TI9005 E-COURSE: Polymer processing from A to Z

Faculty of Education
Autumn 2021
Extent and Intensity
0/0/0. 3 credit(s) (plus 1 for the colloquium). Recommended Type of Completion: z (credit). Other types of completion: k (colloquium).
Teacher(s)
Ing. Zdeněk Hodis, Ph.D. (seminar tutor)
Mgr. Jitka Šťastná (seminar tutor)
Mgr. Petr Vybíral, Ph.D. (seminar tutor)
Guaranteed by
Mgr. Jitka Šťastná
Department of Technical Education and Information Science – Faculty of Education
Contact Person: Mgr. Jitka Šťastná
Supplier department: Department of Technical Education and Information Science – Faculty of Education
Prerequisites
The course is open to all those interested in the issue of processing plastics in traditional and non-traditional ways. No input knowledge of materials is required.
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
The capacity limit for the course is 400 student(s).
Current registration and enrolment status: enrolled: 62/400, only registered: 0/400, only registered with preference (fields directly associated with the programme): 0/400
fields of study / plans the course is directly associated with
Course objectives
The aim of this course is focused on introducing various types of industry methods and different types of polymers to all participants of this course. These knowledge can be used in self production of each participant.
Learning outcomes
The outputs of this course, which the participant will apply after graduation, can include: - ability to recognize thermoplastic and thermoset, to be able to orientate in basic properties necessary for practical work with them - ability to orientate in commonly available commercial products of specialized shops - describe and apply individual processing methods (cutting, sawing, bending, casting, vacuuming, etc.) on a specific type of polymer - to implement own projects according to studied materials -
Syllabus
  • Course syllabus: Introducing to the course: 1. Introduction to the issue of polymeric materials (history, nomenclature, division of plastics, interesting facts); Introduction of individual materials and their possibilities of use: 2. Thermoplastics 3. Thermosets 4. Elastomers; Practical part - individual products (make your own at home): 5. Home two-component silicone compound for the production of plastic molds 6. Home silicone case for mobile phone 6. Shrink films and products from it 7. stamps, dolls, covers and other things from   foam (Moosegummi) 8. Baking materials (Cernit, Fimo ...) - bowls, jewelry, boxes and similar products 9. Plexiglas chocolate molds 10. amazing world of 3D printing (PLA, ABS, PETG, etc.) 11. 3D pen and creations from it 12. homemade chewing gum made of natural rubber 13. Jewelry from PET bottles 14. ideas for working with a gluegun; Final part of the course - online test
Literature
    recommended literature
  • THOMAS, Alena. Děláme si to doma sami: domácí kosmetika, drogerie a lékárna. V Brně: Jota, 2014. Populárně naučná. ISBN 978-80-7462-535-0.
  • https://www.silikonysro.cz/
    not specified
  • BALADA, Adolf. Od ropy k plastickým hmotám. Praha: Státní nakladatelství technické literatury, 1962. Řada teoretické literatury.
  • NEMRAVOVÁ, Petra. Fimo : šperky z polymerové hmoty. 1. vyd. Praha: Grada, 2010, 112 s. ISBN 9788024733128. info
  • BRODEK, Ayako. Šperky origami : přes 40 osobitých návrhů - stačí jen složit a nosit. Vyd. 1. V Praze: Metafora, 2008, 128 s. ISBN 9788073591458. info
  • PECINA, Pavel and Josef PECINA. Materiály a technologie- plasty. Brno: MU, 2006, 54 pp. ISBN 80-210-4100-5. info
  • ŠKÁRA, Ivan and Vít HRABINA. Materiály a technologie : plasty. Brno: Pedagogická fakulta Masarykovy univerzity, 1997, 31 s. info
  • LIDAŘÍK, Miloslav. Epoxydové pryskyřice. 2., dopl. vyd. Praha: Státní nakladatelství technické literatury, 1961, 289 s. URL info
Teaching methods
teaching in the form of an interactive curriculum, individual teaching = self-study, practical independent production of products according to the syllabus
Assessment methods
After studying the interactive syllabus of the e-course, the following condition must be met in order to obtain a colloquium: Successfully pass the final online test - this test can be taken at any time during the study of the e-course, the test consists of   20 questions without a time limit - to successfully pass it is necessary to have at least 12 questions correctly (60%). OPTIONAL (on a voluntary basis): Do you make interesting things from polymers in your free time or with your children? If so, and would like to share these creations with us, you can do so through a photo that you upload to the submission room of this item. Your creations will be an inspiration to others. Just submit a photo of min. one product made by hand (it can be a product made at home according to the curriculum or a product made with children);
Language of instruction
Czech
Further comments (probably available only in Czech)
Study Materials
The course is taught annually.
Note related to how often the course is taught: online kurz v rozsahu 60 hod.
Information on the extent and intensity of the course: online kurz v rozsahu 60 hod. (20 hod. studium odborných textů a e-learningových osnov, 35 hod. zhotovování výrobků dle návodů pro každé z témat e-learningu, 5 hod. příprava praktických výstupů ke kolokviu a příprava na test).
Teacher's information
https://is.muni.cz/auth/el/ped/podzim2021/TI9005/index.qwarp
Link to interactive course syllabus.
The course is also listed under the following terms autumn 2020, Spring 2021, Spring 2022, Autumn 2022, Spring 2023, Autumn 2023, Spring 2024, Autumn 2024, Spring 2025.
  • Enrolment Statistics (Autumn 2021, recent)
  • Permalink: https://is.muni.cz/course/ped/autumn2021/TI9005