G7531 Microanalysis course

Faculty of Science
Autumn 2011 - acreditation

The information about the term Autumn 2011 - acreditation is not made public

Extent and Intensity
1/0. 1 credit(s). Type of Completion: z (credit).
Teacher(s)
Mgr. Renata Čopjaková, Ph.D. (lecturer)
doc. Mgr. Radek Škoda, Ph.D. (lecturer)
Guaranteed by
doc. RNDr. Rostislav Melichar, Dr.
Department of Geological Sciences – Earth Sciences Section – Faculty of Science
Contact Person: doc. Mgr. Martin Ivanov, Dr.
Prerequisites (in Czech)
( (!(PROGRAM(B-GE)||PROGRAM(N-GE)||PROGRAM(D-GE)||PROGRAM(D-GE4)||PROGRAM(C-CV))) || (NOW( G0101 Occupational healt and safety )&&NOW( C7777 Handling chemicals )))
Course Enrolment Limitations
The course is also offered to the students of the fields other than those the course is directly associated with.
The capacity limit for the course is 34 student(s).
Current registration and enrolment status: enrolled: 0/34, only registered: 0/34, only registered with preference (fields directly associated with the programme): 0/34
fields of study / plans the course is directly associated with
there are 58 fields of study the course is directly associated with, display
Course objectives
Main objectives can be summarized as follows: to understanding the basic principles of electron microscopy and microanalysis training of SEM, EDX, and WDX analytical problems on electron microscope and microprobe
Syllabus
  • SEM - basic function basic principles of elektron microscopy and microanalysis EDX analysis WDX analysis possibility and constrains of EMPA utilisation of EMPA
Literature
  • REED, S. J. B. Electron microprobe analysis and scanning electron microscopy in geology. 1st pub. Cambridge: Cambridge University Press, 1996, xii, 201 s. ISBN 0-521-48350-6. info
Assessment methods
intensive course, practical examination
Language of instruction
Czech
Further comments (probably available only in Czech)
The course is taught once in two years.
Information on the per-term frequency of the course: Bude otevřen v podzimním semestru 2010/2011.
The course is taught: every week.
The course is also listed under the following terms Autumn 2007 - for the purpose of the accreditation, Autumn 2010 - only for the accreditation, Autumn 2007, Autumn 2008, Autumn 2010, Autumn 2012, Autumn 2014, Autumn 2016, Autumn 2018, Autumn 2020, Autumn 2022, Autumn 2024.