DI3MK_STR2 Engineering Technology 2

Faculty of Education
Autumn 2013
Extent and Intensity
0/0/.8. 3 credit(s). Type of Completion: z (credit).
Teacher(s)
JUDr. Mgr. Ing. Kateřina Šmejkalová, PhD. (lecturer), Ing. Zdeněk Hodis, Ph.D. (deputy)
Mgr. Petr Novák, Ph.D. (lecturer)
Ing. Zdeněk Píša, Ph.D. (lecturer)
Guaranteed by
doc. RNDr. Petr Sládek, CSc.
Department of Physics, Chemistry and Vocational Education – Faculty of Education
Contact Person: Mgr. Bc. Lucie Viková
Supplier department: Department of Physics, Chemistry and Vocational Education – Faculty of Education
Course Enrolment Limitations
The course is only offered to the students of the study fields the course is directly associated with.
fields of study / plans the course is directly associated with
Course objectives
Learn the basics of theoretical cutting and the proper choice of instruments.
Syllabus
  • Content focus: 1st Technological characteristics of the machining process 2nd Coordinate system tools 3rd Tool angles 4th Working the angles 5th Technological characteristics of the chip 6th Cutting forces 7th Energy parameters of the machining process 8th Cutting edge tools 9th Unit of Mechanical Engineering Times 10th Materials for cutting tools
Literature
    required literature
  • Návody k programování. Cykly. 4. vydání, Erlangen, SIEMENS a.s., 2000, 320 s.
    recommended literature
  • AB SANDVIK COROMANT - SANDVIK CZ s.r.o. Produktivní obrábění kovů. Švédsko CMSE. 1997. 300s.
  • AB SANDVIK COROMANT - SANDVIK CZ s.r.o. Příručka obrábění - Kniha pro praktiky. (Přel. z: Modern Metal Sutting - A Practical Handbook. Překlad M. Kudela.), 1. vyd. Praha: Scientia, s.r.o.,1997. 857s., ed. J. Machač, J. Řasa, ISBN 91-97 22 99-4-6.
  • Návody k programování. Základy. 4. vydání SIEMENS a.s., 2000, 456s.
Teaching methods
lectures, class discussion
Assessment methods
oral exam
Language of instruction
Czech
Further comments (probably available only in Czech)
The course can also be completed outside the examination period.
The course is taught annually.
The course is taught: in blocks.
General note: Specializace - strojírentství.
Information on the extent and intensity of the course: 10.
The course is also listed under the following terms Autumn 2009, Autumn 2010, Autumn 2011, Autumn 2012, Spring 2013, Spring 2014.
  • Enrolment Statistics (Autumn 2013, recent)
  • Permalink: https://is.muni.cz/course/ped/autumn2013/DI3MK_STR2