Přeskočit na horní lištu
Přeskočit na hlavičku
Přeskočit na obsah
Přeskočit na patičku
EN
>
Publikace
>
Vyhledávání publikací
Vyhledávání publikací
Pokročilé vyhledávání
Repozitář
Vybrané publikace/výsledky
Practical exercises in applied plasma chemistry (2001)
Deposition of polymer films in rf discharge at atmospheric pressure (2001)
Optical diagnostics of plasma channel burning at atmospheric presssure (2001)
Diagnostics of hf-plasma pencil in liquids (2001)
Diagnostics and Application of High Frequency Plasma Pencil (2001)
Advanced methods for deposition of thin films: monitoring, properties, application (2002)
Diagnostics of barier torch discharge burning at atmospheric pressure (2002)
ATMOSPHERIC PRESSURE DIFFUSE COPLANAR SURFACE DISCHARGE FOR SURFACE TREATMENT (2002)
Underwater pulse electrical diaphragm discharges for surface treatment of fibrous polymeric materials (2002)
Comparison of the barrier-torch discharge and torch discharge at atmospheric pressure (2002)
Electron concetration in atmospheric non-isotermal plasma jet (2002)
ATMOSPHERIC PRESSURE DIFFUSE COPLANAR SURFACE DISCHARGE FOR SURFACE TREATMENT (2002)
The Different Types of Dielectric Barrier Discharge in Gas Mixtures (2003)
Longitudinal emission diagnostics of plasma channel in rf barrier torch discharge (2003)
Diagnostics of plasma channel generated at atmospheric pressure in bipolar rf barrier torch discharge (2003)
Generation of Thin Surface Plasma Layers for atmospheric-Pressure surface Treatments (2003)
ROTATIONAL TEMPERATURE AS A TOOL FOR DIAGNOSTICS OF HF PLASMA CHANNEL BURNING AT ATMOSPHERIC PRESSURE (2003)
Application of non-standard plasma sources in spectroscopy and for surface treatment (2003)
Spectral diagnostics of diffuse cplanar surface discharge (2003)
Deposition of polymer films by rf plasma nozle at atmospheric pressure (2003)
DC CORONA-LIKE DIAPHRAGM DISCHARGE IN LIQUIDS (2003)
SPECTRAL AND ENERGY DIAGNOSTICS OF ALTERNATING (50 Hz) GLOW DISCHARGES UNDER ATMOSPHERIC PRESSURE (2003)
Electron concentration of barrier torch discharge in liquids (2003)
Plasma diagnostics of surface discharge at atmospheric pressure in nitrogen and organosilicon mixture (2003)
Comparison of the barrier - torch discharge and torch discharge at atmospheric pressure (2002)
Evaluation of Surface Properties of Reinforced Materials and Rubber Blends (2003)
Deposition of polymer films in diffuse coplanar surface discharge (2003)
Praktická ukázka nového konstrukčního řešení plazmové tužky (2003)
Deposition of polymer films by rf discharge at atmospheric pressure (2004)
Diagnostics of surfatron-generated plasma by probe measurements and emission spectroscopy (2004)
Optical emission spectroscopy of argon plasma generated by surfatron at frequency 2.45 GHz (2004)
Comparative diagnostics of Ar and He surfatron generated plasma by means of optical emission spectroscopy and probe measurements (2004)
Optical emission spectroscopy and probe measurement in Ar + N2 surfatron discharge (2004)
Spectroscopic and optical study of atmospheric pressure plasma generated by diffuse coplanar barrier discharges (2004)
Fractality of Electrostatic Microdischarges on the Surface of Polymers (2004)
Optical emission spectroscopy of surfatron generated plasma in Ar + O2 and N2 + O2 mixtures (2005)
Optimization of I2 and XeI formation in diffuse coplanar surface discharge sustained in rare gases and I2 mixtures (2005)
Planar UV excilamp excited by a surface barrier discharge (2005)
Plazmová tužka jako perspektivní chirurgický nástroj (2005)
Fractal character of microdischarge phenomena (2005)
Diagnostics of rf unipolar barrier discharge generated by plasma pencil at atmospheric pressure (2005)
Spectral diagnostics of rf plasma discharge generated by plasma pencil at atmospheric pressure (2005)
Longitudinal emission diagnostics of plasma channel in rf barrier torch discharge (2005)
Low-cost Plasma Activation and Chitosan Grafting of Polypropylene and Poly-Lactic-Acid Nonwoven Fabrics (2005)
Diffuse Coplanar Surface Barrier Discharge as a Source of Nonthermal Atmospheric Plasma (2005)
Grafting of Poly-Acrylic-Acid onto Polypropylene Foils Activated by Surface Barrier Discharges in Nitrogen (2005)
Influence of DCSBD on the Adhesion and Chemical Properties of PET Reinforcing Materials, (2005)
On Formation of Very Thin SiO2/a-Si:H/c-Si Structures by Plasma Immersion Ion Implantation and Dielectric Barrier Discharge (2005)
Low-cost High-speed Plasma Activation and Post-plasma Grafting of Polymer Materials (2005)
Surface Modification of Lignocellulosics (2005)
Surface Modification of Polypropylene Non-woven Fabrics by Atmospheric-pressure Plasma Activation Followed by Acrylic Acid Grafting (2005)
Plasma Treatment and Polymerization-Method for Adhesion Strength Improvement of Textile Cord to Rubber (2005)
Electronic Properties of Very Thin Native SiO2/a-Si:H Interfaces and Their Comparison With Those Prepared by Both Dielectric Barrier Discharge Oxidation at Atmospheric Pressure and by Chemical Oxidation (2005)
Low-cost Manufacturing of Battery Separators on the Base of Polypropylene Nonwoven Fabrics (2005)
Dielectric barrier discharge and their application (2005)
Zařízení a způsob povrchové aktivace a následné povrchové úpravy vrstvy celulózových vláken, materiálů na bázi papíru a kartónových *desek (2005)
Spôsob úpravy textilných výstužných materiálov, za účelom zvýšenia adhézie ku gumárenskej zmesi, (2005)
DAS VERFAHREN ZUR ERZEUGUNG EINER PHYSIKALISCH UND CHEMISCH AKTIVEN UMGEBUNG DURCH EINEN PLASMASTRAHL UND PLASMASTRAHL DAZU (2005)
The method of making a physically and chemically active environment by means of a plasma jet and the related plasma jet (2003)
Surfatron Plasma Source of Jet Type - Construction and Diagnostics (2005)
RF plasma pencil - diagnostics of plasma and biomedical application (2006)
RF plasma pencil - charakteristics and application (2006)
High-speed camera study of coplanar barrier discharge in air, nitrogen and argon (2006)
Bio-medical applications and diagnostics of microwave plasma (2006)
Excitation of phosphors by UV XeI excimer radiation (2006)
HF plasma pencil and DC diaphragm discharge in liquids - diagnostics and application (2006)
Diagnostics of rf microdischarge generated at atmospheric pressure (2006)
Plazmová tužka (2006)
Plazmová tužka - univerzální plazmový zdroj pro lokální úpravy (2006)
Plasma pencil - high-universal plasma source for local treatment (2006)
Plazmová tužka - univerzální plazmový zdroj pro lokální úpravy (2006)
Plazmové technologie - moderní metody konzervování-restaurování předmětů kulturního dědictví (2006)
Diagnostics of rf plasma pencil generated at atmospheric pressure (2006)
The influence of dielectric layer on the plasma parameters of atmospheric pressure coplanar discharge (2006)
Improvement of plasma parameters of coplanar barrier discharge using different emitting layers (2006)
High-speed, Low-cost Plasma Activation of Web Materials (2006)
Improvement of plasma parameters of coplanar barrier discharge using different emitting layers (2006)
Application of XeI excimer radiation for excitation of phosphor (2006)
ICCD measurements of the coplanar barrier discharge at atmospheric pressure (2006)
The Influence of Emitting Layer on the Plasma Parameters of Atmospheric-pressure Coplanar Barrier Discharge (2007)
Influence of electrode temperature on plasma parameters of diffuse coplanar surface discharge (2007)
Způsob realizace polyreakcí, plazmo-chemických polyreakcí, jejich modifikace a modifikace makromolekulárních látek plazmovou tryskou s dielektrickou kapilárou obepnutou dutou katodou (2007)
Experimental study of atmospheric pressure plasma jet generated in surface barrier discharge configuration in argon (2007)
Determination of Qw on wooden samples after plasma treatment. (2007)
Generation of XeI UV Excimer Radiation by diffuse coplanar surface discharge (2007)
Diagnostics and comparison of RF and low frequency discharges generated by plasma pencil at atmospheric pressure (2007)
Influence of electrode temperature on plasma parameters of diffuse coplanar surface discharge (2007)
Hydrophylisation of non-woven polypropylene textiles using atmospheric pressure surface barrier discharge (2008)
Plasma Diagnostics of Underwater Electrical Diaphragm Discharge for FabricsTreatment (2008)
The Influence of Electrode Gap Width on Plasma Properties of Diffuse Surface Coplanar Barrier Discharge in Nitrogen (2008)
Space and Time Resolved Optical Emission Spectroscopy of Diffuse Surface Coplanar Barrier Discharge in Nitrogen (2008)
Diagnostics of two configuration of plasma pencil (2008)
Plasma diagnostics of underwater electrical diaphragm discharge for fabrics treatment (2008)
Space and Time Resolved Optical Emission Spectroscopy of Diffuse Surface Coplanar Barrier Discharge in Nitrogen (2008)
Diagnostics of Plasma Pencil by Optical Emission Spectroscopy (2008)
RF discharge at atmospheric pressure - diagnostics and applications (2008)
Sterilization of Escherichia Coli using high frequency atmospheric pressure plasma discharge (2008)
Soustava s ultrahydrofobními vlastnostmi, stavební a přírodní zábavný a/nebo relaxační element (2008)
Lokální modifikace povrchu plazmovou tužkou (2008)
Plazmové systémy pro povrchové úpravy (2008)
Plasma Activation of Wood Surface by Diffuse Coplanar Surface Barrier Discharge (2008)
On the vertical properties of diffuse coplanar surface barrier discharge (2009)
On the plasma properties of diffuse coplanar surface barrier discharge in humid nitrogen and humid air studied by optical emission spectroscopy (2009)
Plasma Treatment of Alumina Surface by DCSBD (2009)
DAS VERFAHREN ZUR ERZEUGUNG EINER PHYSIKALISCH UND CHEMISCH AKTIVEN UMGEBUNG DURCH EINEN PLASMASTRAHL UND PLASMASTRAHL DAZU (2006)
The method of making a physically and chemically active environment by means of a plasma jet and the related plasma jet (2005)
Diagnostics of pulse regime of rf discharge at atmospheric pressure (2009)
ATR-FTIR and TOF LDI MS study of atmospheric pressure plasma activated aluminium surface (2009)
Mass spectrometry of diffuse coplanar surface barrier discharge (2008)
Mass Spectrometry Study of the Coplanar Barrier Discharge Operating in Ambient Air at Atmospheric Pressure (2008)
Surface Modification of Polypropylene in Atmospheric Pressure Diffuse Coplanar Surface Barrier Discharge (2008)
Study of Polypropylene Nonwoven Fabrics Treatment in Underwater Electrical Diaphragm Discharge (2008)
Study of silver coating of polypropylene fabrics using underwater diaphragm discharge (2009)
Silver coating of PP textile by underwater diaphragm discharge (2009)
Underwater diaphragm discharge for PP treatment (2009)
Study of underwater diaphragm discharge method for silver coating of polypropylene textile (2009)
Underwater diaphragm discharge for textile treatment (2009)
Study of underwater diaphragm discharge method for silver coating of propylene fabrics (2009)
Underwater diaphragm discharge for PP treatment (2009)
Remarks on probe measurements on plasma pencil discharge (2009)
APPLICATIONS OF DIELECTRIC BARRIER DISCHARGES FOR INLINE SURFACE TREATMENTS (2009)
Aluminium Surface Activation Using Atmospheric-pressure Plasma (2009)
Underwater Diaphragm Discharge for Textile Treatment (2009)
Technika pro zlepšení plstnících vlastností živočišných vláken využívající plazmovou úpravu (2009)
Diffuse coplanar surface barrier discharge and its applications for in-line processing of low-added-value materials (2009)
Coating of TiO2 nanoparticles on the plasma activated polypropylene fibers (2009)
Plasma Assisted Immobilization of Flame Retardants (2009)
Interaction of Metal Nanopowders with Coated Copper Substrate (2010)
Influence on surface morphology by plasma-surface interaction between Al film and atmospheric pressure DCSBD plasma (2010)
Plasma treatment of silicon surface (2010)
Investigation of silicon surface wettability after plasma treatment (2010)
ATMOSPHERIC PRESSURE DCSBD PLASMA TREATMENT OF AL SURFACE: STUDY OF SURFACE MORPHOLOGY AND CHEMICAL COMPOSITION (2010)
Diagnostics of plasma at atmospheric pressure by optical emission spectroscopy using broadening of lines (2010)
ELECTRON DENSITY OF PLASMA PENCIL DISCHARGE ESTIMATED BY BROADENING OF THE SPECTRAL ATOMIC LINES (2010)
Gas plasmas and plasma modified materials in medicine (2010)
Comparative study on hydrogenated and deuterated amorphous carbon films deposited by RF PECVD (2010)
Study on the properties of modified amorphous carbon thin films deposited by PECVD. (2010)
AGING BEHAVIOR OF ALUMINIUM TREATED BY ATMOSPHERIC PRESSURE PLASMAS (2011)
Method and apparatus for treatment of textile materials (2002)
Effect of terpene admixture on negative corona current pulses in air (2009)
Immobilisation of iron oxide nanoparticles onto the plasma-activated polymer surfaces (2009)
Cleaning of aluminium surface using diffuse coplanar surface barrier discharge (2008)
Barrier properties of polypropylene nonwoven with TiO2 coating (2008)
Air plasma treatment of copper sheets (2011)
Air plasma treatment of aluminium, steel and chromium surfaces (2011)
Diffuse Coplanar Surface Barrier Discharge: Pattern Behaviour Under Different Conditions (2011)
Improvement of surface properties of reinforcing polypropylene fibres by atmospheric pressure plasma treatment (2011)
Plasma treatment of silicon surface by DCSBD (2011)
Povrchová plazmová úprava krystalických křemíkových desek určených pro výrobu solárních článků (2010)
Diagnostics of plasma at atmospheric pressure by optical emission spectroscopy using broadening of lines (2011)
Effect of plasma treatment on the surface morphology and wettability of (111) and (100) silicon wafers (2011)
Improvement of wetting properties of polypropylene fibres by atmospheric pressure plasma treatment (2011)
Positive Streamer Formation in Cathode Region of Pulsed High-Pressure Discharges for Transversely Excited Atmosphere Laser Application (2011)
REINFORCING POLYPROPYLENE FIBRES MODIFIED BY ATMOSPHERIC PRESSURE PLASMA (2011)
DIAGNOSTICS OF DCSBD DISCHARGE AT ATMOSPHERIC PRESSURE (2011)
PROBE MEASUREMENTS AT ATMOSPHERIC PRESSURE (2011)
Plasma pencil as an excitation source for atomic emission spectrometry (2012)
Formation of aluminium, aluminium nitride and nitrogen clusters via laser ablation of nano aluminium nitride. Laser desorption ionisation and matrixassisted laser desorption ionisation timeofflight mass spectrometry (2011)
Diagnostics of Planar XeI UV Exciplex Lamp Excited by Coplanar Surface Barrier Discharge (2011)
Využití difúzního koplanárního povrchového bariérového výboje pro fixaci hydrofilní aviváže na povrchu polypropylenové netkané textilie (2012)
Zařízení pro zlepšení plstnících vlastností živočišných vláken v dielektrickém koplanárním povrchovém bariérovém výboji v in-line režimu. (2012)
Laboratorní zařízení pro in-line plazmovou úpravu polypropylenových vláken přidávaných do betonu (2012)
Generation of a high-density highly non-equilibrium air plasma for high-speed large-area flat surface processing (2011)
Plasma pencil as an alternative excitation source for atomic emission spectrometry (2011)
Air DCSBD plasma treatment of Al surface at atmospheric pressure (2012)
High-speed Ambient Air Plasma Cleaning of Flat Glass Surfaces (2011)
Influence of humidity on atmospheric pressure air plasma treatment of aluminium surfaces (2012)
Influence of Water Vapor Admixture in Carrier Gas on PP Nonwoven Fabrics Hydrophilicity in Process of Plasma Surface Treatment (2011)
Determination of Power Losses in Dielectric of Surface and Coplanar DBD (2011)
Cold Atmospheric Pressure Plasma for Plant Seeds Treatment (2011)
Deposition of Polymer Films on Aluminium Surface Using Atmospheric-pressure Plasma (2011)
Plasma treatment of animal fibres using dielectric barrier discharge at atmospheric pressure (2012)
Probe measurements on H2-O2 flame (2012)
Modification of the properties of animal fibers using dielectric barrier discharge at atmospheric pressure (2012)
USING DIFFUSE COPLANAR SURFACE BARRIER DISCHARGE FOR IMPROVEMENT OF FELTING PROPERTIES OF ANIMAL FIBRES (2012)
Air plasma treatment of copper sheets using Diffuse Coplanar Surface Barrier Discharge (2012)
Deposition of poly(acrilic acid) on the polypropylene fibers using a pulsed underwater plasma discharge (2012)
Characterization of plasma pencil pulsed discharge (2012)
Activation of poly(methyl methacrylate) surfaces by atmospheric pressure plasma (2012)
Atmospheric pressure diffuse plasma in ambient air for ITO surface cleaning (2012)
Diffuse coplanar surface barrier discharge for treatments of surfaces (2012)
Diagnostics of DCSBD discharge for industrial applications (2012)
Activation of poly(ethylene terephthalate) surfaces by atmospheric pressure plasma (2012)
Laser ablation synthesis of new gold tellurides and adsorption on plasma treated glass or silica surfaces. Laser desorption ionisation time-of-flight mass spectrometry (2012)
DCSBD discharge for plasma treatment of rabbit fibres at athmospheric pressure (2012)
Surface Nanotreatment of Silicon and Polyamide by Means of Atmospheric Microwave Plasma Jet (2012)
Plasma Surface Modification of Biocompatible Polymers Using Atmospheric Pressure Dielectric Barrier Discharge (2012)
Zařízení pro úpravu netkané textilie (2012)
Steel Surface Treatment and Following Aging Effect after Coplanar Barrier Discharge Plasma in Air, Nitrogen and Oxygen (2012)
Diffuse coplanar surface barrier discharge for cleaning and activation of glass substrate (2012)
Zařízení pro plazmové opracování semen založené na dielektrickém koplanárním povrchovém bariérovém výboji, který pracuje za atmosférického tlaku (2012)
Zařízení pro plazmové opracování semen založené na diafragmovém výboji v kapalině (2012)
Influence of analyzed solutions on the plasma pencil discharge (2012)
Behaviour of analytical spectral lines emitted by plasma pencil operated in a continuous and in a pulsed mode (2012)
IMPROVEMENT OF SURFACE PROPERTIES OF REINFORCING POLYPROPYLENE FIBRES BY ATMOSPHERIC PRESSURE PLASMA TREATMENT (2012)
IMPORTANCE OF POLYPROPYLENE FIBERS AS A REINFORCEMENT IN CONCRETE (2012)
Method of realisation of polyreactions, plasma-chemical polyreactions, their modification and modification of macromolecular substances by the plasma jet with a dielectric capillary enlaced by a hollow cathode (2012)
Activation of silicon surface in atmospheric oxygen plasma (2012)
POLYPROPYLENE FIBERS MODIFIED BY ATMOSPHERIC PRESSURE PLASMA AS REINFORCEMENT FOR CONCRETE (2012)
SYNTHESIS OF SIO2 NANOFIBRES BY UTILIZATION OF DCSBD ATMOSPHERIC PRESSURE PLASMA (2012)
Oxidation of Silicon Surface by DCSBD (2012)
DEPOSITION OF POLYMER FILMS ON ALUMINIUM SURFACE USING ATMOSPHERIC-PRESSURE PLASMA (2012)
CHEMICAL ASPECTS OF STREAMER MECHANISM FOR NEGATIVE CORONA DISCHARGES (2012)
CHEMICAL AND PHYSICAL EVALUATION OF HYDROPHOBIC pp-HMDSO LAYERS DEPOSITED BY PLASMA POLYMERIZATION AT ATMOSPHERIC PRESSURE (2012)
THE EFFECT OF SURFACE CLEANING AND REMOVING OF ORGANIC CONTAMINANTS FROM SILICON SUBSTRATES AND ITO GLASS BY ATMOSPHERIC PRESSURE NON-THERMAL PLASMA (2012)
Zařízení pro zapálení a udržení hoření nízkoteplotního dielektricky izolovaného vyfukovaného plazmatu (2013)
Room temperature plasma oxidation in DCSBD: A new method for preparation of silicon dioxide films at atmospheric pressure (2013)
DIFFUSE COPLANAR SURFACE BARRIER DISCHARGE IN NITROGEN: MICRODISCHARGES STATISTICAL BEHAVIOR (2013)
High-resolution measurements of the electric field at the streamer arrival to the cathode: A unification of the streamer-initiated gas-breakdown mechanism (2012)
Laser ablation synthesis of new gold tellurides using tellurium and nanogold as precursors. Laser desorption ionisation time-of-flight mass spectrometry (2013)
Study of properties of DCSBD plasma treated rabbit fibres (2013)
Diagnostics of planar discharge - DCSBD (2013)
Diffuse Coplanar Surface Barrier Discharge in Artificial Air : Statistical Behavior of Microdischarges (2013)
Treatment of polypropylene fibers by HV pulse underwater discharge generated in acrylic acid solution at atmospheric pressure (2012)
Diagnostics of planar discharge for industrial applications (2013)
Temperature measurements using OH radical spectra (2013)
Polycaprolactone nanofibers treated in atmospheric plasma source for biomedical applications (2013)
Plasma Treatment of Glass Surfaces Using Diffuse Coplanar Surface Barrier Discharge in Ambient Air (2013)
Cleaning of glass surfaces using diffuse coplanar surface barrier discharge in ambient air (2013)
Plasma cleaning and activation of silicon surface in Dielectric Coplanar Surface Barrier Discharge (2013)
Nano-modification of surfaces using low-cost ambient air diffuse plasma (2013)
Atmospheric Pressure Plasma Treatment of Polyamide-6 Foils (2013)
Low-cost high-quality plasma cleaning and activation of large size flat surfaces (2013)
Industrial ambient air plasma sources for in-line large area surface treatments (2013)
Investigation of the plasma effects on wood after activation by diffuse coplanar surface barrier discharge (2013)
Surface analysis of poly(ethylene naphthalate) (PEN) films treated at atmospheric pressure using diffuse coplanar surface barrier discharge in air and in nitrogen (2012)
Diffuse Coplanar Surface Barrier Discharge in Artificial Air: Statistical Behavior of Microdischarges (2013)
ON THE PLASMA PROPERTIES OF DIFFUSE COPLANAR SURFACE BARRIER DISCHARGE IN HUMID NITROGEN AND HUMID AIR STUDIED BY OPTICAL EMISSION SPECTROSCOPY (2009)
Atmospheric Plasma Surface Activation of Poly(Ethylene Terephthalate) Film for Roll-To-Roll Application of Transparent Conductive Coating (2014)
Zařízení pro plazmové opracování semen v kapalině (2013)
Zařízení pro plazmové opracování semen za atmosférického tlaku (2013)
Aging of plasma-activated copper and gold surfaces and its hydrophilic recovery after water immersion (2014)
Plasma discharge and time-dependence of its effect to bacteria (2014)
Flat glass surface cleaning and activation using ambient air plasma (2013)
Plasma Activation of Polymers by Diffuse Coplanar Surface Barrier Discharge and Low Pressure Ion Bombardment (2013)
Treatment of PP textiles in acrylic acid underwater discharge (2013)
Study of the layer deposited on the DCSBD plasma source surface during plasma polymerization process (2013)
Study of aluminium surface treatment using atmospheric-pressure and low-pressure plasma (2013)
Generation of Large-Area Highly-Nonequlibrium Plasma in Pure Hydrogen at Atmospheric Pressure (2014)
Využití difúzního koplanárního povrchového bariérového výboje pro zvýšení plstivosti živočišných vláken v provozu Tonak a.s. (2013)
Zařízení pro úpravu rostlinných semen nízkoteplotním plazmatem za atmosférického tlaku (2013)
Laser ablation synthesis of new arsenic tellurides. LDI Time Of Flight Mass Spectrometry (2014)
Zařízení pro stanovení plstících vlastností upravené králičí a zaječí srsti (2014)
Kompozice pro přípravu modifikovaných želatinových nanovláken a nanovlákna (2014)
Functionalisation and pore size control of electrospun PA6 nanofibres using a microwave jet plasma (2014)
Plazmový generátor DCSBD s integrovaným vysokonapěťovým transformátorem (2014)
Nanocapsules attachment to non-woven fabrics using inkjet printing (2014)
Zařízení pro zlepšení plstivosti živočišných vláken pomocí plazmové úpravy (2014)
Surface dielectric barrier discharge (SDBD) between two liquid electrodes (2014)
Surface dielectric barier discharge generated by the liquid electrodes for material treatment (2014)
Cleaning of glass surfaces using diffuse coplanar surface barrier discharge in ambient atmosphere (2014)
Optical emission spectroscopy of DCSBD plasma (2014)
Permanent hydrophilization of outer and inner surfaces of polytetrafluoroethylene tubes using ambient air plasma generated by surface dielectric barrier discharges (2014)
DIFFUSE COPLANAR SURFACE BARRIER DISCHARGE IN HYDROGEN CONTAINING ATMOSPHERE (2014)
PLASMA-SURFACE INTERACTION EFFECTS DURING ATMOSPHERIC PRESSURE PLASMA MODIFICATION OF SILICON (2014)
PLASMA-SURFACE INTERACTION EFFECTS DURING ATMOSPHERIC PRESSURE PLASMA MODIFICATION OF SILICON (2014)
DIFFUSE COPLANAR SURFACE BARRIER DISCHARGE IN HYDROGEN CONTAINING ATMOSPHERE (2014)
Nonthermal plasma modification of polypropylene fibres for cementitious composites (2015)
SURFACE DIELECTRIC BARIER DISCHARGE GENERATED WITH THE HELP OF LIQUID ELECTRODES (2014)
DIFFUSE COPLANAR SURFACE BARRIER DISCHARGE PRE-TREATMENT FOR IMPROVING COATING PROPERTIES (2015)
A comparison of chemical and atmospheric plasma assisted copper plating on carbon fiber reinforced epoxy polymer surfaces (2014)
Plasma-chemical modifications of cellulose for biomedical applications (2014)
Easily ionizable elements in analytical plasma pencil spectroscopy (2014)
Diffuse Coplanar Surface Barrier Discharge in Artificial Air: Statistical Behaviour of Microdischarges (2015)
INFLUENCE OF SUBSTRATE THICKNESS ON DIFFUSE COPLANAR SURFACE BARRIER DISCHARGE PROPERTIES (2014)
Adsorption of cisplatin on plasma trated sufaces: a mass spectrometric study (2012)
Modification of (111) and (100) silicon in atmospheric pressure plasma (2014)
High-speed Low-cost Surface Treatments using a Novel Atmospheric-pressure Plasma Source (2015)
PLASMA TREATMENT OF HOLLOW OBJECTS USING SURFACE DBD WITH LIQUID ELECTRODES (2015)
Způsob stanovení plstících vlastností upravené králičí a zaječí srsti a zařízení k jeho provádění (2014)
Properties of atmospheric pressure plasma oxidized layers on silicon wafers (2015)
Adhesive properties of polyamide-12 foil treated by atmospheric pressure plasma (2014)
Atmospheric pressure plasma treatment of polyamide-12 foils (2015)
Deposition of Zn-containing films using atmospheric pressure plasma jet (2014)
Underwater discharge plasma-induced coating of poly(acrylic acid) on polypropylene fiber (2015)
Poloprovozní zařízení na plazmovou povrchovou úpravu semen (2014)
Ionization and excitation effects in plasma pencil spectroscopy (2015)
Possibilities and analytical properties of the radiofrequency plasma pencil operating in the continuous and in the pulsed mode (2015)
RADIOFREQUENCY PLASMA PENCIL OPERATED IN A CONTINUOUS AND IN A PULSED REGIME: A COMPARISON OF THE PROPERTIES (2014)
Zařízení pro zlepšení adheze polypropylenových vláken pomocí plazmové úpravy (2014)
Zařízení ke snížení nebo odstranění organické a anorganické kontaminace vakuového systému zobrazovacích a analytických zařízení (2014)
Laser ablation generation of clusters from As-Te mixtures, As-Te glass nano-layers and from Au-As-Te nano-composites. Quadrupole ion trap time-of- flight mass spectrometry (2015)
Method for improving felting properties of animal fibers by plasma treatment (2014)
THE SURFACE DIELECTRIC BARRIER DISCHARGE GENERATED BY THE LIQUID ELECTRODES FOR MATERIAL TREATMENT (2014)
Surface dielectric barrier discharge generated by the liquid electrodes for material treatment (2015)
Low temperature hydrogenation of diamond nanoparticles using diffuse coplanar surface barrier discharge at atmospheric pressure (2015)
LDI TOFMS for structure elucidation of chalcogenides (2015)
Způsob plazmové úpravy vnitřního a/nebo vnějšího povrchu dutého elektricky nevodivého tělesa a zařízení pro provádění tohoto způsobu (2015)
Treatment of flexible surfaces using diffuse coplanar surface barrier discharge (2015)
Sterilization of Escherichia Coli using high frequency atmospheric pressure plasma discharge. (2008)
Energy efficiency of planar discharge for industrial applications (2015)
Low-Temperature hydrogenation of diamond nanoparticles using diffuse coplanar surface barrier discharge at atmospheric pressure (2015)
Nucleation and initial growth of atomic layer deposited titanium oxide determined by spectroscopic ellipsometry and the effect of pretreatment by surface barrier discharge (2015)
Low temperature temporal and spatial atomic layer deposition of TiO2 films (2015)
Physical Vapour Deposition of As-Te glass layers and Mass Spectrometry analysis (2015)
Surface chemical changes of atmospheric pressure plasma treated rabbit fibres important for felting process (2015)
Atmospheric pressure plasma source for high-speed low-cost surface treatments (2014)
Surface dielectric barrier discharges initiated using liquid electrodes (2015)
Attachment of Poly(l-lactide) Nanoparticles to Plasma-Treated Non-Woven Polymer Fabrics Using Inkjet Printing (2015)
Plasma treatment of glass using dielectric barrier discharge and gliding arc (2015)
Time-resolved OES of dielectric barrier discharge (2015)
Ravi Mawale, Mayuri Vilas Ausekar, David Pavliňák, Oleksandr Galmiz, Pavel Kubáček, Josef Havel (2015)
Mechanical properties of atomic layer deposited Al2O3/ZnO nanolaminates (2015)
Improvement of glass wettability using Diffuse Coplanar Surface Barrier Discharge and gliding arc considering aging effect (2015)
Diagnostics of surface dielectric barrier discharges generated above solid or liquid surfaces (2014)
Diffuse Coplanar Surface Barrier Discharge: Influence of Gas Humidity on Plasma Parameters (2015)
Application Important Characteristics of Diffuse Coplanar Surface Barrier Discharge - Plasma Layer Thickness and Humidity Influence (2015)
Enhancement of carbon-steel blend adhesion to rubber using atmospheric pressure plasma (2015)
Zařízení pro povrchovou plazmovou úpravu materiálu ze skupiny fólie, papír, textilie, netkaná textilie (2015)
Study of surface dielectric barrier discharge generated using liquid electrodes in different gases (2016)
Treatment of glass with different plasma discharges at atmospheric pressure (2014)
Příprava biopolymerních nanovláken vhodných pro medicínské aplikace (2015)
Významné baktericidní účinky želatinových nanovláken modifikovaných oxidovanou celulózou (2014)
Gelatin Nanofibers Modified with Oxidized Cellulose with Significant Bactericidal Effects (2014)
Combined Matrix Effects in Plasma Pencil Spectroscopy (2016)
Stable Gelatin Nanofibers Modified with Oxidized Cellulose for Soft Tissue Engineering (2015)
Electrospinning of Biopolymers Suitable for Medical Applications (2015)
Novel Oxycellulose/Gelatin Nanofibers for Medical Applications (2015)
Gelatin Nanofibers Modified with Oxidized Cellulose with Significant Bactericidal Effects (2014)
Gelatin Nanofibers with Significant Bactericide Effeciency (2013)
Functionalisation and pore size control of electrospun PA6 nanofibres using a microwave jet plasma (2015)
Surface dielectric barrier discharge generated using liquid electrodes and it application for surface treatment of polymer tubes (2015)
Nano-modification of Si-wafer surfaces using low-cost ambient air diffuse plasma (2015)
Photoelectrocatalytic activity of ZnO coated nano-porous silicon by atomic layer deposition (2016)
Influence of Chemical Precleaning on the Plasma Treatment Eficiency of Aluminum by RF Plasma Pencil (2016)
Atomic layer deposition of cerium oxide for potential use in diesel soot combustion (2016)
Deposition of stable amine coating onto polycaprolactone nanofibers by low pressure cyclopropylamine plasma polymerization (2015)
Mass Spectrometry of Diffuse Coplanar Surface Barrier Discharge: Influence of Discharge Frequency and Oxygen Content in N2/O2 Mixture (2015)
SiO2/Si etching in atmospheric pressure hydrogen DBD plasma (2015)
Zařízení pro plazmovou úpravu substrátů v povrchovém bariérovém výboji (2015)
Způsob snížení nebo odstranění organické a anorganické kontaminace vakuového systému zobrazovacích a analytických zařízení a zařízení k jeho provádění (2015)
Evaluation of plasma as a pretreatment tool in industry (2015)
Zařízení pro úpravu netkané textilie (2012)
Einrichtung zur Behandlung eines Vliesstoffs (2013)
Novel electrospun gelatin/oxycellulose nanofibers as a suitable platform for lung disease modeling (2016)
Wound Dressing based on Chitosan/hyaluronan/Nonwoven Fabrics: Preparation, Characterization and Medical Applications (2016)
Biodegradable poly (e-caprolactone)/gelatin nanofibers: Effect of tubular halloysite on structure and properties (2016)
Novel non-toxic bactericidal electrospun gelatin/oxycellulose nanofibers for medical applications (2015)
Application of surface dielectric barrier discharge for treatment of hollow objects (2016)
Efficient solar photocatalytic activity of TiO2 coated nano-porous silicon by atomic layer deposition (2016)
Plasma treatment of detonation and HPHT nanodiamonds in diffuse coplanar surface barrier discharge in H2/N2 flow (2016)
Atomic layer deposition on plasma pre-treated flexible polymer surfaces (2016)
Enhancement of carbon-steel peel adhesion to rubber blend using atmospheric pressure plasma (2016)
Surface Modification of Paper and Paperboards Using Atmospheric Pressure Plasma (2016)
Effects of corona space charge polarity and liquid phase ion mobility on the shape and velocities of water jets in the spindle jet and precession modes of water electro-spray (2016)
Structural and morphological characterization of Al2O3 coated macro-porous silicon by atomic layer deposition (2016)
PLASMA TREATMENT OF NATURAL LEATHER WITH DIFFUSE COPLANAR SURFACE BARRIER DISCHARGE IN AMBIENT AIR (2016)
Plasma modification of polycarbonate surface by athmospheric pressure plasma sources (2016)
Application of Plasma Treatment in the Nanofibers Processing (2016)
APPLICATION OF SURFACE DIELECTRIC BARRIER DISCHARGE GENERATED FROM LIQUID ELECTRODE FOR SURFACE TREATMENT OF TUBES (2016)
PLASMA SURFACE ACTIVATION OF HIGH DENSITY POLYETHYLENE AT ATMOSPHERIC PRESSURE (2015)
WIDE-PRESSURE-RANGE COPLANAR BARRIER DISCHARGE (2016)
Application of imaging spectroscopic reflectometry forcharacterization of gold reduction from organometallic compound bymeans of plasma jet technology (2017)
Kompozice pro přípravu modifikovaných želatinových nanovláken, nanovlákna a způsob jejich přípravy (2016)
Development of Al2O3 electrospun fibers prepared by conventional sintering method or plasma assisted surface calcination (2017)
Laser Desorption Ionization Quadrupole Ion Trap Time-of-Flight Mass Spectrometry of AumFen+/– Clusters Generated from Gold-Iron Nanoparticles and their Giant Nanoflowers. Electrochemical and/or Plasma Assisted Synthesis (2017)
Atmospheric pressure plasma etching of silicon dioxide using diffuse coplanar surface barrier discharge generated in pure hydrogen (2017)
Surface chemistry and initial growth of Al2O3 on plasma modified PTFE studied by ALD (2017)
Fast and Low-Temperature (70 °C) Mineralization of Inkjet Printed Mesoporous TiO2 Photoanodes Using Ambient Air Plasma (2016)
Study of effects and conditions on the solubility of natural polysaccharide gum karaya (2017)
Wide-pressure-range coplanar dielectric barrier discharge: Operational characterisation of a versatile plasma source (2017)
The Effect of Halloysite on Structure and Properties of Polycaprolactone/Gelatin Nanofibers (2017)
Acrylic Acid Plasma Treatment of Polypropylene Nonwoven Fabric (2016)
Vakuová fyzika 1 (2016)
Mass spectrometry of diffuse coplanar surface barrier discharge: influence of discharge frequency and oxygen content in N2/O2 mixture (2017)
ATMOSPHERIC PRESSURE PLASMA CO-POLYMERIZATION OF MALEIC ANHYDRIDE AND ACETYLENE ONTO POLYCAPROLACTONE FIBERS (2015)
DIELECTRIC BARRIER DISCHARGE GENERATED FROM THE LIQUID ELECTROLYTE (2015)
Effects of easily ionisable elements on copper and zinc lines excited in a plasma pencil (2016)
An Array of Micro-hollow Surface Dielectric Barrier Discharges for Large-Area Atmospheric-Pressure Surface Treatments (2017)
Analytical and technical aspects of free discharge end of plasma pencil (2016)
Způsob generování nízkoteplotního plazmatu, způsob plazmové úpravy tekutin, práškových materiálů i pevných látek tímto nízkoteplotním plazmatem a zařízení k provádění těchto způsobů (2016)
Způsob eliminace změn hmotnosti závaží vyvolaných znečištěním povrchu závaží, zařízení k provádění tohoto způsobu a závaží s povrchovou úpravou pro eliminaci změn hmotnosti (2016)
Low-temperature reduction of Graphene Oxide by atmospheric pressure hydrogen plasma (2016)
Low-cost, high-speed hydrophilic finishing of lightweight polypropylene nonwovens by ambient air plasma (2017)
Atmospheric pressure plasma assisted calcination of composite submicron fibers (2016)
Atmospheric pressure plasma assisted calcination of organometallic fibers (2016)
Plasma assisted calcinations of polymer/precursor fibers (2016)
The parameters of diffuse coplanar surface barrier discharge generated in pure water vapour at atmospheric pressure (2016)
Modification of polymer surfaces by atmospheric pressure plasmas (2016)
Plasma assisted preparation of metal oxide nanofibers (2016)
Field enhancement in triple point of Diffuse Coplanar Surface Barrier Discharge electrode system (2016)
Monitoring of low temperature plasma effect in combination with hypericin on human lymphocytes (2016)
Low-cost and in-line plasma treatment of BOPP films (2016)
Zařízení a způsob pro povrchovou aktivaci vrstev celulózových vláken, materiálů na bázi papíru a kartónových desek (2016)
Hafnium oxide thin films as a barrier against copper diffusion in solar absorbers (2017)
Cathode voltage and discharge current oscillations in HiPIMS (2017)
Nanovlákenné buněčné nosiče z poly-ε-kaprolaktonu modifikovaného sericinem (2017)
Fluorescence measurement of hydroxyl radicals in a coplanar dielectric barrier discharge ignited in water vapour (2017)
MEASUREMENT OF OH RADICALS GENERATED IN DIFFUSE COPLANAR SURFACE BARRIER DISCHARGE (2017)
Atmospheric pressure plasma treatment of flat aluminum surface (2015)
Areal homogeneity verification of plasma generated by diffuse coplanar surface barrier discharge in ambient air at atmospheric pressure (2017)
Složení a morfologie stříbrných mincí v kontextu jejich čištění (2016)
Glass bond adhesive strength improvement by DCSBD atmospheric-pressure plasma treatment (2017)
Two steps roll-to-roll plasma processing to optimize inkjet printed TiO2 photoanode for flexible electronics (2017)
Surface modification of natural leather using diffuse ambient air plasma (2017)
Complex interaction of subsequent surface streamers via deposited charge: a high- resolution experimental study (2017)
Atmospheric pressure plasma treatment of agricultural seeds with effect on wettability and surface chemical changes (2017)
Hydrophilization of outer and inner surfaces of Poly(vinylchloride) tubes using surface dielectric barrier dischargesgenerated in ambient air plasma (2017)
Low-temperature (70 °C) Processing of Inkjet Printed TiO2 Photoanodes Using Ambient Air Plasma (2017)
Ambient air plasma pre-treatment of non-woven fabrics for deposition of antibacterial poly (l-lactide) nanoparticles (2017)
Low-Temperature (70° C) Ambient Air Plasma-Fabrication of Inkjet-Printed Mesoporous TiO2 Flexible Photoanodes (2017)
Hydrophilization of outer and inner surfaces of PVC tubes using surface dielectric barrier discharges generated above the liquid electrode (2017)
Modification of paper surface properties by corona as pretreatment before coating (2017)
Effect of plasma pre-treatment and post-treatment on the adhesive properties of silicone coated release liner paper (2017)
Effect of atmospheric pressure plasma on surface modification of paper (2017)
Aparatura pro povrchové opracování dutých těles pomocí plazmatu (2017)
CHANGING THE SURFACE PROPERTIES OF ABS PLASTIC BY PLASMA (2017)
Optical characterization of hafnia films deposited by ALD on copper cold-rolled sheets by difference ellipsometry (2017)
A Multihollow microplasma discharge for remote plasma atmospheric pressure surface treatments (2017)
Low-temperature plasma processing of inkjet printed TiO2 photoanodes (2017)
Plasma assisted calcination of AL2(NO3)3/PAN submicron fibers at atmospheric pressure (2017)
Surface modification of PP nonwovens by plasma generated in water and acrylic acid water solution (2017)
Industrial Corona Pre- and Post-treatment for Enhanced Silicone Coating of Paper used as Release Liner (2018)
Plasma induced removal of base polymer matrix by preparation of inorganic submicron fibers (2018)
Roll-to-roll surface etching of polymers using hydrogen plasma at atmospheric pressure (2017)
Powder transport using sequentially pulsed coplanar barrier discharge (2017)
Atmospheric pressure plasma treatment of agricultural seeds of cucumber (Cucumis sativus L.) and pepper (Capsicum annuum L.) with effect on reduction of diseases and germination improvement (2018)
Enhancement of electrical properties of flexible ITO/PET by atmospheric pressure roll-to-roll plasma (2018)
Coplanar surface barrier discharge ignited in water vapor - a selective source of OH radicals proved by (TA)LIF measurement (2018)
The Influence of Curing Methods on the Physico-chemical Properties of Printed Mesoporous Titania Patterns Reinforced By Methylsilica Binder (2018)
Effect of Cold Atmospheric Pressure Plasma on the Wheat Seedlings Vigor and on the Inactivation of Microorganisms on the Seeds Surface (2016)
Atmospheric pressure plasma assisted calcination by the preparation of TiO2 fibers in submicron scale (2018)
INTERACTION OF LOW-TEMPERATURE PLASMA WITH GRAINS OF MAIZE (ZEA MAYS L.) (2016)
Magnetic Nanoparticles: From Design and Synthesis to Real World Applications (2017)
Atmospheric dry hydrogen plasma reduction of inkjet-printed flexible graphene oxide electrodes (2018)
Reinigen, Funktionalisieren und Beschichten - Mit Atmosphärendruckplasmen Produkte optimieren (2016)
Inactivation of Escherichia coli on PTFE surfaces by diffuse coplanar surface barrier discharge (2016)
Atmospheric pressure dielectric barrier discharges for a large variety of surface processes (2017)
Unified model of the streamer initiated gas breakdown (2017)
Atmospheric pressure plasma assisted preparation of ceramic submicron fibers (2017)
Plasma treatment of seeds by Diffuse Coplanar Surface Barrier Discharge (2017)
Zařízení pro plazmovou povrchovou úpravu vnitřních povrchů dutých těles (2017)
Electron density in surface barrier discharge emerging at argon/water interface: quantification for streamers and leaders (2018)
METHOD OF PLASMA TREATMENT OF AN INTERNAL AND/OR EXTERNAL SURFACE OF A HOLLOW ELECTRICALLY NON-CONDUCTIVE BODY AND A DEVICE FOR CARRYING OUT THIS METHOD (2017)
Method for reducing or removing organic and inorganic contamination from a vacuum system of imaging and analytical devices and device for carrying it out (2017)
Unique atmospheric-pressure plasma technology for low-cost industrial surface treatments of materials (2018)
Atmospheric-Pressure Plasma Treatment of Fibrous Materials: Low- Cost, High-Speed Finishing of Nonwoven Fabrics and Low- Temperature Calcination of Inorganic Submicron Fibers (2018)
Large area roll-to-roll processing of flexible substrates by atmospheric pressure reduction plasma (2018)
The 15th International Symposium on High Pressure Low Temperature Plasma Chemistry (HAKONE XV) (2017)
Activation of polycarbonate (PC) surfaces by atmospheric pressure plasma in ambient air (2018)
Design and evaluation of plasma polymer deposition on hollow objects by electrical plasma generated from the liquid surface (2018)
Plasma treatment of polyethylene tubes in continuous regime using surface dielectric barrier discharge with water electrodes (2018)
Effect of halloysite nanotube structure on physical, chemical, structural and biological properties of elastic polycaprolactone/gelatin nanofibers for wound healing applications (2018)
Advanced electrical current measurements of microdischarges: evidence of sub-critical pulses and ion currents in barrier discharge in air (2018)
NANOSTRACTURING OF POLYMETHYL METHACRYLATE SURFACE WITH USE OF HIGLY ETCHING PLASMA (2018)
Multi-electrode sequentially pulsed coplanar barrier discharge for the transport of bulk materials (2018)
Mineralization of flexible mesoporous TiO2 photoanodes using two low temperature dielectric barrier discharges in ambient air (2019)
Magnetic Halloysite Reinforced Biodegradable Nanofibres: New Challenge for Medical Applications (2018)
Catalytic Performance of Ag2O and Ag Doped CeO2 Prepared by Atomic Layer Deposition for Diesel Soot Oxidation (2018)
Application of dielectric barrier plasma treatment in the nanofiber processing (2018)
Plasma polymer deposition on hollow objects by electrical plasma generated from liquid electrode (2018)
Plasma treatment of polyethylene tubes in continuous regime using surface dielectric barrier discharge with water electrodes (2018)
Atmospheric-pressure plasma technology for surface treatment of materials (2018)
Plasma treatment of vegetable seeds with surface dielectric barrier discharge in ambient air at atmospheric pressure (2018)
Effect of plasma treatment of polymeric tape carriers on wetting behaviour of aqueous ceramic tape casting slurry (2019)
A Comparison of the Effects of Ambient Air Plasma Generated by Volume and by Coplanar DBDs on the Surfaces of PP/Al/PET Laminated Foil (2018)
Plasma Processing of Surfaces and Nanostructured Coatings for Flexible and Printed Electronics (2018)
Využití metody Start of Growth Time (SGT) pro high throughput kvantifikaci biofilmu (2018)
METHOD OF PLASMA TREATMENT OF AN INTERNAL AND/OR EXTERNAL SURFACE OF A HOLLOW ELECTRICALLY NON-CONDUCTIVE BODY AND A DEVICE FOR CARRYING OUT THIS METHOD (2018)
Atmospheric-pressure plasma treatment of float glass as surface cleaning and activation procedure prior to coating (2018)
Plasma treatment of polyethylene tubes in continuous regime using surface dielectric barrier discharge with water electrodes (2018)
Zařízení pro plazmovou úpravu povrchů substrátů (2018)
Preparation of electrospun alumina nanofibres (2018)
Moderní analytické techniky v restaurování materiálů (2018)
Modification of Various Polymer Surfaces Using Reduction Plasma at Atmospheric Pressure (2018)
STUDY OF THE ELECTRICAL BEHAVIOR OF THE SPECIAL CERAMIC BARRIER LAYER FOR DIELECTRIC BARRIER DISCHARGE (2018)
Effect Of Cold Atmospheric Pressure Plasma Generated By Diffuse Coplanar Surface Barrier Discharge On Poly(2-Oxazoline) Thin Films (2018)
Structural and Optical Properties of Luminescent Copper (I) Chloride Thin Films Deposited by Sequentially Pulsed Chemical Vapour Deposition (2018)
Preparation of Nanofibers by electrospinning process and the treatment by electrical plasma discharges (2018)
Improved microstructure of alumina ceramics prepared from DBD plasma activated powders (2019)
The role of physisorbed species on electrophoretic deposition of Al2O3 and YSZ powders (2018)
The 3D imaging of mesenchymal stem cells on porous scaffolds using high-contrasted x-ray computed nanotomography (2019)
Zařízení na měření prašnosti mořeného osiva (2018)
METHOD OF PLASMA TREATMENT OF AN INTERNAL AND/OR EXTERNAL SURFACE OF A HOLLOW ELECTRICALLY NON-CONDUCTIVE BODY AND A DEVICE FOR CARRYING OUT THIS METHOD (2018)
Zařízení pro aktivaci vodní páry plazmatem využitím multidutinového bariérového výboje (2018)
Zařízení pro testování mechanické stability vrstev (2018)
Funkční vzorek velkoplošní flexibilní fotoanody vyrobenou metodou roll-to-roll (2018)
Optimalizace plazmatické roll-to-roll linky (2018)
Výroba flexibilních fotoanod s ověřenými vlastnosti (2018)
Zařízení pro vytvoření dielektrického bariérového výboje (2018)
Manipulation of powdery materials by a sequentially pulsed coplanar barrier discharge (2019)
Technická dokumentace řešení reaktoru pro redukční plazmovou úpravu materiálů (2018)
ROLL-TO-ROLL ATMOSPHERIC PRESSURE PLASMA TREATMENT OF POLYAMIDE FOILS (2019)
Souhrnná výzkumná zpráva popisující měření prašnosti osiva ošetřovaného plazmatem (2018)
The statistics of spoke configurations in HiPIMS discharges (2019)
The future for plasma science and technology (2019)
White paper on the future of plasma science and technology in plastics and textiles (2019)
White paper on the future of plasma science for optics and glass (2019)
MICRO-HOLLOW SURFACE DISCHARGE FOR BACTERIAL DECONTAMINATION (2018)
6D dual superconformal algebra (2020)
Soustava s ultrahydrofobními vlastnostmi (2018)
MODIFICATION OF VARIOUS POLYMER SURFACES USING ATMOSPHERIC PRESSURE REDUCING PLASMA (2019)
EFFECT OF COLD ATMOSPHERIC PRESSURE PLASMA GENERATED BY DIFFUSE COPLANAR SURFACE BARRIER DISCHARGE ON POLY(2-OXAZOLINE) THIN FILMS (2019)
Roll-to-roll surface etching of polymers using hydrogen plasma at atmospheric pressure (2018)
PLASMA PENCIL IN ANALYTICAL SPECTROCHEMISTRY – ACHIEVEMENTS AND PROSPECTS (2018)
MATRIX EFFECTS IN PLASMA PENCIL AND ANALYSIS OF REAL SAMPLES (2018)
PLASMA PENCIL EMISSION RESPONSE ON COMBINED MATRIX SOLUTIONS (2018)
Zařízení pro dekontaminaci vzdušnin znečištěných uhlovodíky (2018)
Plasma activation of polyamide foils for their wettability and adhesion improvement (2019)
Automatizovaný plazmový aktivátor jemné práškové suroviny pomocí koplanárního bariérového výboje (2019)
Tracking the evolution of rotating electrode gliding arc discharge channels using fast-framing camera and electrical diagnostics (2019)
Effect of DCSBD plasma treatment on surface properties of thermally modified wood (2019)
Nanostructures on thermally modified wood after DCSBD plasma treatment (2019)
Cold atmospheric plasma treatment of poly(2-oxazoline) thin films by diffuse coplanar surface barrier discharge (2019)
Acrylic acid polymerization on polypropylene nonwoven textile initiated by plasma of diaphragm discharge (2019)
Optimization of atmospheric pressure plasma treatment of polyamide foils for wettability and adhesion properties improvement (2019)
Ceramic processing of DBD plasma activated powders: the analysis of surface changes (2019)
Scientific report on biofilm decontamination efficiency of plasma-activated water vapour and steam using Multi-hollow surface dielectric barrier discharge (2019)
Porovnání metod kvantifikace biofilmu: Start of Growth Time (SGT) a kvantifikace pomocí CFU (2019)
Large area cleaning and activation of float glass by atmospheric pressure plasma as a pre-treatment phase of functional glass manufacturing process (2019)
Průběžná výzkumná zpráva k projektu Optimalizace plazmové úpravy obalových materiálů používaných v masném průmyslu vedoucí ke zlepšení jejich adhezních vlastností (2018)
Závěrečná výzkumná zpráva k projektu Optimalizace plazmové úpravy obalových materiálů používaných v masném průmyslu vedoucí ke zlepšení jejich adhezních vlastností (2019)
Zařízení pro plazmovou úpravu tubulárních fólií (2019)
A unique atmospheric-pressure plasma technology for low-cost industrial surface treatments of materials (2019)
STRUCTURING OF POLYMETHYLMETHACRYLATE SUBSTRATES BY REDUCING PLASMA (2019)
Low-temperature hydrogen plasma for large-area surface modification (reduction and etching) of materials (2016)
Symmetrical and asymmetrical multi-hollow surface dielectric barrier discharge configurations and their fundamental parameters (2019)
Effect of various types of surface dielectric barrier discharge on seeds of maize and pea (2019)
Atmospheric pressure plasma treatment of wheat seeds in ambient air (2019)
Electrospinning of hyaluronan/polyvinyl alcohol in presence ofin-situ silver nanoparticles: Preparation and characterization (2019)
Application of dielectric barrier plasma treatment in the nanofiber processing (2019)
LA-ICP-MS analysis of metal layers on samples of cultural heritage (2019)
ROTATING GLIDING ARC: INNOVATIVE SOURCE FOR VOC REMEDIATION (2019)
Atomic layer deposition of copper (I) bromide wide bandgap semiconductors (2019)
A Study on the Effect of Ambient Air Plasma Treatment on the Properties of Methylammonium Lead Halide Perovskite Films (2019)
Photofragmentation laser-induced fluorescence of ozone: an in situ tool for precise mapping of ozone concentration in non-thermal plasmas (2019)
DIAGNOSTICS OF PLASMA PENCIL DISCHARGE FOR CHEMICAL ANALYSIS (2019)
Efficiency of Ozone Production in Coplanar Dielectric Barrier Discharge (2019)
Solar photocatalytic disinfection using ink-jet printed composite TiO2/SiO2 thin films on flexible substrate: Applicability to drinking and marine water (2019)
Effect of atmospheric pressure plasma on surface modification of paper (2019)
Cold atmospheric pressure plasma facilitated nano-structuring of thermally modified wood (2019)
Wettability Changes and Surface Structuring of Polyethylene Terephthalate in H2/N2 Atmospheric Pressure Plasma (2019)
Atmospheric Pressure Plasma Cleaning and Activation of Float Soda-Lime Glass Prior to Lamination Processing (2019)
Optimization and influence of multi-hollow surface dielectric barrier discharge plasma operating conditions on the physical quality of peanut (2019)
Multi-hollow surface dielectric barrier discharge for plasma treatment of patterned silicon surfaces (2019)
Electrical properties of alumina-based ceramic barrier layers for dielectric barrier discharge (2019)
Decontamination Effect of the Novel Water Vapor Plasma Generator Prototype on Staphylococcal and Pseudomonas Aeruginosa Biofilms (2019)
Decontamination effect of the novel water vapor plasma generator prototype on staphylococcal biofilm (2019)
Adaptivní dělič vysokého napětí (2019)
Ruční zařízení pro povrchovou úpravu pevných, neporézních, rovinných materiálů ze skupiny sklo, kovy, polymery, plazmatem povrchového DBD výboje vedeného s vysokou přesností v efektivní vzdálenosti od substrátu (2018)
Plazmové zařízení pro precizní kontinuální ošetření povrchu velkoplošného skla s možností In-line integrace do výrobní linky (2019)
Technologie bezkontaktního vedení DCSBD výbojové jednotky v přesné vzdálenosti od rovinného skla (2017)
Technologie vedení DCSBD výbojové jednotky nad rovinným velkoplošným sklem v přesně definované vzdálenosti určené třemi kontaktními body (2018)
PREPARATION OF Al2O3 NANOFIBRES AND THEIR SURFACE PLASMA TREATMENT (2019)
Ellipsometry, reflectance, and photoluminescence of nanocrystalline CuCl thin films on silicon (2019)
2D MoS2 nanosheets on 1D anodic TiO2 nanotube layers: efficient co-catalyst for liquid and gas phase photocatalysis (2019)
Fast large-area precleaning and activation of float soda-lime glass using non-thermal plasma at atmospheric pressure (2019)
Deposition of silver ions onto DBD and DCSBD plasma treated nonwoven polypropylene (2012)
Cleaning and activation of float glasses by areal atmospheric pressure plasmas – a treatment procedure prior to coating (2019)
Optimization of polyamide foils adhesion properties used as casings for meat products by atmospheric pressure plasma treatment (2019)
Plasma polymerization of acrylic acid on polypropylene nonwovens and foils initiated by diaphragm discharge (2019)
Deposition of Gold Nanoparticles on Polypropylene Nonwoven Pretreated by Dielectric Barrier Discharge and Diffuse Coplanar Surface Barrier Discharge (2013)
Effect of plasma treatment on seeds before coating with agrochemicals and its influence on seeds dustiness (2019)
Hydrophilic Poly(2-Oxazoline) Coatings Prepared By Non-Equilibrium “Cold” Atmospheric Pressure Plasma (2019)
Hydrophilic poly(2-oxazoline) coatings on PTFE surface promoting cell adhesion prepared by “cold” atmospheric pressure plasma (2019)
Reducing Atmospheric Plasma for Plasma Modification of Materials (2019)
Effect of DCSBD Plasma Treatment on Surface Properties of Thermally Modified Wood (2019)
Flexible Ceramic Substrates for Use as Dielectric Barrier Layer (2019)
HV Generators for DCSBD Discharges and Their Properties (2019)
RC-Probe and Peaks Suppression in DBD Voltage Measurements (2019)
Multi-Hollow Surface Dielectric Barrier Discharge for Decontamination (2019)
Influence of dielectric barrier composition on electrical properties of coplanar dielectric barrier discharge (2019)
Low-temperature plasma technology for nano-structuring and etching of large-area polymeric substrates (2019)
Verification of positive streamer mechanism for negative corona Trichel pulses in O-2/H-2 mixtures (2014)
Chitosan immobilization to the polypropylene nonwoven after activation in atmospheric - pressure nitrogen plasma (2015)
Layer-by-layer assembly of thin organic films on PTFE activated by cold atmospheric plasma (2015)
Polylactic acid surface activation by atmospheric pressure dielectric barrier discharge plasma (2015)
Zařízení pro generování plazmatem aktivované páry nebo aerosolu použitím proudícího plynu s podstatným podílem vodních par (2019)
Change of fundamental properties of dielectric barrier discharge due to the alumina-based barrier layer composition (2020)
MICRO-HOLLOW SURFACE DIELECTRIC BARRIER DISCHARGES FOR DECONTAMINATION OF BACTERIAL BIOFILM (2018)
DEVELOPMENT OF ADVANCED DIELECTRIC BARRIER DISCHARGE WITH FLEXIBLE CERAMIC BARRIER LAYER (2018)
Impact of Storage Conditions on Electrophoretic Deposition Performance of Plasma Pre-treated Al2O3 Ceramic Powders — A Study of Ageing Effect (2019)
A New Approach to the Crystallization of Perovskite Films by Cold Hydrogen Atmospheric Pressure Plasma (2020)
Průzkum a restaurování rukopisu profesora Roberta Konečného (2019)
Souhrnná výzkumná zpráva zabývající se použitím plazmového zdroje na předúpravu osiva (2019)
Plazmový zdroj pro předúpravu osiva před mořením (2019)
Ověřená technologie redukční atmosférické plazmy pro modifikaci flexibilních materiálů (2019)
1st Plasma for Nanotechnology and Bioapplications Workshop. Scientific Program & Book of Abstract (2019)
1st Plasma for Nanotechnology and Bioapplications Workshop. Scientific Program & Book of Abstract (2019)
Effects of acid, sodium and its salt counterions on the atomic emission of copper and zinc in plasma pencil (2019)
Projektová dokumentace k zařízení na měření prašnosti mořeného osiva (2019)
Zařízení pro plazmovou úpravu vzdušnin kontaminovaných amoniakem (2019)
Atmospheric Pressure Plasma Cleaning and Activation of Float Soda-Lime Glass Prior to Lamination Processing (2020)
Perovskitový solární článek s využitím mezoporézní fotoanody (2019)
Atomic layer deposition of copper (I) chloride using liquid 1-chlorobutane precursor (2019)
Large area roll-to-roll processing of flexible polymers by atmospheric pressure hydrogen plasma (2018)
Low-temperature hydrogen plasma for large-area surface modification of materials (2019)
Plasma hardening of sol-gel coatings (2018)
Deposition of Copper Halide Films for Optoelectronic Applications (2019)
Atomic Layer Deposition of MoSe2 Using New Selenium Precursors (2020)
Cyclic Silylselenides: Convenient Selenium Precursors for Atomic Layer Deposition (2020)
PLASMA ASSISTED CALCINATION OF POLYMER/PRECURSOR FIBERS (2016)
Low-Temperature Hydrogen Plasma Reduction of Graphene Oxide Counter Electrodes for Printed Dye-Sensitized Solar Cells (2020)
Atmospheric Plasma Treatment of ITO Thin Films for Rapid Manufacturing of Perovskite Solar Cells (2020)
Low-Cost and High-Speed Atmospheric Plasma Processing of Perovskite Thin Films (2020)
Large-Area Roll-to-Roll Atmospheric Plasma Treatment of Nanocellulose Transparent Paper (2020)
Přírodovědecká fakulta MU proti COVID-19: výroba nanovlákenných filtrů do dobrovolnicky šitých roušek (2020)
Streamer breakdown: cathode spot formation, Trichel pulses and cathode-sheath instabilities (2020)
Surface modification of clay-coated paper by atmospheric-pressure plasma in air (2020)
Laser-induced crystallization of anodic TiO2 nanotube layers (2020)
How various plasma sources may affect seed germination and growth (2012)
Cold atmospheric pressure plasma: simple and efficient strategy for preparation of poly(2-oxazoline)-based coatings designed for biomedical applications (2020)
A comparison of photolytic, photochemical and photocatalytic processes for disinfection of recirculation aquaculture systems (RAS) streams (2020)
Optimization of TiO2 Mesoporous Photoanodes Prepared by Inkjet Printing and Low-Temperature Plasma Processing (2020)
Preparation and characterization of alumina submicron fibers by plasma assisted calcination (2020)
UNDERWATER DISCHARGE METHOD FOR TEATMENT OF TEXTILE MATERIALS (2011)
Surface plasma treatment of the electrospun TiO 2 /PVP composite fibers in different atmospheres (2020)
Properties of MgAl2O4 doped alumina barrier layers for dielectric barrier discharge (2020)
Synthesis of high surface area aluminophosphate and -phosphonate xerogels by non-hydrolytic sol-gel reactions (2021)
Solution to the perturbation of LIF measurements via photodissociation, OH measurement in atmospheric-pressure multihollow DBD (2020)
Hyaluronan biofilms reinforced with partially deacetylated chitin nanowhiskers: Extraction, fabrication, in-vitro and antibacterial properties of advanced nanocomposites (2020)
Selective Plasma Etching of Polymer-Metal Mesh Foil in Large-Area Hydrogen Atmospheric Pressure Plasma (2020)
Influence of Composition and Plasma Power on Properties of Film from Biodegradable Polymer Blends (2020)
The effect of ambient air plasma generated by coplanar and volume dielectric barrier discharge on the surface characteristics of polyamide foils (2021)
Robust current peak detection method for dielectric barrier discharges (2021)
Water-born 3D nanofiber mats using cost-effective centrifugal spinning: comparison with electrospinning process: A complex study (2021)
The effect of nanoparticle presence on aerosol formation during nanoparticle-enhanced laser ablation inductively coupled plasma mass spectrometry (2020)
Influence of sample surface topography on laser ablation process (2021)
Závěrečná zpráva projektu Ověření tepelné vodivosti kompozitních vrstev s obsahem plazmatem redukovaného grafen-oxidu pro budoucí tepelné chladiče světel pro automobilový průmysl (2020)
Surface Property Tuning of Methylammonium Lead Iodide byPlasma for Use in Planar Perovskite Solar Cells (2020)
Multi-hollow surface dielectric barrier discharge: an ozone generator with flexible performance and supreme efficiency (2020)
Adhesive Properties of Silicone-Coated Release Liner Paper Enhanced by Atmospheric Pressure Plasma Pre- and Post-Treatment (2020)
Atomic Layer Deposition of MoSe2 Nanosheets on TiO2 Nanotube Arrays for Photocatalytic Dye Degradation and Electrocatalytic Hydrogen Evolution (2020)
Perovskite Solar Cells with Low-Cost TiO2 Mesoporous Photoanodes Prepared by Rapid Low-Temperature (70 degrees C) Plasma Processing (2020)
Graphene oxide sensors of high sensitivity fabricated using cold atmospheric-pressure hydrogen plasma for use in the detection of small organic molecules (2020)
Low-Temperature Mineralisation of Titania-Siloxane Composite Layers (2021)
Plasma Treatment of Thermally Modified and Unmodified Norway Spruce Wood by Diffuse Coplanar Surface Barrier Discharge (2021)
On the Constitution and Thermodynamic Modeling of the Phase Diagrams Nb-Mn and Ta-Mn (2021)
An Ab Initio Study of Pressure-Induced Changes of Magnetism in Austenitic Stoichiometric Ni2MnSn (2021)
Inovace předmětu Výboje v plynech (F3180)-Generace klouzavého obloukového výboje a demonstrace vlivu napájení (2020)
Výzkumná zpráva z první etapy řešení projektu FV40114 - Zlepšení adheze UV digitálního tisku na povrchu velkoplošného skla s využitím atmosférického plazmatu (2020)
Multi-Hollow Surface Dielectric Barrier Discharge for Bacterial Biofilm Decontamination (2021)
Effect of plasma sizing on basalt fibers adhesion with wood-working resins (2021)
Rapid Atmospheric Pressure Ambient Air Plasma Functionalization of Poly(styrene) and Poly(ethersulfone) Foils (2021)
Impact of atmospheric pressure plasma treatment on surface metallization of CFRP composites (2021)
Preparation of al2o3 nanofibres and their surface plasma treatment (2020)
Sada vzorků plazmatem upravených nanovláken pro filtrační účely (2020)
2D MoTe2 nanosheets by atomic layer deposition: Excellent photo- electrocatalytic properties (2021)
Non-hydrolytic sol-gel as a versatile route for the preparation of hybrid heterogeneous catalysts (2021)
Roll-to-roll plazmový modul pro kontinuální povrchovou modifikaci flexibilních fotonických vrstev (2020)
Thermal stability of Ti/Ni multilayer Thin films (2021)
Large area cleaning and activation of flexible ultra-thin glass by non-thermal atmospheric-pressure plasma (2021)
Therapeutic effect of cold atmospheric plasma and its combination with radiation as a novel approach on inhibiting cervical cancer cell growth (HeLa cells) (2021)
Low‐Temperature and Rapid Deposition of an SnO2 Layer from a Colloidal Nanoparticle Dispersion for Use in Planar Perovskite Solar Cells (2021)
The effect of rapid atmospheric plasma treatment of FTO substrates on the quality of TiO2 blocking layers for printed perovskite solar cells (2021)
The Industrially Deposited W-B-C Coatings from Segmented Target (2021)
ZÁVĚREČNÁ ZPRÁVA O ŘEŠENÍ PROBLEMATIKY VZORKŮ ELEMENTÁRNÍHO FOSFORU (2021)
Protokol o ověření technologie pro Plazmatem asistovanou úpravu nanovláken pro filtrační účely (2021)
Deposition of MoSe2 flakes using cyclic selenides (2021)
Výzkumná zpráva smluvního výzkumu Nanohybrid I (2021)
Výzkumná zpráva smluvního výzkumu Nanohybrid II. (2021)
On the transition of reaction pathway during microwave plasma gas-phase synthesis of graphene nanosheets: From amorphous to highly crystalline structure (2021)
Stability of trimethylsilyl acetate-based plasma polymers towards atmospheric and water environments (2021)
Technologie zvýšení adheze barev velkoplošného UV digitálního tisku ke skleněným a polymerním substrátům aktivací atmosférickým plazmatem (2020)
Conductive silver films on paper prepared by atmospheric pressure argon plasma conversion of silver nitrate (2021)
Structural and magnetic properties of Fe-oxide layers prepared by inkjet printing on Si-substrate (2021)
The effect of atmospheric cold plasma cleaning of FTO substrates on the quality of TiO2 electron transport layers for printed carbon-based perovskite solar cells (2021)
Organosilicon plasma polymers deposited in trimethylsilyl acetate/CH4 plasma of capacitively coupled RF glow discharge (2021)
Preparation of Al2O3 Nanofibers by Thermal Calcination with Low Temperature Plasma Pre-treatment (2020)
Enhancing mechanical properties and cutting performance of industrially sputtered AlCrN coatings by inducing cathodic arc glow discharge (2021)
Microstructure of titanium coatings controlled by pulse sequence in multipulse HiPIMS (2021)
Pressure study of magnetism in off-stoichiometric Ni2MnSn-based alloys (2021)
Inactivation of simulated aquaculture stream bacteria at low temperature using advanced UVA- and solar-based oxidation methods (2021)
Low-Temperature Atmospheric Pressure Plasma for Applications in Flexible and Printed Electronics (2022)
Výzkumná zpráva smluvního výzkumu Nanohybrid III. (2021)
Microwave plasma-based high temperature dehydrogenation of hydrocarbons and alcohols as a single route to highly efficient gas phase synthesis of freestanding graphene (2021)
2nd Plasma Nanotechnologies and Bioapplications Workshop (2021)
2nd Plasma Nanotechnologies and Bioapplications Workshop (2021)
Optimisation of the DCSBD roll-to-roll treatment of LLDPE/PA tubular foil using rollers of different electrical resistance (2021)
BOPP foil surface treatment by ambient air volume and coplanar dielectric barrier discharge in roll-to-roll configuration (2021)
Plasma activation of various industrially used materials for UV-digital printing applications (2021)
Atmospheric-pressure plasma treatment of ultra-thin flexible glass for deposition of conductive layers (2021)
Surface modification of PTFE by atmospheric pressure plasma (2021)
Measurements of the nanofibers adhesion to the carrier substrates (2021)
The effect of plasma on the efficiency of nanofiber filters (2021)
Effects of plasma treatment on photocatalytic properties of inorganic nanofibers (2021)
Comparative study for investigation of BOPP foil surface treatment by different atmospheric-pressure plasma sources (2021)
RF plasma nozzle for analytical chemistry (2021)
Recent developments in applications of plasma to the manufacture of flexible solar cells (2021)
Low temperature plasma treatment of MAPI perovskite (2021)
Atmospheric pressure plasma engineering of functional coatings and interfaces (2021)
Magnetic layers for applications in printed electronics (2021)
Plasma-triggered reduction-exfoliation of highly porous graphene oxide 3D materials (2021)
Selection of special dielectric substrates for electrostatic voltage measurement (2021)
Higher harmonic frequencies in a capacitively coupled plasma (2021)
The effect of secondary dopants on screen-printed PEDOT:PSS counter-electrodes for dye-sensitized solar cells (2022)
Effect of hydrostatic pressure on magneto-crystalline anisotropy of Heusler Ni2MnSn-based alloy (2021)
Multifunctional magnetic biopolymer nanofibers for health applications (2021)
Multifunctional Electrospun Nanofibers Based on Biopolymer Blends and Magnetic Tubular Halloysite for Medical Applications (2021)
Changes in Surface Characteristics of BOPP Foil after Treatment by Ambient Air Plasma Generated by Coplanar and Volume Dielectric Barrier Discharge (2021)
Diffuse coplanar surface barrier discharge (DCSBD) plasma treatment as a part of technology for manufacturing of nanofiber-based filters (2021)
TECHNOLOGY FOR NANOFIBER’S SUBSTRATES ATMOSPHERIC PRESSURE PLASMA TREATMENT (2021)
On the Structure and Mechanical Properties of X2BC Coatings Prepared by High Power Impulse Magnetron Sputtering at Different Temperatures (2021)
Chemical shift in W-B-C systems: experiments and modeling (2021)
Phase formation, thermal stability and mechanical properties of Nb-B-C thin films prepared by magnetron sputtering using a combinatorial approach (2021)
Non-hydrolytic sol-gel route to a family of hybrid mesoporous aluminosilicate ethanol dehydration catalysts (2021)
Comparison of HMDSO and HMDSZ thin films growth under dusty plasma conditions (2021)
UVA and solar driven photocatalysis with rGO/TiO2/polysiloxane for inactivation of pathogens in recirculation aquaculture systems (RAS) streams (2022)
Zařízení pro depozici porézních vrstev na bázi oxidu grafenu (2021)
Electric signals measured during plasma thin-film etching and their connection to the electron concentration and the properties of the treated surface (2022)
ZnO nanofibers prepared by plasma assisted calcination: Characterization and photocatalytic properties (2022)
Atmospheric reducing plasma modification of PTFE for adhesion improvement (2021)
Roll-to-roll cleaning and activation of ultra-thin flexible glass using atmospheric-pressure plasma in ambient air (2021)
A quantum mechanical study of pressure induced changes of magnetism in austenitic stoichiometric Ni2MnSn (2021)
Structure and properties of novel nanocomposites formed by intermetallic compounds (2021)
Technologie zvýšení adheze barev velkoplošného UV digitálního tisku ke kovovým substrátům s polymerní vrstvou aktivací atmosférickým plazmatem (2021)
Výzkumná zpráva z třetí etapy řešení projektu FV40114 - Zvýšení kvality velkoplošného UV digitálního tisku atmosférickým plazmatem (PE-Al) (2021)
Generace aktivního dekontaminačního média pomocí povrchových bariérových výbojů (2021)
Priebeh mikrobiologických testov a výsledky dekontaminácie v aktívnej plynnej atmosfére s obsahom ozónu a peroxidu vodíka v plynnej fáze (2021)
Riešenie napúšťania komory plynnými produktami povrchových bariérových výbojov (2021)
Jak přepracovat fosforový odpad? (2021)
Study of the effect of plasma on the efficiency of nanofiber filters (2021)
Rozdiel účinku rifampicínu na staticky a dynamicky kultivovaný bakteriálny biofilm (2021)
Skleněný nosník (skleněná žiletka) o rozměrech 25 cm x 450 cm (2021)
Verified technology for the optimized plasma treatment of non-woven substrate to enhance the adhesion of electrospun nanofibers (2021)
Verified technology for the optimized plasma treatment of fiberglass and polyester meshes to enhance the adhesion of electrospun nanofibers (2021)
Nanofibers layer deposited on the polypropylene non-woven textile for water filters production with the enhanced properties due to potential implementation of plasma technology to the manufacturing process (2021)
Nanofibers layer deposited on the hydrophobic fiberglass mesh and polypropylene non-woven textile for air filters production with the enhanced properties due to potential implementation of plasma technology to the manufacturing process (2021)
Pressure-Induced Increase of the Total Magnetic Moment in Ferrimagnetic Ni1.9375Mn1.5625Sn0.5 Martensite: A Quantum-Mechanical Study (2022)
Plazmatem redukovaný sheet oxidu grafenu (2022)
Funkční vzorek velkoplošné flexibilní mezoporezní TiO2/SiO2 vrstvy vyrobené integrovaným R2R modulem v součinnosti s ovrstvovací R2R linkou (2021)
Zařízení pro plazmovou modifikaci velkoplošného rovinného substrátu před potiskem (2022)
Zařízení pro in-line redukci GO sheetu atmosférickým plazmatem (2022)
Symplectic Grassmannians, dual conformal symmetry and 4-point amplitudes in 6D (2022)
Zařízení pro výrobu nanovláken a mikrovláken upravených nízkoteplotním plazmatem (2022)
High conductive rGO sheets fabricated by mild, low-cost and scalable plasma-triggered reduction-exfoliation of 3D aerogel-like graphene oxide (2022)
Structural and physical characterization of iron-oxide based inks for inkjet printing (2022)
Plasma-treatment applications for fabricating third-generation solar cells (2022)
Souhrnná zpráva - Zvýšení kvality velkoplošného UV digitálního tisku atmosférickým plazmatem (FV40114) (2022)
Higher harmonic frequencies of discharge voltage and current in a capacitively coupled plasma (2022)
Adhesion improvement of LLDPE/PA tubular foil used as sausage casing after a very short atmospheric-pressure roll-to-roll plasma treatment (2022)
Photocatalytic water treatment by nanocomposites processed using low temperature plasma (2022)
Modification of nanocellulose films in deep eutectic solvents using vinyl esters (2022)
Atomic layer deposition of oxide coatings on porous metal and polymer structures fabricated by additive manufacturing methods (laser-based powder bed fusion, material extrusion, material jetting) (2022)
Recent developments in applications of plasma to the manufacture of flexible solar cells (2022)
The effects of non-thermal plasma treatment on the structural and functional parameters of human spermatozoa (2022)
Optimization of plasma-activated media generation for decontamination of thermally sensitive materials (2022)
Dry cleaning and activation of flexible glass using nonthermal plasma before PEDOT:PSS coating (2022)
Preparation of protective hydrophobic layers on aluminum using plasma polymerization at atmospheric pressure (2022)
Adhesion improvement of large area flexible PTFE foils by atmospheric pressure plasma (2022)
Applications of surface dielectric barrier discharge generated from liquid electrode (2022)
Comparative study of the different cold atmospheric-pressure plasma sources' effects on the surface modification of thermally sensitive BOPP film (2022)
In-line plasma pre- and post-treatment as parts of technology for manufacturing of nanofiber-based filters with the improved performance properties (2022)
The wide range optical spectrum characterization of the silicon and oxygen doped diamond like carbon inhomogeneous thin films (2022)
Promising effect of topical antimicrobial ‘biobetters’ against methicillin-resistant Staphylococcus aureus strains (2022)
The impact of disorder on the 4O-martensite of Ni-Mn-Sn Heusler alloy (2022)
Alumina ceramic tapes doped by various dopants and their effect on properties of coplanar dielectric barrier discharge (2022)
Properties of Cr-doped Al2O3 as a dielectric barrier layer (2022)
AIR PLASMA TREATMENT FOR IMPROVING THE SAFETY PROPERTIES OF LAMINATED GLASSES CONTAINING IONOPLAST INTERLAYER USED IN CIVIL ENGINEERING (2022)
ULTRA-FAST LOW TEMPERATURE ATMOSPHERIC PLASMA TRIGGERED REDUCTION-EXFOLIATION OF HIGHLY POROUS AEROGEL-LIKE GRAPHENE OXIDE (2022)
High quality UV digital printing on various materials with plasma enhanced surface (2022)
Staphylococcus aureus jako příčina infekčních komplikací v oblasti kůže a měkkých tkání: nové možnosti terapie antimikrobiálními enzymy (2022)
Highly Efficient Antibacterial Polymer Composites Based on Hydrophobic Riboflavin Carbon Polymerized Dots (2022)
Comparison of different atmospheric-pressure plasma sources for controlled decomposition of organic thin-films (2022)
Remote atmospheric plasma activation of the SentryGlas ionoplast interlayer for adhesion improvement (2022)
Plasma Processing: an Essential Part of Nanofibrous Composite Engineering (2022)
Atmospheric plasma as a source of chemically active species for low-temperature processing of materials (2022)
Improvement of Properties of Laminated Glass Containing Ionoplast Interlayer for Civil Engineering Applications by Atmospheric-Pressure Low-Temperature Plasma Discharge (2022)
Carbon quantum dots boosted by plasma generated with multi-hollow discharge to improve antibacterial effect (2022)
Bio-dekontaminačná komora na báze plazmou aktivovaného dekontaminačného média (2022)
Influence of the argon ratio on the structure and properties of thin films prepared using PECVD in TMSAc/Ar mixtures (2023)
Přítomnost a budoucnost enzybiotik v terapii infekčních komplikací v oblasti popálené plochy způsobené kmeny Staphylococcus aureus (2022)
Staphylococcus aureus jako původce infekčních komplikací kůže a měkkých tkání: současné a budoucí terapeutické možnosti (2022)
Micro-Hollow Surface Dielectric Barrier Discharges for Decontamination of Bacterial Biofilm (2021)
Development of Advanced Dielectric Barrier Discharge with Flexible Ceramic Barrier Layer (2021)
Industrially deposited hard and damage resistant W-B-C coatings (2023)
Karboxymethylcelulózový hydrogel obohacený o enzym lysostafin vykazující antimikrobiální aktivitu vůči meticilin- resistentní bakterii Staphylococcus aureus (2022)
Nanocrystalline TiO2/Ti3C2Tx MXene composites with a tunable work function prepared using atmospheric pressure oxygen plasma (2023)
Antimikrobiálny účinok hydrogélu na báze Gum Karaye v kombinácii s fágovým preparátom na meticilín rezistentné kmene Staphylococcus aureus (2022)
Testing of antimicrobial effect of hydrogel matrix based on Gum Karaya resin supplemented by the phage preparation on methicillin-resistant Staphylococcus aureus strains on animal model. (2022)
Photocatalytic activity of iron oxide and graphitic carbon nitride films in water under UVA and visible light (2022)
Plasma oxidation of printed polysiloxane layers (2021)
Hydrophilization of polyvinylidene fluoride (PVDF) nanofibers by plasma treatment and its effect on nanoparticle deposition (2021)
Způsob spuštění samovolně se šířícího procesu redukce-exfoliace oxidu grafenu v porézním materiálu (2022)
MAGNETRON SPUTTERING DEPOSITION OF HIGH ENTROPY NITRIDES FROM CHROMIUM-HAFNIUM-MOLYBDENUM-TANTALUM-WOLFRAM SYSTEM (2021)
AL2O3-TA2O5 MULTILAYER THIN FILMS DEPOSITED BY PULSED DIRECT CURRENT MAGNETRON SPUTTERING FOR DIELECTRIC APPLICATIONS (2021)
STUDY OF THE EFFECT OF PLASMA ON THE EFFICIENCY OF NANOFIBER FILTERS (2021)
STUDY OF W-X BONDS IN AMORPHOUS W-B-C (2021)
Adhesion improvement on the inner side of LLDPE/PA tubular film exposed to DCSBD roll-to-roll plasma system from the outer side of the film (2023)
Decontamination of Raspberries Inoculated with Enterococcus Faecium Bacteria Using Plasma-Activated Gaseous Media (2023)
Multilayer thin films of aluminum oxide and tantalum oxide deposited by pulsed direct current magnetron sputtering for dielectric applications (2023)
Phase formation of powders sputtered from X2BC targets and XC+XB powder mixtures {X = Nb, Ta, W} (2023)
Dynamic Impact Resistance and Scratch Adhesion of AlCrN Coatings Sputtered Using Cathodic Arc Glow Discharge (2023)
DIFFUSE COPLANAR SURFACE BARRIER DISCHARGE PLASMA TREATMENT AS A PART OF TECHNOLOGY FOR MANUFACTURING OF NANOFIBER-BASED FILTERS (2021)
INDUSTRIAL MAGNETRON SPUTTERING OF ZRN/CU NANOSTRUCTURED COATINGS FOR ANTI-BACTERIAL PURPOSES (2021)
ANOMALOUS PRESSURE-INDUCED CHANGES IN MAGNETISM OF FERRIMAGNETIC NI-MN-SN STRUCTURES (2021)
Univerzální uchycení plazmové jednotky do UV tiskařského stroje (2022)
Vrstvené sklo velikosti 1 x 2 m (2022)
Zařízení pro zlepšení povrchových vlastností skla pro výrobu VBS (2022)
Zařízení pro úpravu adhezních vlastností polymerních fólií a desek, zejména určených k výrobě vrstveného bezpečnostního skla (2022)
Electron beam irradiation as a straightforward way to produce tailorable non-biofouling poly(2-methyl-2-oxazoline) hydrogel layers on different substrates (2023)
Describing the multipulse HiPIMS deposition (2023)
Dynamics of sputtered particles in multipulse HiPIMS discharge (2023)
Enhanced Adhesion of Electrospun Polycaprolactone Nanofibers to Plasma-Modified Polypropylene Fabric (2023)
Controlling Size and Morphology of Copper and Copper-Nickel Nanoparticles Supported on Porous Silica for Catalytic Ethanol Dehydrogenation (2021)
Atmospheric-pressure air plasma sources for cleaning and activation of float soda-lime glass: Effects and comparison (2023)
Plasma-enhanced immobilization of cerium oxide nanoparticles on a fluorocarbon-based nanofibrous membranes (2023)
Improve adhesion of electrospun nanofibers to plasma-treated polypropylene textile (2023)
Temporal, spatial and spectroscopic study of plasma emission on Cu target in bipolar HiPIMS (2023)
Fast, scalable, and environmentally friendly method for production of stand-alone ultrathin reduced graphene oxide paper (2023)
The Multi-Hollow Surface Dielectric Barrier Discharge Usage for the Seeds' Treatment Aimed to the Dustiness Decrease of Free-Floating Particles from Agrochemicals (2023)
Comparative investigation of BOPP foil surface treatment using various atmospheric-pressure plasma sources (2023)
Rapid, low-temperature, air plasma sintering of mesoporous titania electron transporting layers in perovskite solar cells (2023)
The 3rd Plasma Nanotechnologies and Bioapplications Workshop. Scientific Program & Book of Abstracts (2023)
The 3rd Plasma Nanotechnologies and Bioapplications Workshop. Scientific Program & Book of Abstracts (2023)
CR-DOPED ALUMINA CERAMICS AND THEIR PROPERTIES (2023)
RECENT DEVELOPMENTS IN ELECTRONICS FOR DBD AND MEASUREMENTS (2023)
NEW LOW TEMPERATURE ATMOSPHERIC PLASMA SOURCE FOR REMOTE PLASMA SURFACE MODIFICATION OF MATERIALS (2023)
ATMOSPHERIC PRESSURE PLASMA DIAGNOSTICS BY ION MOBILITY SPECTROMETRY AND MASS SPECTROMETRY (2023)
MEASUREMENT OF OZONE CONCENTRATION PRODUCED BY MSDBD (2023)
ATMOSPHERIC PLASMA TECHNOLOGY FOR LARGE AREA MODIFICATION OF FLOAT GLASS AND POLYMER INTERLAYERS FOR LAMINATED GLASS (2023)
SURFACE TREATMENT OF GLASS AND ITS INFLUENCE ON THE RELIABILITY OF ADHESIVE BONDING (2023)
EFFECTS OF AMBIENT AIR PLASMA ON FLEXIBLE GLASS BEFORE DEPOSITION OF PEDOT:PSS THIN FILMS: IN-DEPTH XPS ANALYSIS (2023)
QUANTIFYING THE CHEMICAL COMPOUNDS THAT EMERGE DURING THE POLYMER PROCESSING BY A SURFACE DIELECTRIC BARRIER DISCHARGE UTILIZING LIQUID ELECTRODES (2023)
COMPARATIVE STUDY OF THE EFFICACY OF NITROGEN FIXATION AND FUNGAL GROWTH INHIBITION BY VARIOUS ATMOSPHERICPRESSURE PLASMA SOURCES (2023)
LOW-COST BIOCHAR SORBENTS FOR ELIMINATING PHARMACEUTICALS AND DRUGS FROM WASTEWATERS (2023)
TOWARDS PURIFICATION OF WATER FROM ANTIBIOTICS USING PHOTOCATALYTIC AND PLASMA PROCESSES (2023)
PREPARING THE ELECTROSPUN NANOFIBERS AS A DRUG DELIVERY SUBSTRATE (SYSTEM) ASSISTED BY ATMOSPHERIC PLASMA (2023)
ATMOSPHERIC PRESSURE PLASMA-ACTIVATED GASEOUS MEDIA AND ITS IMPLEMENTATION INTO DECONTAMINATION PROCESS (2023)
FAST PLASMA-TRIGGERED REDUCTION-EXFOLIATION OF GRAPHENE OXIDE AND ITS APPLICATIONS (2023)
SORPTION AND ELECTROCHEMICAL PROPERTIES OF PLASMA REDUCED GRAPHENE OXIDE PAPER (2023)
COMPARATIVE STUDY OF DIFFERENT ATMOSPHERIC-PRESSURE PLASMA SOURCES FOR SURFACE TREATMENT OF BOPP FOIL (2023)
CHALLENGES IN CREATING FUNCTIONAL LAYERS THROUGH ATMOSPHERIC PRESSURE PLASMA POLYMERIZATION (2023)
LOW-TEMPERATURE ATMOSPHERIC PRESSURE PLASMA CROSSLINKING OF POLYSILAZANES COATING (2023)
INFLUENCE OF GAS TEMPERATURE ON GASEOUS PRODUCTS GENERATED BY COPLANAR BARRIER DISCHARGE IN AIR AND N2/O2 MIXTURES (2023)
Synthesis and characterization of the ceramic refractory metal high entropy nitride and carbide thin films from Cr-Hf-Mo-Ta-W system (2023)
Zirconium-based thin film metallic glasses prepared by magnetron sputtering (2023)
Adhesion improvement of PTFE and Ionoplast polymers by plasma surface modification using DCSBD and a new DCSBD-derived plasma systems (2023)
Roll-to-roll plasma treatment of tubular plastic casings treated from outer side with the effect on both sides (2023)
Plasma cleaning and activation of flexible glass before coating with PEDOT:PSS (2023)
Aluminum tantalum oxide thin films deposited at low temperature by pulsed direct current reactive magnetron sputtering for dielectric applications (2024)
Time and Energy-Resolved Investigation of the HiPIMS Discharge in Ar and Ar/N2 Atmospheres (2023)
On spokes in reactive Ar/N2 atmosphere using HiPIMS (2023)
Investigation of ionized metal flux fraction at industrial conditions (2023)
Novel Sputter Cathode Design to Obtain Very High Ionized Flux Fraction of Deposited Material in Industrial Conditions (2023)
Enhancing the ionized metal flux fraction in industrial conditions (2023)
NOVEL INDUSTRIAL SPUTTERING TECHNOLOGY WITH VERY HIGH IONIZED FLUX FRACTION OF DEPOSITED MATERIAL (2023)
Investigation of ionized metal flux fraction at industrial conditions (2023)
Comparison of Plasma-Polymerized Thin Films Deposited from 2-Methyl-2-oxazoline and 2-Ethyl-2-oxazoline: I Film Properties (2023)
Exploring Intercellular Dynamics: Ultra-Weak Biophoton Emission as a Novel Indicator of Altered Cell Functions and Disease in Oligospermia Mice (2023)
Influence of the heat field instability on the efficiency of organic precursor decomposition in the dual-channel microwave plasma torch (2022)
Temperature-friendly remote atmospheric pressure plasma source for plasma activation of materials (2023)
Sulfation of furcellaran and its effect on hemocompatibility in vitro (2024)
Testovací výbojová komora MUNI (2023)
Efficacy Comparison of Three Atmospheric Pressure Plasma Sources for Soybean Seed Treatment: Plasma Characteristics, Seed Properties, Germination (2023)
Complex characterisation of Cr-doped α-Al 2O3 for DBD applications (2024)
Study of SPS Sintering of Strontium-Doped Lanthanum Manganite (LSM) by Surface Modification of Powders Using DCSBD and ALD (2023)
PLASMA POLYMERIZATION: AN ALTERNATIVE METHOD OF FUNCTIONAL LAYER PREPARATION (2023)
Surface morphology of nanostructured plasma-polymer thin films deposited under dusty plasma conditions (2022)
Effect of Nb incorporation in Mo BC coatings on structural and mechanical properties — Ab initio modelling and experiment (2024)
Plasma Treatment of Large-Area Polymer Substrates for the Enhanced Adhesion of UV–Digital Printing (2024)
Sustainable remediation of paint factory wastewater using electrocoagulation (2024)
Modification of silicon-polyurethane-based sol–gel coatings through diverse plasma technologies: investigation of impact on surface properties (2024)
A Long-Term Study on the Bactericidal Effect of ZrN-Cu Nanostructured Coatings Deposited by an Industrial Physical Vapor Deposition System (2024)
Low-cost carbon-based sorbents for the removal of pharmaceuticals from wastewaters (2024)
Selective Cu electroplating enabled by surface patterning and enhanced conductivity of carbon fiber reinforced polymers upon air plasma etching (2024)
Characterization of randomly oriented strand boards manufactured from juvenile wood of underutilized wood species (2024)
PLASMA MODIFICATION OF POLYACRYLONITRILE POWDER OR SOLUTION PRIOR ELECTROSPINNING (2024)
Synthesis and characterization of ceramic high entropy carbide thin films from the Cr-Hf-Mo-Ta-W refractory metal system (2024)
Plasma-induced Polymerization and Grafting of Acrylic Acid on the Polypropylene Nonwoven Fabric Using Pulsed Underwater Diaphragm Electrical Discharge (2024)
Plasma-Treated g-C3Nx: Enhancing Photocatalytic Degradation Of Antibiotics (2024)
Spatially resolved optical emission analysis of spokes in HiPIMS utilising Al, Cr, Cu, Ti, and W targets (2024)
Prototyp optického prvku č. 1 s povrchovou úpravou (2023)
Synthesis and Characterization of High Entropy Ceramic Coatings from Cr-Hf-Mo-Ta-W Refractory Metal System (2024)
On the influence of strong- and weak-nitride forming elements on the preparation of refractory metal based high entropy nitrides by magnetron sputtering (2024)
Optimizing Electrospun Nanofibers for Enhanced Tissue Engineering Performance Assisted by Low-Temperature Atmospheric-Pressure Plasma Technology (2024)
Measurement of hydrogen radical concentration in DBD ingited at different frequencies (2024)
Enhancement of the dyeability and antibacterial properties of cotton fabric by plasma assisted cationization using chitosan and quaternized poly[bis(2‐chloroethyl) ether‐alt‐1,3‐bis[3‐(dimethylamino)propyl]urea (2024)
On direct-current magnetron sputtering at industrial conditions with high ionization fraction of sputtered species (2024)
Influence of Bonded Air- Versus Tin-side on the Shear Strength of Glass-to-Glass Joints of Transparent Epoxy Adhesive at Elevated Temperatures (2024)
Enhancement of ionized metal flux fraction without compromising deposition rate in industrial magnetron sputtering (2024)
MXene-Derived Oxide Nanoheterostructures for Photocatalytic Sulfamethoxazole Degradation (2024)
STUDY OF OZONE DESTRUCTION REACTION ON SURFACES (2024)
Porcine model of a complicated skin and soft tissue infection caused by Pseudomonas aeruginosa (2024)
Tailored MXene-derived Nano-Heterostructure Oxide for Peroxymonosulfate Activation in the Treatment of Municipal Wastewaters (2024)
Development of a-C:H coatings doped with trimethylsilyl acetate prepared using plasma enhanced chemical vapor deposition (2024)
High-voltage electrotrauma: Unmasking the threat of early anaerobic infection. (2024)
Biomateriály a biotechnologie v postantibiotické éře (2024)
Floating potential probes for process control during reactive magnetron sputtering (2024)
Different Grain Sizes of MgAl2O4 Doped Alumina and Its Influence on SPD, CDBD, and APTD (2024)
Two faces of the antimicrobial peptides and their relevance to burn wound infection (2024)
Phage Therapy Combined with Gum Karaya Hydrogels for Treatment of Multi-resistant Pseudomonas aeruginosa Deep Wound Infection in a Porcine Model (2024)
Antimicrobial Efficacy of Cathelicidin Peptides on Multidrug-Resistant Pseudomonas aeruginosa Strains (2024)
Porcinní model komplikované infekce kůže a měkkých tkání (2024)
Kombinovaná fágová terapie infekcí PVL-pozitivními kmeny Staphylococcus aureus (2024)
Development of a porcine model of skin and soft-tissue infection caused by Staphylococcus aureus, including methicillin-resistant strains suitable for testing topical antimicrobial agents (2024)
FTIR spectroscopy of gaseous products of atmospheric pressure coplanar barrier discharge for plasma assisted graphene oxide reduction (2023)
Advancing wastewater treatment: The efficacy of carbon-based electrochemical platforms in removal of pharmaceuticals (2024)
A complex study of photocatalytic oxidation pathways of antibiotics with graphitic carbon nitride–The way towards continuous flow conditions (2024)
Odebrat vše z výběru
Operace s vybranými výsledky
Export a tisk
Seznam vybraných záznamů
Další aplikace
Publikace
Informační systém
Přeskočit na horní lištuPřeskočit na hlavičkuPřeskočit na obsahPřeskočit na patičku
