DI3MK_CAS1 Parts of machinery 1

Faculty of Education
Autumn 2010
Extent and Intensity
0/0/8. 3 credit(s). Type of Completion: z (credit).
Teacher(s)
Doc. Josef Chladil (lecturer), Ing. Zdeněk Píša, Ph.D. (deputy)
Ing. Zdeněk Píša, Ph.D. (lecturer)
Guaranteed by
doc. Ing. Jiří Strach, CSc.
Department of Physics, Chemistry and Vocational Education – Faculty of Education
Contact Person: Miluše Čánská
Course Enrolment Limitations
The course is only offered to the students of the study fields the course is directly associated with.

The capacity limit for the course is 100 student(s).
Current registration and enrolment status: enrolled: 0/100, only registered: 0/100
fields of study / plans the course is directly associated with
Course objectives
The subject "Parts of machines and is focused on the basic principles of design, principles of design and reliability of basic machine components and machine nodes. Course in the introductory section explains how to approach to solving design award, the principles on the technical documentation, dealing with used construction materials and basic principles of design of machine parts. In the latter part introduces principles of design and calculation circuit and the design and calculations of shafts, including the deposit. Poslech Fonetický přepis Slovník - Zobrazit podrobný slovník Překládejte přes 50 jazykůmijn vriendHjelp!국수haydi gidelimVær så snillबन्दरLangweiligsư tửשמחกาแฟお元気ですか?มีสีสันBuongiorno Principessa!miracolosoχρησμόςEs ist sehr interessant!Wie bitte?Wie spät ist es?Wie gehts?ПроститеPardon ??escargots¿Cómo estás?आज मेरा जन्मदिन हैं.Je ne sais pas !Wie heißen Sie?rougeLa voitureأحب كرة القدمさようならhoje está ensolaradoJe parle un petit peu français.παραλίαسلحفاةhelloDalší možnosti Překladače GoogleVyhledávejte nejlepší recepty na sushi přímo v japonštině! Poznejte sílu Přeloženého vyhledávání Google.Narazili jste na web v cizím jazyce? Stáhněte si Google Chrome, rychlý a bezpečný webový prohlížeč s vestavěným překladačem.Co že to slovo znamená? Nainstalujte si Google Toolbar a cizí slova už vám nikdy nebudou na obtíž.Chcete, aby si váš blog mohli přečíst i vaši norští fanoušci? Nainstalujte prvek Překladače Google a usnadněte jim překlad. Překladač Google pro moje:VyhledáváníVideaE-mailTelefonChatFirmyO Překladači GoogleVypnout okamžitý překladOchrana osobních údajůNápověda ©2010Nástroje pro firmyTranslator ToolkitO Překladači GoogleBlogOchrana osobních údajůNápověda
Syllabus
  • Content focus: Design Methodology and Design Strategy designer Technological design Product categories Creation of technical documentation - normalization Screening Dimensioning Toleration Geometric accuracy of the shape and position Construction Materials Metallic Materials Nonmetallic Materials The reliability of machine parts principle sizing Limit states Variable loading Fatigue fracture Brittle fracture Reliability Bolted connections Force ratios in the screws Screw connection without bias Coupling with bias A welded joint The welding process Principles for design of welds Weld Sizing Heat treatment of welds Soldered and glued joints Soft soldering Brazing Resistance welds Principles for design of soldered joints E. Study subjects Glued joints - theory of bonding Strength of glued joints Splined joints Wedges - types, strength of V-joints Pens - types, strength of connections with feathers Slot links Prismatic connection Pressed and clamp connections Pressed connections - load bearing, assembly The combination clamping and bucking - load bearing Axes and shaft - shaft calculations, fatigue strength, materials Structural design, components with notches Optimization of dimensions, materials Design the basic dimensions Axes and shafts - fatigue strength Critical frequency Effect of support stiffness Tribology Friction conditions Theory of wear Fluid friction Plain bearings Construction Materials Bearing Life Rolling Bearings Construction of rolling bearings Bearing life and durability Kinematics bearings Rolling Bearings Proposal rolling storage Operating conditions Bearing Lubrication Information for
Literature
    required literature
  • BOHÁČEK, F., aj. Části a mechanismy strojů I . Brno: Skriptum VUT FSI v Brně.
    not specified
  • BOHÁČEK, F., aj. Části a mechanismy strojů II Brno: Skriptum VUT FSI v Brně
Teaching methods
lecture, seminar
Assessment methods
oral examination
Language of instruction
Czech
Further comments (probably available only in Czech)
Study Materials
The course can also be completed outside the examination period.
The course is taught annually.
The course is taught: in blocks.
General note: Určeno pro specializaci - strojírenství.
Information on the extent and intensity of the course: 8.
Teacher's information
http://boss.ped.muni.cz/opory/strojírenství/.htm
The course is also listed under the following terms Autumn 2009, Autumn 2011, Autumn 2012, Autumn 2013.
  • Enrolment Statistics (Autumn 2010, recent)
  • Permalink: https://is.muni.cz/course/ped/autumn2010/DI3MK_CAS1