DT3MK_STR2 Engineering Technology 2

Faculty of Education
Autumn 2008
Extent and Intensity
0/0/12. 4 credit(s). Type of Completion: zk (examination).
Teacher(s)
Ing. Zdeněk Píša, Ph.D. (lecturer)
Guaranteed by
Ing. Zdeněk Píša, Ph.D.
Department of Physics, Chemistry and Vocational Education – Faculty of Education
Contact Person: Miluše Čánská
Course Enrolment Limitations
The course is only offered to the students of the study fields the course is directly associated with.

The capacity limit for the course is 70 student(s).
Current registration and enrolment status: enrolled: 0/70, only registered: 0/70
fields of study / plans the course is directly associated with
Course objectives
Objective: To learn the basics teore třískového cutting tools and the right choice.
Syllabus
  • 1. Technological characteristics of machining process of the 2nd Coordinate system Instruments 3 Tool angles 4th Working angles 5th Technological features chips 6th Cutting power 7th Energy parameters of the process of working on the 8th The durability of the blades the 9th 10th Engineer Unit times Materials for cutting tools
Literature
  • AB SANDVIK COROMANT - SANDVIK CZ s.r.o. Produktivní obrábění kovů. Švédsko CMSE. 1997. 300s.
  • AB SANDVIK COROMANT - SANDVIK CZ s.r.o. Příručka obrábění - Kniha pro praktiky. (Přel. z: Modern Metal Sutting - A Practical Handbook. Překlad M. Kudela.), 1. vyd. Praha: Scientia, s.r.o.,1997. 857s., ed. J. Machač, J. Řasa, ISBN 91-97 22 99-4-6.
Assessment methods
oral exam
Language of instruction
Czech
Further comments (probably available only in Czech)
The course is taught annually.
The course is taught: in blocks.
Information on the extent and intensity of the course: 12.
The course is also listed under the following terms Autumn 2009, Autumn 2010, Autumn 2011, Autumn 2012, Spring 2013, Autumn 2013, Spring 2014.
  • Enrolment Statistics (Autumn 2008, recent)
  • Permalink: https://is.muni.cz/course/ped/autumn2008/DT3MK_STR2