F2180 Physical laboratory 1

Faculty of Science
Spring 2024
Extent and Intensity
0/3/0. 5 credit(s). Type of Completion: z (credit).
Teacher(s)
Mgr. Jana Jurmanová, Ph.D. (seminar tutor)
RNDr. Zlata Kelar Tučeková, PhD. (seminar tutor)
RNDr. Pavel Konečný, CSc. (seminar tutor)
RNDr. Richard Krumpolec, PhD. (seminar tutor)
Mgr. Martina Mrkvičková, Ph.D. (seminar tutor)
doc. Mgr. Zdeněk Navrátil, Ph.D. (seminar tutor)
Mgr. Slavomír Sihelník, Ph.D. (seminar tutor)
Mgr. Petr Skopal (seminar tutor)
Mgr. František Zelenák (seminar tutor)
Lukáš Lepka (assistant)
RNDr. Luboš Poláček (assistant)
Mojmír Polnický (assistant)
Prokop Štěpánek (assistant)
Guaranteed by
doc. Mgr. Zdeněk Navrátil, Ph.D.
Department of Plasma Physics and Technology – Physics Section – Faculty of Science
Contact Person: doc. Mgr. Zdeněk Navrátil, Ph.D.
Supplier department: Department of Plasma Physics and Technology – Physics Section – Faculty of Science
Timetable of Seminar Groups
F2180/01: Mon 19. 2. to Sun 26. 5. Tue 13:00–15:50 Fp1,02039, P. Konečný
F2180/02: Mon 19. 2. to Sun 26. 5. Mon 11:00–13:50 Fp1,02039, Z. Kelar Tučeková
F2180/03: Mon 19. 2. to Sun 26. 5. Mon 14:00–16:50 Fp1,02039, Z. Kelar Tučeková
F2180/04: Mon 19. 2. to Sun 26. 5. Mon 17:00–19:50 Fp1,02039, J. Jurmanová, M. Mrkvičková
F2180/05: Mon 19. 2. to Sun 26. 5. Wed 17:00–19:50 Fp1,02039, R. Krumpolec
F2180/06: Mon 19. 2. to Sun 26. 5. Wed 13:00–15:50 Fp1,02039, P. Konečný
F2180/07: Mon 19. 2. to Sun 26. 5. Tue 16:00–18:50 Fp1,02039, Z. Navrátil
F2180/08: Mon 19. 2. to Sun 26. 5. Thu 16:00–18:50 Fp1,02039, R. Krumpolec
F2180/09: Mon 19. 2. to Sun 26. 5. Wed 8:00–10:50 Fp1,02039, J. Jurmanová, M. Mrkvičková
F2180/10: Mon 19. 2. to Sun 26. 5. Tue 10:00–12:50 Fp1,02039, Z. Navrátil
Prerequisites (in Czech)
Mechanika a termika v rozsahu úvodní přednášky kurzu obecné fyziky.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
fields of study / plans the course is directly associated with
Course objectives
The aim of the course is to provide students with the basics of experimental work in physics and at the same time to complete the basic course of physics with a practical part focused on experiments in mechanics, thermics and electricity. The specific objectives are to teach students work in the laboratory, methods of statistical data processing, critical analysis of results and finally the writing of scientific reports from the measurements.
Learning outcomes
At the end of the course students get the following skills:
Measurement of the basic physical quantities in Mechanics, Thermics a Electricity.
Evaluation of the experimental data including experimental uncertainty analysis.
Ability to write a report.
Syllabus
  • 1. Introduction, experimental report, safety in laboratory. Theory of experimental errors. 2. Density of solid cylinder. 3. Measurement of electrical resistance. 4. Density, viscosity and surface tension of liquids. 5. Local free-fall acceleration - reverse pendulum. 6. Young modulus and shear modulus, electrical calorimeter, preparation part. 7. Electrical calorimeter, experimental part. 8. Poisson constant of air. 9. Measurement of temperature. 10. Measurement of voltage and current. 11. Thermal conductivity, preparation part. 12. Thermal conductivity, experimental part.
Literature
  • PÁNEK, Petr. Úvod do fyzikálních měření. Brno: skripta PřF MU, 2001. info
  • BROŽ, Jaromír. Základy fyzikálních měření. 1. vyd. Praha: Státní pedagogické nakladatelství, 1983, 669 s. URL info
  • NOVÁK, M. a kol. Fyzikální praktikum 1. Brno, 1982. info
Teaching methods
Laboratory exercises.
Assessment methods
The 60% success at electronic tests solved during the semester, measurement of all given experimental problems and successful hand-in of all measurement reports (including upload of the final version of the report into IS homework vault with plagerism control) are required to obtain the credit. The measurement report has to be submitted not later than two weeks after the measurement. To be let to measure, it is required to pass (60 %) written test from the theory of measurement errors in the third week of semester within the learning of the first two teaching blocks and the succesfull pass of the electronic test of the measurement problem. Student writes a laboratory journal during the measurement and submits the copy electronically to IS.
Language of instruction
Czech
Further Comments
Study Materials
The course is taught annually.
Listed among pre-requisites of other courses
The course is also listed under the following terms Spring 2008 - for the purpose of the accreditation, Spring 2011 - only for the accreditation, Spring 2000, Spring 2001, Spring 2002, Spring 2003, Spring 2004, Spring 2005, Spring 2006, Spring 2007, Spring 2008, Spring 2009, Spring 2010, Spring 2011, Spring 2012, spring 2012 - acreditation, Spring 2013, Spring 2014, Spring 2015, Spring 2016, Spring 2017, spring 2018, Spring 2019, Spring 2020, Spring 2021, Spring 2022, Spring 2023, Spring 2025.
  • Enrolment Statistics (recent)
  • Permalink: https://is.muni.cz/course/sci/spring2024/F2180