the optical characterization of inhomogeneous thin films: Applications to silicon nitride films (2019)
Sputtered Species Ionisation and Hysteresis Behaviour of Reactive High Power Impulse Magnetron Sputtering (2019)
Electrodeposited metal matrix composite layers reinforced by plasma activated Al2O3 and WC ceramic powders (2019)
Multi-component (Al,Cr,Nb,Y,Zr)N thinfilms by reactive magnetron sputter deposition for increased hardness and corrosion resistance (2020)
Gas phase synthesis of graphene nanosheets in microwave plasma torch at atmospheric pressure and their properties (2018)
Investigation of growth mechanism of graphene nanosheets in microwave plasma torch at atmospheric pressure and their properties (2019)
Study of graphene layer growth on dielectric substrate in microwave plasma torch at atmospheric pressure (2019)
Influence of sputtered species ionisation on the hysteresis behaviour of reactive HiPIMS with oxygen admixture (2020)
Temporal evolution of sputtered species number densities in reactive HiPIMS with nitrogen admixture (2019)
The effect of chemical composition on the structure, chemistry and mechanical properties of magnetron sputtered W-B-C coatings: Modeling and experiments (2020)
Atmospheric Pressure Plasma Polymerized Oxazoline-Based Thin Films-Antibacterial Properties and Cytocompatibility Performance (2019)
Synthesis and properties of free-standing graphene nanosheets at atmospheric pressure conditions (2018)
Atmospheric Pressure Microwave Plasma Torch Synthesis of Free-Standing Graphene Nanosheets (2018)
Influence of plasma discharge instability on the synthesis of graphene nanosheets in dual-channel microwave plasma torch at atmospheric pressure (2019)
Graphene nanosheet synthesis by oxygen and hydrogen enriched decomposition of ethanol in microwave plasma torch discharge (2019)
Optical characterization of inhomogeneous thin films containing transition layers using the combined method of spectroscopic ellipsometry and spectroscopic reflectometry based on multiple-beam interference model (2019)
Spectroscopic ellipsometry of inhomogeneous thin films exhibiting thickness non-uniformity and transition layers (2020)
Influence of admixtures on atmospheric pressure microwave plasma torch used for graphene nanosheets synthesis (2019)
Combined theoretical and experimental study of Fe-Al-based nanocomposites (2018)
Souhrnná výzkumná zpráva pro depozici napařováním (2019)
Technologie pro depozici materiálu napařováním (2019)
Time-resolved imaging of sputtered particles in multi-pulse HiPIMS discharge (2019)
Spoke behaviour in reactive HiPIMS (2019)
Optimization and influence of pillar shape on micro-compression tests results (2018)
Elasticity of Phases in Fe-Al-Ti Superalloys: Impact of Atomic Order and Anti-Phase Boundaries (2019)
Sputtered titanium species dynamics in HiPIMS (2020)
Ionised density fraction of sputtered species in HiPIMS discharge excited in argon/acetylene gas mixture (2020)
Evolution of ionization fraction of sputtered species in standard, multi-pulse and reactive HiPIMS (2020)
Effect of nitrogen on sputtered species number densities evolution in reactive HiPIMS (2020)
Behaviour of spokes in reactive HiPIMS (2020)
GRAPHENE NANOSHEETS SYNTHESIZED IN MICROWAVE PLASMA AND LIQUID EXFOLIATED GRAPHENE: STRUCTURAL CHARACTERIZATION STUDY (2019)
Modeling the influence of roughness on nanoindentation data using finite element analysis (2019)
Strength of hydrogen-free and hydrogen-doped Ni50Ti50 shape memory platelets (2019)
Fast mechanical model for probe-sample elastic deformation estimation in scanning probe microscopy (2019)
ORGANOSILICON PLASMA POLYMERS BASED ON TRIMETHYLSILYL ACETATE MONOMER (2019)
PREPARATION OF PPHMDSO THIN FILMS IN CAPACITIVELY COUPLED RF GLOW DISCHARGES UNDER DUSTY PLASMA CONDITIONS (2018)
UNCERTAINTY ANALYSIS OF AREA CALIBRATION IN NANOINDENTATION (2018)
CHARACTERIZATION OF MO-B-C NANOSTRUCTURED COATING MICROSTRUCTURE BY MEANS OF AEM AND GDOES (2017)
MICROWAVE INTERFEROMETRY OF ATMOSPHERIC PRESSURE PLASMA JET (2016)
STUDY OF SURFACE PROPERTIES OF THE PLASMA-TREATED HIGH DENSITY POLYETHYLENE (2016)
Quantum-mechanical study of Fe-Al-based intermetallic compounds (2019)
Přírodovědecká fakulta MU proti COVID-19: výroba nanovlákenných filtrů do dobrovolnicky šitých roušek (2020)
Study of the transition from self-organised to homogeneous plasma distribution in chromium HiPIMS discharge (2020)
Influence of substrate material on plasma in deposition/sputtering reactor: experiment and computer simulation (2008)
Thermal stability of fracture-resistant W-B-C coatings (2019)
Ionisation fractions of sputtered titanium species at target and substrate region in HiPIMS (2020)
Optical spectroscopy for sputtering process characterization (2020)
Magnetic Properties of gamma-Fe2O3 Nanopowder Synthesized by Atmospheric Microwave Torch Discharge (2012)
ELECTROCHEMICAL PROPERTIES OF CNT'S MODIFIED MICROELECTRODES (2011)
The Effect of a Taper Angle on Micro-Compression Testing of Mo-B-C Coatings (2020)
Effect of substrate bias voltage on the composition, microstructure andmechanical properties of W-B-C coatings (2020)
PERSPECTIVE CARBON MATERIALS AS ELECTRON EMITTERS (2014)
Optimization of TiO2 Mesoporous Photoanodes Prepared by Inkjet Printing and Low-Temperature Plasma Processing (2020)
Revisiting particle dynamics in HiPIMS discharges. I. General effects (2020)
Revisiting particle dynamics in HiPIMS discharges. II. Plasma pulse effects (2020)
Study of graphene layer growth on dielectric substrate in microwave plasma torch at atmospheric pressure (2020)
Preparation of Freestanding Carbon Nanotubes Using Plasma Enhanced Chemical Vapor Deposition (2011)
A transition from petal-state to lotus-state in AZ91 magnesium surface by tailoring the microstructure (2020)
Mossbauer Effect Study of Iron Thin Films on Si/SiOx Substrate and Iron Phases at Deposited Carbon Nanotubes (2010)
Development of plasma enhanced chemical vapor deposition reactor for preparation of oxygen containing organosilazane polymer thin films (2020)
Study of nanostructured plasma-polymer thin films growth under dusty plasma conditions (2020)
A comparative study of sioxcyhz thin films deposited in trimethysilyl ACETATE/O2/Ar plasmas (2020)
Properties of MgAl2O4 doped alumina barrier layers for dielectric barrier discharge (2020)
Deposition of organosilicon coatings from trimethylsilyl acetate and oxygen gases in capacitively coupled RF glow discharge (2020)
Composition, Structure and Mechanical Properties of Industrially Sputtered Ta-B-C Coatings (2020)
Ellipsometric characterization of highly non-uniform thin films with the shape of thickness non-uniformity modeled by polynomials (2020)
Determining shape of thickness non-uniformity using variable-angle spectroscopic ellipsometry (2020)
The effect of ambient air plasma generated by coplanar and volume dielectric barrier discharge on the surface characteristics of polyamide foils (2021)
Robust current peak detection method for dielectric barrier discharges (2021)
Atmospheric Pressure Plasma Polymerized 2-Ethyl-2-oxazoline Based Thin Films for Biomedical Purposes. (2020)
Characterization of Platinum-Based Thin Films Deposited by Thermionic Vacuum Arc (TVA) Method (2020)
Ellipsometric characterization of inhomogeneous thin films with complicated thickness non-uniformity: application to inhomogeneous polymer-like thin films (2020)
Diagnostics of reactive magnetron sputtering (2010)
Fabrication of Al-Si/Mg2Si in-situ composite by friction stir processing (2021)
The role of microwave plasma temperature during graphene nanosheets deposition on dielectric substrate: Modelling and experiment (2020)
Influence of electron beam irradiation on physical properties of microwave plasma synthesized graphene nanosheets (2020)
Electron concentration in the non-luminous part of the atmospheric pressure filamentary discharge (2021)
Local mechanical properties of advanced skutterudites processed by various routes (2019)
Controlled high temperature stability of microwave plasma synthesized graphene nanosheets (2021)
Optics of Inhomogeneous Thin Films with Defects: Application to Optical Characterization (2021)
Zařízení pro zvýšení depoziční rychlosti HiPIMSu použitím balíčků pulzů (2020)
Effect of plasma sizing on basalt fibers adhesion with wood-working resins (2021)
Rapid Atmospheric Pressure Ambient Air Plasma Functionalization of Poly(styrene) and Poly(ethersulfone) Foils (2021)
Impact of atmospheric pressure plasma treatment on surface metallization of CFRP composites (2021)
Spatial-resolved optical emission spectroscopy of the spoke in non-reactive HiPIMS (2021)
Dynamic impact wear and impact resistance of W-B-C coatings (2020)
Thermal stability of Ti/Ni multilayer Thin films (2021)
Large area cleaning and activation of flexible ultra-thin glass by non-thermal atmospheric-pressure plasma (2021)
Constitutive equations describing optical activity in theory of dispersion (2021)
Single-Shot Spatially Resolved Optical Emission Spectroscopy of Plasma Species within the Spoke (2021)
Low‐Temperature and Rapid Deposition of an SnO2 Layer from a Colloidal Nanoparticle Dispersion for Use in Planar Perovskite Solar Cells (2021)
The single-shot spatial-resolved OES of the spoke in non-reactive HiPIMS (2021)
The Industrially Deposited W-B-C Coatings from Segmented Target (2021)
Electron-neutral bremsstrahlung radiation fingerprints the initial stage of nanosecond discharge in liquid water (2021)
Protokol o ověření technologie pro Plazmatem asistovanou úpravu nanovláken pro filtrační účely (2021)
Structure of microwave plasma-torch discharge during graphene synthesis from ethanol (2021)
Spoke behaviour in reactive HiPIMS (2021)
Výzkumná zpráva smluvního výzkumu Nanohybrid I (2021)
Výzkumná zpráva smluvního výzkumu Nanohybrid II. (2021)
On the transition of reaction pathway during microwave plasma gas-phase synthesis of graphene nanosheets: From amorphous to highly crystalline structure (2021)
Stability of trimethylsilyl acetate-based plasma polymers towards atmospheric and water environments (2021)
On electron acceleration in liquid ruptures caUsed by electrostrictive forces (2021)
The effect of nanovoid elongation on electron multiplication during (sub)nanosecond electrical breakdown (2021)
Simulation and diagnostics of plasmachemical processes during microwave plasma synthesis of graphene nanosheets from ethanol (2021)
Electron multiplication and avalanching in nanovoids at the initial stage of nanosecond discharge in liquid water (2021)
Organosilicon plasma polymers deposited in trimethylsilyl acetate/CH4 plasma of capacitively coupled RF glow discharge (2021)
Introducing force traceability to nanoindentation measurements (2021)
Characterization of edge structure and misorientation between layers of microwave plasma synthesized few-layer graphene nanosheets (2021)
AFM characterization of nanocomposite SAMPLES (2021)
Verification of Nanoindentation Devices Using Atomic Force Microscopy (2020)
Characterisation of Escherichia coli isolated from Antarctic animals (2021)
Enhancing mechanical properties and cutting performance of industrially sputtered AlCrN coatings by inducing cathodic arc glow discharge (2021)
Microstructure of titanium coatings controlled by pulse sequence in multipulse HiPIMS (2021)
Stable filamentary structures in atmospheric pressure microwave plasma torch (2021)
Výzkumná zpráva smluvního výzkumu Nanohybrid III. (2021)
Microwave plasma-based high temperature dehydrogenation of hydrocarbons and alcohols as a single route to highly efficient gas phase synthesis of freestanding graphene (2021)
HARD AND FRACTURE RESISTANT METAL-BORON-CARBON BASED COATINGS DEPOSITED BY INDUSTRIAL SPUTTERING SYSTEM (2019)
Výzkumná zpráva 6/2020 TiZrN a TiTaN (2020)
WBC a TaBC (2019)
OVĚŘENÁ TECHNOLOGIE - Průmyslová příprava WBC vrstev (2021)
OVĚŘENÁ TECHNOLOGIE - Průmyslová příprava TiZrN vrstev (2021)
Optimisation of the DCSBD roll-to-roll treatment of LLDPE/PA tubular foil using rollers of different electrical resistance (2021)
Atmospheric-pressure plasma treatment of ultra-thin flexible glass for deposition of conductive layers (2021)
Surface modification of PTFE by atmospheric pressure plasma (2021)
RF plasma nozzle for analytical chemistry (2021)
Selection of special dielectric substrates for electrostatic voltage measurement (2021)
Higher harmonic frequencies in a capacitively coupled plasma (2021)
Application of synthesized porous 3D graphene structure for electrochemical hydrogen storage (2021)
Single-shot spatial-resolved optical emission spectroscopy of argon and titanium species within the spoke (2022)
The effect of processing parameters on magnetic properties of an epoxy resin-bonded isotropic Nd-Fe-B magnet (2021)
On the Structure and Mechanical Properties of X2BC Coatings Prepared by High Power Impulse Magnetron Sputtering at Different Temperatures (2021)
Chemical shift in W-B-C systems: experiments and modeling (2021)
W-B-C coatings: microstructural nuances revealed by atomistic modelling (2020)
Phase formation, thermal stability and mechanical properties of Nb-B-C thin films prepared by magnetron sputtering using a combinatorial approach (2021)
Dynamics of the titanium ground state atoms and ions in HiPIMS discharge (2021)
Temporal studies of titanium ionised density fraction in reactive HiPIMS with nitrogen admixture (2021)
Investigation of ionized density fraction in reactive HiPIMS (2021)
Time-resolved sputtered species number density in Ar/N2 HiPIMS (2021)
Characterization of randomly rough surfaces using angle-resolved scattering of light and atomic force microscopy (2021)
Corrigendum: Interaction of an atmospheric pressure plasma jet with grounded and floating metallic targets: simulations and experiments (2020 Plasma Sources Sci. Technol.29 095011) (2021)
Comparison of HMDSO and HMDSZ thin films growth under dusty plasma conditions (2021)
UVA and solar driven photocatalysis with rGO/TiO2/polysiloxane for inactivation of pathogens in recirculation aquaculture systems (RAS) streams (2022)
Investigation of spokes in reactive HiPIMS using Ar/N2 atmosphere (2021)
Investigation of spokes in reactive Ar/N2 atmosphere (2021)
Physical properties of {Ti,Zr,Hf}(2)Ni2Sn compounds (2022)
Quantification of surface charging memory effect in ionization wave dynamics (2022)
Phase formation, thermal stability and mechanical properties of Nb-B-C coatings prepared by combinatorial magnetron sputtering (2022)
Dynamics of bipolar HiPIMS discharges by plasma potential probe measurements (2022)
Electric signals measured during plasma thin-film etching and their connection to the electron concentration and the properties of the treated surface (2022)
Ověřená technologie dekontaminace odpadních vod kombinovaným hybridním reaktorem pro vybrané modelové kontaminanty (2021)
Zařízení pro úpravu kapalin, zejména pro testování vícenásobného oxidačního procesu čištění vodyombinovaný oxidační proces (2021)
Zařízení pro výrobu desinfikantu z pitné nebo surové vody (2021)
Ověřená technologie výroby tvarovky s komponentou s alternativní kovovou vrstvou (2021)
Roll-to-roll cleaning and activation of ultra-thin flexible glass using atmospheric-pressure plasma in ambient air (2021)
Optical characterization of inhomogeneous thin films with randomly rough boundaries (2022)
Dynamics of macro- and micro-bubbles induced by nanosecond discharge in liquid water (2022)
Synthesis and characterization of Ta–B–C coatings prepared by DCMS and HiPIMS co-sputtering (2022)
W 4f electron binding energies in amorphous W-B-C systems (2022)
Quantitation of Human 14-3-3ζ Dimerization and the Effect of Phosphorylation on Dimer-monomer Equilibria (2022)
Caviplasma: A new method of dispersing fine particles in water-based solutions (2021)
Výzkumná zpráva-studie obsahující: propustnost, mechanické vlastnosti, vlastnosti vůči zvýšené chemické, i fyzikální zátěži (2021)
Experimentální studie uvolňování iontů z kovových zálisků používaných v plastových rozvodech vody (2021)
Kombinované tvarovky s kovem - série vzorků s alternativní povrchovou úpravou (2021)
Sestavení a konstrukce zařízení pro jednotlivé oxidační procesy (kavitace + plazma, ozonizace, katalýza s odpovídající kapacitou + diagnostika) (2021)
Morphology of positive ionization waves in atmospheric pressure air: influence of electrode set-up geometry (2021)
Studie mechanických vlastností připravených vrstev (2020)
Predicting the composition of W-B-C coatings sputtered from industrial cylindrical segmented target (2022)
Spatially resolved study of spokes in reactive HiPIMS discharge (2022)
Electrodeposition of Calcium Phosphate Coatings on Metallic Substrates for Bone Implant Applications: A Review (2022)
Evaluation of electrochemical hydrogen storage capability of three-dimensional nano-structured nitrogen-doped graphene (2022)
Industrial Deposition of W-B-C Coatings: Properties and Process Modelling (2022)
Mapping the X-B-C Systems: Search for the Elusive X2BC Phase (2022)
Rotating spokes in reactive HiPIMS process measured by spatially resolved OES (2022)
Modelling of dcMS and HiPIMS process with hydrocarbon gas admixture (2022)
Analysis of secondary emission mechanism in electron avalanches propagating in cylindrical nanoruptures in liquid water (2022)
Physics of plasma jets and interaction with surfaces: review on modelling and experiments (2022)
Higher harmonic frequencies of discharge voltage and current in a capacitively coupled plasma (2022)
Photocatalytic water treatment by nanocomposites processed using low temperature plasma (2022)
Dry cleaning and activation of flexible glass using nonthermal plasma before PEDOT:PSS coating (2022)
Adhesion improvement of large area flexible PTFE foils by atmospheric pressure plasma (2022)
The wide range optical spectrum characterization of the silicon and oxygen doped diamond like carbon inhomogeneous thin films (2022)
Investigation of spokes in reactive Ar/N2 atmosphere using HiPIMS (2022)
Synthesis and characterization of the ceramic refractory metal high entropy nitride thin films from Cr-Hf-Mo-Ta-W system (2022)
Alumina ceramic tapes doped by various dopants and their effect on properties of coplanar dielectric barrier discharge (2022)
Properties of Cr-doped Al2O3 as a dielectric barrier layer (2022)
On the gas-phase graphene nanosheet synthesis in atmospheric microwave plasma torch: Upscaling potential and graphene nanosheet‑copper nanocomposite oxidation resistance (2023)
An Assessment of the Bactericidal and Virucidal Properties of ZrN-Cu Nanostructured Coatings Deposited by an Industrial PVD System (2022)
Influence of the argon ratio on the structure and properties of thin films prepared using PECVD in TMSAc/Ar mixtures (2023)
Growth Mechanism And Functional Properties Of Gas-Phase Synthesized Few-Layer Graphene (2021)
Industrially deposited hard and damage resistant W-B-C coatings (2023)
Optical characterization of inhomogeneous thin films with randomly rough boundaries exhibiting wide intervals of spatial frequencies (2022)
Nanocrystalline TiO2/Ti3C2Tx MXene composites with a tunable work function prepared using atmospheric pressure oxygen plasma (2023)
MAGNETRON SPUTTERING DEPOSITION OF HIGH ENTROPY NITRIDES FROM CHROMIUM-HAFNIUM-MOLYBDENUM-TANTALUM-WOLFRAM SYSTEM (2021)
AL2O3-TA2O5 MULTILAYER THIN FILMS DEPOSITED BY PULSED DIRECT CURRENT MAGNETRON SPUTTERING FOR DIELECTRIC APPLICATIONS (2021)
STUDY OF W-X BONDS IN AMORPHOUS W-B-C (2021)
Adhesion improvement on the inner side of LLDPE/PA tubular film exposed to DCSBD roll-to-roll plasma system from the outer side of the film (2023)
Multilayer thin films of aluminum oxide and tantalum oxide deposited by pulsed direct current magnetron sputtering for dielectric applications (2023)
Phase formation of powders sputtered from X2BC targets and XC+XB powder mixtures {X = Nb, Ta, W} (2023)
Dynamic Impact Resistance and Scratch Adhesion of AlCrN Coatings Sputtered Using Cathodic Arc Glow Discharge (2023)
INDUSTRIAL MAGNETRON SPUTTERING OF ZRN/CU NANOSTRUCTURED COATINGS FOR ANTI-BACTERIAL PURPOSES (2021)
Vysoceodrazná vrstva na substrátu ve specifikaci R >= 98,5 % @ 248 nm a R >= 98 % @ 213 nm pro úhel dopadu 45. (2021)
Plazmochemická jednotka pro výrobu desinfekce z vody (2021)
Funkční zařízení pro hybridní kombinovaný oxidační proces (2021)
Describing the multipulse HiPIMS deposition (2023)
Dynamics of sputtered particles in multipulse HiPIMS discharge (2023)
Optical Characterization of Inhomogeneous Thin Films Deposited onto Non-Absorbing Substrates (2023)
Bioactive Calcium Phosphate Coatings for Bone Implant Applications: A Review (2023)
Atmospheric-pressure air plasma sources for cleaning and activation of float soda-lime glass: Effects and comparison (2023)
Ab initio-guided X-ray photoelectron spectroscopy quantification of Ti vacancies in Ti1-dOxN1-x thin films (2022)
Bond formation at polycarbonate | X interfaces (X = Ti, Al, TiAl) probed by X-ray photoelectron spectroscopy and density functional theory molecular dynamics simulations (2022)
Oxidation resistance and mechanical properties of sputter-deposited Ti0.9Al0.1B2-y thin films (2022)
Synthesis and oxidation behavior of Ti0.35Al0.65By (y=1.7-2.4) coatings (2022)
Influence of ion irradiation-induced defects on phase formation and thermal stability of Ti0.27Al0.21 N (0.52) coatings (2022)
Temporal, spatial and spectroscopic study of plasma emission on Cu target in bipolar HiPIMS (2023)
Thermally-activated catalysis on CuNi nanoparticles (2023)
Comparative investigation of BOPP foil surface treatment using various atmospheric-pressure plasma sources (2023)
Rapid, low-temperature, air plasma sintering of mesoporous titania electron transporting layers in perovskite solar cells (2023)
CR-DOPED ALUMINA CERAMICS AND THEIR PROPERTIES (2023)
RECENT DEVELOPMENTS IN ELECTRONICS FOR DBD AND MEASUREMENTS (2023)
NEW LOW TEMPERATURE ATMOSPHERIC PLASMA SOURCE FOR REMOTE PLASMA SURFACE MODIFICATION OF MATERIALS (2023)
ATMOSPHERIC PLASMA TECHNOLOGY FOR LARGE AREA MODIFICATION OF FLOAT GLASS AND POLYMER INTERLAYERS FOR LAMINATED GLASS (2023)
EFFECTS OF AMBIENT AIR PLASMA ON FLEXIBLE GLASS BEFORE DEPOSITION OF PEDOT:PSS THIN FILMS: IN-DEPTH XPS ANALYSIS (2023)
LOW-COST BIOCHAR SORBENTS FOR ELIMINATING PHARMACEUTICALS AND DRUGS FROM WASTEWATERS (2023)
COMPARATIVE STUDY OF DIFFERENT ATMOSPHERIC-PRESSURE PLASMA SOURCES FOR SURFACE TREATMENT OF BOPP FOIL (2023)
CHALLENGES IN CREATING FUNCTIONAL LAYERS THROUGH ATMOSPHERIC PRESSURE PLASMA POLYMERIZATION (2023)
LOW-TEMPERATURE ATMOSPHERIC PRESSURE PLASMA CROSSLINKING OF POLYSILAZANES COATING (2023)
On the determination of the thermal shock parameter of MAX phases: A combined experimental-computational study (2023)
Correlative Theoretical and Experimental Study of the Polycarbonate | X Interfacial Bond Formation (X = AlN, TiN, (Ti,Al)N) During Magnetron Sputtering (2023)
NOMAD: A distributed web-based platform for managing materials science research data (2023)
Matching Low Viscosity with Enhanced Conductivity in Vat Photopolymerization 3D Printing: Disparity in the Electric and Rheological Percolation Thresholds of Carbon-Based Nanofillers Is Controlled by the Matrix Type and Filler Dispersion (2023)
Synthesis and characterization of the ceramic refractory metal high entropy nitride and carbide thin films from Cr-Hf-Mo-Ta-W system (2023)
Zirconium-based thin film metallic glasses prepared by magnetron sputtering (2023)
Adhesion improvement of PTFE and Ionoplast polymers by plasma surface modification using DCSBD and a new DCSBD-derived plasma systems (2023)
Roll-to-roll plasma treatment of tubular plastic casings treated from outer side with the effect on both sides (2023)
Plasma cleaning and activation of flexible glass before coating with PEDOT:PSS (2023)
Aluminum tantalum oxide thin films deposited at low temperature by pulsed direct current reactive magnetron sputtering for dielectric applications (2024)
Time and Energy-Resolved Investigation of the HiPIMS Discharge in Ar and Ar/N2 Atmospheres (2023)
On spokes in reactive Ar/N2 atmosphere using HiPIMS (2023)
Investigation of ionized metal flux fraction at industrial conditions (2023)
Novel Sputter Cathode Design to Obtain Very High Ionized Flux Fraction of Deposited Material in Industrial Conditions (2023)
Enhancing the ionized metal flux fraction in industrial conditions (2023)
NOVEL INDUSTRIAL SPUTTERING TECHNOLOGY WITH VERY HIGH IONIZED FLUX FRACTION OF DEPOSITED MATERIAL (2023)
Investigation of ionized metal flux fraction at industrial conditions (2023)
Plasma diagnostics of multi-pulse HiPIMS discharge (2022)
Search for proper conditions for deposition of X2BC coatings in Mo-B-C, W-B-C, Nb-B-C and Ta-B-C systems (2022)
Comparison of Plasma-Polymerized Thin Films Deposited from 2-Methyl-2-oxazoline and 2-Ethyl-2-oxazoline: I Film Properties (2023)
Influence of plasma instability on gas-phase synthesis of N-graphene in dual-channel microwave plasma torch at atmospheric pressure (2023)
Influence of the heat field instability on the efficiency of organic precursor decomposition in the dual-channel microwave plasma torch (2022)
Temperature-friendly remote atmospheric pressure plasma source for plasma activation of materials (2023)
Capturing photoionization shadows in streamer simulations using the discrete ordinates method (2023)
Testovací výbojová komora MUNI (2023)
Efficacy Comparison of Three Atmospheric Pressure Plasma Sources for Soybean Seed Treatment: Plasma Characteristics, Seed Properties, Germination (2023)
Ověřená technologie - prediktivní simulace ta-C procesu (2023)
Virtual fit and design improvements of a filtering half-mask for sub-adult wearers (2024)
Constitution, physical properties and thermodynamic modeling of the Hf-Mn system (2024)
Complex characterisation of Cr-doped α-Al 2O3 for DBD applications (2024)
PLASMA POLYMERIZATION: AN ALTERNATIVE METHOD OF FUNCTIONAL LAYER PREPARATION (2023)
Surface morphology of nanostructured plasma-polymer thin films deposited under dusty plasma conditions (2022)
Effect of Nb incorporation in Mo BC coatings on structural and mechanical properties — Ab initio modelling and experiment (2024)
In-situ observation of temperature dependent microstructural changes in HPT-produced p-type skutterudites (2024)
Sustainable remediation of paint factory wastewater using electrocoagulation (2024)
Modification of silicon-polyurethane-based sol–gel coatings through diverse plasma technologies: investigation of impact on surface properties (2024)
A Long-Term Study on the Bactericidal Effect of ZrN-Cu Nanostructured Coatings Deposited by an Industrial Physical Vapor Deposition System (2024)
Low-cost carbon-based sorbents for the removal of pharmaceuticals from wastewaters (2024)
Optical characterization of inhomogeneity of polymer-like thin films arising in the initial phase of plasma-enhanced chemical vapor deposition (2024)
Selective Cu electroplating enabled by surface patterning and enhanced conductivity of carbon fiber reinforced polymers upon air plasma etching (2024)
Synthesis and characterization of ceramic high entropy carbide thin films from the Cr-Hf-Mo-Ta-W refractory metal system (2024)
Spatially resolved optical emission analysis of spokes in HiPIMS utilising Al, Cr, Cu, Ti, and W targets (2024)
Prototyp optického prvku č. 1 s povrchovou úpravou (2023)
Synthesis and Characterization of High Entropy Ceramic Coatings from Cr-Hf-Mo-Ta-W Refractory Metal System (2024)
On the influence of strong- and weak-nitride forming elements on the preparation of refractory metal based high entropy nitrides by magnetron sputtering (2024)
High entropy alloys (FeCoNi) 0.75 Cr 0.25-x Cu x - thermal stability and physical properties (2024)
On direct-current magnetron sputtering at industrial conditions with high ionization fraction of sputtered species (2024)
Enhancement of ionized metal flux fraction without compromising deposition rate in industrial magnetron sputtering (2024)
Erratum: “Optical spectroscopy for sputtering process characterization” [J. Appl. Phys. 127, 211101 (2020)] (2024)
Development of a-C:H coatings doped with trimethylsilyl acetate prepared using plasma enhanced chemical vapor deposition (2024)
Investigation of the failure mechanisms of Zr alloy with Cr2AlC coatings using in-situ bending tests: Experiments and simulations (2024)
Floating potential probes for process control during reactive magnetron sputtering (2024)
Wide spectral range optical characterization of terbium gallium garnet (TGG) single crystal by universal dispersion model (2025)
Deposition of nanocomposite carbon-based thin films doped with copper and fluorine (2024)
Different Grain Sizes of MgAl2O4 Doped Alumina and Its Influence on SPD, CDBD, and APTD (2024)
Electrophoretic Deposition of Bioactive Glass Coatings for Bone Implant Applications: A Review (2024)
Determination of Optical and Structural Parameters of Thin Films with Differently Rough Boundaries (2024)
On the line intensity ratio for electric field measurement in dielectric barrier discharge in argon at atmospheric pressure (2024)
Advancing wastewater treatment: The efficacy of carbon-based electrochemical platforms in removal of pharmaceuticals (2024)
Odebrat vše z výběru
Operace s vybranými výsledky
Export a tisk
Seznam vybraných záznamů
Další aplikace
Publikace
Informační systém
Přeskočit na horní lištuPřeskočit na hlavičkuPřeskočit na obsahPřeskočit na patičku
