TE2RC_SAZ Machines and Equipment

Faculty of Education
Spring 2015
Extent and Intensity
0/0/0. 6 credit(s). Type of Completion: z (credit).
Teacher(s)
Ing. Zdeněk Hodis, Ph.D. (seminar tutor)
Guaranteed by
doc. PhDr. Zdeněk Friedmann, CSc.
Department of Technical Education and Information Science – Faculty of Education
Contact Person: Gabriela Jančíková
Supplier department: Department of Technical Education and Information Science – Faculty of Education
Course Enrolment Limitations
The course is only offered to the students of the study fields the course is directly associated with.
fields of study / plans the course is directly associated with
Course objectives
Verification of knowledge of the physical part of the drive and knowledge of the requirements of engineers. The technical specification, which are common in technical practice.
Syllabus
  • 1. The role of the mechanics, and its distribution.
  • 2. Statics.
  • 3. Kinematics.
  • 4. Mechanical work, performance, efficiency, energy.
  • 5. Basic concepts and laws of mechanics of fluids.
  • 6. Basic concepts and laws of mechanics of air, steam and gas.
  • 7. Flexibility and strength.
  • 8. Stress of material in tension and pressure.
  • 9. Stress in shear (cut), bending and torsion.
  • 10. Strain beam and its calculation.
  • 11. Course torque and feed forces in the beam.
  • 12. Investigation of stress and isolated compound stress. The use of this effect in the manufacturing practice.
Literature
  • 1. Stejskal Vl.:: Mechanika III.,ČVUT Praha, 2001, 155 s., ISBN 80-01-02388-5.. .
  • Mošna F.: Principy a systémy v technice. SNTL Praha ,1986 . 224 s. 176-972-87.Mošna F.: Principy a systémy v technice. SNTL Praha ,1986 . 224 s. 176-972-87.Mošna F.: Principy a systémy v technice. SNTL Praha ,1986 . 224 s. 176-972-87.
  • Dubovská M.: Principy a systémy v technice . PdF B.Bystrica, 1986, 318 s.Dubovská M.: Principy a systémy v technice . PdF B.Bystrica, 1986, 318 s.Dubovská M.: Principy a systémy v technice . PdF B.Bystrica, 1986, 318 s.
Teaching methods
Lectures, theoretical preparation
Assessment methods
lecture, written exam
Language of instruction
Czech
Further comments (probably available only in Czech)
The course is taught annually.
The course is taught: in blocks.
Information on the extent and intensity of the course: 10 hodin.
The course is also listed under the following terms Spring 2005, Spring 2006, Spring 2007, Spring 2008, Spring 2009, Spring 2010, Spring 2011, Spring 2012, Spring 2013, Spring 2014, Spring 2016, Spring 2017, Spring 2018, Spring 2019, Spring 2020, Spring 2023, Spring 2024, Spring 2025.
  • Enrolment Statistics (Spring 2015, recent)
  • Permalink: https://is.muni.cz/course/ped/spring2015/TE2RC_SAZ