TE2RC_MTD Materials and Technology - Wood and Plastic

Faculty of Education
Autumn 2009
Extent and Intensity
0/0/0. 10 credit(s). Type of Completion: zk (examination).
Teacher(s)
PaedDr. Ing. Josef Pecina, CSc. (seminar tutor)
Guaranteed by
doc. PhDr. Zdeněk Friedmann, CSc.
Department of Technical Education and Information Science – Faculty of Education
Contact Person: Gabriela Jančíková
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
Course objectives
The aim of the course is the mastery of knowledge and skills on the basic properties and processing of wood and plastics, are part of teaching environmental problems and the use of materials in practice.
Syllabus
  • 1. Forest as a source of wood-definition and function of the forest, the forest, forest cultivation, production trees and other species, historical development of the relationship of man to the wood. 2. Logging, felling process, raw strain, assortment of forest production, protection of excavated materials. 3. Science of wood (home), biological nature of the creation of wood, macroscopic structure of wood, orthogonal anisotropy wood sections, a description of our use of wood and wood production. 4. Main features of the wood, drawing, smell, density, electrical, thermal and sound conductivity, hardness. 5. Physical properties of wood, water movement in wood, wood moisture content determination, the consequences of changes in humidity, sesychání, swelling, methods of storage and drying of wood. 6. Mechanical properties of wood-flexibility, strength, hardness, toughness 7. Technological properties of wood - workability, ability to hold mechanical fasteners, receiving treatment and coating materials. 8. Durability of wood and means to enhance the durability, impregnation, and coatings. 9. Defects of wood and their effect on the applicability of wood. 10. Introduction to the mechanical technology of wood, cutting, machining theory tools. 11. Sawing production, the vertical frame saw, manufacture of veneer sheets, timber and agglomerated materials, large-scale materials. 12. Description of the production tree-important characteristics and uses. 13. Nature and distribution of plastics, natural and synthetic macromolecular compounds, thermoplastics and reaktoplasty. 14. General properties of plastics, favorable and unfavorable characteristics of plastics. 15. Basic information about some plastics. 16. Basic information about some plastics - thermoplastics. 17. Getting to know plastic. 18. Industrial production of semi-finished plastic. 19. Industrial production of current products of plastics. 20. Laminated materials, laminates and cellular plastics. 21. Adhesives, advantages and disadvantages of bonding, bonding requirements. 22. Sticking traditional materials and plastics, thermoplastics bonding. 23. Paints.
Literature
  • PECINA, Pavel and Josef PECINA. Materiály a technologie- plasty. Brno: MU, 2006, 54 pp. ISBN 80-210-4100-5. info
  • PECINA, PAVEL and Josef PECINA. Materiály a technologie-dřevo. Brno: MU, 2006, 132 pp. ISBN 80-210-4013-0. info
Assessment methods
Subject to a close examination. Questions for the test-see syllabus.
Language of instruction
Czech
Further comments (probably available only in Czech)
The course is taught annually.
The course is taught: in blocks.
Information on the extent and intensity of the course: 15 hodin.
The course is also listed under the following terms Autumn 2004, Autumn 2005, Autumn 2006, Autumn 2007, Autumn 2008, Autumn 2010, Autumn 2011, Autumn 2012, Autumn 2013, Autumn 2014, Autumn 2015, Autumn 2016, Autumn 2017, Autumn 2018, Autumn 2019, Autumn 2022, Autumn 2023, Autumn 2024.
  • Enrolment Statistics (Autumn 2009, recent)
  • Permalink: https://is.muni.cz/course/ped/autumn2009/TE2RC_MTD