PdF:TI9005 Polymer processing from A to Z - Course Information
TI9005 E-COURSE: Polymer processing from A to Z
Faculty of EducationSpring 2024
- Extent and Intensity
- 0/0/0. 2 credit(s) (plus 1 for the colloquium). Recommended Type of Completion: z (credit). Other types of completion: k (colloquium).
- Teacher(s)
- Ing. Zdeněk Hodis, Ph.D. (seminar tutor)
Mgr. Jitka Šťastná (seminar tutor)
Mgr. Petr Vybíral, Ph.D. (seminar tutor) - Guaranteed by
- Mgr. Jitka Šťastná
Department of Technical Education and Information Science – Faculty of Education
Contact Person: Mgr. Jitka Šťastná
Supplier department: Department of Technical Education and Information Science – Faculty of Education - Prerequisites
- ! FAKULTA ( FI )
The course is open to all those interested in the issue of processing plastics in traditional and non-traditional ways. No input knowledge of materials is required. - Course Enrolment Limitations
- The course is also offered to the students of the fields other than those the course is directly associated with.
The capacity limit for the course is 100 student(s).
Current registration and enrolment status: enrolled: 77/100, only registered: 7/100, only registered with preference (fields directly associated with the programme): 0/100 - fields of study / plans the course is directly associated with
- Technology and IT for Education (programme PdF, B-TE3S) (2)
- Lower Secondary School Teacher Training in Technology and IT Education (programme PdF, N-TE2) (2)
- Course objectives
- The aim of this course is focused on introducing various types of industry methods and different types of polymers to all participants of this course. These knowledge can be used in self production of each participant.
- Learning outcomes
- The outputs of this course, which the participant will apply after graduation, can include: - ability to recognize thermoplastic and thermoset, to be able to orientate in basic properties necessary for practical work with them - ability to orientate in commonly available commercial products of specialized shops - describe and apply individual processing methods (cutting, sawing, bending, casting, vacuuming, etc.) on a specific type of polymer - to implement own projects according to studied materials -
- Syllabus
- Course syllabus: Introducing to the course: 1. Introduction to the issue of polymeric materials (history, nomenclature, division of plastics, interesting facts); Introduction of individual materials and their possibilities of use: 2. Thermoplastics 3. Thermosets 4. Elastomers; Practical part - individual products (make your own at home): 5. Home two-component silicone compound for the production of plastic molds 6. Home silicone case for mobile phone 6. Shrink films and products from it 7. stamps, dolls, covers and other things from foam (Moosegummi) 8. Baking materials (Cernit, Fimo ...) - bowls, jewelry, boxes and similar products 9. Plexiglas chocolate molds 10. amazing world of 3D printing (PLA, ABS, PETG, etc.) 11. 3D pen and creations from it 12. homemade chewing gum made of natural rubber 13. Jewelry from PET bottles 14. ideas for working with a gluegun; Final part of the course - online test
- Literature
- recommended literature
- https://www.silikonysro.cz/
- THOMAS, Alena. Děláme si to doma sami: domácí kosmetika, drogerie a lékárna. V Brně: Jota, 2014. Populárně naučná. ISBN 978-80-7462-535-0.
- not specified
- BALADA, Adolf. Od ropy k plastickým hmotám. Praha: Státní nakladatelství technické literatury, 1962. Řada teoretické literatury.
- NEMRAVOVÁ, Petra. Fimo : šperky z polymerové hmoty. 1. vyd. Praha: Grada, 2010, 112 s. ISBN 9788024733128. info
- BRODEK, Ayako. Šperky origami : přes 40 osobitých návrhů - stačí jen složit a nosit. Vyd. 1. V Praze: Metafora, 2008, 128 s. ISBN 9788073591458. info
- PECINA, Pavel and Josef PECINA. Materiály a technologie- plasty. Brno: MU, 2006, 54 pp. ISBN 80-210-4100-5. info
- ŠKÁRA, Ivan and Vít HRABINA. Materiály a technologie : plasty. Brno: Pedagogická fakulta Masarykovy univerzity, 1997, 31 s. info
- LIDAŘÍK, Miloslav. Epoxydové pryskyřice. 2., dopl. vyd. Praha: Státní nakladatelství technické literatury, 1961, 289 s. URL info
- Teaching methods
- teaching in the form of an interactive curriculum, individual teaching = self-study, practical independent production of products according to the syllabus
- Assessment methods
- CONDITIONS FOR OBTAINING A COLLOQUIUM (K):
After studying the interactive e-course syllabus, the following condition must be met to obtain the colloquium: Successfully pass all midterm tests from each chapter of the course during the semester and also pass the final online test afterwards - this test can be taken at any time during the study of the e-course, you must have at least 80% of the answers correct to pass. The whole course is simultaneously tutored by weekly consultations.
CREDIT REQUIREMENTS (Z):
A condition for obtaining credit is the successful completion of all midterm exams from the individual chapters of the course and the subsequent submission of a term paper in the form of a semester-long polymer project - the creation of a comprehensive manual for the production of two custom handmade polymer products created from polymer materials (baking compounds, Plexiglas, polystyrene, PET, epoxy resin...). The whole course is simultaneously tutored by weekly consultations. - Language of instruction
- Czech
- Further comments (probably available only in Czech)
- Study Materials
The course is taught annually.
Note related to how often the course is taught: online kurz v rozsahu 60 hod.
Information on the extent and intensity of the course: online kurz v rozsahu 60 hod. (20 hod. studium odborných textů a e-learningových osnov, 35 hod. zhotovování výrobků dle návodů pro každé z témat e-learningu, 5 hod. příprava praktických výstupů ke kolokviu a příprava na test). - Teacher's information
- https://is.muni.cz/auth/el/ped/jaro2024/TI9005/index.qwarp
Link to interactive course syllabus.
- Enrolment Statistics (Spring 2024, recent)
- Permalink: https://is.muni.cz/course/ped/spring2024/TI9005